aboutsummaryrefslogtreecommitdiff
path: root/fs/ocfs2
AgeCommit message (Collapse)Author
2009-02-02ocfs2: add quota call to ocfs2_remove_btree_range()Mark Fasheh
We weren't reclaiming the clusters which get free'd from this function, so any user punching holes in a file would still have those bytes accounted against him/her. Add the call to vfs_dq_free_space_nodirty() to fix this. Interestingly enough, the journal credits calculation already took this into account. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Jan Kara <jack@suse.cz>
2009-02-02ocfs2: Wakeup the downconvert thread after a successful cancel convertSunil Mushran
When two nodes holding PR locks on a resource concurrently attempt to upconvert the locks to EX, the master sends a BAST to one of the nodes. This message tells that node to first cancel convert the upconvert request, followed by downconvert to a NL. Only when this lock is downconverted to NL, can the master upconvert the first node's lock to EX. While the fs was doing the cancel convert, it was forgetting to wake up the dc thread after a successful cancel, leading to a deadlock. Reported-and-Tested-by: David Teigland <teigland@redhat.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02ocfs2: Access the xattr bucket only before modifying it.Tao Ma
In ocfs2_xattr_value_truncate, we may call b-tree codes which will extend the journal transaction. It has a potential problem that it may let the already-accessed-but-not-dirtied buffers gone. So we'd better access the bucket after we call ocfs2_xattr_value_truncate. And as for the root buffer for the xattr value, b-tree code will acess and dirty it, so we don't need to worry about it. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02ocfs2: Fix possible deadlock in ocfs2_write_dquot()Jan Kara
It could happen that some limit has been set via quotactl() and in parallel ->mark_dirty() is called from another thread doing e.g. dquot_alloc_space(). In such case ocfs2_write_dquot() must not try to sync the dquot because that needs global quota lock but that ranks above transaction start. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-02-02ocfs2: Push out dropping of dentry lock to ocfs2_wqJan Kara
Dropping of last reference to dentry lock is a complicated operation involving dropping of reference to inode. This can get complicated and quota code in particular needs to obtain some quota locks which leads to potential deadlock. Thus we defer dropping of inode reference to ocfs2_wq. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-26Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop() quota: Improve locking
2009-01-22fs/Kconfig: move ocfs2 outAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-21ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop()Jan Kara
Since ->acquire_dquot and ->release_dquot callbacks aren't called under dqptr_sem anymore, we don't have to start a transaction and obtain locks so early. So we can just remove all this complicated stuff. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mark Fasheh <mfasheh@suse.de>
2009-01-08fix similar typos to successfullColy Li
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by: Coly Li <coyli@suse.de> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08remove lots of double-semicolonsFernando Carrijo
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Theodore Ts'o <tytso@mit.edu> Acked-by: Mark Fasheh <mfasheh@suse.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-05Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (138 commits) ocfs2: Access the right buffer_head in ocfs2_merge_rec_left. ocfs2: use min_t in ocfs2_quota_read() ocfs2: remove unneeded lvb casts ocfs2: Add xattr support checking in init_security ocfs2: alloc xattr bucket in ocfs2_xattr_set_handle ocfs2: calculate and reserve credits for xattr value in mknod ocfs2/xattr: fix credits calculation during index create ocfs2/xattr: Always updating ctime during xattr set. ocfs2/xattr: Remove extend_trans call and add its credits from the beginning ocfs2/dlm: Fix race during lockres mastery ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking list ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migrating ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler() ocfs2/dlm: Fix a race between migrate request and exit domain ocfs2: One more hamming code optimization. ocfs2: Another hamming code optimization. ocfs2: Don't hand-code xor in ocfs2_hamming_encode(). ocfs2: Enable metadata checksums. ocfs2: Validate superblock with checksum and ecc. ocfs2: Checksum and ECC for directory blocks. ...
2009-01-05zero i_uid/i_gid on inode allocationAl Viro
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05ocfs2: Access the right buffer_head in ocfs2_merge_rec_left.Tao Ma
In commit "ocfs2: Use metadata-specific ocfs2_journal_access_*() functions", the wrong buffer_head is accessed. So change it to the right buffer_head. Signed-off-by: Tao Ma <tao.ma@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: use min_t in ocfs2_quota_read()Mark Fasheh
This is preferred to min(). Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: remove unneeded lvb castsMark Fasheh
dlmglue.c has lots of code which casts the return value of ocfs2_dlm_lvb(). This is pointless however, as ocfs2_dlm_lvb() returns void *. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add xattr support checking in init_securityTiger Yang
We must check whether ocfs2 volume support xattr in init_security, if not support xattr and security is enable, would cause failure of mknod. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: alloc xattr bucket in ocfs2_xattr_set_handleTiger Yang
In extreme situation, may need xattr bucket for setting security entry and acl entries during mknod. This only happens when block size is too small. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: calculate and reserve credits for xattr value in mknodTiger Yang
We extend the credits for xattr's large value in set_value_outside before, this can give rise to a credits issue when we set one security entry and two acl entries duing mknod. As we remove extend_trans form set_value_outside, we must calculate and reserve the credits for xattr's large value in mknod. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/xattr: fix credits calculation during index createTao Ma
When creating a xattr index block, the old calculation forget to add credits for the meta change of the alloc file. So add more credits and more comments to explain it. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/xattr: Always updating ctime during xattr set.Tao Ma
In xattr set, we should always update ctime if the operation goes sucessfully. The old one mistakenly put it in ocfs2_xattr_set_entry which is only called when we set xattr in inode or xattr block. The side benefit is that it resolve the bug 1052 since in that scenario, ocfs2_calc_xattr_set_need only calc out the xattr set credits while ocfs2_xattr_set_entry update the inode also which isn't concerned with the process of xattr set. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/xattr: Remove extend_trans call and add its credits from the beginningTao Ma
Actually, when setting a new xattr value, we know it from the very beginning, and it isn't like the extension of bucket in which case we can't figure it out. So remove ocfs2_extend_trans in that function and calculate it before the transaction. It also relieve acl operation from the worry about the side effect of ocfs2_extend_trans. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/dlm: Fix race during lockres masterySunil Mushran
dlm_get_lock_resource() is supposed to return a lock resource with a proper master. If multiple concurrent threads attempt to lookup the lockres for the same lockid while the lock mastery in underway, one or more threads are likely to return a lockres without a proper master. This patch makes the threads wait in dlm_get_lock_resource() while the mastery is underway, ensuring all threads return the lockres with a proper master. This issue is known to be limited to users using the flock() syscall. For all other fs operations, the ocfs2 dlmglue layer serializes the dlm op for each lockid. Users encountering this bug will see flock() return EINVAL and dmesg have the following error: ERROR: Dlm error "DLM_BADARGS" while calling dlmlock on resource <LOCKID>: bad api args Reported-by: Coly Li <coyli@suse.de> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/dlm: Fix race in adding/removing lockres' to/from the tracking listSunil Mushran
This patch adds a new lock, dlm->tracking_lock, to protect adding/removing lockres' to/from the dlm->tracking_list. We were previously using dlm->spinlock for the same, but that proved inadequate as we could be freeing a lockres from a context that did not hold that lock. As the new lock only protects this list, we can explicitly take it when removing the lockres from the tracking list. This bug was exposed when testing multiple processes concurrently flock() the same file. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/dlm: Hold off sending lockres drop ref message while lockres is migratingSunil Mushran
During lockres purge, o2dlm sends a drop reference message to the lockres master. This patch delays the message if the lockres is being migrated. Fixes oss bugzilla#1012 http://oss.oracle.com/bugzilla/show_bug.cgi?id=1012 Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/dlm: Clean up errors in dlm_proxy_ast_handler()Sunil Mushran
Patch cleans printed errors in dlm_proxy_ast_handler(). The errors now includes the node number that sent the (b)ast. Also it reduces the number of endian swaps of the cookie. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2/dlm: Fix a race between migrate request and exit domainSunil Mushran
Patch address a racing migrate request message and an exit domain message. Instead of blocking exit domains for the duration of the migrate, we ignore failure to deliver that message. This is because an exiting domain should not have any active locks and thus has no role to play in the migration. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: One more hamming code optimization.Joel Becker
The previous optimization used a fast find-highest-bit-set operation to give us a good starting point in calc_code_bit(). This version lets the caller cache the previous code buffer bit offset. Thus, the next call always starts where the last one left off. This reduces the calculation another 39%, for a total 80% reduction from the original, naive implementation. At least, on my machine. This also brings the parity calculation to within an order of magnitude of the crc32 calculation. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Another hamming code optimization.Joel Becker
In the calc_code_bit() function, we must find all powers of two beneath the code bit number, *after* it's shifted by those powers of two. This requires a loop to see where it ends up. We can optimize it by starting at its most significant bit. This shaves 32% off the time, for a total of 67.6% shaved off of the original, naive implementation. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Don't hand-code xor in ocfs2_hamming_encode().Joel Becker
When I wrote ocfs2_hamming_encode(), I was following documentation of the algorithm and didn't have quite the (possibly still imperfect) grasp of it I do now. As part of this, I literally hand-coded xor. I would test a bit, and then add that bit via xor to the parity word. I can, of course, just do a single xor of the parity word and the source word (the code buffer bit offset). This cuts CPU usage by 53% on a mostly populated buffer (an inode containing utmp.h inline). Joel Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Enable metadata checksums.Joel Becker
Add OCFS2_FEATURE_INCOMPAT_META_ECC to the list of supported features. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Validate superblock with checksum and ecc.Joel Becker
The superblock is read via a raw call. Validate it after we find it from its signature. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Checksum and ECC for directory blocks.Joel Becker
Use the db_check field of ocfs2_dir_block_trailer to crc/ecc the dirblocks. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add directory block trailers.Mark Fasheh
Future ocfs2 features metaecc and indexed directories need to store a little bit of data in each dirblock. For compatibility, we place this in a trailer at the end of the dirblock. The trailer plays itself as an empty dirent, so that if the features are turned off, it can be reused without requiring a tunefs scan. This code adds the trailer and validates it when the block is read in. [ Mark is the original author, but I reinserted this code before his dir index work. -- Joel ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use proper journal_access function in xattr.cJoel Becker
Change the rest of the naked ocfs2_journal_access() calls in fs/ocfs2/xattr.c to use the appropriate ocfs2_journal_access_*() call for their metadata type. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Pass value buf to ocfs2_remove_value_outside().Joel Becker
ocfs2_remove_value_outside() needs to know the type of buffer it is looking at. Pass in an ocfs2_xattr_value_buf. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use ocfs2_xattr_value_buf in ocfs2_xattr_set_entry().Joel Becker
ocfs2_xattr_set_entry is the function that knows what type of block it is setting into. This is what we wanted from ocfs2_xattr_value_buf. Plus, moving the value buf up into ocfs2_xattr_set_entry() allows us to pass it into ocfs2_xattr_set_value_outside() and ocfs2_xattr_cleanup(). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Pass value buf to ocfs2_xattr_update_entry().Joel Becker
ocfs2_xattr_update_entry() updates the entry portion of an xattr buffer. This can be part of multiple metadata block types, so pass the buffer in via an ocfs2_xattr_value_buf. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Pass ocfs2_xattr_value_buf into ocfs2_xattr_value_truncate().Joel Becker
The callers of ocfs2_xattr_value_truncate() now pass in ocfs2_xattr_value_bufs. These callers are the ones that calculated the xv location, so they are the right starting point. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Pull ocfs2_xattr_value_buf up into ocfs2_xattr_value_truncate().Joel Becker
Place an ocfs2_xattr_value_buf in ocfs2_xattr_value_truncate() and pass it down to ocfs2_xattr_shrink_size(). We can also pass it into ocfs2_xattr_extend_allocation(), replacing its ocfs2_xattr_value_buf. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Pull ocfs2_xattr_value_buf up from __ocfs2_remove_xattr_range().Joel Becker
Place an ocfs2_xattr_value_buf in __ocfs2_xattr_shrink_size() and pass it down to __ocfs2_remove_xattr_range(). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Create ocfs2_xattr_value_buf.Joel Becker
When an ocfs2 extended attribute is large enough to require its own allocation tree, we root it with an ocfs2_xattr_value_root. However, these roots can be a part of inodes, xattr blocks, or xattr buckets. Thus, they need a different journal access function for each container. We wrap the bh, its journal access function, and the value root (xv) in a structure called ocfs2_xattr_valu_buf. This is a package that can be passed around. In this first pass, we simply pass it to the extent tree code. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add ecc and checksums to ocfs2 xattr buckets.Joel Becker
The xattr bucket can span multiple blocks on disk. We have wrappers for this structure in the code. We use the new multi-block ecc calls to calculate and validate the bucket. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.Joel Becker
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Wrap up the common use cases of ocfs2_new_path().Joel Becker
The majority of ocfs2_new_path() calls are: ocfs2_new_path(path_root_bh(otherpath), path_root_el(otherpath)); Let's call that ocfs2_new_path_from_path(). The rest do similar things from struct ocfs2_extent_tree. Let's call those ocfs2_new_path_from_et(). This will make the next change easier. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add journal_access functions with jbd2 triggers.Joel Becker
We create wrappers for ocfs2_journal_access() that are specific to the type of metadata block. This allows us to associate jbd2 commit triggers with the block. The triggers will compute metadata ecc in a future commit. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: block read meta ecc.Joel Becker
Add block check calls to the read_block validate functions. This is the almost all of the read-side checking of metaecc. xattr buckets are not checked yet. Writes are also unchecked, and so a read-write mount will quickly fail. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add a validation hook for quota block reads.Joel Becker
Add a currently-returns-success hook for quota block reads. We'll be adding checks to this. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add the underlying blockcheck code.Joel Becker
This is the code that computes crc32 and ecc for ocfs2 metadata blocks. There are high-level functions that check whether the filesystem has the ecc feature, mid-level functions that work on a single block or array of buffer_heads, and the low-level ecc hamming code that can handle multiple buffers like crc32_le(). It's not hooked up to the filesystem yet. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add the on-disk structures for metadata checksums.Joel Becker
Define struct ocfs2_block_check, an 8-byte structure containing a 32bit crc32_le and a 16bit hamming code ecc. This will be used for metadata checksums. Add the structure to free spaces in the various metadata structures. Add the OCFS2_FEATURE_INCOMPAT_META_ECC bit. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>