aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2008-03-06Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix inode leak in xfs_iget_core() [XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too many
2008-03-06[XFS] fix inode leak in xfs_iget_core()David Chinner
If the radix_tree_preload() fails, we need to destroy the inode we just read in before trying again. This could leak xfs_vnode structures when there is memory pressure. Noticed by Christoph Hellwig. SGI-PV: 977823 SGI-Modid: xfs-linux-melb:xfs-kern:30606a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-03-06[XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too manyDavid Chinner
wakeups Idle state is not being detected properly by the xfsaild push code. The current idle state is detected by an empty list which may never happen with mostly idle filesystem or one using lazy superblock counters. A single dirty item in the list that exists beyond the push target can result repeated looping attempting to push up to the target because it fails to check if the push target has been acheived or not. Fix by considering a dirty list with everything past the target as an idle state and set the timeout appropriately. SGI-PV: 977545 SGI-Modid: xfs-linux-melb:xfs-kern:30532a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-03-06NFS: use new LSM interfaces to explicitly set mount optionsEric Paris
NFS and SELinux worked together previously because SELinux had NFS specific knowledge built in. This design was approved by both groups back in 2004 but the recent NFS changes to use nfs_parsed_mount_data and the usage of nfs_clone_mount_data showed this to be a poor fragile solution. This patch fixes the NFS functionality regression by making use of the new LSM interfaces to allow an FS to explicitly set its own mount options. The explicit setting of mount options is done in the nfs get_sb functions which are called before the generic vfs hooks try to set mount options for filesystems which use text mount data. This does not currently support NFSv4 as that functionality did not exist in previous kernels and thus there is no regression. I will be adding the needed code, which I believe to be the exact same as the v3 code, in nfs4_get_sb for 2.6.26. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-03-06LSM/SELinux: Interfaces to allow FS to control mount optionsEric Paris
Introduce new LSM interfaces to allow an FS to deal with their own mount options. This includes a new string parsing function exported from the LSM that an FS can use to get a security data blob and a new security data blob. This is particularly useful for an FS which uses binary mount data, like NFS, which does not pass strings into the vfs to be handled by the loaded LSM. Also fix a BUG() in both SELinux and SMACK when dealing with binary mount data. If the binary mount data is less than one page the copy_page() in security_sb_copy_data() can cause an illegal page fault and boom. Remove all NFSisms from the SELinux code since they were broken by past NFS changes. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: debugfs: fix sparse warnings Driver core: Fix cleanup when failing device_add(). driver core: Remove dpm_sysfs_remove() from error path of device_add() PM: fix new mutex-locking bug in the PM core PM: Do not acquire device semaphores upfront during suspend kobject: properly initialize ksets sysfs: CONFIG_SYSFS_DEPRECATED fix driver core: fix up Kconfig text for CONFIG_SYSFS_DEPRECATED
2008-03-04ext3: fix mount option parsingJosef Bacik
The "resize" option won't be noticed as it comes after the NULL option, so if you try to mount (or in this case remount) with that option it won't be recognized. Signed-off-by: Josef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04eCryptfs: make ecryptfs_prepare_write decrypt the pageMichael Halcrow
When the page is not up to date, ecryptfs_prepare_write() should be acting much like ecryptfs_readpage(). This includes the painfully obvious step of actually decrypting the page contents read from the lower encrypted file. Note that this patch resolves a bug in eCryptfs in 2.6.24 that one can produce with these steps: # mount -t ecryptfs /secret /secret # echo "abc" > /secret/file.txt # umount /secret # mount -t ecryptfs /secret /secret # echo "def" >> /secret/file.txt # cat /secret/file.txt Without this patch, the resulting data returned from cat is likely to be something other than "abc\ndef\n". (Thanks to Benedikt Driessen for reporting this.) Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Benedikt Driessen <bdriessen@escrypt.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04fs/reiserfs/super.c: correct use of ! and &Julia Lawall
In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337 ("wmi: (!x & y) strikes again"), a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04vfs: fix NULL pointer dereference in fsync_buffers_list()Jan Kara
Fix NULL pointer dereference in fsync_buffers_list() introduced by recent fix of races in private_list handling. Since bh->b_assoc_map has been cleared in __remove_assoc_queue() we should really use original value stored in the 'mapping' variable. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04core dump: user_regset writebackRoland McGrath
This makes the user_regset-based core dump code call user_regset writeback hooks when available. This is necessary groundwork to allow IA64 to set CORE_DUMP_USE_REGSET. Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Roland McGrath <roland@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04debugfs: fix sparse warningsHarvey Harrison
extern does not belong in C files, move declaration to linux/debugfs.h fs/debugfs/file.c:42:30: warning: symbol 'debugfs_file_operations' was not declared. Should it be static? fs/debugfs/file.c:54:31: warning: symbol 'debugfs_link_operations' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH] fs/ocfs2/aops.c: Correct use of ! and & [2.6 patch] ocfs2: make dlm_do_assert_master() static [2.6 patch] make ocfs2_downconvert_thread() static [2.6 patch] fs/ocfs2/: possible cleanups [PATCH] ocfs2: le*_add_cpu conversion ocfs2: Fix writeout in ocfs2_data_convert_worker() ocfs2: Enable localalloc for local mounts
2008-03-04Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix blkdev_issue_flush() not detecting and passing EOPNOTSUPP back block: fix shadowed variable warning in blk-map.c block: remove extern on function definition cciss: remove READ_AHEAD define and use block layer defaults make cdrom.c:check_for_audio_disc() static block/genhd.c: proper externs unexport blk_rq_map_user_iov unexport blk_{get,put}_queue block/genhd.c: cleanups proper prototype for blk_dev_init() block/blk-tag.c should #include "blk.h" Fix DMA access of block device in 64-bit kernel on some non-x86 systems with 4GB or upper 4GB memory block: separate out padding from alignment block: restore the meaning of rq->data_len to the true data length resubmit: cciss: procfs updates to display info about many splice: only return -EAGAIN if there's hope of more data block: fix kernel-docbook parameters and files
2008-03-04block/genhd.c: proper externsAdrian Bunk
This patch adds proper externs for two structs in include/linux/genhd.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-04splice: only return -EAGAIN if there's hope of more dataJens Axboe
sys_tee() currently is a bit eager in returning -EAGAIN, it may do so even if we don't have a chance of anymore data becoming available. So improve the logic and only return -EAGAIN if we have an attached writer to the input pipe. Reported by Johann Felix Soden <johfel@gmx.de> and Patrick McManus <mcmanus@ducksong.com>. Tested-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-04Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6Steve French
2008-03-03[PATCH] fs/ocfs2/aops.c: Correct use of ! and &Julia Lawall
In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[2.6 patch] ocfs2: make dlm_do_assert_master() staticAdrian Bunk
This patch makes the needlessly global dlm_do_assert_master() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[2.6 patch] make ocfs2_downconvert_thread() staticAdrian Bunk
This patch makes the needlessly global ocfs2_downconvert_thread() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[2.6 patch] fs/ocfs2/: possible cleanupsAdrian Bunk
This patch contains the following cleanups that are now possible: - make the following needlessly global functions static: - dlmglue.c:ocfs2_process_blocked_lock() - heartbeat.c:ocfs2_node_map_init() - #if 0 the following unused global function plus support functions: - heartbeat.c:ocfs2_node_map_is_only() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03[PATCH] ocfs2: le*_add_cpu conversionMarcin Slusarz
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03ocfs2: Fix writeout in ocfs2_data_convert_worker()Mark Fasheh
Commit f1f540688eae66c274ff1c1133b5d9c687b28f58 "optimized" ocfs2_data_convert_worker() to "only do work for regular files". Unfortunately, I left out a '!', which casued it to *skip* regular files. This was hidden from testing until recently because the default data journaling mode (data=ordered) doesn't exercise this code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-03-03ocfs2: Enable localalloc for local mountsSunil Mushran
Commit 2fbe8d1ebe004425b4f7b8bba345623d2280be82 disabled localalloc for local mounts. This caused issues as ocfs2 uses localalloc to provide write locality. This patch enables localalloc for local mounts. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2008-03-03docbook: fix filesystems.tmpl source filesRandy Dunlap
Fix docbook problems in filesystems.tmpl. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-03Allow ARG_MAX execve string space even with a small stack limitLinus Torvalds
The new code that removed the limitation on the execve string size (which was historically 32 pages) replaced it with a much softer limit based on RLIMIT_STACK which is usually much larger than the traditional limit. See commit b6a2fea39318e43fee84fa7b0b90d68bed92d2ba ("mm: variable length argument support") for details. However, if you have a small stack limit (perhaps because you need lots of stacks in a threaded environment), the new heuristic of allowing up to 1/4th of RLIMIT_STACK to be used for argument and environment strings could actually be smaller than the old limit. So just say that it's ok to have up to ARG_MAX strings regardless of the value of RLIMIT_STACK, and check the rlimit only when going over that traditional limit. (Of course, if you actually have a *really* small stack limit, the whole stack itself will be limited before you hit ARG_MAX, but that has always been true and is clearly the right behaviour anyway). Acked-by: Carlos O'Donell <carlos@codesourcery.com> Cc: Michael Kerrisk <michael.kerrisk@googlemail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ollie Wild <aaw@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-01Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6Steve French
2008-02-28[XFS] If you mount an XFS filesystem with no mount options at all, thenJosef Jeff Sipek
the "ikeep" option is set rather than "noikeep". This regression was introduced in 970451. With no mount options specified, xfs_parseargs() does the following: int ikeep = 0; args->flags |= XFSMNT_BARRIER; args->flags2 |= XFSMNT2_COMPAT_IOSIZE; if (!options) goto done; It only sets the above two options by default and before, it also used to set XFSMNT_IDELETE by default. If options are specified, then if (!(args->flags & XFSMNT_DMAPI) && !ikeep) args->flags |= XFSMNT_IDELETE; is executed later on which is skipped by the "goto done;" above. The solution is to invert the logic. SGI-PV: 977771 SGI-Modid: xfs-linux-melb:xfs-kern:30590a Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-26Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Undo bit ops cleanup mod due to regression on 32-bit powermac [XFS] Undo bit ops cleanup mod due to regression on 32-bit powermac Remove empty file fs/xfs/Makefile-linux-2.6.
2008-02-26Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: add missing ext4_journal_stop() ext4: ext4_find_next_zero_bit needs an aligned address on some arch ext4: set EXT4_EXTENTS_FL only for directory and regular files ext4: Don't mark filesystem error if fallocate fails ext4: Fix BUG when writing to an unitialized extent ext4: Don't use ext4_dec_count() if not needed ext4: modify block allocation algorithm for the last group ext4: Don't claim block from group which has corrupt bitmap ext4: Get journal write access before modifying the extent tree ext4: Fix memory and buffer head leak in callers to ext4_ext_find_extent() ext4: Don't leave behind a half-created inode if ext4_mkdir() fails ext4: Fix kernel BUG at fs/ext4/mballoc.c:910! ext4: Fix locking hierarchy violation in ext4_fallocate() Remove incorrect BKL comments in ext4
2008-02-26[XFS] Undo bit ops cleanup mod due to regression on 32-bit powermacLachlan McIlroy
platform. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30559a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-26[XFS] Undo bit ops cleanup mod due to regression on 32-bit powermacLachlan McIlroy
platform. SGI-PV: 974005 SGI-Modid: xfs-linux-melb:xfs-kern:30558a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-26[CIFS] remove unused variableSteve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-25ext4: add missing ext4_journal_stop()Akinobu Mita
Add missing ext4_journal_stop() in error handling. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Stephen Tweedie <sct@redhat.com> Cc: adilger@clusterfs.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mingming Cao <cmm@us.ibm.com>
2008-02-25[CIFS] consolidate duplicate code in posix/unix inode handlingChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-02-25latencytop: change /proc task_struct access methodHiroshi Shimamoto
Change getting task_struct by get_proc_task() at read or write time, and returns -ESRCH if get_proc_task() returns NULL. This is same behavior as other /proc files. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-25latencytop: fix memory leak on latency proc fileHiroshi Shimamoto
At lstats_open(), calling get_proc_task() gets task struct, but it never put. put_task_struct() should be called when releasing. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-25latencytop: fix kernel panic while reading latency proc fileHiroshi Shimamoto
Reading /proc/<pid>/latency or /proc/<pid>/task/<tid>/latency could cause NULL pointer dereference. In lstats_open(), get_proc_task() can return NULL, in which case the kernel will oops at lstats_show_proc() because m->private is NULL. When get_proc_task() returns NULL, the kernel should return -ENOENT. This can be reproduced by the following script. while : do date bash -c 'ls > ls.$$' & pid=$! cat /proc/$pid/latency & cat /proc/$pid/latency & cat /proc/$pid/latency & cat /proc/$pid/latency done Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-23proc: add RLIMIT_RTTIME to /proc/<pid>/limitsEugene Teo
RLIMIT_RTTIME was introduced to allow the user to set a runtime timeout on real-time tasks: http://lkml.org/lkml/2007/12/18/218. This patch updates /proc/<pid>/limits with the new rlimit. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23efs: move headers out of include/linux/Christoph Hellwig
Merge include/linux/efs_fs{_i,_dir}.h into fs/efs/efs.h. efs_vh.h remains there because this is the IRIX volume header and shouldn't really be handled by efs but by the partitioning code. efs_sb.h remains there for now because it's exported to userspace. Of course this wrong and aboot should have a copy of it's own, but I'll leave that to a separate patch to avoid any contention. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23/proc/pid/pagemap: fix PM_SPECIAL macroHans Rosenfeld
There seems to be a bug in the PM_SPECIAL macro for /proc/pid/pagemap. I think masking out those other bits makes more sense then setting all those mask bits. Signed-off-by: Hans Rosenfeld <Hans.Rosenfeld@amd.com> Acked-by: Matt Mackall <mpm@selenic.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23ufs: fix parenthesisation in ufs_set_fs_state()Roel Kluin
This bug snuck in with commit 252e211e90ce56bf005cb533ad5a297c18c19407 Author: Mark Fortescue <mark@mtfhpc.demon.co.uk> Date: Tue Oct 16 23:26:31 2007 -0700 Add in SunOS 4.1.x compatible mode for UFS Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Evgeniy Dushistov <dushistov@mail.ru> Cc: Mark Fortescue <mark@mtfhpc.demon.co.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23fuse: fix permission checkingMiklos Szeredi
I added a nasty local variable shadowing bug to fuse in 2.6.24, with the result, that the 'default_permissions' mount option is basically ignored. How did this happen? - old err declaration in inner scope - new err getting declared in outer scope - 'return err' from inner scope getting removed - old declaration not being noticed -Wshadow would have saved us, but it doesn't seem practical for the kernel :( More testing would have also saved us :(( Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23ext4: ext4_find_next_zero_bit needs an aligned address on some archAneesh Kumar K.V
ext4_find_next_zero_bit and ext4_find_next_bit needs a long aligned address on x8_64. Add mb_find_next_zero_bit and mb_find_next_bit and use them in the mballoc. Fix: https://bugzilla.redhat.com/show_bug.cgi?id=433286 Eric Sandeen debugged the problem and suggested the fix. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-25ext4: set EXT4_EXTENTS_FL only for directory and regular filesAneesh Kumar K.V
In addition, don't inherit EXT4_EXTENTS_FL from parent directory. If we have a directory with extent flag set and later mount the file system with -o noextents, the files created in that directory will also have extent flag set but we would not have called ext4_ext_tree_init for them. This will cause error later when we are verifying the extent header Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-25ext4: Don't mark filesystem error if fallocate failsAneesh Kumar K.V
If we fail to allocate blocks don't call ext4_error. Also don't hide errors from ext4_get_blocks_wrap Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-25ext4: Fix BUG when writing to an unitialized extentMingming Cao
This patch fixes a bug when writing to preallocated but uninitialized blocks, which resulted in a BUG in fs/buffer.c saying that the buffer is not mapped. When writing to a file, ext4_get_block_wrap() is called with create=1 in order to request that blocks be allocated if necessary. It currently calls ext4_get_blocks() with create=0 in order to do a lookup first. If the inode contains an unitialized data block, the buffer head is left unampped, which ext4_get_blocks_wrap() returns, causing the BUG. We fix this by checking to see if the buffer head is unmapped, and if so, we make sure the the buffer head is mapped by calling ext4_ext_get_blocks with create=1. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-02-21Merge branch 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: Wrap buffers used for rpc debug printks into RPC_IFDEBUG nfs: fix sparse warnings NFS: flush signals before taking down callback thread
2008-02-21Wrap buffers used for rpc debug printks into RPC_IFDEBUGPavel Emelyanov
Sorry for the noise, but here's the v3 of this compilation fix :) There are some places, which declare the char buf[...] on the stack to push it later into dprintk(). Since the dprintk sometimes (if the CONFIG_SYSCTL=n) becomes an empty do { } while (0) stub, these buffers cause gcc to produce appropriate warnings. Wrap these buffers with RPC_IFDEBUG macro, as Trond proposed, to compile them out when not needed. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-21dlm: fix rcom_names message to selfDavid Teigland
The recent patch to validate data lengths in rcom_names messages failed to account for fake messages a node directs to itself before ever sending it. In this case we need to fill in the message length in the header for the validation code to use. Signed-off-by: David Teigland <teigland@redhat.com>