aboutsummaryrefslogtreecommitdiff
path: root/fs/xfs/xfs_bmap_btree.h
AgeCommit message (Collapse)Author
2008-10-30[XFS] Move XFS_BMAP_SANITY_CHECK out of line.Christoph Hellwig
Move the XFS_BMAP_SANITY_CHECK macro out of line and make it a properly typed function. Also pass the xfs_buf for the btree block instead of just the btree block header, as we will need some additional information for it to implement CRC checking of btree blocks. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32301a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] Always use struct xfs_btree_block instead of short / longformChristoph Hellwig
structures. Always use the generic xfs_btree_block type instead of the short / long structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for the length of a short / long form block. The rationale for this is that we will grow more btree block header variants to support CRCs and other RAS information, and always accessing them through the same datatype with unions for the short / long form pointers makes implementing this much easier. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32300a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] cleanup btree record / key / ptr addressing macros.Christoph Hellwig
Replace the generic record / key / ptr addressing macros that use cpp token pasting with simpler macros that do the job for just one given btree type. The new macros lose the cur argument and thus can be used outside the core btree code, but also gain an xfs_mount * argument to allow for checking the CRC flag in the near future. Note that many of these macros aren't actually used in the kernel code, but only in userspace (mostly in xfs_repair). SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32295a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] Cleanup maxrecs calculation.Christoph Hellwig
Clean up the way the maximum and minimum records for the btree blocks are calculated. For the alloc and inobt btrees all the values are pre-calculated in xfs_mount_common, and we switch the current loop around the ugly generic macros that use cpp token pasting to generate type names to two small helpers in normal C code. For the bmbt and bmdr trees these helpers also exist, but can be called during runtime, too. Here we also kill various macros dealing with them and inline the logic into the get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c. Note that all these new helpers take an xfs_mount * argument which will be needed to determine the size of a btree block once we add support for extended btree blocks with CRCs and other RAS information. SGI-PV: 988146 SGI-Modid: xfs-linux-melb:xfs-kern:32292a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] Sync up kernel and user-space headersBarry Naujok
SGI-PV: 986558 SGI-Modid: xfs-linux-melb:xfs-kern:32231a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30[XFS] kill xfs_bmbt_log_block and xfs_bmbt_log_recsChristoph Hellwig
These are equivalent to the xfs_btree_* versions, and the only remaining caller can be switched to the generic one after they are exported. Also remove some now dead infrastructure in xfs_bmap_btree.c. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32207a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] implement generic xfs_btree_delete/delrecChristoph Hellwig
Make the btree delete code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32205a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] implement generic xfs_btree_insert/insrecChristoph Hellwig
Make the btree insert code generic. Based on a patch from David Chinner with lots of changes to follow the original btree implementations more closely. While this loses some of the generic helper routines for inserting/moving/removing records it also solves some of the one off bugs in the original code and makes it easier to verify. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32202a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] move xfs_bmbt_newroot to common codeChristoph Hellwig
xfs_bmbt_newroot is a mostly generic implementation of moving from an inode root to a real block based root. So move it to xfs_btree.c where it can use all the nice infrastructure there and make it pointer size agnostic The new name for it is xfs_btree_new_iroot, following the old naming but making it clear we're dealing with the root in inode case here, and to avoid confusion with xfs_btree_new_root which is used for the not inode rooted case. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32201a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] implement generic xfs_btree_updateChristoph Hellwig
From: Dave Chinner <dgc@sgi.com> The most complicated part here is the lastrec tracking for the alloc btree. Most logic is in the update_lastrec method which has to do some hopefully good enough dirty magic to maintain it. [hch: split out from bigger patch and a rework of the lastrec logic] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32194a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] implement generic xfs_btree_lookupChristoph Hellwig
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32192a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] implement generic xfs_btree_decrementChristoph Hellwig
From: Dave Chinner <dgc@sgi.com> [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32191a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] implement generic xfs_btree_incrementChristoph Hellwig
From: Dave Chinner <dgc@sgi.com> Because this is the first major generic btree routine this patch includes some infrastrucure, first a few routines to deal with a btree block that can be either in short or long form, second xfs_btree_read_buf_block, which is the new central routine to read a btree block given a cursor, and third the new xfs_btree_ptr_addr routine to calculate the address for a given btree pointer record. [hch: split out from bigger patch and minor adaptions] SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32190a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] make btree tracing genericChristoph Hellwig
Make the existing bmap btree tracing generic so that it applies to all btree types. Some fragments lifted from a patch by Dave Chinner. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32187a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30[XFS] split up xfs_btree_init_cursorChristoph Hellwig
xfs_btree_init_cursor contains close to little shared code for the different btrees and will get even more non-common code in the future. Split it up into one routine per btree type. Because xfs_btree_dup_cursor needs to call the init routine for a generic btree cursor add a new btree operation vector that contains a dup_cursor method that initializes a new cursor based on an existing one. The btree operations vector is based on an idea and code from Dave Chinner and will grow more entries later during this series. SGI-PV: 985583 SGI-Modid: xfs-linux-melb:xfs-kern:32176a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Bill O'Donnell <billodo@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-04-10[XFS] remove shouting-indirection macros from xfs_sb.hEric Sandeen
Remove macro-to-small-function indirection from xfs_sb.h, and remove some which are completely unused. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30528a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2007-10-15[XFS] endianess annotations for xfs_bmbt_rec_tChristoph Hellwig
SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29321a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15[XFS] cleanup defintions of BMBT_*BITLEN macrosChristoph Hellwig
The BMBT_*BITLEN are currently defined in a complicated way depending on XFS_NATIVE_HOST. But if all the macros are expanded they (obviously) expand to the same value for both cases. This patch defines the macros in the most simple way and updates the comment describing them to remove outdated bits. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29320a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15[XFS] split ondisk vs incore versions of xfs_bmbt_rec_tChristoph Hellwig
currently xfs_bmbt_rec_t is used both for ondisk extents as well as host-endian ones. This patch adds a new xfs_bmbt_rec_host_t for the native endian ones and cleans up the fallout. There have been various endianess issues in the tracing / debug printf code that are fixed by this patch. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29318a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Remove a bunch of unused functions from XFS.Eric Sandeen
Patch provided by Eric Sandeen (sandeen@sandeen.net). SGI-PV: 960897 SGI-Modid: xfs-linux-melb:xfs-kern:28038a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-02-10[XFS] Remove unused arguments from the XFS_BTREE_*_ADDR macros.Eric Sandeen
It makes it incrementally clearer to read the code when the top of a macro spaghetti-pile only receives the 3 arguments it uses, rather than 2 extra ones which are not used. Also when you start pulling this thread out of the sweater (i.e. remove unused args from XFS_BTREE_*_ADDR), a couple other third arms etc fall off too. If they're not used in the macro, then they sometimes don't need to be passed to the function calling the macro either, etc.... Patch provided by Eric Sandeen (sandeen@sandeen.net). SGI-PV: 960197 SGI-Modid: xfs-linux-melb:xfs-kern:28037a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28[XFS] endianess annotations for xfs_bmbt_key Trivial as there are noChristoph Hellwig
incore users. SGI-PV: 954580 SGI-Modid: xfs-linux-melb:xfs-kern:26561a Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nathan Scott <nathans@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28[XFS] endianess annotations for xfs_bmbt_ptr_t/xfs_bmdr_ptr_tChristoph Hellwig
SGI-PV: 954580 SGI-Modid: xfs-linux-melb:xfs-kern:26559a Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nathan Scott <nathans@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-03-14[XFS] 929045 567344 This mod introduces multi-level in-core file extentMandy Kirkconnell
functionality, building upon the new layout introduced in mod xfs-linux:xfs-kern:207390a. The new multi-level extent allocations are only required for heavily fragmented files, so the old-style linear extent list is used on files until the extents reach a pre-determined size of 4k. 4k buffers are used because this is the system page size on Linux i386 and systems with larger page sizes don't seem to gain much, if anything, by using their native page size as the extent buffer size. Also, using 4k extent buffers everywhere provides a consistent interface for CXFS across different platforms. The 4k extent buffers are managed by an indirection array (xfs_ext_irec_t) which is basically just a pointer array with a bit of extra information to keep track of the number of extents in each buffer as well as the extent offset of each buffer. Major changes include: - Add multi-level in-core file extent functionality to the xfs_iext_ subroutines introduced in mod: xfs-linux:xfs-kern:207390a - Introduce 13 new subroutines which add functionality for multi-level in-core file extents: xfs_iext_add_indirect_multi() xfs_iext_remove_indirect() xfs_iext_realloc_indirect() xfs_iext_indirect_to_direct() xfs_iext_bno_to_irec() xfs_iext_idx_to_irec() xfs_iext_irec_init() xfs_iext_irec_new() xfs_iext_irec_remove() xfs_iext_irec_compact() xfs_iext_irec_compact_pages() xfs_iext_irec_compact_full() xfs_iext_irec_update_extoffs() SGI-PV: 928864 SGI-Modid: xfs-linux-melb:xfs-kern:207393a Signed-off-by: Mandy Kirkconnell <alkirkco@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02[XFS] Endianess annotations for various allocator data structuresChristoph Hellwig
SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:201006a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02[XFS] Update license/copyright notices to match the prefered SGINathan Scott
boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02[XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot.Nathan Scott
SGI-PV: 943122 SGI-Modid: xfs-linux:xfs-kern:23901a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-09-08[XFS] Cleanup some -Wundef flag warnings in the endian macros (thanksNathan Scott
Christoph). SGI-PV: 942400 SGI-Modid: xfs-linux-melb:xfs-kern:23771a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21[XFS] Remove dead code. Patch from Adrian BunkChristoph Hellwig
SGI-PV: 936255 SGI-Modid: xfs-linux:xfs-kern:192759a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!