aboutsummaryrefslogtreecommitdiff
path: root/fs/xfs
AgeCommit message (Collapse)Author
2008-08-13[XFS] don't leak m_fsname/m_rtname/m_lognameChristoph Hellwig
Add a helper to free the m_fsname/m_rtname/m_logname allocations and use it properly for all mount failure cases. Also switch the allocations for these to kstrdup while we're at it. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31728a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Move attr log alloc size calculator to another function.Niv Sardi
We will need that to be able to calculate the size of log we need for a specific attr (for Create+EA). The local flag is needed so that we can fail if we run into ENOSPC when trying to alloc blocks. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31727a Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Use KM_NOFS for incore inode extent tree allocation V2David Chinner
If we allow incore extent tree allocations to recurse into the filesystem under memory pressure, new delayed allocations through xfs_iomap_write_delay() can deadlock on themselves if memory reclaim tries to write back dirty pages from that inode. It will deadlock in xfs_iomap_write_allocate() trying to take the ilock we already hold. This can also show up as complex ABBA deadlocks when multiple threads are triggering memory reclaim when trying to allocate extents. The main cause of this is the fact that delayed allocation is not done in a transaction, so KM_NOFS is not automatically added to the allocations to prevent this recursion. Mark all allocations done for the incore inode extent tree as KM_NOFS to ensure they never recurse back into the filesystem. Version 2: o KM_NOFS implies KM_SLEEP, so just use KM_NOFS SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31726a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] XFS: Kill xfs_vtoi()David Chinner
xfs_vtoi() is redundant and only unsed in small sections of code. Replace them with widely used XFS_I() inline and kill xfs_vtoi(). SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31725a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Kill shouty XFS_ITOV() macroDavid Chinner
Replace XFS_ITOV() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31724a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] kill shouty XFS_ITOV_NULL macroDavid Chinner
Replace XFS_ITOV_NULL() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31722a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Avoid directly referencing the VFS inode.David Chinner
In several places we directly convert from the XFS inode to the linux (VFS) inode by a simple deference of ip->i_vnode. We should not do this - a helper function should be used to extract the VFS inode from the XFS inode. Introduce the function VFS_I() to extract the VFS inode from the XFS inode. The name was chosen to match XFS_I() which is used to extract the XFS inode from the VFS inode. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31720a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13[XFS] Do not access buffers after dropping reference countLachlan McIlroy
We should not access a buffer after dropping it's reference count otherwise we could race with another thread that releases the final reference count and frees the buffer causing us to access potentially unmapped memory. The bug this change fixes only occured on DEBUG XFS since the offending code was in an ASSERT. SGI-PV: 984429 SGI-Modid: xfs-linux-melb:xfs-kern:31715a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <david@fromorbit.com>
2008-08-13[XFS] Use the generic bitops rather than implementing them ourselves.David Chinner
This keeps xfs_lowbit64 as it was since there aren't good generic helpers there ... Patch inspired by Andi Kleen. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31472a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-04fs: rename buffer trylockNick Piggin
Like the page lock change, this also requires name change, so convert the raw test_and_set bitop to a trylock. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04mm: rename page trylockNick Piggin
Converting page lock to new locking bitops requires a change of page flag operation naming, so we might as well convert it to something nicer (!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked). This also facilitates lockdeping of page lock. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28[XFS] Remove vn_revalidate calls in xfs.Christoph Hellwig
These days most of the attributes in struct inode are properly kept in sync by XFS. This patch removes the need for vn_revalidate completely by: - keeping inode.i_flags uptodate after any flags are updated in xfs_ioctl_setattr - keeping i_mode, i_uid and i_gid uptodate in xfs_setattr SGI-PV: 984566 SGI-Modid: xfs-linux-melb:xfs-kern:31679a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Now that xfs_setattr is only used for attributes set from ->setattrChristoph Hellwig
it can be switched to take struct iattr directly and thus simplify the implementation greatly. Also rename the ATTR_ flags to XFS_ATTR_ to not conflict with the ATTR_ flags used by the VFS. SGI-PV: 984565 SGI-Modid: xfs-linux-melb:xfs-kern:31678a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] xfs_setattr currently doesn't just handle the attributes set throughChristoph Hellwig
->setattr but also addition XFS-specific attributes: project id, inode flags and extent size hint. Having these in a single function makes it more complicated and forces to have us a bhv_vattr intermediate structure eating up stackspace. This patch adds a new xfs_ioctl_setattr helper for the XFS ioctls that set these attributes and remove the code to set them through xfs_setattr. SGI-PV: 984564 SGI-Modid: xfs-linux-melb:xfs-kern:31677a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] fix use after free with external logs or real-time devicesLachlan McIlroy
SGI-PV: 983806 SGI-Modid: xfs-linux-melb:xfs-kern:31666a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In aTim Shimmin
particular case, the delta param which is supposed to describe the region where extents have changed was not updated appropriately. SGI-PV: 984030 SGI-Modid: xfs-linux-melb:xfs-kern:31663a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Olaf Weber <olaf@sgi.com>
2008-07-28[XFS] fix compilation without CONFIG_PROC_FSChristoph Hellwig
SGI-PV: 984019 SGI-Modid: xfs-linux-melb:xfs-kern:31408a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/Christoph Hellwig
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31405a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] fix mount option parsing in remountChristoph Hellwig
Remount currently happily accept any option thrown at it, although the only filesystem specific option it actually handles is barrier/nobarrier. And it actually doesn't handle these correctly either because it only uses the value it parsed when we're doing a ro->rw transition. In addition to that there's also a bad bug in xfs_parseargs which doesn't touch the actual option in the mount point except for a single one, XFS_MOUNT_SMALL_INUMS and thus forced any filesystem that's every remounted in some way to not support 64bit inodes with no way to recover unless unmounted. This patch changes xfs_fs_remount to use it's own linux/parser.h based options parse instead of xfs_parseargs and reject all options except for barrier/nobarrier and to the right thing in general. Eventually I'd like to have a single big option table used for mount aswell but that can wait for a while. SGI-PV: 983964 SGI-Modid: xfs-linux-melb:xfs-kern:31382a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Disable queue flag test in barrier check.Eric Sandeen
md raid1 can pass down barriers, but does not set an ordered flag on the queue, so xfs does not even attempt a barrier write, and will never use barriers on these block devices. Remove the flag check and just let the barrier write test determine barrier support. A possible risk here is that if something does not set an ordered flag and also does not properly return an error on a barrier write... but if it's any consolation jbd/ext3/reiserfs never test the flag, and don't even do a test write, they just disable barriers the first time an actual journal barrier write fails. SGI-PV: 983924 SGI-Modid: xfs-linux-melb:xfs-kern:31377a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] streamline init/exit pathChristoph Hellwig
Currently the xfs module init/exit code is a mess. It's farmed out over a lot of function with very little error checking. This patch makes sure we propagate all initialization failures properly and clean up after them. Various runtime initializations are replaced with compile-time initializations where possible to make this easier. The exit path is similarly consolidated. There's now split out function to create/destroy the kmem zones and alloc/free the trace buffers. I've also changed the ktrace allocations to KM_MAYFAIL and handled errors resulting from that. And yes, we really should replace the XFS_*_TRACE ifdefs with a single XFS_TRACE.. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:31354a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we stillTim Shimmin
can use the _ACL_TYPE_* definitions in linux-2.6/xfs_xattr.c. The forthcoming generic acl code will also fix this problem. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31369a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Don't assert if trying to mount with blocksize > pagesizeLachlan McIlroy
If we don't do the blocksize/PAGESIZE check before calling xfs_sb_validate_fsb_count() we can assert if we try to mount with a blocksize > pagesize. The assert is valid so leave it and just move the blocksize/pagesize check earlier. SGI-PV: 983734 SGI-Modid: xfs-linux-melb:xfs-kern:31365a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28[XFS] Don't update mtime on rename sourceChristoph Hellwig
As reported by Michael-John Turner XFS updates the mtime on the source inode of a rename call in case it's a directory and changes the parent. This doesn't make any sense, is not mentioned in the standards and not performed by any other Linux filesystems so remove it. SGI-PV: 983684 SGI-Modid: xfs-linux-melb:xfs-kern:31364a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocatorLachlan McIlroy
algorithm If xfs_bmbt_split() cannot find an AG with sufficient free space to satisfy a full extent btree split then fall back to the lowspace allocator algorithm. SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31359a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28[XFS] Restore the lowspace extent allocator algorithmLachlan McIlroy
When free space is running low the extent allocator may choose to allocate an extent from an AG without leaving sufficient space for a btree split when inserting the new extent (see where xfs_bmap_btalloc() sets minleft to 0). In this case the allocator will enable the lowspace algorithm which is supposed to allow further allocations (such as btree splits and newroots) to allocate from sequential AGs. This algorithm has been broken for a long time and this patch restores its behaviour. SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31358a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28[XFS] use minleft when allocating in xfs_bmbt_split()Lachlan McIlroy
The bmap btree split code relies on a previous data extent allocation (from xfs_bmap_btalloc()) to find an AG that has sufficient space to perform a full btree split, when inserting the extent. When converting unwritten extents we don't allocate a data extent so a btree split will be the first allocation. In this case we need to set minleft so the allocator will pick an AG that has space to complete the split(s). SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31357a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28[XFS] attrmulti cleanupChristoph Hellwig
xfs_attrmulti_by_handle currently request the size based on sizeof(attr_multiop_t) but should be using sizeof(xfs_attr_multiop_t) because that is what it is dealing with. Despite beeing wrong this actually harmless in practice because both structures are the same size on all platforms. But this sizeof was the only user of struct attr_multiop so we can just kill it. Also move the ATTR_OP_* defines xfs_attr.h into the struct xfs_attr_multiop defintion in xfs_fs.h because they are only used with that structure, and are part of the user ABI for the XFS_IOC_ATTRMULTI_BY_HANDLE ioctl. SGI-PV: 983508 SGI-Modid: xfs-linux-melb:xfs-kern:31352a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Check for invalid flags in xfs_attrlist_by_handle.Christoph Hellwig
xfs_attrlist_by_handle should only take the ATTR_ flags for the root namespaces. The ATTR_KERN* flags may change at anytime and expect special preconditions that can't be guaranteed for userspace-originating requests. For example passing down ATTR_KERNNOVAL through xfs_attrlist_by_handle will hit an assert in debug builds currently. SGI-PV: 983677 SGI-Modid: xfs-linux-melb:xfs-kern:31351a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Fix CI lookup in leaf-form directoriesBarry Naujok
Instead of comparing buffer pointers, compare buffer block numbers and don't keep buff SGI-PV: 983564 SGI-Modid: xfs-linux-melb:xfs-kern:31346a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Use the generic xattr methods.Lachlan McIlroy
Add missing file fs/xfs/linux-2.6/xfs_xattr.c SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Always reset btree cursor after an insertLachlan McIlroy
After a btree insert operation a cursor can be invalid due to block splits and a maybe a new root block. We reset the cursor in xfs_bmbt_insert() in the cases where we think we need to but it isn't enough as we still see assertions. Just do what we do elsewhere and reset the cursor unconditionally. Also remove the fix to revalidate the original cursor in xfs_bmbt_insert(). SGI-PV: 983336 SGI-Modid: xfs-linux-melb:xfs-kern:31342a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28[XFS] Convert ASSERTs to XFS_WANT_CORRUPTED_GOTOsLachlan McIlroy
ASSERTs are no good to us on a non-debug build so use XFS_WANT_CORRUPTED_GOTOs to report extent btree corruption ASAP. SGI-PV: 983500 SGI-Modid: xfs-linux-melb:xfs-kern:31338a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] Fix returning case-preserved name with CI node form directoriesBarry Naujok
xfs_dir2_node_lookup() calls xfs_da_node_lookup_int() which iterates through leaf blocks containing the matching hash value for the name being looked up. Inside xfs_da_node_lookup_int(), it calls the xfs_dir2_leafn_lookup_for_entry() for each leaf block. xfs_dir2_leafn_lookup_for_entry() iterates through each matching hash/offset pair doing a name comparison to find the matching dirent. For CI mode, the state->extrablk retains the details of the block that has the CI match so xfs_dir2_node_lookup() can return the case-preserved name. The original implementation didn't retain the xfs_da_buf_t properly, so the lookup was returning a bogus name to be stored in the dentry. In the case of unlink, the bad name was passed and in debug mode, ASSERTed when it can't find the entry. SGI-PV: 983284 SGI-Modid: xfs-linux-melb:xfs-kern:31337a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Don't update i_size for directories and special filesChristoph Hellwig
The core kernel uses vfs_getattr to look at the inode size and similar attributes, so there is no need to keep i_size uptodate for directories or special files. This means we can remove xfs_validate_fields because the I/O path already keeps i_size uptodate for regular files. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31336a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Merge xfs_rmdir into xfs_removeChristoph Hellwig
xfs_remove and xfs_rmdir are almost the same with a little more work performed in xfs_rmdir due to the . and .. entries. This patch merges xfs_rmdir into xfs_remove and performs these actions conditionally. Also clean up the error handling which was a nightmare in both versions before. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31335a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Fix up warning for xfs_vn_listxatt's call of list_one_attr() withTim Shimmin
context count of ssize_t versus int. Change context count to be ssize_t. SGI-PV: 983395 SGI-Modid: xfs-linux-melb:xfs-kern:31333a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] fix extent corruption in xfs_iext_irec_compact_full()Lachlan McIlroy
This function is used to compact the indirect extent list by moving extents from one page to the previous to fill them up. After we move some extents to an earlier page we need to shuffle the remaining extents to the start of the page. The actual bug here is the second argument to memmove() needs to index past the extents, that were copied to the previous page, and move the remaining extents. For pages that are already full (ie ext_avail == 0) the compaction code has no net effect so don't do it. SGI-PV: 983337 SGI-Modid: xfs-linux-melb:xfs-kern:31332a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] make inode reclaim wait for log I/O to completeLachlan McIlroy
During a forced shutdown a xfs inode can be destroyed before log I/O involving that inode is complete. We need to wait for the inode to be unpinned before tearing it down. Version 2 cleans up the code a bit by relying on xfs_iflush() to do the unpinning and forced shutdown check. SGI-PV: 981240 SGI-Modid: xfs-linux-melb:xfs-kern:31326a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28[XFS] Switches xfs_vn_listxattr to set it's put_listent callback directlyChristoph Hellwig
and not go through xfs_attr_list. SGI-PV: 983395 SGI-Modid: xfs-linux-melb:xfs-kern:31324a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Factor out code for whether inode has attributes or not.Christoph Hellwig
SGI-PV: 983394 SGI-Modid: xfs-linux-melb:xfs-kern:31323a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Pack some shortform dir2 structures for the ARM old ABIEric Sandeen
architecture. This should fix the longstanding issues with xfs and old ABI arm boxes, which lead to various asserts and xfs shutdowns, and for which an (incorrect) patch has been floating around for years. I've verified this patch by comparing the on-disk structure layouts using pahole from the dwarves package, as well as running through a bit of xfsqa under qemu-arm, modified so that the check/repair phase after each test actually executes check/repair from the x86 host, on the filesystem populated by the arm emulator. Thus far it all looks good. There are 2 other structures with extra padding at the end, but they don't seem to cause trouble. I suppose they could be packed as well: xfs_dir2_data_unused_t and xfs_dir2_sf_t. Note that userspace needs a similar treatment, and any filesystems which were running with the previous rogue "fix" will now see corruption (either in the kernel, or during xfs_repair) with this fix properly in place; it may be worth teaching xfs_repair to identify and fix that specific issue. SGI-PV: 982930 SGI-Modid: xfs-linux-melb:xfs-kern:31280a Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Use the generic xattr methods.Lachlan McIlroy
Use the generic set, get and removexattr methods and supply the s_xattr array with fine-grained handlers. All XFS/Linux highlevel attr handling is rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so that it's separated from the generic low-level code. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-07-28[XFS] Invalidate dentry in unlink/rmdir if in case-insensitive modeBarry Naujok
The vfs_unlink/d_delete functionality in the Linux VFS make the dentry negative if it is the only inode being referenced. Case-insensitive mode doesn't work with negative dentries, so if using CI-mode, invalidate the dentry on unlink/rmdir. SGI-PV: 983102 SGI-Modid: xfs-linux-melb:xfs-kern:31308a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] Zero uninitialised xfs_da_args structure in xfs_dir2.cBarry Naujok
Fixes a problem in the xfs_dir2_remove and xfs_dir2_replace paths which intenally call directory format specific lookup funtions that assume args->cmpresult is zeroed. SGI-PV: 982606 SGI-Modid: xfs-linux-melb:xfs-kern:31268a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] Remove d_add call for an ENOENT lookup return codeBarry Naujok
SGI-PV: 981521 SGI-Modid: xfs-linux-melb:xfs-kern:31214a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com>
2008-07-28[XFS] kmem_free and kmem_realloc to use const void *Barry Naujok
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31212a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] XFS: ASCII case-insensitive supportBarry Naujok
Implement ASCII case-insensitive support. It's primary purpose is for supporting existing filesystems that already use this case-insensitive mode migrated from IRIX. But, if you only need ASCII-only case-insensitive support (ie. English only) and will never use another language, then this mode is perfectly adequate. ASCII-CI is implemented by generating hashes based on lower-case letters and doing lower-case compares. It implements a new xfs_nameops vector for doing the hashes and comparisons for all filename operations. To create a filesystem with this CI mode, use: # mkfs.xfs -n version=ci <device> SGI-PV: 981516 SGI-Modid: xfs-linux-melb:xfs-kern:31209a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] Return case-insensitive match for dentry cacheBarry Naujok
This implements the code to store the actual filename found during a lookup in the dentry cache and to avoid multiple entries in the dcache pointing to the same inode. To avoid polluting the dcache, we implement a new directory inode operations for lookup. xfs_vn_ci_lookup() stores the correct case name in the dcache. The "actual name" is only allocated and returned for a case- insensitive match and not an actual match. Another unusual interaction with the dcache is not storing negative dentries like other filesystems doing a d_add(dentry, NULL) when an ENOENT is returned. During the VFS lookup, if a dentry returned has no inode, dput is called and ENOENT is returned. By not doing a d_add, this actually removes it completely from the dcache to be reused. create/rename have to be modified to support unhashed dentries being passed in. SGI-PV: 981521 SGI-Modid: xfs-linux-melb:xfs-kern:31208a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-07-28[XFS] Add op_flags field and helpers to xfs_da_argsBarry Naujok
The end of the xfs_da_args structure has 4 unsigned char fields for true/false information on directory and attr operations using the xfs_da_args structure. The following converts these 4 into a op_flags field that uses the first 4 bits for these fields and allows expansion for future operation information (eg. case-insensitive lookup request). SGI-PV: 981520 SGI-Modid: xfs-linux-melb:xfs-kern:31206a Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 04:27:08 +0000