aboutsummaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2008-07-25msdos fs: remove unsettable atari optionRene Scharfe
It has been impossible to set the option 'atari' of the MSDOS filesystem for several years. Since nobody seems to have missed it, let's remove its remains. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fat: small optimization to __fat_readdir()OGAWA Hirofumi
This removes unnecessary parsing for directory entries. If short_only, we don't need to parse longname. And if !both and it found the longname, we don't need shortname. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fat: use same logic in fat_search_long() and __fat_readdir()OGAWA Hirofumi
This uses uses stack for shortname, and uses __getname() for longname in fat_search_long() and __fat_readdir(). By this, it removes unneeded __getname() for shortname. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fat: cleanup fs/fat/dir.cOGAWA Hirofumi
This is no logic changes, just cleans fs/fat/dir.c up. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fat/dir.c: switch to struct __fat_direntAdrian Bunk
struct __fat_dirent is what was formerly the kernel struct dirent (that was different from the userspace struct dirent). Converting all fat users to struct __fat_dirent will allow us to get rid of the conflicting struct dirent definition. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fat: fix parse_options()OGAWA Hirofumi
Current parse_options() exits too early. We need to run the code of bottom in this function even if users doesn't specify options. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25reiserfs: remove double definitions of xattr macrosShen Feng
remove the definitions of macros: XATTR_SECURITY_PREFIX XATTR_TRUSTED_PREFIX XATTR_USER_PREFIX since they are defined in linux/xattr.h Signed-off-by: Shen Feng <shen@cn.fujitsu.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25reiserfs: convert j_commit_lock to mutexJeff Mahoney
j_commit_lock is a semaphore but uses it as if it were a mutex. This patch converts it to a mutex. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Edward Shishkin <edward.shishkin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25reiserfs: convert j_flush_sem to mutexJeff Mahoney
j_flush_sem is a semaphore but uses it as if it were a mutex. This patch converts it to a mutex. [akpm@linux-foundation.org: fix mutex_trylock retval treatment] Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Edward Shishkin <edward.shishkin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25reiserfs: convert j_lock to mutexJeff Mahoney
j_lock is a semaphore but uses it as if it were a mutex. This patch converts it to a mutex. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Edward Shishkin <edward.shishkin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25reiserfs: correct mount option parsing to detect when quota options can be ↵Jan Kara
changed We should not allow user to change quota mount options when quota is just suspended. It would make mount options and internal quota state inconsistent. Also we should not allow user to change quota format when quota is turned on. On the other hand we can just silently ignore when some option is set to the value it already has (some mount versions do this on remount). Finally, we should not discard current quota options if parsing of mount options fails. Cc: <reiserfs-devel@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25reiserfs: fix typos in messages and comments (journalled -> journaled)Jan Kara
Cc: <reiserfs-devel@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25reiserfs: fix synchronization of quota files in journal=data modeJan Kara
In journal=data mode, it is not enough to do write_inode_now() as done in vfs_quota_on() to write all data to their final location (which is needed for quota_read to work correctly). Calling journal_end_sync() before calling vfs_quota_on() does it's job because transactions are committed to the journal and data marked as dirty in memory so write_inode_now() writes them to their final locations. Cc: <reiserfs-devel@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25hfsplus: convert the extents_lock in a mutexMatthias Kaehlcke
Apple Extended HFS file system: The semaphore extents lock is used as a mutex. Convert it to the mutex API. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25hfs: convert extents_lock in a mutexMatthias Kaehlcke
Apple Macintosh file system: The semaphore extens_lock is used as a mutex. Convert it to the mutex API Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25hfs: convert bitmap_lock in a mutexMatthias Kaehlcke
Apple Macintosh file system: The semaphore bitmap_lock is used as a mutex. Convert it to the mutex API Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25coda: remove CODA_FS_OLD_APIAdrian Bunk
While fixing CONFIG_ leakages to the userspace kernel headers I ran into CODA_FS_OLD_API. After five years, are there still people using the old API left? Especially considering that you have to choose at compile time which API to support in the kernel (and distributions tend to offer the new API for some time). Jan: "The old API can definitely go. Around the time the new interface went in there were some non-Coda userspace file system implementations that took a while longer to convert to the new API, but by now they all switched to the new interface or in some cases to a FUSE-based solution." Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25isofs: fix minor filesystem corruptionAdam Greenblatt
Some iso9660 images contain files with rockridge data that is either incorrect or incompletely parsed. Prior to commit f2966632a134e865db3c819346a1dc7d96e05309 ("[PATCH] rock: handle directory overflows") (included with kernel 2.6.13) the kernel ignored the rockridge data for these files, while still allowing the files to be accessed under their non-rockridge names. That commit inadvertently changed things so that files with invalid rockridge data could not be accessed at all. (I ran across the problem when comparing some old CDs with hard disk copies I had made long ago under kernel 2.4: a few of the files on the hard disk copies were no longer visible on the CDs.) This change reverts to the pre-2.6.13 behavior. Signed-off-by: Adam Greenblatt <adam.greenblatt@gmail.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: validate directory entry data before useDuane Griffin
ext3_dx_find_entry uses ext3_next_entry without verifying that the entry is valid. If its rec_len == 0 this causes an infinite loop. Refactor the loop to check the validity of entries before checking whether they match and moving onto the next one. There are other uses of ext3_next_entry in this file which also look problematic. They should be reviewed and fixed if/when we have a test-case that triggers them. This patch fixes the first case (image hdb.25.softlockup.gz) reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882. Signed-off-by: Duane Griffin <duaneg@dghda.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: don't abort if flushing file data failedHidehiro Kawai
In ordered mode, the current jbd aborts the journal if a file data buffer has an error. But this behavior is unintended, and we found that it has been adopted accidentally. This patch undoes it and just calls printk() instead of aborting the journal. Additionally, set AS_EIO into the address_space object of the failed buffer which is submitted by journal_do_submit_data() so that fsync() can get -EIO. Missing error checkings are also added to inform errors on file data buffers to the user. The following buffers are targeted. (a) the buffer which has already been written out by pdflush (b) the buffer which has been unlocked before scanned in the t_locked_list loop [akpm@linux-foundation.org: improve grammar in a printk] Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: kill 2 useless magic numbersLi Zefan
dx_root_limit() will never return 20, and I can't figure out what 20 stands for. This function has never changed since htree directory indexing was merged. Similar for dx_node_limit() and the magic 22. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Andreas Dilger <adilger@sun.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: positively dispose the unmapped data buffers in ↵Toshiyuki Okajima
journal_commit_transaction() After ext3-ordered files are truncated, there is a possibility that the pages which cannot be estimated still remain. Remaining pages can be released when the system has really few memory. So, it is not memory leakage. But the resource management software etc. may not work correctly. It is possible that journal_unmap_buffer() cannot release the buffers, and the pages to which they belong because they are attached to a commiting transaction and journal_unmap_buffer() cannot release them. To release such the buffers and the pages later, journal_unmap_buffer() leaves it to journal_commit_transaction(). (journal_unmap_buffer() puts the mark 'BH_Freed' to the buffers so that journal_commit_transaction() can identify whether they can be released or not.) In the journalled mode and the writeback mode, jbd does with only metadata buffers. But in the ordered mode, jbd does with metadata buffers and also data buffers. Actually, journal_commit_transaction() releases only the metadata buffers of which release is demanded by journal_unmap_buffer(), and also releases the pages to which they belong if possible. As a result, the data buffers of which release is demanded by journal_unmap_buffer() remain after a transaction commits. And also the pages to which they belong remain. Such the remained pages don't have mapping any longer. Due to this fact, there is a possibility that the pages which cannot be estimated remain. The metadata buffers marked 'BH_Freed' and the pages to which they belong can be released at 'JBD: commit phase 7'. Therefore, by applying the same code into 'JBD: commit phase 2' (where the data buffers are done with), journal_commit_transaction() can also release the data buffers marked 'BH_Freed' and the pages to which they belong. As a result, all the buffers marked 'BH_Freed' can be released, and also all the pages to which these buffers belong can be released at journal_commit_transaction(). So, the page which cannot be estimated is lost. <<Excerpt of code at 'JBD: commit phase 7'>> > spin_lock(&journal->j_list_lock); > while (commit_transaction->t_forget) { > transaction_t *cp_transaction; > struct buffer_head *bh; > > jh = commit_transaction->t_forget; >... > if (buffer_freed(bh)) { > ^^^^^^^^^^^^^^^^^^^^^^^^ > clear_buffer_freed(bh); > ^^^^^^^^^^^^^^^^^^^^^^^^ > clear_buffer_jbddirty(bh); > } > > if (buffer_jbddirty(bh)) { > JBUFFER_TRACE(jh, "add to new checkpointing trans"); > __journal_insert_checkpoint(jh, commit_transaction); > JBUFFER_TRACE(jh, "refile for checkpoint writeback"); > __journal_refile_buffer(jh); > jbd_unlock_bh_state(bh); > } else { > J_ASSERT_BH(bh, !buffer_dirty(bh)); > ... > JBUFFER_TRACE(jh, "refile or unfile freed buffer"); > __journal_refile_buffer(jh); > if (!jh->b_transaction) { > jbd_unlock_bh_state(bh); > /* needs a brelse */ > journal_remove_journal_head(bh); > release_buffer_page(bh); > ^^^^^^^^^^^^^^^^^^^^^^^^ > } else > } **************************************************************** * Apply the code of "^^^^^^" lines into 'JBD: commit phase 2' * **************************************************************** At journal_commit_transaction() code, there is one extra message in the series of jbd debug messages. ("JBD: commit phase 2") This patch fixes it, too. Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Acked-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: unexport journal_update_superblockAdrian Bunk
Remove the unused EXPORT_SYMBOL(journal_update_superblock). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: handle deleting corrupted indirect blocksDuane Griffin
While freeing indirect blocks we attach a journal head to the parent buffer head, free the blocks, then journal the parent. If the indirect block list is corrupted and points to the parent the journal head will be detached when the block is cleared, causing an OOPS. Check for that explicitly and handle it gracefully. This patch fixes the third case (image hdb.20000057.nullderef.gz) reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882. Immediately above the change, in the ext3_free_data function, we call ext3_clear_blocks to clear the indirect blocks in this parent block. If one of those blocks happens to actually be the parent block it will clear b_private / BH_JBD. I did the check at the end rather than earlier as it seemed more elegant. I don't think there should be much practical difference, although it is possible the FS may not be quite so badly corrupted if we did it the other way (and didn't clear the block at all). To be honest, I'm not convinced there aren't other similar failure modes lurking in this code, although I couldn't find any with a quick review. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Duane Griffin <duaneg@dghda.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: don't read inode block if the buffer has a write errorHidehiro Kawai
A transient I/O error can corrupt inode data. Here is the scenario: (1) update inode_A at the block_B (2) pdflush writes out new inode_A to the filesystem, but it results in write I/O error, at this point, BH_Uptodate flag of the buffer for block_B is cleared and BH_Write_EIO is set (3) create new inode_C which located at block_B, and __ext3_get_inode_loc() tries to read on-disk block_B because the buffer is not uptodate (4) if it can read on-disk block_B successfully, inode_A is overwritten by old data This patch makes __ext3_get_inode_loc() not read the inode block if the buffer has BH_Write_EIO flag. In this case, the buffer should have the latest information, so setting the uptodate flag to the buffer (this avoids WARN_ON_ONCE() in mark_buffer_dirty().) According to this change, we would need to test BH_Write_EIO flag for the error checking. Currently nobody checks write I/O errors on metadata buffers, but it will be done in other patches I'm working on. Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi OSHIMA <satoshi.oshima.fk@hitachi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: handle corrupted orphan list at mountDuane Griffin
If the orphan node list includes valid, untruncatable nodes with nlink > 0 the ext3_orphan_cleanup loop which attempts to delete them will not do so, causing it to loop forever. Fix by checking for such nodes in the ext3_orphan_get function. This patch fixes the second case (image hdb.20000009.softlockup.gz) reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: printk warning fix] Signed-off-by: Duane Griffin <duaneg@dghda.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: remove double definitions of xattr macrosShen Feng
remove the definitions of macros: XATTR_TRUSTED_PREFIX XATTR_USER_PREFIX since they are defined in linux/xattr.h Signed-off-by: Shen Feng <shen@cn.fujitsu.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: fix race between free buffer and commit transactionMingming Cao
journal_try_to_free_buffers() could race with jbd commit transaction when the later is holding the buffer reference while waiting for the data buffer to flush to disk. If the caller of journal_try_to_free_buffers() request tries hard to release the buffers, it will treat the failure as error and return back to the caller. We have seen the directo IO failed due to this race. Some of the caller of releasepage() also expecting the buffer to be dropped when passed with GFP_KERNEL mask to the releasepage()->journal_try_to_free_buffers(). With this patch, if the caller is passing the __GFP_WAIT and __GFP_FS to indicating this call could wait, in case of try_to_free_buffers() failed, let's waiting for journal_commit_transaction() to finish commit the current committing transaction, then try to free those buffers again. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mingming Cao <cmm@us.ibm.com> Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: improve some code in rb tree part of dir.cShen Feng
- remove unnecessary code in free_rb_tree_fname - rename free_rb_tree_fname to ext3_htree_create_dir_info since it and ext3_htree_free_dir_info are a pair - replace kmalloc with kzalloc in ext3_htree_free_dir_info Signed-off-by: Shen Feng <shen@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: tidy up revoke cache initialisation and destructionDuane Griffin
Make revocation cache destruction safe to call if initialisation fails partially or entirely. This allows it to be used to cleanup in the case of initialisation failure, simplifying that code slightly. Signed-off-by: Duane Griffin <duaneg@dghda.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: eliminate duplicated code in revocation table init/destroy functionsDuane Griffin
The revocation table initialisation/destruction code is repeated for each of the two revocation tables stored in the journal. Refactoring the duplicated code into functions is tidier, simplifies the logic in initialisation in particular, and slightly reduces the code size. There should not be any functional change. Signed-off-by: Duane Griffin <duaneg@dghda.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25jbd: replace potentially false assertion with if blockDuane Griffin
If an error occurs during jbd cache initialisation it is possible for the journal_head_cache to be NULL when journal_destroy_journal_head_cache is called. Replace the J_ASSERT with an if block to handle the situation correctly. Note that even with this fix things will break badly if jbd is statically compiled in and cache initialisation fails. Signed-off-by: Duane Griffin <duaneg@dghda.com Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: correct mount option parsing to detect when quota options can be changedJan Kara
We should not allow user to change quota mount options when quota is just suspended. I would make mount options and internal quota state inconsistent. Also we should not allow user to change quota format when quota is turned on. On the other hand we can just silently ignore when some option is set to the value it already has (mount does this on remount). Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: fix typos in messages and comments (journalled -> journaled)Jan Kara
Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext3: fix synchronization of quota files in journal=data modeJan Kara
In journal=data mode, it is not enough to do write_inode_now as done in vfs_quota_on() to write all data to their final location (which is needed for quota_read to work correctly). Calling journal_flush() does its job. Reported-by: Nick <gentuu@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25ext2: remove double definitions of xattr macrosShen Feng
remove the definitions of macros: XATTR_TRUSTED_PREFIX XATTR_USER_PREFIX since they are defined in linux/xattr.h Signed-off-by: Shen Feng <shen@cn.fujitsu.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25minix: remove !NO_TRUNCATE codeAdrian Bunk
This patch removes the !NO_TRUNCATE code that anyway required a manual editing of the code for being used. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25exec: remove some includesHugh Dickins
fs/exec.c used to need mman.h pagemap.h swap.h and rmap.h when it did mm-ish stuff in install_arg_page(); but no need for them after 2.6.22. [akpm@linux-foundation.org: unbreak arm] Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fs: ldm.[ch] use get_unaligned_* helpersHarvey Harrison
Replace the private BE16/BE32/BE64 macros with direct calls to get_unaligned_be16/32/64. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6David Woodhouse
2008-07-25ELF loader support for auxvec base platform stringNathan Lynch
Some IBM POWER-based platforms have the ability to run in a mode which mostly appears to the OS as a different processor from the actual hardware. For example, a Power6 system may appear to be a Power5+, which makes the AT_PLATFORM value "power5+". This means that programs are restricted to the ISA supported by Power5+; Power6-specific instructions are treated as illegal. However, some applications (virtual machines, optimized libraries) can benefit from knowledge of the underlying CPU model. A new aux vector entry, AT_BASE_PLATFORM, will denote the actual hardware. For example, on a Power6 system in Power5+ compatibility mode, AT_PLATFORM will be "power5+" and AT_BASE_PLATFORM will be "power6". The idea is that AT_PLATFORM indicates the instruction set supported, while AT_BASE_PLATFORM indicates the underlying microarchitecture. If the architecture has defined ELF_BASE_PLATFORM, copy that value to the user stack in the same manner as ELF_PLATFORM. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-24fix fs/nfs/nfsroot.c compilationAdrian Bunk
This fixes the following compile error caused by commit f9247273cb69ba101877e946d2d83044409cc8c5 ("UFS: add const to parser token table"): CC fs/nfs/nfsroot.o /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/nfs/nfsroot.c:130: error: tokens causes a section type conflict make[3]: *** [fs/nfs/nfsroot.o] Error 1 Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24When verifying the decoded header before decoding the object identifierChris Wright
(expecting a SPNEGO pseudo-mechanism oid), the test to verify it is a primitive encoding is compared against the asn1 class. Primitive is not a class. This brings check in line with similar check for krb/ntlmssp oid. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-07-24UFS: add const to parser token tableSteven Whitehouse
This patch adds a "const" to the parser token table. I've done an allmodconfig build to see if this produces any warnings/failures and the patch includes a fix for the only warning that was produced. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Alexander Viro <aviro@redhat.com> Acked-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: remove unused ioctlsIan Kent
The ioctls AUTOFS_IOC_TOGGLEREGHOST and AUTOFS_IOC_ASKREGHOST were added several years ago but what they were intended for has never been implemented (as far as I'm aware noone uses them) so remove them. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: reorganize expire pending wait function callsIan Kent
This patch re-orgnirzes the checking for and waiting on active expires and elininates redundant checks. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix direct mount pending expire race - correctionIan Kent
Appologies, somehow I seem to have sent an out dated version of this patch. Here is an additional patch that brings the patch up to date. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix direct mount pending expire raceIan Kent
For direct and offset type mounts that are covered by another mount we cannot check the AUTOFS_INF_EXPIRING flag during a path walk which leads to lookups walking into an expiring mount while it is being expired. For example, for the direct multi-mount map entry with a couple of offsets: /race/mm1 / <server1>:/<path1> /om1 <server2>:/<path2> /om2 <server1>:/<path3> an autofs trigger mount is mounted on /race/mm1 and when accessed it is over mounted and trigger mounts made for /race/mm1/om1 and /race/mm1/om2. So it isn't possible for path walks to see the expiring flag at all and they happily walk into the file system while it is expiring. When expiring these mounts follow_down() must stop at the autofs mount and all processes must block in the ->follow_link() method (except the daemon) until the expire is complete. This is done by decrementing the d_mounted field of the autofs trigger mount root dentry until the expire is completed. In ->follow_link() all processes wait on the expire and the mount following is completed for the daemon until the expire is complete. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix indirect mount pending expire raceIan Kent
The selection of a dentry for expiration and the setting of the AUTOFS_INF_EXPIRING flag isn't done atomically which can lead to lookups walking into an expiring mount. What happens is that an expire is initiated by the daemon and a dentry is selected for expire but, since there is no lock held between the selection and setting of the expiring flag, a process may find the flag clear and continue walking into the mount tree at the same time the daemon attempts the expire it. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix pending checksIan Kent
There are two cases for which a dentry that has a pending mount request does not wait for completion. One is via autofs4_revalidate() and the other via autofs4_follow_link(). In revalidate, after the mount point directory is created, but before the mount is done, the check in try_to_fill_dentry() can can fail to send the dentry to the wait queue since the dentry is positive and the lookup flags may contain only LOOKUP_FOLLOW. Although we don't trigger a mount for the LOOKUP_FOLLOW flag, if ther's one pending we might as well wait and use the mounted dentry for the lookup. In autofs4_follow_link() the dentry is not checked to see if it is pending so it may fail to call try_to_fill_dentry() and not wait for mount completion. A dentry that is pending must always be sent to the wait queue. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>