aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm
AgeCommit message (Collapse)Author
2008-02-08misc: removal of final callers using fastcallHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08aout: suppress A.OUT library support if !CONFIG_ARCH_SUPPORTS_AOUTDavid Howells
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set. Not all architectures support the A.OUT binfmt, so the ELF binfmt should not be permitted to go looking for A.OUT libraries to load in such a case. Not only that, but under such conditions A.OUT core dumps are not produced either. To make this work, this patch also does the following: (1) Makes the existence of the contents of linux/a.out.h contingent on CONFIG_ARCH_SUPPORTS_AOUT. (2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT core dumping code. (3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This is then included only where needed. This means that this bit of arch code will be stored in the appropriate A.OUT binfmt module rather than the core kernel. (4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not needed) and FRV. This patch depends on the previous patch to move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. [jdike@addtoit.com: uml: re-remove accidentally restored code] Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08aout: move STACK_TOP[_MAX] to asm/processor.hDavid Howells
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits) Input: i8042 - non-x86 build fix Input: pxa27x_keypad - also enable on PXA3xx Input: pxa27x_keypad - add debounce_interval to the keypad platform data Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ Input: pxa27x_keypad - enable rotary encoders and direct keys Input: pxa27x_keypad - introduce pxa27x_keypad_config() Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys Input: pxa27x_keypad - remove pin configuration from the driver Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard) Input: constify function pointer tables (seq_operations) Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list Input: i8042 - enable DMI quirks on x86-64 Input: i8042 - add Dritek quirk for Acer Aspire 9110 Input: add input event to APM event bridge Input: mousedev - use BIT_MASK instead of BIT Input: remove duplicate includes Input: remove cdev from input_dev structure Input: remove duplicated headers in drivers/char/keyboard.c Input: i8042 - add Dritek keyboard extension quirk Input: add Tosa keyboard driver ...
2008-02-07Add cmpxchg_local to armMathieu Desnoyers
Use the new generic cmpxchg_local (disables interrupt). Also use the generic cmpxchg as fallback if SMP is not set. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Sanitize the type of struct user.u_ar0H. Peter Anvin
struct user.u_ar0 is defined to contain a pointer offset on all architectures in which it is defined (all architectures which define an a.out format except SPARC.) However, it has a pointer type in the headers, which is pointless -- <asm/user.h> is not exported to userspace, and it just makes the code messy. Redefine the field as "unsigned long" (which is the same size as a pointer on all Linux architectures) and change the setting code to user offsetof() instead of hand-coded arithmetic. Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Håvard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Cleanup asm/{elf,page,user}.h: #ifdef __KERNEL__ is no longer neededKirill A. Shutemov
asm/elf.h, asm/page.h and asm/user.h don't export to userspace now, so we can drop #ifdef __KERNEL__ for them. [k.shutemov@gmail.com: remove #ifdef __KERNEL_] Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Reviewed-by: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Merge branch 'async-tx-for-linus' of ↵Linus Torvalds
git://lost.foo-projects.org/~dwillia2/git/iop into fix * 'async-tx-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: async_tx: allow architecture specific async_tx_find_channel implementations async_tx: replace 'int_en' with operation preparation flags async_tx: kill tx_set_src and tx_set_dest methods async_tx: kill ASYNC_TX_ASSUME_COHERENT iop-adma: use LIST_HEAD instead of LIST_HEAD_INIT async_tx: use LIST_HEAD instead of LIST_HEAD_INIT async_tx: fix compile breakage, mark do_async_xor __always_inline
2008-02-06FB/S3C2412: add S3C2412 support to S3C2410 fb driverBen Dooks
Add support for the S3C2412 to the S3C2410 frame buffer driver by ensuring that any moved registers can be dealt with. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06spi: s3c drivers shouldn't care about spi_board_infoDavid Brownell
The two S3C SPI master drivers got merged without much review, so I just noticed that they're doing something that the SPI core code is responsible for, rather than any adapter driver: they try to register SPI devices. This removes that support from those drivers so they act normally. Interestingly, none of the current boards are affected. So it's a net code shrink with no loss of functionality. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06async_tx: replace 'int_en' with operation preparation flagsDan Williams
Pass a full set of flags to drivers' per-operation 'prep' routines. Currently the only flag passed is DMA_PREP_INTERRUPT. The expectation is that arch-specific async_tx_find_channel() implementations can exploit this capability to find the best channel for an operation. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Reviewed-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-05add mm argument to pte/pmd/pud/pgd_freeBenjamin Herrenschmidt
(with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05gpiolib support for the PXA architecturePhilipp Zabel
This adds gpiolib support for the PXA architecture: - move all GPIO API functions from generic.c into gpio.c - convert the gpio_get/set_value macros into inline functions This makes it easier to hook up GPIOs provided by external chips like ASICs and CPLDs. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Minor ARM fixup from David Brownell folded into this ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c [ARM] 4820/1: RealView: Select the timer IRQ at run-time [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms [ARM] 4818/1: RealView: Add core-tile detection [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h [ARM] 4815/1: RealView: Add clockevents suport for the local timers [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore [ARM] 4813/1: Add SMP helper functions for clockevents support [ARM] 4812/1: RealView: clockevents support for the RealView platforms [ARM] 4811/1: RealView: clocksource support for the RealView platforms [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags [ARM] 4798/1: pcm027: fix missing header file [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1 [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h [ARM] pxa: introduce sysdev for pxa3xx static memory controller [ARM] pxa: add preliminary suspend/resume code for pxa3xx [ARM] pxa: introduce sysdev for GPIO register saving/restoring [ARM] pxa: introduce sysdev for IRQ register saving/restoring ...
2008-02-04Merge branches 'at91', 'ixp', 'master', 'misc', 'pxa' and 'realview' into develRussell King
* at91: [ARM] 4802/1: Fix typo and remove vague comment [ARM] 4660/3: at91: allow selecting UART for early kernel messages [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work * ixp: [ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c [ARM] 4808/2: ixp4xx: Merge nas100d-power.c into nas100d-setup.c [ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver [ARM] 4715/2: Ethernet support for IXDP425 boards [ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN drivers [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features [ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bits [ARM] 4774/2: ixp4xx: Register dsmg600 rtc i2c_board_info [ARM] 4773/2: ixp4xx: Register nas100d rtc i2c_board_info [ARM] 4772/2: ixp4xx: Register nslu2 rtc i2c_board_info [ARM] 4769/2: ixp4xx: Button updates for the dsmg600 board [ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d board [ARM] 4767/2: ixp4xx: Add bitops.h include to io.h [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards * master: [ARM] 4810/1: - Fix 'section mismatch' building warnings [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking [ARM] 21285 serial: fix build error * misc: [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags * pxa: [ARM] 4798/1: pcm027: fix missing header file [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1 [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h [ARM] pxa: introduce sysdev for pxa3xx static memory controller [ARM] pxa: add preliminary suspend/resume code for pxa3xx [ARM] pxa: introduce sysdev for GPIO register saving/restoring [ARM] pxa: introduce sysdev for IRQ register saving/restoring [ARM] pxa: fix the warning of undeclared "struct pxaohci_platform_data" [ARM] pxa: change set_kset_name() to direct name assignment for MFP sysclass * realview: [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c [ARM] 4820/1: RealView: Select the timer IRQ at run-time [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms [ARM] 4818/1: RealView: Add core-tile detection [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h [ARM] 4815/1: RealView: Add clockevents suport for the local timers [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore [ARM] 4813/1: Add SMP helper functions for clockevents support [ARM] 4812/1: RealView: clockevents support for the RealView platforms [ARM] 4811/1: RealView: clocksource support for the RealView platforms
2008-02-04[ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration optionCatalin Marinas
This patch changes the REALVIEW_MPCORE configuration option to REALVIEW_EB_ARM11MP since this is only specific to RealView/EB. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platformsCatalin Marinas
This patch modifies the get_irqnr_preamble macro to work with multiple platforms at run-time by reading the address of the GIC controller from the gic_cpu_base_addr variable. This variable is defined in core.c and intialised in realview_eb.c (gic_init_irq). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4818/1: RealView: Add core-tile detectionCatalin Marinas
This patch adds the core-tile detection and only enables devices if the corresponding tile is present. It currently detects the ARM11MPCore via the core_tile_eb11mp() macro. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.hCatalin Marinas
This patch moves the platform specific definitions from platform.h into the board-eb.h file. It drops the INT_* definitions as they are no longer used in irqs.h (moved to board-eb.h). It renames REALVIEW_* macros to REALVIEW_EB_* or REALVIEW_EB11MP_* to distinguish between standard EB and EB + the ARM11MPCore tile. The platform.h file contains common definitions to the RealView platforms and it is only directly included in board-*.h files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4815/1: RealView: Add clockevents suport for the local timersCatalin Marinas
This patch registers the local timers on ARM11MPCore as clock event devices. The clock device can be set up as periodic or oneshot. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCoreCatalin Marinas
This patch adds dummy local timers for each CPU so that the board clock device is used to broadcast events to the other CPUs. The patch also adds the declaration for the dummy_timer_setup function (the equivalent of local_timer_setup when CONFIG_LOCAL_TIMERS is not set). Due to the way clockevents work, the dummy timer on the first CPU has to be registered before the board timer. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4813/1: Add SMP helper functions for clockevents supportCatalin Marinas
This patch adds the smp_call_function_single and smp_timer_broadcast functions and modifies ipi_timer to call the platform-specific function local_timer_interrupt. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4736/1: Export atags to userspace and allow kexec to use customised atagsRichard Purdie
Currently, the atags used by kexec are fixed to the ones originally used to boot the kernel. This is less than ideal as changing the commandline, initrd and other options would be a useful feature. This patch exports the atags used for the current kernel to userspace through an "atags" file in procfs. The presence of the file is controlled by its own Kconfig option and cleans up several ifdef blocks into a separate file. The tags for the new kernel are assumed to be at a fixed location before the kernel image itself. The location of the tags used to boot the original kernel is unimportant and no longer saved. Based on a patch from Uli Luckas <u.luckas@road.de> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Uli Luckas <u.luckas@road.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] pxa: add preliminary suspend/resume code for pxa3xxeric miao
1. clear RDH bit after resuming back from D3, otherwise, the multi function pins will retain the low power state 2. save/restore essential system registers Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4802/1: Fix typo and remove vague commentMarc Pignat
Fix typo and remove vague comment Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4660/3: at91: allow selecting UART for early kernel messagesGuennadi Liakhovetski
Currently early kernel messages, i.e., those from uncompression, go to the debugging UART. And if it is enabled in the platform configuration, but not initialized by the bootloader, the machine hangs, waiting for UART status change. Besides, having those messages on another UART - typically the console UART - may be preferrable. This patch allows selecting the UART in kernel configuration. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.cRod Whitby
There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file, removing superfluous header includes and removing superfluous constants from the machine header file. -- Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN driversKrzysztof Halasa
Adds platform structs and #defines required by drivers for IXP4xx built-in Ethernet and WAN (sync serial) ports. The actual drivers will reside in drivers/net/arm and drivers/net/wan and will be submitted separately. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE featuresKrzysztof Halasa
This patch adds drivers for IXP4xx hardware Queue Manager and for Network Processor Engines. Requires patch #4712 (reading/writing CPU feature (aka fuse) bits). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bitsKrzysztof Halasa
Adds functions to read and write IXP4xx "feature" (aka "fuse") bits, containing information about available/enabled CPU features. The uncompress.h included by boot/compressed/misc.c resides in a different space than rest of the kernel and thus can't use asm/hardware.h (including asm/arch/cpu.h - which, in turn, may use EXPORTed symbol "processor_id"). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4769/2: ixp4xx: Button updates for the dsmg600 boardRod Whitby
* Remove the superfluous declaration of ctrl_alt_del(). * Convert GPIO and IRQ handling to use the <asm/gpio.h> api. * Perform the reset on the release of the power button, so that NAS devices which have been set to auto-power-on (by solder bridging the power button) do not continuously power cycle. * Remove all superflous constants from dsmg600.h Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d boardRod Whitby
* Convert GPIO and IRQ handling to use the <asm/gpio.h> api. * Perform the reset only after the power button has been held down for at least two seconds. Do the reset on the release of the power button, so that NAS devices which have been set to auto-power-on (by solder bridging the power button) do not continuously power cycle. * Remove all superflous constants from nas100d.h * Add LED constants to nas100d.h while we're there. * Update the board LED setup code to use those constants. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4767/2: ixp4xx: Add bitops.h include to io.hRod Whitby
Add include of <linux/bitops.h> to io.h to solve compilations errors in files such as drivers/w1/w1_io.c caused by the ixp4xx version of io.h using the BIT() macro without including <linux/bitops.h> first. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-03include/asm-arm/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03fix typo 'the same the\>'Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-01USB: at91_udc uses generic GPIO calls; minor cleanupDavid Brownell
Various small at91_udc cleanups: - Use generic GPIO calls, not older platform-specific ones - Use gpio_request()/gpio_free() - Use VERBOSE_DEBUG convention, not older VERBOSE - Fix sparse complaint about parameter type (changed to gfp_t) - Add missing newline to some rarely-seen debug messages - Fix some old cleanup bugs on probe() fault paths Also add a mechanism whereby rm9200 gpios can drive the D+ pullup through an inverting transistor, based on a patch from Steve Birtles. Most UDC drivers supporting a GPIO based pullup should probably have such an option, but testing it requries such a board in hand! Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Steve Birtles <arm_kernel_development@micromark.net.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: gadget: pxa2xx_udc supports inverted vbusDmitry Baryshkov
Some boards (like e.g. Tosa) invert the VBUS-detection signal: it's low when a host is supplying VBUS, and high otherwise. Allow specifying whether gpio_vbus value is inverted. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-31[NET]: Introducing socket mark socket option.Laszlo Attila Toth
A userspace program may wish to set the mark for each packets its send without using the netfilter MARK target. Changing the mark can be used for mark based routing without netfilter or for packet filtering. It requires CAP_NET_ADMIN capability. Signed-off-by: Laszlo Attila Toth <panther@balabit.hu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31Input: pxa27x_keypad - add debounce_interval to the keypad platform dataEric Miao
Currently, only one debounce_interval is introduced for both direct and matrix keys. This is true in most cases, although the keypad controller supports different debounce for direct/matrix keys. Some platforms do require this to be tuned, instead of the default reset value of 100ms. Rotary encoder will always use zero debounce time for now to achieve certain sensitivity. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - enable rotary encoders and direct keysEric Miao
1. Rotary encoder events can be configured either as relative events as the legacy code does or as any specified key code, this is useful on some platform which uses the rotary keys as KEY_{UP/DOWN/LEFT/RIGHT} 2. Add support for direct keys, the corresponding keycodes for each direct key can now be specified within the platform data 3. Remove the direct/rotary key detection code from the IRQ handler to dedicated functions to improve readability Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce pxa27x_keypad_config()Eric Miao
Introduce pxa27x_keypad_config() for keypad registers configuration and remove the reg_kpc, reg_kprec from platform data structure so that configurations of keypad registers can be centralized to a single function. It can also be re-used when resuming. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce driver structure and use KEY() to define ↵Eric Miao
matrix keys 1. Introduce the "struct pxa27x_keypad" structure for driver specific information, such as "struct clk", generated matrix key codes and so on 2. Use KEY() macro to define matrix keys, instead of original 8x8 map this makes definition easier with keypad where keys are sparse 3. Keep a generated array in "struct pxa27x_keypad" for fast lookup 4. Separate the matrix scan into a dedicated function for readability and report only those keys whose state has been changed, instead of report all states 5. Make use of KPAS to decide the faster path if only one key has been detected Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - remove pin configuration from the driverEric Miao
The pin configurations will slowly be moved to the board specific code at initialization thus to make the driver more generic. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)Eric Miao
The controller should really be called keypad, and also align the naming of functions and structures to use "pxa27x_keypad" as prefix, instead of "pxakbd". Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-28ext4: Add ext4_find_next_bit()Aneesh Kumar K.V
This function is used by the ext4 multi block allocator patches. Also add generic_find_next_le_bit Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branch 'orion' into develRussell King
* orion: (26 commits) [ARM] Orion: implement power-off method for QNAP TS-109/209 [ARM] Orion: add support for QNAP TS-109/TS-209 [ARM] Orion: I2C support [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries [I2C] Split mv643xx I2C platform support [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323 [ARM] Orion defconfig [ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323 [ARM] Orion: MV88F5181 support bits [ARM] Orion: Buffalo/Revogear Kurobox Pro support [ARM] OrionNAS RD board support [ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board [ARM] Orion: common platform setup for Gigabit Ethernet port [ARM] Orion: platform device registration for UART, USB and NAND [ARM] Orion: system timer support [ARM] Orion edge GPIO IRQ support [ARM] Orion: IRQ support [ARM] Orion: provide GPIO method for enabling hardware assisted blinking [ARM] Orion: GPIO support [ARM] Orion: programable address map support ... Conflicts: arch/arm/Kconfig arch/arm/Makefile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', ↵Russell King
's3c2410', 'sa1100' and 'vfp' into devel * at91: (24 commits) [ARM] 4615/4: sam926[13]ek buttons updated [ARM] 4765/1: [AT91] AT91CAP9A-DK board support [ARM] 4764/1: [AT91] AT91CAP9 core support [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation [ARM] 4761/1: [AT91] Board-support for NEW_LEDs [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 [ARM] 4759/1: [AT91] Buttons on CSB300 [ARM] 4758/1: [AT91] LEDs [ARM] 4757/1: [AT91] UART initialization [ARM] 4756/1: [AT91] Makefile cleanup [ARM] 4755/1: [AT91] NAND update [ARM] 4754/1: [AT91] SSC library support [ARM] 4753/1: [AT91] Use DMA_BIT_MASK [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY [ARM] 4646/1: AT91: configurable HZ, default to 128 [ARM] 4688/1: at91: speed-up irq processing [ARM] 4657/1: AT91: Header definition update ... * ep93xx: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups [ARM] 4668/1: ep93xx: implement new GPIO API * iop: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device [ARM] 4708/1: iop: update defconfigs for 2.6.24 * kprobes: ARM kprobes: let's enable it ARM kprobes: special hook for the kprobes breakpoint handler ARM kprobes: prevent some functions involved with kprobes from being probed ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack ARM kprobes: add the kprobes hook to the page fault handler ARM kprobes: core code ARM kprobes: instruction single-stepping support * ks8695: [ARM] 4603/1: KS8695: debugfs interface to view pin state [ARM] 4601/1: KS8695: PCI support * misc: [ARM] remove duplicate includes [ARM] CONFIG_DEBUG_STACK_USAGE [ARM] 4689/1: small comment wrap fix [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS [SERIAL] 21285: Report baud rate back via termios [ARM] Remove pointless casts from void pointers, [ARM] Misc minor interrupt handler cleanups [ARM] Remove at91_lcdc.h [ARM] ARRAY_SIZE() cleanup [ARM] Update mach-types * msm: [ARM] msm: dma support for MSM7X00A [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) [ARM] msm: irq and timer support for ARCH_MSM7X00A [ARM] msm: core platform support for ARCH_MSM7X00A * s3c2410: (33 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ... * sa1100: [ARM] sa1100: add clock source support * vfp: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support [ARM] 4583/1: ARMv7: Add VFPv3 support [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping functionBen Dooks
Add the reverse of s3c2410_gpio_getirq to convert a IRQ number into a GPIO pin number. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 06:00:38 +0000