aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2008-02-069p: transport API reorganizationEric Van Hensbergen
This merges the mux.c (including the connection interface) with trans_fd in preparation for transport API changes. Ultimately, trans_fd will need to be rewritten to clean it up and simplify the implementation, but this reorganization is viewed as the first step. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-02-069p: fix mmap to be read-onlyEric Van Hensbergen
v9fs was allowing writable mmap which could lead to kernel BUG() cases. This sets the mmap function to generic_file_readonly_mmap which (correctly) returns an error to applications which open mmap for writing. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-02-069p: add support for sticky bitAnthony Liguori
GDM gets unhappy if /var/gdm doesn't have the sticky bit set. This patch adds support for the sticky bit in much the same way setuid/setgid is supported. With this patch, I can launch X from a v9fs rootfs (although I quickly run out of fds in the server once gnome starts up). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-02-069p: fix bug in attach-per-userEric Van Hensbergen
When a new user attached at a directory other than the root, he would end up in the parent directory of the cwd. This was due to a logic error in the code which attaches the user at the mount point and walks back to the cwd. This patch fixes that. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2008-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix deadlock, make pgd_lock irq-safe virtio: fix trivial build bug x86: fix mttr trimming x86: delay CPA self-test and repeat it x86: fix 64-bit sections generic: add __FINITDATA x86: remove suprious ifdefs from pageattr.c x86: mark the .rodata section also NX x86: fix iret exception recovery on 64-bit cpuidle: dubious one-bit signed bitfield in cpuidle.h x86: fix sparse warnings in powernow-k8.c x86: fix sparse error in traps_32.c x86: trivial sparse/checkpatch in quirks.c x86 ptrace: disallow null cs/ss MAINTAINERS: RDC R-321x SoC maintainer brk randomization: introduce CONFIG_COMPAT_BRK brk: check the lower bound properly x86: remove X2 workaround x86: make spurious fault handler aware of large mappings x86: make traps on entry code be debuggable in user space, 64-bit
2008-02-06brk randomization: introduce CONFIG_COMPAT_BRKIngo Molnar
based on similar patch from: Pavel Machek <pavel@ucw.cz> Introduce CONFIG_COMPAT_BRK. If disabled then the kernel is free (but not obliged to) randomize the brk area. Heap randomization breaks ancient binaries, so we keep COMPAT_BRK enabled by default. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-06ext3: fix lock inversion in direct IOJan Kara
We cannot start transaction in ext3_direct_IO() and just let it last during the whole write because dio_get_page() acquires mmap_sem which ranks above transaction start (e.g. because we have dependency chain mmap_sem->PageLock->journal_start, or because we update atime while holding mmap_sem) and thus deadlocks could happen. We solve the problem by starting a transaction separately for each ext3_get_block() call. We *could* have a problem that we allocate a block and before its data are written out the machine crashes and thus we expose stale data. But that does not happen because for hole-filling generic code falls back to buffered writes and for file extension, we add inode to orphan list and thus in case of crash, journal replay will truncate inode back to the original size. [akpm@linux-foundation.org: build fix] Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Cc: Zach Brown <zach.brown@oracle.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext3: remove unused code from ext3_find_entry()Mariusz Kozlowski
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: cleanup ext[234]_bg_num_gdb()Akinobu Mita
Use ext[234]_bg_has_super() to remove duplicate code. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: remove unused argument for ext[234]_find_goal()Akinobu Mita
The argument chain for ext[234]_find_goal() is not used. This patch removes it and fixes comment as well. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: use ext[234]_get_group_desc()Akinobu Mita
Use ext[234]_get_group_desc() to get group descriptor from group number. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext[234]: fix comment for nonexistent variableAkinobu Mita
The comment in ext[234]_new_blocks() describes about "i". But there is no local variable called "i" in that scope. I guess it has been renamed to group_no. Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext3: change the default behaviour on errorAneesh Kumar K.V
ext3 file system was by default ignoring errors and continuing. This is not a good default as continuing on error could lead to file system corruption. Change the default to mark the file system readonly. Debian and ubuntu already does this as the default in their fstab. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Jan Kara <jack@ucw.cz> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext3: return after ext3_error in case of failuresAneesh Kumar K.V
This fixes some instances where we were continuing after calling ext3_error. ext3_error calls panic only if errors=panic mount option is set. So we need to make sure we return correctly after ext3_error call Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06make jbd/journal.c:__journal_abort_hard() staticAdrian Bunk
__journal_abort_hard() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06BKL-removal: remove incorrect comment refering to lock_kernel() from jbd/jbd2Andi Kleen
None of the callers of this function does actually take the BKL as far as I can see. So remove the comment refering to the BKL. Signed-off-by: Andi Kleen <ak@suse.de> Cc: <linux-ext4@vger.kernel.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06BKL-removal: remove incorrect BKL comment in ext2Andi Kleen
No BKL used anywhere, so don't mention it. Signed-off-by: Andi Kleen <ak@suse.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06BKL-removal: convert ext2 over to use unlocked_ioctlAndi Kleen
I checked ext2_ioctl and could not find anything in there that would need the BKL. So convert it over to use unlocked_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext3: add block bitmap validationAneesh Kumar K.V
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given corresponding to block bitmap, inode bitmap and inode tables. Validate the block bitmap against these blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext2: add block bitmap validationAneesh Kumar K.V
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given corresponding to block bitmap, inode bitmap and inode tables. Validate the block bitmap against these blocks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: limit queued background requestsMiklos Szeredi
Libfuse basically creates a new thread for each new request. This is fine for synchronous requests, which are naturally limited. However background requests (especially writepage) can cause a thread creation storm. To avoid this, limit the number of background requests available to userspace. This is done by introducing another queue for background requests, and a counter for the number of "active" requests, which are currently available for userspace. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: save space in struct fuse_reqMiklos Szeredi
Move the fields 'dentry' and 'vfsmount' into the request specific union, since these are only used for the RELEASE request. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: fix attribute caching after createMiklos Szeredi
Invalidate attributes on create, since st_ctime is updated. Reported by Szabolcs Szakacsits. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ecryptfs: check for existing key_tfm at mount timeEric Sandeen
Jeff Moyer pointed out that a mount; umount loop of ecryptfs, with the same cipher & other mount options, created a new ecryptfs_key_tfm_cache item each time, and the cache could grow quite large this way. Looking at this with mhalcrow, we saw that ecryptfs_parse_options() unconditionally called ecryptfs_add_new_key_tfm(), which is what was adding these items. Refactor ecryptfs_get_tfm_and_mutex_for_cipher_name() to create a new helper function, ecryptfs_tfm_exists(), which checks for the cipher on the cached key_tfm_list, and sets a pointer to it if it exists. This can then be called from ecryptfs_parse_options(), and new key_tfm's can be added only when a cached one is not found. With list locking changes suggested by akpm. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06eCryptfs: change the type of cipher_code from u16 to u8Trevor Highland
Only the lower byte of cipher_code is ever used, so it makes sense for its type to be u8. Signed-off-by: Trevor Highland <trevor.highland@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06eCryptfs: Minor fixes to printk messagesMichael Halcrow
The printk statements that result when the user does not have the proper key available could use some refining. Signed-off-by: Mike Halcrow <mhalcrow@us.ibm.com> Cc: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ecryptfs: remove debug as mount option, and warn if set via modprobeEric Sandeen
ecryptfs_debug really should not be a mount option; it is not per-mount, but rather sets a global "ecryptfs_verbosity" variable which affects all mounted filesysytems. It's already settable as a module load option, I think we can leave it at that. Also, if set, since secret values come out in debug messages, kick things off with a stern warning. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ecryptfs: make show_options reflect actual mount optionsEric Sandeen
Change ecryptfs_show_options to reflect the actual mount options in use. Note that this does away with the "dir=" output, which is not a valid mount option and appears to be unused. Mount options such as "ecryptfs_verbose" and "ecryptfs_xattr_metadata" are somewhat indeterminate for a given fs, but in any case the reported mount options can be used in a new mount command to get the same behavior. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06eCryptfs: set inode key only once per crypto operationTrevor Highland
There is no need to keep re-setting the same key for any given eCryptfs inode. This patch optimizes the use of the crypto API and helps performance a bit. Signed-off-by: Trevor Highland <trevor.highland@gmail.com> Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06eCryptfs: track header bytes rather than extentsMichael Halcrow
Remove internal references to header extents; just keep track of header bytes instead. Headers can easily span multiple pages with the recent persistent file changes. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fs/ecryptfs/: possible cleanupsAdrian Bunk
- make the following needlessly global code static: - crypto.c:ecryptfs_lower_offset_for_extent() - crypto.c:key_tfm_list - crypto.c:key_tfm_list_mutex - inode.c:ecryptfs_getxattr() - main.c:ecryptfs_init_persistent_file() - remove the no longer used mmap.c:ecryptfs_lower_page_cache - #if 0 the unused read_write.c:ecryptfs_read() Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06make sys_poll() wait at least timeout msKarsten Wiese
schedule_timeout(jiffies) waits for at least jiffies - 1. Add 1 jiffie to the timeout_jiffies calculated in sys_poll() to wait at least timeout_msecs, like poll() manpage says. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Use ilog2() in fs/namespace.cEric Dumazet
We can use ilog2() in fs/namespace.c to compute hash_bits and hash_mask at compile time, not runtime. [akpm@linux-foundation.org: clean it all up] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06partition: use DEFAULT_SGI_PARTITION for SGI_PARTION defaultThomas Bogendoerfer
Use DEFAULT_SGI_PARTITION for SGI_PARTION default Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ext2: xip check fixNick Piggin
ext2 should not worry about checking sb->s_blocksize for XIP before the sb's blocksize actually gets set. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fs/reiserfs/xattr.c: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
Signed-off-by: Denis Cheng <crquan@gmail.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06quota: improve inode list scanning in add_dquot_ref()Jan Kara
We restarted scan of sb->s_inodes list whenever we had to drop inode_lock in add_dquot_ref(). This leads to overall quadratic running time and thus add_dquot_ref() can take several minutes when called on a life filesystem. We fix the problem by using the fact that inode cannot be removed from s_inodes list while we hold a reference to it and thus we can safely restart the scan if we don't drop the reference. Here we use the fact that inodes freshly added to s_inodes list are already guaranteed to have quotas properly initialized and the ordering of inodes on s_inodes list does not change so we cannot skip any inode. Thanks goes to Nick <gentuu@gmail.com> for analyzing the problem and testing the fix. [akpm@linux-foundation.org: iput(NULL) is legal] Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick <gentuu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06inotify: remove debug codeNick Piggin
The inotify debugging code is supposed to verify that the DCACHE_INOTIFY_PARENT_WATCHED scalability optimisation does not result in notifications getting lost nor extra needless locking generated. Unfortunately there are also some races in the debugging code. And it isn't very good at finding problems anyway. So remove it for now. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Robert Love <rlove@google.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Jan Kara <jack@ucw.cz> Cc: Yan Zheng <yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06inotify: fix raceNick Piggin
There is a race between setting an inode's children's "parent watched" flag when placing the first watch on a parent, and instantiating new children of that parent: a child could miss having its flags set by set_dentry_child_flags, but then inotify_d_instantiate might still see !inotify_inode_watched. The solution is to set_dentry_child_flags after adding the watch. Locking is taken care of, because both set_dentry_child_flags and inotify_d_instantiate hold dcache_lock and child->d_locks. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Robert Love <rlove@google.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Jan Kara <jack@ucw.cz> Cc: Yan Zheng <yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06kill an unused PTR_ERR in bdev_cache_init()Qi Yong
Signed-off-by: Qi Yong <qiyong@fc-cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06get rid of NR_OPEN and introduce a sysctl_nr_openEric Dumazet
NR_OPEN (historically set to 1024*1024) actually forbids processes to open more than 1024*1024 handles. Unfortunatly some production servers hit the not so 'ridiculously high value' of 1024*1024 file descriptors per process. Changing NR_OPEN is not considered safe because of vmalloc space potential exhaust. This patch introduces a new sysctl (/proc/sys/fs/nr_open) wich defaults to 1024*1024, so that admins can decide to change this limit if their workload needs it. [akpm@linux-foundation.org: export it for sparc64] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06reiserfs: complement va_start() with va_end().Richard Knutsson
Complement va_start() with va_end(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06inotify: send IN_ATTRIB events when link count changesJan Kara
Currently, no notification event has been sent when inode's link count changed. This is inconvenient for the application in some cases: Suppose you have the following directory structure foo/test bar/ and you watch test. If someone does "mv foo/test bar/", you get event IN_MOVE_SELF and you know something has happened with the file "test". However if someone does "ln foo/test bar/test" and "rm foo/test" you get no inotify event for the file "test" (only directories "foo" and "bar" receive events). Furthermore it could be argued that link count belongs to file's metadata and thus IN_ATTRIB should be sent when it changes. The following patch implements sending of IN_ATTRIB inotify events when link count of the inode changes, i.e., when a hardlink to the inode is created or when it is removed. This event is sent in addition to all the events sent so far. In particular, when a last link to a file is removed, IN_ATTRIB event is sent in addition to IN_DELETE_SELF event. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Morten Welinder <mwelinder@gmail.com> Cc: Robert Love <rlove@google.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Steven French <sfrench@us.ibm.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06hfs: update comment to reflect actual init and exit routinesRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06address hfs on-disk corruption robustness review commentsEric Sandeen
Address Roman's review comments for the previously sent on-disk corruption hfs robustness patch. - use 0 as a failure value, rather than making a new macro HFS_BAD_KEYLEN, and use a switch statement instead of if's. - Add new fail: target to __hfs_brec_find to skip assignments using bad values when exiting with a failure. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06NCPFS: update diagnostic strings to match routine names.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fs: use list_for_each_entry_reverse and kill sb_entryAkinobu Mita
Use list_for_each_entry_reverse for super_blocks list and remove unused sb_entry macro. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fs: use hlist_unhashedAkinobu Mita
Use hlist_unhashed() instead of opencoded equivalent. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06proc: loadavg reading raceMichal Schmidt
The avenrun[] values are supposed to be protected by xtime_lock. loadavg_read_proc does not use it. Theoretically this may result in an occasional glitch when the value read from /proc/loadavg would be as much as 1<<11 times higher than it should be. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fs: remove dead config CONFIG_HAS_COMPAT_EPOLL_EVENT symbolJiri Olsa
Remove dead config CONFIG_HAS_COMPAT_EPOLL_EVENT symbol. Signed-off-by: Jiri Olsa <olsajiri@gmail.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>