| Age | Commit message (Collapse) | Author |
|---|
|
It is possible for the ->fopen callback from lockd into nfsd to find that an
answer cannot be given straight away (an upcall is needed) and so the request
has to be 'dropped', to be retried later. That error status is not currently
propagated back.
So:
Change nlm_fopen to return nlm error codes (rather than a private
protocol) and define a new nlm_drop_reply code.
Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply
when this error comes back.
Cause svc_process to drop a request which returns a status of
rpc_drop_reply.
[akpm@osdl.org: fix warning storm]
Cc: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Coverity noticed that the error handling code in the NFSv4 callback client
sets cb->cb_client to NULL, then calls rpc_shutdown_client with the NULL
pointer.
Coverity: #cid 1397
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We weren't actually checking for SHARE_ACCESS_WRITE, with the result that the
owner could open a non-writeable file for write!
Continue to allow DENY_WRITE only with write access.
Thanks to Jim Rees for reporting the bug.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
If a client creates a file using an open which sets the mode to 000, or if a
chmod changes permissions after a file is opened, then situations may arise
where an NFS client knows that some IO is permitted (because a process holds
the file open), but the NFS server does not (because it doesn't know about the
open, and only sees that the IO conflicts with the current mode of the file).
As a hack to solve this problem, NFS servers normally allow the owner to
override permissions on IO. The client can still enforce correct
permissions-checking on open by performing an explicit access check.
In NFSv4 the client can rely on the explicit on-the-wire open instead of an
access check.
Therefore we should not be allowing the owner to override permissions on an
over-the-wire open!
However, we should still allow the owner to override permissions in the case
where the client is claiming an open that it already made either before a
reboot, or while it was holding a delegation.
Thanks to Jim Rees for reporting the bug.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
There is some confusion about the meaning of 'bufsz' for a sunrpc server.
In some cases it is the largest message that can be sent or received. In
other cases it is the largest 'payload' that can be included in a NFS
message.
In either case, it is not possible for both the request and the reply to be
this large. One of the request or reply may only be one page long, which
fits nicely with NFS.
So we remove 'bufsz' and replace it with two numbers: 'max_payload' and
'max_mesg'. Max_payload is the size that the server requests. It is used
by the server to check the max size allowed on a particular connection:
depending on the protocol a lower limit might be used.
max_mesg is the largest single message that can be sent or received. It is
calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and
with PAGE_SIZE added to overhead. Only one of the request and reply may be
this size. The other must be at most one page.
Cc: Greg Banks <gnb@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Use all the pieces set up so far to implement referral support, allowing
return of NFS4ERR_MOVED and fs_locations attribute.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Encode fs_locations attribute.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Define FS locations structures, some functions to manipulate them, and add
code to parse FS locations in downcall and add to the exports structure.
[bfields@fieldses.org: bunch of fixes and cleanups]
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Store the export path in the svc_export structure instead of storing only the
dentry. This will prevent the need for additional d_path calls to provide
NFSv4 fs_locations support.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
totalram is measured in pages, not bytes, so PAGE_SHIFT must be used when
trying to find 1/4096 of RAM.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It is legal to have zero-length NFSv4 acls; they just deny everything.
Also, nfs4_acl_nfsv4_to_posix will always return with pacl and dpacl set on
success, so the caller doesn't need to check this.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
There's no need to handle the case where the caller passes in null for pacl or
dpacl; no caller does that, because it would be a dumb thing to do.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We can be a little more flexible about the flags allowed for inheritance (in
particular, we can deal with either the presence or the absence of
INHERIT_ONLY), but we should probably reject other combinations that we don't
understand.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Use a different nfsv4->(draft posix) acl mapping which is
1. completely backwards compatible,
2. accepts any nfsv4 acl, and
3. errs on the side of restricting permissions.
In detail:
1. completely backwards compatible: The new mapping produces the
same result on any acl produced by the existing (draft
posix)->nfsv4 mapping; the one exception is that we no longer
attempt to guess the value of the mask by assuming certain denies
represent the mask. Since the server still keeps track of the mask
locally, sequences of chmod's will still be handled fine; the only
thing this will change is sequences of chmod's with intervening
read-modify-writes of the acl. That last case just isn't worth the
trouble and the possible misrepresentations of the user's intent
(if we guess that a certain deny indicates masking is in effect
when it really isn't).
2. accepts any nfsv4 acl: That's not quite true: we still reject
acls that use combinations of inheritance flags that we don't
support. We also reject acls that attempt to explicitly deny
read_acl or read_attributes permissions, or that attempt to deny
write_acl or write_attributes permissions to the owner of the file.
3. errs on the side of restricting permissions: one exception to
this last rule: we totally ignore some bits (write_owner,
synchronize, read_named_attributes, etc.) that are completely alien
to our filesystem semantics, in some cases even if that would mean
ignoring an explicit deny that we have no intention of enforcing.
Excepting that, the posix acl produced should be the most
permissive acl that is not more permissive than the given nfsv4
acl.
And the new code's shorter, too. Neato.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The previous patch enables some minor simplification here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We could be using more common code in exp_pseudoroot(). This will also
simplify some changes we need to make later.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The NFSACL patches introduced support for multiple RPC services listening on
the same transport. However, only the first of these services was registered
with portmapper. This was perfectly fine for nfsacl, as you traditionally do
not want these to show up in a portmapper listing.
The patch below changes the default behavior to always register all services
listening on a given transport, but retains the old behavior for nfsacl
services.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make the nfsd read-ahead params cache more SMP-friendly by changing the single
global list and lock into a fixed 16-bucket hashtable with per-bucket locks.
This reduces spinlock contention in nfsd_read() on read-heavy workloads on
multiprocessor servers.
Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients each doing 1K
streaming reads at full line rate. The server had 128 nfsd threads, which
sizes the RA cache at 256 entries, of which only a handful were used. Flat
profiling shows nfsd_read(), including the inlined nfsd_get_raparms(), taking
10.4% of each CPU. This patch drops the contribution from nfsd() to 1.71% for
each CPU.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The max possible is the maximum RPC payload. The default depends on amount of
total memory.
The value can be set within reason as long as no nfsd threads are currently
running. The value can also be ready, allowing the default to be determined
after nfsd has started.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The limit over UDP remains at 32K. Also, make some of the apparently
arbitrary sizing constants clearer.
The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of
the rqstp. This allows it to be different for different protocols (udp/tcp)
and also allows it to depend on the servers declared sv_bufsiz.
Note that we don't actually increase sv_bufsz for nfs yet. That comes next.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
.. by allocating the array of 'kvec' in 'struct svc_rqst'.
As we plan to increase RPCSVC_MAXPAGES from 8 upto 256, we can no longer
allocate an array of this size on the stack. So we allocate it in 'struct
svc_rqst'.
However svc_rqst contains (indirectly) an array of the same type and size
(actually several, but they are in a union). So rather than waste space, we
move those arrays out of the separately allocated union and into svc_rqst to
share with the kvec moved out of svc_tcp_recvfrom (various arrays are used at
different times, so there is no conflict).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We are planning to increase RPCSVC_MAXPAGES from about 8 to about 256. This
means we need to be a bit careful about arrays of size RPCSVC_MAXPAGES.
struct svc_rqst contains two such arrays. However the there are never more
that RPCSVC_MAXPAGES pages in the two arrays together, so only one array is
needed.
The two arrays are for the pages holding the request, and the pages holding
the reply. Instead of two arrays, we can simply keep an index into where the
first reply page is.
This patch also removes a number of small inline functions that probably
server to obscure what is going on rather than clarify it, and opencode the
needed functionality.
Also remove the 'rq_restailpage' variable as it is *always* 0. i.e. if the
response 'xdr' structure has a non-empty tail it is always in the same pages
as the head.
check counters are initilised and incr properly
check for consistant usage of ++ etc
maybe extra some inlines for common approach
general review
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Magnus Maatta <novell@kiruna.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Arrgg.. We cannot 'lockd_up' before 'svc_addsock' as we don't know the
protocol yet.... So switch it around again and save the name of the created
sockets so that it can be closed if lock_up fails.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
nfsd/portlist
The refcount that nfsd holds on lockd is based on the number of open sockets.
So when we close a socket, we should decrement the ref (with lockd_down).
Currently when a socket is closed via writing to the portlist file, that
doesn't happen.
So: make sure we get an error return if the socket that was requested does is
not found, and call lockd_down if it was.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
nfsv2 needs the I_MUTEX_PARENT on the directory when creating a file too.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch converts an if () BUG(); construct to BUG_ON();
which occupies less space, uses unlikely and is safer when
BUG() is disabled.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
|
|
These patches make the kernel pass 64-bit inode numbers internally when
communicating to userspace, even on a 32-bit system. They are required
because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS
for example. The 64-bit inode numbers are then propagated to userspace
automatically where the arch supports it.
Problems have been seen with userspace (eg: ld.so) using the 64-bit inode
number returned by stat64() or getdents64() to differentiate files, and
failing because the 64-bit inode number space was compressed to 32-bits, and
so overlaps occur.
This patch:
Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit
inode number so that 64-bit inode numbers can be passed back to userspace.
The stat functions then returns the full 64-bit inode number where
available and where possible. If it is not possible to represent the inode
number supplied by the filesystem in the field provided by userspace, then
error EOVERFLOW will be issued.
Similarly, the getdents/readdir functions now pass the full 64-bit inode
number to userspace where possible, returning EOVERFLOW instead when a
directory entry is encountered that can't be properly represented.
Note that this means that some inodes will not be stat'able on a 32-bit
system with old libraries where they were before - but it does mean that
there will be no ambiguity over what a 32-bit inode number refers to.
Note similarly that directory scans may be cut short with an error on a
32-bit system with old libraries where the scan would work before for the
same reasons.
It is judged unlikely that this situation will occur because modern glibc
uses 64-bit capable versions of stat and getdents class functions
exclusively, and that older systems are unlikely to encounter
unrepresentable inode numbers anyway.
[akpm: alpha build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
while doing a kernel make modules_install install over an NFS mount.
=============================================
[ INFO: possible recursive locking detected ]
---------------------------------------------
nfsd/9550 is trying to acquire lock:
(&inode->i_mutex){--..}, at: [<c034c845>] mutex_lock+0x1c/0x1f
but task is already holding lock:
(&inode->i_mutex){--..}, at: [<c034c845>] mutex_lock+0x1c/0x1f
other info that might help us debug this:
2 locks held by nfsd/9550:
#0: (hash_sem){..--}, at: [<cc895223>] exp_readlock+0xd/0xf [nfsd]
#1: (&inode->i_mutex){--..}, at: [<c034c845>] mutex_lock+0x1c/0x1f
stack backtrace:
[<c0103508>] show_trace_log_lvl+0x58/0x152
[<c0103b8b>] show_trace+0xd/0x10
[<c0103c2f>] dump_stack+0x19/0x1b
[<c012aa57>] __lock_acquire+0x77a/0x9a3
[<c012af4a>] lock_acquire+0x60/0x80
[<c034c6c2>] __mutex_lock_slowpath+0xa7/0x20e
[<c034c845>] mutex_lock+0x1c/0x1f
[<c0162edc>] vfs_unlink+0x34/0x8a
[<cc891d98>] nfsd_unlink+0x18f/0x1e2 [nfsd]
[<cc89884f>] nfsd3_proc_remove+0x95/0xa2 [nfsd]
[<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
[<c033e84d>] svc_process+0x3a5/0x5ed
[<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
[<c0101005>] kernel_thread_helper+0x5/0xb
DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
Leftover inexact backtrace:
[<c0103b8b>] show_trace+0xd/0x10
[<c0103c2f>] dump_stack+0x19/0x1b
[<c012aa57>] __lock_acquire+0x77a/0x9a3
[<c012af4a>] lock_acquire+0x60/0x80
[<c034c6c2>] __mutex_lock_slowpath+0xa7/0x20e
[<c034c845>] mutex_lock+0x1c/0x1f
[<c0162edc>] vfs_unlink+0x34/0x8a
[<cc891d98>] nfsd_unlink+0x18f/0x1e2 [nfsd]
[<cc89884f>] nfsd3_proc_remove+0x95/0xa2 [nfsd]
[<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
[<c033e84d>] svc_process+0x3a5/0x5ed
[<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
[<c0101005>] kernel_thread_helper+0x5/0xb
=============================================
[ INFO: possible recursive locking detected ]
---------------------------------------------
nfsd/9580 is trying to acquire lock:
(&inode->i_mutex){--..}, at: [<c034cc1d>] mutex_lock+0x1c/0x1f
but task is already holding lock:
(&inode->i_mutex){--..}, at: [<c034cc1d>] mutex_lock+0x1c/0x1f
other info that might help us debug this:
2 locks held by nfsd/9580:
#0: (hash_sem){..--}, at: [<cc89522b>] exp_readlock+0xd/0xf [nfsd]
#1: (&inode->i_mutex){--..}, at: [<c034cc1d>] mutex_lock+0x1c/0x1f
stack backtrace:
[<c0103508>] show_trace_log_lvl+0x58/0x152
[<c0103b8b>] show_trace+0xd/0x10
[<c0103c2f>] dump_stack+0x19/0x1b
[<c012aa63>] __lock_acquire+0x77a/0x9a3
[<c012af56>] lock_acquire+0x60/0x80
[<c034ca9a>] __mutex_lock_slowpath+0xa7/0x20e
[<c034cc1d>] mutex_lock+0x1c/0x1f
[<cc892ad1>] nfsd_setattr+0x2c8/0x499 [nfsd]
[<cc893ede>] nfsd_create_v3+0x31b/0x4ac [nfsd]
[<cc8984a1>] nfsd3_proc_create+0x128/0x138 [nfsd]
[<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
[<c033ec1d>] svc_process+0x3a5/0x5ed
[<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
[<c0101005>] kernel_thread_helper+0x5/0xb
DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
Leftover inexact backtrace:
[<c0103b8b>] show_trace+0xd/0x10
[<c0103c2f>] dump_stack+0x19/0x1b
[<c012aa63>] __lock_acquire+0x77a/0x9a3
[<c012af56>] lock_acquire+0x60/0x80
[<c034ca9a>] __mutex_lock_slowpath+0xa7/0x20e
[<c034cc1d>] mutex_lock+0x1c/0x1f
[<cc892ad1>] nfsd_setattr+0x2c8/0x499 [nfsd]
[<cc893ede>] nfsd_create_v3+0x31b/0x4ac [nfsd]
[<cc8984a1>] nfsd3_proc_create+0x128/0x138 [nfsd]
[<cc88f0d4>] nfsd_dispatch+0xc0/0x178 [nfsd]
[<c033ec1d>] svc_process+0x3a5/0x5ed
[<cc88f5ba>] nfsd+0x1a7/0x305 [nfsd]
[<c0101005>] kernel_thread_helper+0x5/0xb
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Neil Brown <neilb@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add /proc/fs/nfsd/pool_threads which allows the sysadmin (or a userspace
daemon) to read and change the number of nfsd threads in each pool. The
format is a list of space-separated integers, one per pool.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Replace the existing list of all nfsd threads with new code using
svc_create_pooled().
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
add svc_get() for those occasions when we need to temporarily bump up
svc_serv->sv_nrthreads as a pseudo refcount.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
If lockd_up fails - what should we expect? Do we have to later call
lockd_down?
Well the nfs client thinks "no", the nfs server thinks "yes". lockd thinks
"yes".
The only answer that really makes sense is "no" !!
So:
Make lockd_up only increment nlmsvc_users on success.
Make nfsd handle errors from lockd_up properly.
Make sure lockd_up(0) never fails when lockd is running
so that the 'reclaimer' call to lockd_up doesn't need to
be error checked.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We should be checking the return value of lockd_up when adding a new socket to
nfsd. So move the lockd_up before the svc_addsock and check the return value.
The move is because lockd_down is easy, but there is no easy way to remove a
recently added socket.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It isn't needed as it is available in rqstp->rq_server, and dropping it allows
some local vars to be dropped.
[akpm@osdl.org: build fix]
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
e_start acquires svc_export_cache.hash_lock, and e_stop releases it. Add
lock annotations to these two functions so that sparse can check callers
for lock pairing, and so that sparse will not complain about these
functions since they intentionally use locks in this manner.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Userspace should create and bind a socket (but not connectted) and write the
'fd' to portlist. This will cause the nfs server to listen on that socket.
To close a socket, the name of the socket - as read from 'portlist' can be
written to 'portlist' with a preceding '-'.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This file will list all ports that nfsd has open.
Default when TCP enabled will be
ipv4 udp 0.0.0.0 2049
ipv4 tcp 0.0.0.0 2049
Later, the list of ports will be settable.
'portlist' chosen rather than 'ports', to avoid unnecessary confusion with
non-mainline patches which created 'ports' with different semantics.
[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Separate out the code for creating a new service, and for creating initial
sockets.
Some of these new functions will have multiple callers soon.
[akpm@osdl.org: cleanups]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We have an array 'nfsd_version' which lists the available versions of nfsd,
and 'nfsd_versions' (poor choice there :-() which lists the currently active
versions.
Then we have a bitmap - nfsd_versbits which says which versions are wanted.
The bits in this bitset cause content to be copied from nfsd_version to
nfsd_versions when nfsd starts.
This patch removes nfsd_versbits and moves information directly from
nfsd_version to nfsd_versions when requests for version changes arrive.
Note that this doesn't make it possible to change versions while the server is
running. This is because serv->sv_xdrsize is calculated when a service is
created, and used when threads are created, and xdrsize depends on the active
versions.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Currently lockd listens on UDP always, and TCP if CONFIG_NFSD_TCP is set.
However as lockd performs services of the client as well, this is a problem.
If CONFIG_NfSD_TCP is not set, and a tcp mount is used, the server will not be
able to call back to lockd.
So:
- add an option to lockd_up saying which protocol is needed
- Always open sockets for which an explicit port was given, otherwise
only open a socket of the type required
- Change nfsd to do one lockd_up per socket rather than one per thread.
This
- removes the dependancy on CONFIG_NFSD_TCP
- means that lockd may open sockets other than at startup
- means that lockd will *not* listen on UDP if the only
mounts are TCP mount (and nfsd hasn't started).
The latter is the only one that concerns me at all - I don't know if this
might be a problem with some servers.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
nfsd has some cleanup that it wants to do when the last thread exits, and
there will shortly be some more. So collect this all into one place and
define a callback for an rpc service to call when the service is about to be
destroyed.
[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
* Rougly half of callers already do it by not checking return value
* Code in drivers/acpi/osl.c does the following to be sure:
(void)kmem_cache_destroy(cache);
* Those who check it printk something, however, slab_error already printed
the name of failed cache.
* XFS BUGs on failed kmem_cache_destroy which is not the decision
low-level filesystem driver should make. Converted to ignore.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Conversions from kmalloc+memset to kzalloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Replace xprt_create_proto/rpc_create_client call in NFS server callback
functions to use new rpc_create() API.
Test plan:
NFSv4 delegation functionality tests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
This patch converts all remaining crypto_digest users to use the new
crypto_hash interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
