aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2007-12-06Use mutex_lock_killable in vfs_readdirLiam R. Howlett
Signed-off-by: Liam R. Howlett <howlett@gmail.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-06proc/base.c: Use task_is_*Matthew Wilcox
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-06proc/array.c: Use TASK_REPORTMatthew Wilcox
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-06Use wake_up_locked() in eventpollMatthew Wilcox
Replace the uses of __wake_up_locked with wake_up_locked Signed-off-by: Matthew Wilcox <matthew@wil.cx>
2007-12-05remove nonsense force-casts from ocfs2Al Viro
endianness annotations in networking code had been in place for quite a while; in particular, sin_port and s_addr are annotated as big-endian. Code in ocfs2 had __force casts added apparently to shut the sparse warnings up; of course, these days they only serve to *produce* warnings for no reason whatsoever... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05regression: bfs endianness bugAl Viro
BFS_FILEBLOCKS() expects struct bfs_inode * (on-disk data, with little- endian fields), not struct bfs_inode_info * (in-core stuff, with host- endian ones). It's a macro and fields with the right names are present in bfs_inode_info, so it compiles, but on big-endian host it gives bogus results. Introduced in commit f433dc56344cb72cc3de5ba0819021cec3aef807 ("Fixes to the BFS filesystem driver"). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05regression: cifs endianness bugAl Viro
access_flags_to_mode() gets on-the-wire data (little-endian) and treats it as host-endian. Introduced in commit e01b64001359034d04c695388870936ed3d1b56b ("[CIFS] enable get mode from ACL when cifsacl mount option specified") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05proc: fix proc_dir_entry refcountingAlexey Dobriyan
Creating PDEs with refcount 0 and "deleted" flag has problems (see below). Switch to usual scheme: * PDE is created with refcount 1 * every de_get does +1 * every de_put() and remove_proc_entry() do -1 * once refcount reaches 0, PDE is freed. This elegantly fixes at least two following races (both observed) without introducing new locks, without abusing old locks, without spreading lock_kernel(): 1) PDE leak remove_proc_entry de_put ----------------- ------ [refcnt = 1] if (atomic_read(&de->count) == 0) if (atomic_dec_and_test(&de->count)) if (de->deleted) /* also not taken! */ free_proc_entry(de); else de->deleted = 1; [refcount=0, deleted=1] 2) use after free remove_proc_entry de_put ----------------- ------ [refcnt = 1] if (atomic_dec_and_test(&de->count)) if (atomic_read(&de->count) == 0) free_proc_entry(de); /* boom! */ if (de->deleted) free_proc_entry(de); BUG: unable to handle kernel paging request at virtual address 6b6b6b6b printing eip: c10acdda *pdpt = 00000000338f8001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: af_packet ipv6 cpufreq_ondemand loop serio_raw psmouse k8temp hwmon sr_mod cdrom Pid: 23161, comm: cat Not tainted (2.6.24-rc2-8c0863403f109a43d7000b4646da4818220d501f #4) EIP: 0060:[<c10acdda>] EFLAGS: 00210097 CPU: 1 EIP is at strnlen+0x6/0x18 EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: 6b6b6b6b EDX: fffffffe ESI: c128fa3b EDI: f380bf34 EBP: ffffffff ESP: f380be44 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process cat (pid: 23161, ti=f380b000 task=f38f2570 task.ti=f380b000) Stack: c10ac4f0 00000278 c12ce000 f43cd2a8 00000163 00000000 7da86067 00000400 c128fa20 00896b18 f38325a8 c128fe20 ffffffff 00000000 c11f291e 00000400 f75be300 c128fa20 f769c9a0 c10ac779 f380bf34 f7bfee70 c1018e6b f380bf34 Call Trace: [<c10ac4f0>] vsnprintf+0x2ad/0x49b [<c10ac779>] vscnprintf+0x14/0x1f [<c1018e6b>] vprintk+0xc5/0x2f9 [<c10379f1>] handle_fasteoi_irq+0x0/0xab [<c1004f44>] do_IRQ+0x9f/0xb7 [<c117db3b>] preempt_schedule_irq+0x3f/0x5b [<c100264e>] need_resched+0x1f/0x21 [<c10190ba>] printk+0x1b/0x1f [<c107c8ad>] de_put+0x3d/0x50 [<c107c8f8>] proc_delete_inode+0x38/0x41 [<c107c8c0>] proc_delete_inode+0x0/0x41 [<c1066298>] generic_delete_inode+0x5e/0xc6 [<c1065aa9>] iput+0x60/0x62 [<c1063c8e>] d_kill+0x2d/0x46 [<c1063fa9>] dput+0xdc/0xe4 [<c10571a1>] __fput+0xb0/0xcd [<c1054e49>] filp_close+0x48/0x4f [<c1055ee9>] sys_close+0x67/0xa5 [<c10026b6>] sysenter_past_esp+0x5f/0x85 ======================= Code: c9 74 0c f2 ae 74 05 bf 01 00 00 00 4f 89 fa 5f 89 d0 c3 85 c9 57 89 c7 89 d0 74 05 f2 ae 75 01 4f 89 f8 5f c3 89 c1 89 c8 eb 06 <80> 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 c3 90 90 90 57 83 c9 EIP: [<c10acdda>] strnlen+0x6/0x18 SS:ESP 0068:f380be44 Also, remove broken usage of ->deleted from reiserfs: if sget() succeeds, module is already pinned and remove_proc_entry() can't happen => nobody can mark PDE deleted. Dummy proc root in netns code is not marked with refcount 1. AFAICS, we never get it, it's just for proper /proc/net removal. I double checked CLONE_NETNS continues to work. Patch survives many hours of modprobe/rmmod/cat loops without new bugs which can be attributed to refcounting. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05jbd: Fix assertion failure in fs/jbd/checkpoint.cJan Kara
Before we start committing a transaction, we call __journal_clean_checkpoint_list() to cleanup transaction's written-back buffers. If this call happens to remove all of them (and there were already some buffers), __journal_remove_checkpoint() will decide to free the transaction because it isn't (yet) a committing transaction and soon we fail some assertion - the transaction really isn't ready to be freed :). We change the check in __journal_remove_checkpoint() to free only a transaction in T_FINISHED state. The locking there is subtle though (as everywhere in JBD ;(). We use j_list_lock to protect the check and a subsequent call to __journal_drop_transaction() and do the same in the end of journal_commit_transaction() which is the only place where a transaction can get to T_FINISHED state. Probably I'm too paranoid here and such locking is not really necessary - checkpoint lists are processed only from log_do_checkpoint() where a transaction must be already committed to be processed or from __journal_clean_checkpoint_list() where kjournald itself calls it and thus transaction cannot change state either. Better be safe if something changes in future... Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05ufs: fix nexstep dir block sizeEvgeniy Dushistov
This patch fixes regression, introduced since 2.6.16. NextStep variant of UFS as OpenStep uses directory block size equals to 1024. Without this change, ufs_check_page fails in many cases. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Cc: Dave Bailey <dsbailey@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05aio: only account I/O wait time in read_events if there are active requestsJeff Moyer
On 2.6.24, top started showing 100% iowait on one CPU when a UML instance was running (but completely idle). The UML code sits in io_getevents waiting for an event to be submitted and completed. Fix this by checking ctx->reqs_active before scheduling to determine whether or not we are waiting for I/O. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Jeff Dike <jdike@addtoit.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6: (27 commits) [INET]: Fix inet_diag dead-lock regression [NETNS]: Fix /proc/net breakage [TEXTSEARCH]: Do not allow zero length patterns in the textsearch infrastructure [NETFILTER]: fix forgotten module release in xt_CONNMARK and xt_CONNSECMARK [NETFILTER]: xt_TCPMSS: remove network triggerable WARN_ON [DECNET]: dn_nl_deladdr() almost always returns no error [IPV6]: Restore IPv6 when MTU is big enough [RXRPC]: Add missing select on CRYPTO mac80211: rate limit wep decrypt failed messages rfkill: fix double-mutex-locking mac80211: drop unencrypted frames if encryption is expected mac80211: Fix behavior of ieee80211_open and ieee80211_close ieee80211: fix unaligned access in ieee80211_copy_snap mac80211: free ifsta->extra_ie and clear IEEE80211_STA_PRIVACY_INVOKED SCTP: Fix build issues with SCTP AUTH. SCTP: Fix chunk acceptance when no authenticated chunks were listed. SCTP: Fix the supported extensions paramter SCTP: Fix SCTP-AUTH to correctly add HMACS paramter. SCTP: Fix the number of HB transmissions. [TCP] illinois: Incorrect beta usage ...
2007-12-02[NETNS]: Fix /proc/net breakageEric W. Biederman
Well I clearly goofed when I added the initial network namespace support for /proc/net. Currently things work but there are odd details visible to user space, even when we have a single network namespace. Since we do not cache proc_dir_entry dentries at the moment we can just modify ->lookup to return a different directory inode depending on the network namespace of the process looking at /proc/net, replacing the current technique of using a magic and fragile follow_link method. To accomplish that this patch: - introduces a shadow_proc method to allow different dentries to be returned from proc_lookup. - Removes the old /proc/net follow_link magic - Fixes a weakness in our not caching of proc generic dentries. As shadow_proc uses a task struct to decided which dentry to return we can go back later and fix the proc generic caching without modifying any code that uses the shadow_proc method. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29tty: add the new termios2 ioctls to the compatible list.Heiko Carstens
Make them depend on TCGETS2. If that one is implemented the rest should be there as well. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix attribute caching after renameMiklos Szeredi
Invalidate attributes on rename, since some filesystems may update st_ctime. Reported by Szabolcs Szakacsits Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix uninitialized field in fuse_inodeJohn Muir
I found problems accessing (executing) previously existing files, until I did chmod on them (or setattr). If the fi->attr_version is not initialized, then it could be larger than fc->attr_version until a setattr is executed, and as a result the inode attributes would never be set. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix FUSE_FILE_OPS sendingMiklos Szeredi
FUSE_FILE_OPS is meant to signal that the kernel will send the open file to to the userspace filesystem for operations on open files, so that sillyrenaming unlinked files becomes unnecessary. However this needs VFS changes, which won't make it into 2.6.24. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: pass open flags to read and writeMiklos Szeredi
Some open flags (O_APPEND, O_DIRECT) can be changed with fcntl(F_SETFL, ...) after open, but fuse currently only sends the flags to userspace in open. To make it possible to correcly handle changing flags, send the current value to userspace in each read and write. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: cleanup: add fuse_get_attr_version()Miklos Szeredi
Extract repeated code into helper function, as suggested by Akpm. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix reading past EOFMiklos Szeredi
Currently reading a fuse file will stop at cached i_size and return EOF, even though the file might have grown since the attributes were last updated. So detect if trying to read past EOF, and refresh the attributes before continuing with the read. Thanks to mpb for the report. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fix up ext2_fs.h for userspace after reservations backportTobias Poschwatta
In commit a686cd898bd999fd026a51e90fb0a3410d258ddb: "Val's cross-port of the ext3 reservations code into ext2." include/linux/ext2_fs.h got a new function whose return value is only defined if __KERNEL__ is defined. Putting #ifdef __KERNEL__ around the function seems to help, patch below. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29proc: remove races from proc_id_readdir()Eric W. Biederman
Oleg noticed that the call of task_pid_nr_ns() in proc_pid_readdir is racy with respect to tasks exiting. After a bit of examination it also appears that the call itself is completely unnecessary. So to fix the problem this patch modifies next_tgid() to return both a tgid and the task struct in question. A structure is introduced to return these values because it is slightly cleaner and easier to optimize, and the resulting code is a little shorter. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29proc: fix NULL ->i_fop oopsAlexey Dobriyan
proc_kill_inodes() can clear ->i_fop in the middle of vfs_readdir resulting in NULL dereference during "file->f_op->readdir(file, buf, filler)". The solution is to remove proc_kill_inodes() completely: a) we don't have tricky modules implementing their tricky readdir hooks which could keeping this revoke from hell. b) In a situation when module is gone but PDE still alive, standard readdir will return only "." and "..", because pde->next was cleared by remove_proc_entry(). c) the race proc_kill_inode() destined to prevent is not completely fixed, just race window made smaller, because vfs_readdir() is run without sb_lock held and without file_list_lock held. Effectively, ->i_fop is cleared at random moment, which can't fix properly anything. BUG: unable to handle kernel NULL pointer dereference at virtual address 00000018 printing eip: c1061205 *pdpt = 0000000005b22001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: foo af_packet ipv6 cpufreq_ondemand loop serio_raw sr_mod k8temp cdrom hwmon amd_rng Pid: 2033, comm: find Not tainted (2.6.24-rc1-b1d08ac064268d0ae2281e98bf5e82627e0f0c56 #2) EIP: 0060:[<c1061205>] EFLAGS: 00010246 CPU: 0 EIP is at vfs_readdir+0x47/0x74 EAX: c6b6a780 EBX: 00000000 ECX: c1061040 EDX: c5decf94 ESI: c6b6a780 EDI: fffffffe EBP: c9797c54 ESP: c5decf78 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process find (pid: 2033, ti=c5dec000 task=c64bba90 task.ti=c5dec000) Stack: c5decf94 c1061040 fffffff7 0805ffbc 00000000 c6b6a780 c1061295 0805ffbc 00000000 00000400 00000000 00000004 0805ffbc 4588eff4 c5dec000 c10026ba 00000004 0805ffbc 00000400 0805ffbc 4588eff4 bfdc6c70 000000dc 0000007b Call Trace: [<c1061040>] filldir64+0x0/0xc5 [<c1061295>] sys_getdents64+0x63/0xa5 [<c10026ba>] sysenter_past_esp+0x5f/0x85 ======================= Code: 49 83 78 18 00 74 43 8d 6b 74 bf fe ff ff ff 89 e8 e8 b8 c0 12 00 f6 83 2c 01 00 00 10 75 22 8b 5e 10 8b 4c 24 04 89 f0 8b 14 24 <ff> 53 18 f6 46 1a 04 89 c7 75 0b 8b 56 0c 8b 46 08 e8 c8 66 00 EIP: [<c1061205>] vfs_readdir+0x47/0x74 SS:ESP 0068:c5decf78 hch: "Nice, getting rid of this is a very good step formwards. Unfortunately we have another copy of this junk in security/selinux/selinuxfs.c:sel_remove_entries() which would need the same treatment." Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: sysfs: fix off-by-one error in fill_read_buffer() kobject: two typo fixes UIO: add UIO documentation target to DocBook Makefile UIO: fix up the UIO documentation create /sys/.../power when CONFIG_PM is set allow LEGACY_PTYS to be set to 0
2007-11-28sysfs: fix off-by-one error in fill_read_buffer()Miao Xie
I found that there is a off-by-one problem in the following code. Version: 2.6.24-rc2 File: fs/sysfs/file.c:118-122 Function: fill_read_buffer -------------------------------------------------------------------- count = ops->show(kobj, attr_sd->s_attr.attr, buffer->page); sysfs_put_active_two(attr_sd); BUG_ON(count > (ssize_t)PAGE_SIZE); -------------------------------------------------------------------- Because according to the specification of the sysfs and the implement of the show methods, the show methods return the number of bytes which would be generated for the given input, excluding the trailing null.So if the return value of the show methods equals PAGE_SIZE - 1, the buffer is full in fact. And if the return value equals PAGE_SIZE, the resulting string was already truncated,or buffer overflow occurred. This patch fixes an off-by-one error in fill_read_buffer. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tejun Heo <teheo@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28vfs: coredumping fixIngo Molnar
fix: http://bugzilla.kernel.org/show_bug.cgi?id=3043 only allow coredumping to the same uid that the coredumping task runs under. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-27ocfs2: reverse inline-data truncate argsMark Fasheh
ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate sets i_size, and punching a hole ignores it. This exposed a problem where punching a hole in an inline-data file wasn't updating the page cache, so fix that too. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27ocfs2: Fix comparison in ocfs2_size_fits_inline_data()Mark Fasheh
This was causing us to prematurely push out inline data by one byte. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27ocfs2: Remove bug statement in ocfs2_dentry_iput()Mark Fasheh
The existing bug statement didn't take into account unhashed dentries which might not have a cluster lock on them. This could happen if a node exporting the file system via NFS is rebooted, re-exported to nfs clients and then unmounted. It's fine in this case to not have a dentry cluster lock. Just remove the bug statement and replace it with an error print, which does the proper checks. Though we want to know if something has happened which might have prevented a cluster lock from being created, it's definitely not necessary to panic the machine for this. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27[PATCH] ocfs2: Remove expensive bitmap scanningJan Kara
Enable expensive bitmap scanning only if DEBUG option is enabled. The bitmap scanning quite loads the CPU and on my machine the write throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync improves from 37 MB/s to 45.4 MB/s in local mode... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27ocfs2: log valid inode # on bad inodeMark Fasheh
If the inode block isn't valid then we don't want to print the value from that, instead print the block number which was passed in (which should always be correct). Also, turn this into a debug print for now - folks who hit an actual problem always have other logs indicating what the source is. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27ocfs2: Filter -ENOSPC in mlog_errno()Mark Fasheh
It's almost never worth printing in that situation and we keep forgetting to manually filter it out. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27[PATCH] fs/ocfs2: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-27ocfs2: Reset journal parameters after s_mount_opt updateMark Fasheh
Right now we're just setting them from the existing parameters, not the new ones that a remount specified. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-11-26Merge git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
* git://git.linux-nfs.org/pub/linux/nfs-2.6: NFS: Clean up new multi-segment direct I/O changes NFS: Ensure we return zero if applications attempt to write zero bytes NFS: Support multiple segment iovecs in the NFS direct I/O path NFS: Introduce iovec I/O helpers to fs/nfs/direct.c SUNRPC: Add missing "space" to net/sunrpc/auth_gss.c SUNRPC: make sunrpc/xprtsock.c:xs_setup_{udp,tcp}() static NFS: fs/nfs/dir.c should #include "internal.h" NFS: make nfs_wb_page_priority() static NFS: mount failure causes bad page state SUNRPC: remove NFS/RDMA client's binary sysctls kernel BUG at fs/nfs/namespace.c:108! - can be triggered by bad server sunrpc: rpc_pipe_poll may miss available data in some cases sunrpc: return error if unsupported enctype or cksumtype is encountered sunrpc: gss_pipe_downcall(), don't assume all errors are transient NFS: Fix the ustat() regression
2007-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: bump version of kernel/sched_debug.c sched: fix minimum granularity tunings sched: fix RLIMIT_CPU comment sched: fix kernel/acct.c comment sched: fix prev_stime calculation sched: don't forget to unlock uids_mutex on error paths
2007-11-26NFS: Clean up new multi-segment direct I/O changesChuck Lever
Simplify calling sequence of nfs_direct_{read,write}_schedule(), and rename them to reflect their new role. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-26NFS: Ensure we return zero if applications attempt to write zero bytesChuck Lever
A zero byte count direct write request should be a successful no-op, not an error. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-26NFS: Support multiple segment iovecs in the NFS direct I/O pathChuck Lever
Allow applications to perform asynchronous scatter-gather direct I/O to NFS files. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-26NFS: Introduce iovec I/O helpers to fs/nfs/direct.cChuck Lever
Add helpers that iterate over multi-segment iovecs. These will be used to support multi-segment scatter/gather direct I/O in a later patch. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-26NFS: fs/nfs/dir.c should #include "internal.h"Adrian Bunk
Every file should include the headers containing the prototypes for its global functions (in this case nfs_access_cache_shrinker()). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-26NFS: make nfs_wb_page_priority() staticAdrian Bunk
nfs_wb_page_priority() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-26NFS: mount failure causes bad page stateRussell King
While testing a kernel based upon ecd744eec3aa8bbc949ec04ed3fbf7ecb2958a0e (with wrong boot arguments), I got the following bad page state entry while NFS was trying to mount it's rootfs: IP-Config: Complete: device=eth0, addr=192.168.1.101, mask=255.255.255.0, gw=255.255.255.255, host=192.168.1.101, domain=, nis-domain=(none), bootserver=192.168.1.100, rootserver=192.168.1.100, rootpath= Looking up port of RPC 100003/2 on 192.168.1.100 rpcbind: server 192.168.1.100 not responding, timed out Root-NFS: Unable to get nfsd port number from server, using default Looking up port of RPC 100005/1 on 192.168.1.100 rpcbind: server 192.168.1.100 not responding, timed out Root-NFS: Unable to get mountd port number from server, using default mount: server 192.168.1.100 not responding, timed out Root-NFS: Server returned error -5 while mounting /nfs/rootfs/ VFS: Unable to mount root fs via NFS, trying floppy. Bad page state in process 'swapper' page:c02b1260 flags:0x00000400 mapping:00000000 mapcount:0 count:0 Trying to fix it up, but a reboot is needed Backtrace: [<c0023e34>] (dump_stack+0x0/0x14) from [<c0062570>] (bad_page+0x70/0xac) [<c0062500>] (bad_page+0x0/0xac) from [<c0064914>] (free_hot_cold_page+0x80/0x178) [<c0064894>] (free_hot_cold_page+0x0/0x178) from [<c0064a74>] (free_hot_page+0x14/0x18) [<c0064a60>] (free_hot_page+0x0/0x18) from [<c0067078>] (put_page+0xf8/0x154) [<c0066f80>] (put_page+0x0/0x154) from [<c007dbc8>] (kfree+0xc8/0xd0) [<c007db00>] (kfree+0x0/0xd0) from [<c00cbb54>] (nfs_get_sb+0x230/0x710) [<c00cb924>] (nfs_get_sb+0x0/0x710) from [<c0084334>] (vfs_kern_mount+0x58/0xac)[<c00842dc>] (vfs_kern_mount+0x0/0xac) from [<c00843c0>] (do_kern_mount+0x38/0xf4) [<c0084388>] (do_kern_mount+0x0/0xf4) from [<c0099c7c>] (do_mount+0x1e8/0x614) ... This seems to be caused by use of an uninitialised structure due to NULL options being passed to nfs_validate_mount_data(). Ensure that the parsed mount data is always initialised. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> (Trond: added fix for the same bug in nfs4_validate_mount_data()). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-26sched: fix prev_stime calculationIngo Molnar
Srivatsa Vaddagiri noticed occasionally incorrect CPU usage values in top and tracked it down to stime going below 0 in task_stime(). Negative values are possible there due to the sampled nature of stime/utime. Fix suggested by Balbir Singh. Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
2007-11-25[CIFS] Fix check after use error in ACL codeSteve French
Spotted by the coverity scanner. CC: Adrian Bunk <bunk@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-25Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6Steve French
2007-11-20[CIFS] Fix potential data corruption when writing out cached dirty pagesJeff Layton
Fix RedHat bug 329431 The idea here is separate "conscious" from "unconscious" flushes. Conscious flushes are those due to a fsync() or close(). Unconscious ones are flushes that occur as a side effect of some other operation or due to memory pressure. Currently, when an error occurs during an unconscious flush (ENOSPC or EIO), we toss out the page and don't preserve that error to report to the user when a conscious flush occurs. If after the unconscious flush, there are no more dirty pages for the inode, the conscious flush will simply return success even though there were previous errors when writing out pages. This can lead to data corruption. The easiest way to reproduce this is to mount up a CIFS share that's very close to being full or where the user is very close to quota. mv a file to the share that's slightly larger than the quota allows. The writes will all succeed (since they go to pagecache). The mv will do a setattr to set the new file's attributes. This calls filemap_write_and_wait, which will return an error since all of the pages can't be written out. Then later, when the flush and release ops occur, there are no more dirty pages in pagecache for the file and those operations return 0. mv then assumes that the file was written out correctly and deletes the original. CIFS already has a write_behind_rc variable where it stores the results from earlier flushes, but that value is only reported in cifs_close. Since the VFS ignores the return value from the release operation, this isn't helpful. We should be reporting this error during the flush operation. This patch does the following: 1) changes cifs_fsync to use filemap_write_and_wait and cifs_flush and also sync to check its return code. If it returns successful, they then check the value of write_behind_rc to see if an earlier flush had reported any errors. If so, they return that error and clear write_behind_rc. 2) sets write_behind_rc in a few other places where pages are written out as a side effect of other operations and the code waits on them. 3) changes cifs_setattr to only call filemap_write_and_wait for ATTR_SIZE changes. 4) makes cifs_writepages accurately distinguish between EIO and ENOSPC errors when writing out pages. Some simple testing indicates that the patch works as expected and that it fixes the reproduceable known problem. Acked-by: Dave Kleikamp <shaggy@austin.rr.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-20[CIFS] Fix spurious reconnect on 2nd peek from read of SMB lengthPetr Tesarik
When retrying kernel_recvmsg() because of a short read, check returned length against the remaining length, not against total length. This avoids unneeded session reconnects which would otherwise occur when kernel_recvmsg() finally returns zero when asked to read zero bytes. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-17kernel BUG at fs/nfs/namespace.c:108! - can be triggered by bad serverNeil Brown
Hi Trond, I have discovered that the BUG_ON in nfs_follow_mountpoint: BUG_ON(IS_ROOT(dentry)); can be triggered by a misbehaving server. What happens is the client does a lookup and discoveres that the named directory has a different fsid, so it initiates a mount. It then performs a GETATTR on the mounted directory and gets a different fsid again (due to a bug in the NFS server). This causes nfs_follow_mountpoint to be called on the newly mounted root, which triggers the BUG_ON. To duplicate this, have a directory which contains some mountpoints, and export that directory with the "crossmnt" flag using nfs-utils 1.1.1 (or 1.1.0 I think) The GETATTR on the root of the mounted filesystem will return the information for the top exportpoint, while a lookup will return the correct information. This difference causes the NFS client to BUG. I think the best way to fix this is to trap this possibility early, so just before completing the mount in the NFS client, check that it isn't going to use nfs_mountpoint_inode_operations. As long as i_op will never change once set (is that true?), this should be adequately safe. The following patch shows a possible approach, and it works for me. i.e. when the NFS server is misbehaving, I get ESTALE on those mountpoints, while when the NFS server is working correctly, I get correct behaviour on the client. NeilBrown Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-11-17NFS: Fix the ustat() regressionTrond Myklebust
Since 2.6.18, the superblock sb->s_root has been a dummy dentry with a dummy inode. This breaks ustat(), which actually uses sb->s_root in a vfstat() call. Fix this by making the s_root a dummy alias to the directory inode that was used when creating the superblock. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>