aboutsummaryrefslogtreecommitdiff
path: root/fs/xfs/quota
AgeCommit message (Collapse)Author
2009-06-10xfs: use generic Posix ACL codeChristoph Hellwig
This patch rips out the XFS ACL handling code and uses the generic fs/posix_acl.c code instead. The ondisk format is of course left unchanged. This also introduces the same ACL caching all other Linux filesystems do by adding pointers to the acl and default acl in struct xfs_inode. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08xfs: remove SYNC_BDFLUSHChristoph Hellwig
SYNC_BDFLUSH is a leftover from IRIX and rather misnamed for todays code. Make xfs_sync_fsdata and xfs_dq_sync use the SYNC_TRYLOCK flag for not blocking on logs just as the inode sync code already does. For xfs_sync_fsdata it's a trivial 1:1 replacement, but for xfs_qm_sync I use the opportunity to decouple the non-blocking lock case from the different flushing modes, similar to the inode sync code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08xfs: use generic inode iterator in xfs_qm_dqrele_all_inodesChristoph Hellwig
Use xfs_inode_ag_iterator instead of opencoding the inode walk in the quota code. Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static to allow using them from the quota code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08xfs: kill xfs_qmopsChristoph Hellwig
Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-03-29xfs: kill mutex_t typedefChristoph Hellwig
People continue to complain about this for weird reasons, but there's really no point in keeping this typedef for a couple of users anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-09xfs: get rid of indirections in the quotaops implementationChristoph Hellwig
Currently we call from the nicely abstracted linux quotaops into a ugly multiplexer just to split the calls out at the same boundary again. Rewrite the quota ops handling to remove that obfucation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09xfs: sanitize qh_lock wrappersChristoph Hellwig
Get rid of various obsfucating wrappers for accessing the quota hash lock, we only keep the accessors for accessing the mplist and freelist locks as they encode a multi-level datastructure walk. But make sure all of them are defined in the same way as simple macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09xfs: use mutex_is_locked in XFS_DQ_IS_LOCKEDChristoph Hellwig
Now that we have a helper to test if a mutex is held use it instead of our own little hacks. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-09xfs: remove XFS_QM_LOCK/XFS_QM_UNLOCK/XFS_QM_HOLD/XFS_QM_RELEChristoph Hellwig
Remove these macros which only obsfucated the code in rather nast ways. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-02-08xfs: remove the unused XFS_QMOPT_DQLOCK flagChristoph Hellwig
The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem but isn't actually used anywhere. So remove it and all the hazzles it introduces. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-01-19xfs: add a lock class for group/project dquotsChristoph Hellwig
We can have both a user and a group/project dquot locked at the same time, as long as the user dquot is locked first. Tell lockdep about that fact by making the group/project dquots a different lock class. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-01-19xfs: lockdep annotations for xfs_dqlock2Christoph Hellwig
xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the dquot with the lower id first. Use mutex_lock_nested to tell lockdep about this fact. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-01-19xfs: add a separate lock class for the per-mount list of dquotsChristoph Hellwig
We can have both a a quota hash chain and the per-mount list locked at the same time. But given that both use the same struct dqhash as list head we have to tell lockdep that they are different lock classes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-01-16[XFS] Remove the rest of the macro-to-function indirections.Eric Sandeen
Remove the last of the macros-defined-to-static-functions. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-12-04no explicit xfs_iflush for special inodes during unmountChristoph Hellwig
Currently we explicitly call xfs_iflush on the quota, real-time and root inodes from xfs_unmount_flush. But we just called xfs_sync_inodes with SYNC_ATTR and do an XFS_bflush aka xfs_flush_buftarg to make sure all inodes are on disk already, so there is no need for these special cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01[XFS] remove bhv_statvfs_t typedefChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-11-10[XFS] Avoid using inodes that haven't been completely initialisedDave Chinner
The radix tree walks in xfs_sync_inodes_ag and xfs_qm_dqrele_all_inodes() can find inodes that are still undergoing initialisation. Avoid them by checking for the the XFS_INEW() flag once we have a reference on the inode. This flag is cleared once the inode is properly initialised. SGI-PV: 987246 Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-10[XFS] fix uninitialised variable bug in dquot releaseDave Chinner
gcc on ARM warns about an using an uninitialised variable in xfs_qm_dqrele_all_inodes(). This is a real bug, but gcc on x86_64 is not reporting this warning so it went unnoticed. Fix the bug by bring the inode radix tree walk code up to date with xfs_sync_inodes_ag(). SGI-PV: 987246 Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] kill struct xfs_mount_argsChristoph Hellwig
No need to parse the mount option into a structure before applying it to struct xfs_mount. The content of xfs_start_flags gets merged into xfs_parseargs. Calls inbetween don't care and can use mount members instead of the args struct. This patch uncovered that the mount option for shared filesystems wasn't ever exposed on Linux. The code to handle it is #if 0'ed in this patch pending a decision on this feature. I'll send a writeup about it to the list soon. SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32371a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] Finish removing the mount pointer from the AIL APIDavid Chinner
Change all the remaining AIL API functions that are passed struct xfs_mount pointers to pass pointers directly to the struct xfs_ail being used. With this conversion, all external access to the AIL is via the struct xfs_ail. Hence the operation and referencing of the AIL is almost entirely independent of the xfs_mount that is using it - it is now much more tightly tied to the log and the items it is tracking in the log than it is tied to the xfs_mount. SGI-PV: 988143 SGI-Modid: xfs-linux-melb:xfs-kern:32353a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30[XFS] Move the AIL lock into the struct xfs_ailDavid Chinner
Bring the ail lock inside the struct xfs_ail. This means the AIL can be entirely manipulated via the struct xfs_ail rather than needing both the struct xfs_mount and the struct xfs_ail. SGI-PV: 988143 SGI-Modid: xfs-linux-melb:xfs-kern:32350a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30[XFS] Allow 64 bit machines to avoid the AIL lock during flushesDavid Chinner
When copying lsn's from the log item to the inode or dquot flush lsn, we currently grab the AIL lock. We do this because the LSN is a 64 bit quantity and it needs to be read atomically. The lock is used to guarantee atomicity for 32 bit platforms. Make the LSN copying a small function, and make the function used conditional on BITS_PER_LONG so that 64 bit machines don't need to take the AIL lock in these places. SGI-PV: 988143 SGI-Modid: xfs-linux-melb:xfs-kern:32349a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30[XFS] Kill xfs_sync()David Chinner
There are no more callers to xfs_sync() now, so remove the function altogther. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32311a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30[XFS] use xfs_sync_inodes rather than xfs_syncsubDavid Chinner
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with direct calls to xfs_sync_inodes() as that is all that is being done with the specific flags being passed in. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32305a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30[XFS] Use struct inodes instead of vnodes to kill vn_grabDavid Chinner
With the sync code relocated to the linux-2.6 directory we can use struct inodes directly. If we do the same thing for the quota release code, we can remove vn_grab altogether. While here, convert the VN_BAD() checks to is_bad_inode() so we can remove vnodes entirely from this code. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32304a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30[XFS] Traverse inode trees when releasing dquotsDavid Chinner
Make releasing all inode dquots traverse the per-ag inode radix trees rather than the mount inode list. This removes another user of the mount inode list. Version 3 o fix comment relating to avoiding trying to release the quota inodes and those in reclaim. Version 2 o add comment explaining use of gang lookups for a single inode o use IRELE, not VN_RELE o move check for ag initialisation to caller. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32291a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30[XFS] don't block in xfs_qm_dqflush() during async writeback.David Chinner
Normally dquots are written back via delayed write mechanisms. They are flushed to their backing buffer by xfssyncd, which is then pushed out by either AIL or xfsbufd flushing. The flush from the xfssyncd is supposed to be non-blocking, but xfs_qm_dqflush() always waits for pinned duots, which means that it will block for the length of time it takes to do a synchronous log force. This causes unnecessary extra log I/O to be issued whenever we try to flush a busy dquot. Avoid the log forces and blocking xfssyncd by making xfs_qm_dqflush() pay attention to what type of sync it is doing when it sees a pinned dquot and not waiting when doing non-blocking flushes. SGI-PV: 988147 SGI-Modid: xfs-linux-melb:xfs-kern:32287a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Peter Leckie <pleckie@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] Fix build brakage from patch "Clean up dquot pincount code"Peter Leckie
This is a fix for patch " Clean up dquot pincount code" which introduced a build breakage due to a missing & in xfs_qm_dquot_logitem_pin. SGI-PV: 986789 SGI-Modid: xfs-linux-melb:xfs-kern:32221a Signed-off-by: Peter Leckie <pleckie@sgi.com> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] Clean up dquot pincount code.Peter Leckie
This is a code cleanup and optimization that removes a per mount point spinlock from the quota code and cleans up the code. The patch changes the pincount from being an int protected by a spinlock to an atomic_t allowing the pincount to be manipulated without holding the spinlock. This cleanup also protects against random wakup's of both the aild and xfssyncd by reevaluating the pincount after been woken. Two latter patches will address the Spurious wakeups. SGI-PV: 986789 SGI-Modid: xfs-linux-melb:xfs-kern:32215a Signed-off-by: Peter Leckie <pleckie@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Use KM_NOFS for debug trace buffersLachlan McIlroy
Use KM_NOFS to prevent recursion back into the filesystem which can cause deadlocks. In the case of xfs_iread() we hold the lock on the inode cluster buffer while allocating memory for the trace buffers. If we recurse back into XFS to flush data that may require a transaction to allocate extents which needs log space. This can deadlock with the xfsaild thread which can't push the tail of the log because it is trying to get the inode cluster buffer lock. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31838a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-08-13[XFS] cleanup xfs_mountfsChristoph Hellwig
Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] replace dquot flush semaphore with a completionDavid Chinner
Use the new completion flush code to implement the dquot flush lock. Removes one of the final users of semaphores in the XFS code base. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31822a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] kill bhv_vnode_tChristoph Hellwig
All remaining bhv_vnode_t instance are in code that's more or less Linux specific. (Well, for xfs_acl.c that could be argued, but that code is on the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the whole tree. We can clean up variable naming and some useless helpers later. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31781a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] remove remaining VN_HOLD callsChristoph Hellwig
Use IHOLD(ip) instead of VN_HOLD(VFS_I(ip)). SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31765a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Kill shouty XFS_ITOV() macroDavid Chinner
Replace XFS_ITOV() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31724a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] kill shouty XFS_ITOV_NULL macroDavid Chinner
Replace XFS_ITOV_NULL() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31722a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/Christoph Hellwig
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31405a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Remove unused Falgs parameter from xfs_qm_dqpurge()Denys Vlasenko
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31056a Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Remove unused arg from kmem_free()Denys Vlasenko
kmem_free() function takes (ptr, size) arguments but doesn't actually use second one. This patch removes size argument from all callsites. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31050a Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29[XFS] shrink mrlock_tChristoph Hellwig
The writer field is not needed for non_DEBU builds so remove it. While we're at i also clean up the interface for is locked asserts to go through and xfs_iget.c helper with an interface like the xfs_ilock routines to isolated the XFS codebase from mrlock internals. That way we can kill mrlock_t entirely once rw_semaphores grow an islocked facility. Also remove unused flags to the ilock family of functions. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30902a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29[XFS] kill di_mode checks after xfs_igetChristoph Hellwig
Unless XFS_IGET_CREATE is passed xfs_iget will return ENOENT if it encounters an inode with di_mode == 0. Remove the duplicated checks in the callers. (the log recovery case is not touched for now) SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30898a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Ensure xfs_bawrite() errors are checked.David Chinner
xfs_bawrite() can return immediate error status on async writes. Unlike xfsbdstrat() we don't ever check the error on the buffer after the call, so we currently do not catch errors at all here. Ensure we catch and propagate or warn to the syslog about up-front async write errors. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30824a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Propagate errors from xfs_trans_commit().David Chinner
xfs_trans_commit() can return errors when there are problems in the transaction subsystem. They are indicative that the entire transaction may be incomplete, and hence the error should be propagated as there is a good possibility that there is something fatally wrong in the filesystem. Catch and propagate or warn about commit errors in the places where they are currently ignored. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30795a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Propagate quota file truncation errors.David Chinner
Truncating the quota files can silently fail. Ensure that truncation errors are propagated to the callers. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30791a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Catch errors when turning off quotas.David Chinner
When turning off quota, we need to write various transactions to the log to ensure that they are cleanly removed in the case of a crash. We need to check that the transactions hit the disk correctly. If we fail to write the final quota off transaction, we are corrupt in memory and so the only option is to shut the filesystem down at this point. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30790a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Catch errors resetting quota flags.David Chinner
Warn to the syslog if we fail to reset the quota flags in the superblock when a quota check fails. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30789a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Clean up quotamount error handling.David Chinner
xfs_qm_mount_quotas() returns an error status that is ignored. If we fail to mount quotas, we continue with quota's turned off, which is all handled inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need not be returned to the callers. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30788a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Check for dquot flush errorsDavid Chinner
xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence we never know if we've failed to flush a dquot to disk. Propagate the error and warn to the syslog if a flush ever fails. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30787a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] Propagate xfs_qm_dqflush_all() errors.David Chinner
xfs_qm_dqflush_all() can return flush errors. Ensure they are propagated into the quotacheck code to determine if the quotacheck succeeded or not. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30786a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-18[XFS] xfs_qm_reset_dqcounts() does not return errors.David Chinner
Declare it void. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30785a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 16:49:48 +0000