aboutsummaryrefslogtreecommitdiff
path: root/include/acpi/acpi_drivers.h
AgeCommit message (Collapse)Author
2008-11-11Merge branch 'processor-256' into releaseLen Brown
2008-11-07ACPI: add driver component definitions to sysfs debug_layersBjorn Helgaas
/sys/module/acpi/parameters/debug_layers used to contain only the debug layers defined by the ACPI CA. This patch adds the additional layer definitions for ACPI drivers. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07ACPI: fix conflicting component definitionsBjorn Helgaas
Some of the component definitions that were previous scattered around the drivers conflict with each other. That doesn't hurt anything except that setting one bit in the debug_layer mask would turn on debugging in two different modules. This patch fixes the conflicts. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.hBjorn Helgaas
Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: Disambiguate processor declaration typeMyron Stowe
Declaring processors in ACPI namespace can be done using either a "Processor" definition or a "Device" definition (see section 8.4 - Declaring Processors; "Advanced Configuration and Power Interface Specification", Revision 3.0b). Currently the two processor declaration types are conflated. This patch disambiguates the processor declaration's definition type enabling subsequent code to behave uniquely based explicitly on the declaration's type. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove CONFIG_ACPI_ECBjorn Helgaas
Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06ACPI: remove CONFIG_ACPI_POWERBjorn Helgaas
Remove CONFIG_ACPI_POWER. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(), acpi_power_transition(), etc) are called unconditionally from the ACPI core, so we already depend on it always being present. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'ec' into testLen Brown
2008-10-22Merge branch 'dock' into testLen Brown
Conflicts: drivers/acpi/osl.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22ACPI: Add "acpi.power_nocheck=1" to disable power state check in power ↵Zhao Yakui
transition Maybe the incorrect power state is returned on the bogus bios, which is different with the real power state. For example: the bios returns D0 state and the real power state is D3. OS expects to set the device to D0 state. In such case if OS uses the power state returned by the BIOS and checks the device power state very strictly in power transition, the device can't be transited to the correct power state. So the boot option of "acpi.power_nocheck=1" is added to avoid checking the device power in the course of device power transition. http://bugzilla.kernel.org/show_bug.cgi?id=8049 http://bugzilla.kernel.org/show_bug.cgi?id=11000 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11ACPI: Enable EC device immediately after ACPI full initializationZhao Yakui
when there is no ECDT table and no _INI object for EC device, it will be enabled before scanning ACPI device. But it is too late after the following the commit is merged. >commit 7752d5cfe3d11ca0bb9c673ec38bd78ba6578f8e > Author: Robert Hancock <hancockr@shaw.ca> > Date: Fri Feb 15 01:27:20 2008 -0800 >x86: validate against acpi motherboard resources After the above commit is merged, OS will check whether MCFG area is reserved in ACPI motherboard resources by calling the function of acpi_get_devices when there exists MCFG table. In the acpi_get_devices the _STA object will be evaluated to check the status of the ACPI device. On some broken BIOS the MYEC object of EC device is initialized as one, which indicates that EC operation region is already accessible before enabling EC device.So on these broken BIOS the EC operation region will be accessed in course of evaluating the _STA object before enabling EC device, which causes that OS will print the following warning messages: >ACPI Error (evregion-0315): No handler for Region [EC__] (ffff88007f8145e8) [EmbeddedControl] [20080609] >ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20080321] >ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG. EC__.BAT1._STA] (Node ffff81013fc17a00), AE_NOT_EXIST >ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.SBRG.EC__.BAT1. _STA] (Node ffff81013fc17a00), AE_NOT_EXIST Although the above warning message is harmless, it looks confusing. So it is necessary to enable EC device as early as possible.Maybe it is appropriate to enable it immediately after ACPI full initialization. http://bugzilla.kernel.org/show_bug.cgi?id=11255 http://bugzilla.kernel.org/show_bug.cgi?id=11374 http://bugzilla.kernel.org/show_bug.cgi?id=11660 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-23dock: introduce .uevent for devices in dock, eg libataShaohua Li
dock's uevent reported itself, not ata. It might be difficult to find an ata device just according to a dock. This patch introduces docking ops for each device in a dock. when docking, dock driver can send device specific uevent. This should help dock station too (not just bay) Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-07ACPI: Introduce acpi_device_sleep_wake functionRafael J. Wysocki
The currect ACPI code attempts to execute _PSW at three different places and in one of them only it tries to execute _DSW before _PSW, which is inconsistent with the other two cases. Move the execution of _DSW and _PSW into a separate function called acpi_device_sleep_wake() and call it wherever appropriate instead of executing _DSW and/or _PSW directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-02-07Merge branches 'release' and 'fluff' into releaseLen Brown
Conflicts: drivers/acpi/scan.c include/linux/acpi.h Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07ACPI: misc cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the following needlessly global code static: - drivers/acpi/bay.c:dev_attr_eject - drivers/acpi/bay.c:dev_attr_present - drivers/acpi/dock.c:dev_attr_docked - drivers/acpi/dock.c:dev_attr_flags - drivers/acpi/dock.c:dev_attr_uid - drivers/acpi/dock.c:dev_attr_undock - drivers/acpi/pci_bind.c:acpi_pci_unbind() - drivers/acpi/pci_link.c:acpi_link_lock - drivers/acpi/sbs.c:acpi_sbs_callback() - drivers/acpi/sbshc.c:acpi_smbus_transaction() - drivers/acpi/sleep/main.c:acpi_sleep_prepare() - #if 0 the following unused global functions: - drivers/acpi/numa.c:acpi_unmap_pxm_to_node() - remove the following unused EXPORT_SYMBOL's: - acpi_register_gsi - acpi_unregister_gsi - acpi_strict - acpi_bus_receive_event - register_acpi_bus_type - unregister_acpi_bus_type - acpi_os_printf - acpi_os_sleep - acpi_os_stall - acpi_os_read_pci_configuration - acpi_os_create_semaphore - acpi_os_delete_semaphore - acpi_os_wait_semaphore - acpi_os_signal_semaphore - acpi_os_signal - acpi_pci_irq_enable - acpi_get_pxm Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-12-08ACPI: Add autoload info to dock driverFrank Seidel
References: https://bugzilla.novell.com/show_bug.cgi?id=302482 Signed-off-by: Thomas Renninger <trenn@novell.com> Signed-off-by: Kay Sievers <kasievers@novell.com> Signed-off-by: Frank Seidel <fseidel@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-25ACPI: CONFIG_ACPI_SLEEP=n power off regression in 2.6.23-rc8 (NOT in rc7)Alexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-29ACPI: restore CONFIG_ACPI_SLEEPLen Brown
Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the new CONFIG_PM_SLEEP option. Signed-off-by: Len Brown <len.brown@intel.com> [ Modified to work with the PM config setup changes. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29Introduce CONFIG_SUSPEND for suspend-to-Ram and standbyRafael J. Wysocki
Introduce CONFIG_SUSPEND representing the ability to enter system sleep states, such as the ACPI S3 state, and allow the user to choose SUSPEND and HIBERNATION independently of each other. Make HOTPLUG_CPU be selected automatically if SUSPEND or HIBERNATION has been chosen and the kernel is intended for SMP systems. Also, introduce CONFIG_PM_SLEEP which is automatically selected if CONFIG_SUSPEND or CONFIG_HIBERNATION is set and use it to select the code needed for both suspend and hibernation. The top-level power management headers and the ACPI code related to suspend and hibernation are modified to use the new definitions (the changes in drivers/acpi/sleep/main.c are, mostly, moving code to reduce the number of ifdefs). There are many other files in which CONFIG_PM can be replaced with CONFIG_PM_SLEEP or even with CONFIG_SUSPEND, but they can be updated in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25Pull auto-load-modules into release branchLen Brown
2007-07-25ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from sourceLen Brown
As it was a synonym for (CONFIG_ACPI && CONFIG_X86), the ifdefs for it were more clutter than they were worth. For ia64, just add a few stubs in anticipation of future S3 or S4 support. Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-23ACPI: autoload modules - ACPICA modificationsThomas Renninger
Define standardized HIDs - Rename current acpi_device_id to acpica_device_id Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09ACPICA: LindentLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16Pull bugzilla-7887 into release branchLen Brown
2007-02-16Pull remove-hotkey into release branchLen Brown
2007-02-16ACPI: hotkey: remove driver, per feature-removal-schedule.txtLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-10ACPI: invoke acpi_sleep_init() earlierAlexey Starikovskiy
late_initcall() is too late for acpi_sleep_init(). Call it directly from acpi_init code. http://bugzilla.kernel.org/show_bug.cgi?id=7887 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Vladimir Lebedev <vladimir.p.lebedev@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-09ACPI: bay: fix build warningAndrew Morton
drivers/acpi/bay.c: In function 'bay_add': drivers/acpi/bay.c:310: warning: statement with no effect Fix it by rewriting those macros in C. Much nicer. Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-03Pull sysfs into test branchLen Brown
Conflicts: Documentation/feature-removal-schedule.txt include/acpi/acpi_drivers.h Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-02ACPICA: Allow processor to be declared with the Device() instead of Processor()Alexey Starikovskiy
Allow processor to be declered with the Device(), such as: Device(CPU1234) { Name(_HID, "ACPI007") Name(_UID, 1234) } Signed-off-by: Len Brown <len.brown@intel.com>
2007-01-05ACPI: use more understandable bus_id for ACPI devicesZhang Rui
Some of the ACPI devices use the internal fake hids which are exposed to userspace as devces' bus_id after sysfs conversion. To make it more friendly, we convert them to more understandable strings. For those devices w/o PNPids, we use "device:instance_no" as the bus_id instead of "PNPIDNON:instance_no". Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-21ACPI: fix Supermicro X7DB8+ Boot regressionRui Zhang
http://bugzilla.kernel.org/show_bug.cgi?id=7695 Originally we converted bind/unbind to use a new pci bridge driver. The driver will add/remove _PRT, so we can eventually remove .bind/.unbind methods. But we found that some of the _ADR-Based devices don't have _PRT, i.e. they are not managed by the new ACPI PCI bridge driver. So that .bind method is not called for some _ADR-Based devices, which leads to a failure. Now we make ACPI PCI Root Bridge Driver scan and binds all _ADR-Based devices once the driver is loaded, in the .add method of ACPI PCI Root Bridge driver. Extra code path for calling .bind/.unbind when _ADR-Based devices are hot added/removed is also added. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-15ACPI: Set fake hid for non-PNPID ACPI devicesZhang Rui
We do this mainly because: 1. hid is used to match ACPI devices and drivers. .match method which is incompatible to driver model can be deleted from acpi_driver.ops then. 2. As the .uevent method mark ACPI drivers by PNPID, fake hid is set to non-PNPID devices so that udev script can load the right ACPI driver by looking for "HWID = " or "COMPTID = ". Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-09Revert "Revert "ACPI: dock driver""Len Brown
This reverts 953969ddf5b049361ed1e8471cc43dc4134d2a6f commit.
2006-07-09Revert "ACPI: dock driver"Linus Torvalds
This reverts commit a5e1b94008f2a96abf4a0c0371a55a56b320c13e. Adrian Bunk points out that it has build errors, and apparently no maintenance. Throw it out. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28ACPI: dock driverKristen Accardi
Create a driver which lives in the acpi subsystem to handle dock events. This driver is not an "ACPI" driver, because acpi drivers require that the object be present when the driver is loaded. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-10[ACPI] ACPICA 20050930Bob Moore
Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25[ACPI] delete CONFIG_ACPI_PCILen Brown
Delete the ability to build an ACPI kernel that does not include PCI support. When such a machine is created and it requires a tuned kernel, send a patch. http://bugzilla.kernel.org/show_bug.cgi?id=1364 Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05[ACPI] Lindent all ACPI filesLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-29/home/lenb/src/to-linus branch 'acpi-2.6.12'Len Brown
2005-07-29[ACPI] suspend/resume ACPI PCI Interrupt LinksDavid Shaohua Li
Add reference count and disable ACPI PCI Interrupt Link when no device still uses it. Warn when drivers have not released Link at suspend time. http://bugzilla.kernel.org/show_bug.cgi?id=3469 Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12[ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[ACPI] generic Hot Key supportLuming Yu
See Documentation/acpi-hotkey.txt Use cmdline "acpi_specific_hotkey" to enable legacy platform specific drivers. http://bugzilla.kernel.org/show_bug.cgi?id=3887 Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-27[PATCH] acpi bridge hotadd: Export the interface to get PCI id for an ACPI ↵Rajesh Shah
handle Export an acpi interface to get PCI domain/bus/devfn information from the corresponding namespace handle. Used by acpiphp code to transpate the device handle of the hot-plugged root bridge to the corresponding pci location information. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 22:42:45 +0000