aboutsummaryrefslogtreecommitdiff
path: root/include/asm-avr32
AgeCommit message (Collapse)Author
2008-07-15atmel-mci: Driver for Atmel on-chip MMC controllersHaavard Skinnemoen
This is a driver for the MMC controller on the AP7000 chips from Atmel. It should in theory work on AT91 systems too with some tweaking, but since the DMA interface is quite different, it's not entirely clear if it's worth merging this with the at91_mci driver. This driver has been around for a while in BSPs and kernel sources provided by Atmel, but this particular version uses the generic DMA Engine framework (with the slave extensions) instead of an avr32-only DMA controller framework. This driver can also use PIO transfers when no DMA channels are available, and for transfers where using DMA may be difficult or impractical for some reason (e.g. the DMA setup overhead is usually not worth it for very short transfers, and badly aligned buffers or lengths are difficult to handle.) Currently, the driver only support PIO transfers. DMA support has been split out to a separate patch to hopefully make it easier to review. The driver has been tested using mmc-block and ext3fs on several SD, SDHC and MMC+ cards. Reads and writes work fine, with read transfer rates up to 3.5 MiB/s on fast cards with debugging disabled. The driver has also been tested using the mmc_test module on the same cards. All tests except 7, 9, 15 and 17 succeed. The first two are unsupported by all the cards I have, so I don't know if the driver handles this correctly. The last two fail because the hardware flags a Data CRC Error instead of a Data Timeout error. I'm not sure how to deal with that. Documentation for this controller can be found in many data sheets from Atmel, including the AT32AP7000 data sheet which can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (31 commits) avr32: Fix typo of IFSR in a comment in the PIO header file avr32: Power Management support ("standby" and "mem" modes) avr32: Add system device for the internal interrupt controller (intc) avr32: Add simple SRAM allocator avr32: Enable SDRAMC clock at startup rtc-at32ap700x: Enable wakeup macb: Basic suspend/resume support atmel_serial: Drain console TX shifter before suspending atmel_serial: Fix build on avr32 with CONFIG_PM enabled avr32: Use a quicklist for PTE allocation as well avr32: Use a quicklist for PGD allocation avr32: Cover the kernel page tables in the user PGDs avr32: Store virtual addresses in the PGD avr32: Remove useless zeroing of swapper_pg_dir at startup avr32: Clean up and optimize the TLB operations avr32: Rename at32ap.c -> pdc.c avr32: Move setup_platform() into chip-specific file avr32: Kill special exception handler sections avr32: Kill unneeded #include <asm/pgalloc.h> from asm/mmu_context.h avr32: Clean up time.c #includes ...
2008-07-10Fix name of Russell King in various commentsUwe Kleine-König
This patch was created by git grep -E -l 'Rus(el|s?e)l King' | xargs -r -t perl -p -i -e 's/Rus(el|s?e)l King/Russell King/g' Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Most-Definitely-Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-02avr32: Power Management support ("standby" and "mem" modes)Haavard Skinnemoen
Implement Standby support. In this mode, we'll suspend all drivers, put the SDRAM in self-refresh mode and switch off the HSB bus ("frozen" mode.) Implement Suspend-to-mem support. In this mode, we suspend all drivers, put the SDRAM into self-refresh mode and switch off all internal clocks except the 32 kHz oscillator ("stop" mode.) The lowest-level suspend code runs from a small portion of SRAM allocated at startup time. This gets rid of a small potential race with the SDRAM where we might try to enter self-refresh mode in the middle of an icache burst. We also relocate all interrupt and exception handlers to SRAM during the small window when we enter and exit the low-power modes. We don't need to do any special tricks to start and stop the PLL. The main clock is automatically gated by hardware until the PLL is stable. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02avr32: Add simple SRAM allocatorHaavard Skinnemoen
Add SRAM allocator for avr32, which is just a thin wrapper around genalloc. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02avr32: Use a quicklist for PTE allocation as wellHaavard Skinnemoen
Using a quicklist to allocate PTEs might be slightly faster than using the page allocator directly since we might avoid zeroing the page after each allocation. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02avr32: Use a quicklist for PGD allocationHaavard Skinnemoen
Use a quicklist to allocate process PGDs. This is expected to be slightly faster since we need to copy entries from swapper_pg_dir, which can stay around for pages on the PGD quick list. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02avr32: Cover the kernel page tables in the user PGDsHaavard Skinnemoen
Expand the per-process PGDs so that they cover the kernel virtual memory area as well. This simplifies the TLB miss handler fastpath since it doesn't have to check for kernel addresses anymore. If a TLB miss happens on a kernel address and a second-level page table can't be found, we check swapper_pg_dir and copy the PGD entry into the user PGD if it can be found there. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02avr32: Store virtual addresses in the PGDHaavard Skinnemoen
Instead of storing physical addresses along with page flags in the PGD, store virtual addresses and use NULL to indicate a not present second-level page table. A non-page-aligned page table indicates a bad PMD. This simplifies the TLB miss handler since it no longer has to check the Present bit and no longer has to convert the PGD entry from physical to virtual address. Instead, it has to check for a NULL entry, which is slightly cheaper than either. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02avr32: Clean up and optimize the TLB operationsHaavard Skinnemoen
This and the following patches aim to optimize the code dealing with page tables and TLB operations. Each patch reduces the time it takes to gzip a 16 MB file slightly, but I expect things like fork() and mmap() will improve somewhat more. This patch deals with the low-level TLB operations: * Remove unused _TLBEHI_I define * Use gcc builtins instead of inline assembly * Remove a few unnecessary pipeline flushes and nops * Introduce NR_TLB_ENTRIES define and use it instead of hardcoding it to 32 a few places throughout the code. * Use sysreg bitops instead of hardcoded shifts and masks * Make a few needlessly global functions static Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-28avr32: Move setup_platform() into chip-specific fileHaavard Skinnemoen
Combine at32_clock_init() and at32_portmux_init() into setup_platform() and remove setup_platform() from at32ap.c. No functional change since all setup_platform() ever did was call those two functions. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-06-27avr32: Kill unneeded #include <asm/pgalloc.h> from asm/mmu_context.hHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27avr32: Add PSIF platform devicesHans-Christian Egtvedt
This patch adds the PS/2 interface (PSIF) to the device code, split into two platform devices, one for each port. The function for adding the PSIF platform device is also added to the board header file. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27avr32: Add pin configuration choice to LCDC peripheralHans-Christian Egtvedt
This patch lets the board code choose which pin out to use for the LCD interface. On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it is vital to have the choice to select the alternative pinout since this pinout is routed to the external headers. Update ATSTK1002 and ATSTK1004 to use the new interface. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27avr32: Allow board to define oscillator ratesAlex
On our custom board we have other oscillator rates than on atngw100 and atstk100x. Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c. This patch moves them into board specific code. Signed-off-by: Alex Raimondi <raimondi@miromico.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27avr32: Provide PCI DMA mapping APIHaavard Skinnemoen
Some non-PCI drivers need the PCI variant of the DMA mapping API. Include <asm-generic/pci-dma-compat.h> to provide this through the non-PCI DMA mapping API. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-02avr32: types: use <asm-generic/int-*.h> for the avr32 architectureH. Peter Anvin
This modifies <asm-avr32/types.h> to use the <asm-generic/int-*.h> generic include files. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-29kernel: Move arches to use common unaligned accessHarvey Harrison
Unaligned access is ok for the following arches: cris, m68k, mn10300, powerpc, s390, x86 Arches that use the memmove implementation for native endian, and the byteshifting for the opposite endianness. h8300, m32r, xtensa Packed struct for native endian, byteshifting for other endian: alpha, blackfin, ia64, parisc, sparc, sparc64, mips, sh m86knommu is generic_be for Coldfire, otherwise unaligned access is ok. frv, arm chooses endianness based on compiler settings, uses the byteshifting versions. Remove the unaligned trap handler from frv as it is now unused. v850 is le, uses the byteshifting versions for both be and le. Remove the now unused asm-generic implementation. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28mm: introduce pte_special pte bitNick Piggin
s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19avr32: add include/asm-avr32/serial.hAdrian Bunk
On Mon, Apr 14, 2008 at 03:36:24PM +0100, Alan Cox wrote: > On Mon, 14 Apr 2008 17:17:21 +0300 > Adrian Bunk <bunk@kernel.org> wrote: > > > This patch fixes the following build error: > > > > <-- snip --> > > > > ... > > CC [M] drivers/serial/8250.o > > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/serial/8250.c:95:24: error: asm/serial.h: No such file or directory > > make[3]: *** [drivers/serial/8250.o] Error 1 > > > > <-- snip --> > > > > Signed-off-by: Adrian Bunk <bunk@kernel.org> > > > > --- > > 3cb4ef80d75e118ccfd44f7006aea3db54afb31c diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > > index b1bbaa0..b0e216d 100644 > > --- a/drivers/serial/Kconfig > > +++ b/drivers/serial/Kconfig > > @@ -11,7 +11,7 @@ menu "Serial drivers" > > # The new 8250/16550 serial drivers > > config SERIAL_8250 > > tristate "8250/16550 and compatible serial support" > > - depends on (BROKEN || !SPARC) > > + depends on (BROKEN || !SPARC) && !AVR32 > > select SERIAL_CORE > > ---help--- > > NAK. > > Add an asm/serial.h to the platform as it has PCI so will have 8250 PCI > devices available to it. A copy of the MIPS one should be right. Patch below. > Alan cu Adrian <-- snip --> This patch fixes the following build error with CONFIG_SERIAL_8250: <-- snip --> ... CC [M] drivers/serial/8250.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/serial/8250.c:95:24: error: asm/serial.h: No such file or directory make[3]: *** [drivers/serial/8250.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-04-19add include/asm-avr32/xor.hAdrian Bunk
This patch fixes the following compile error with CONFIG_MD_RAID456 on avr32: <-- snip --> ... CC [M] crypto/xor.o /home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:23:21: error: asm/xor.h: No such file or directory /home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c: In function 'calibrate_xor_blocks': /home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:131: error: 'XOR_TRY_TEMPLATES' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:131: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:131: error: for each function it appears in.) make[2]: *** [crypto/xor.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-04-19avr32: Generic clockevents supportDavid Brownell
This combines three patches from David Brownell: * avr32: tclib support * avr32: simplify clocksources * avr32: Turn count/compare into a oneshot clockevent device Register both TC blocks (instead of just the first one) so that the AT32/AT91 tclib code will pick them up (instead of just the avr32-only PIT-style clocksource). Rename the first one and its resources appropriately. More cleanups to the cycle counter clocksource code - Disable all the weak symbol magic; remove the AVR32-only TCB-based clocksource code (source and header). - Mark the __init code properly. - Don't forget to report IRQF_TIMER. - Make the system work properly with this clocksource, by preventing use of the CPU "idle" sleep state in the idle loop when it's used. Package the avr32 count/compare timekeeping support as a oneshot clockevent device, so it supports NO_HZ and high res timers. This means it also supports plugging in other clockevent devices and clocksources. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19avr32: Move sleep code into mach-at32apHaavard Skinnemoen
Create a new file, pm-at32ap700x.S, in mach-at32ap and move the CPU idle sleep code there. Make it possible to disable the sleep code. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19avr32: Use constants from sysreg.h in asm.hHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19avr32: Delete mostly unused header asm/intc.hHaavard Skinnemoen
Move the only thing that was actually implemented and used in asm/intc.h, intc_get_pending(), into asm/irq.h and delete asm/intc.h Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19avr32: pass i2c board info through at32_add_device_twiBen Nizette
New-style I2C drivers require that motherboard-mounted I2C devices are registered with the I2C core, typically at arch_initcall time. This can be done nice and neat by passing the struct i2c_board_info[] through at32_add_device_twi just like we do for the SPI board info. While we've got the hood up, remove a duplicate declaration of at32_add_device_twi() in board.h. [hskinnemoen@atmel.com: add missing i2c_board_info forward-declaration] Signed-Off-By: Ben Nizette <bn@niasdigital.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19avr32: cleanup - use _AC macro to define PAGE_SIZECyrill Gorcunov
PAGE_SIZE is used both from assembly and C code. We want to have type specifiers when using it from C, but this will make the assembler confused, so we need to make it conditional. This is exactly what the _AC macro is for, so using it allows us to get rid of a few lines of cpp noise. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19Merge branch 'master' of ↵Haavard Skinnemoen
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/usba-2.6.26 into base
2008-04-17Generic semaphore implementationMatthew Wilcox
Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-04-06atmel_usba_udc: move endpoint declarations into platform data.Stelian Pop
The atmel_usba_udc driver is being used by several platforms and arches (avr32 and at91 ATM), and each platform may have different endpoint settings. The patch below moves the endpoint declarations into the platform data and make the necessary adjustments for AVR32 (improved by Haavard Skinnemoen <hskinnemoen@atmel.com>). Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-02kvm: provide kvm.h for all architecture: fixes headers_installChristian Borntraeger
Currently include/linux/kvm.h is not considered by make headers_install, because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h. This problem was introduced by commit fb56dbb31c4738a3918db81fd24da732ce3b4ae6 Author: Avi Kivity <avi@qumranet.com> Date: Sun Dec 2 10:50:06 2007 +0200 KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h> includes, not existing. Rather than add a zillion <asm/kvm.h>s, export kvm. only if the arch actually supports it. Signed-off-by: Avi Kivity <avi@qumranet.com> which makes this an 2.6.25 regression. One way of solving the issue is to enhance Kbuild, but Avi and David conviced me, that changing headers_install is not the way to go. This patch changes the definition for linux/kvm.h to unifdef-y. If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all architectures without asm/kvm.h. Therefore, this patch also provides asm/kvm.h on all architectures. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Avi Kivity <avi@qumranet.com> Cc: Sam Ravnborg <sam@ravnborg.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-10avr32: Work around byteswap bug in gcc < 4.2Haavard Skinnemoen
gcc versions earlier than 4.2 sign-extends the result of le16_to_cpu() and friends when we implement __arch__swabX() using __builtin_bswap_X(). Disable our arch-specific optimizations when those gcc versions are being used. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-13AVR32: Define PAGE_SHAREDHaavard Skinnemoen
The virtual framebuffer driver needs PAGE_SHARED, which is not defined on avr32. Define it. Reported-by: Oliver Zander <ozander@como.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-08CONFIG_HIGHPTE vs. sub-page page tables.Martin Schwidefsky
Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08Basic PWM driver for AVR32 and AT91David Brownell
PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08asm-*/posix_types.h: scrub __GLIBC__Mike Frysinger
Some arches (like alpha and ia64) already have a clean posix_types.h header. This brings all the others in line by removing all references to __GLIBC__ (and some undocumented __USE_ALL). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08aout: move STACK_TOP[_MAX] to asm/processor.hDavid Howells
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Add cmpxchg_local to avr32Mathieu Desnoyers
Use the new generic cmpxchg_local (disables interrupt) for 8, 16 and 64 bits cmpxchg_local. Use the __cmpxchg_u32 primitive for 32 bits cmpxchg_local. Note that cmpxchg only uses the __cmpxchg_u32 or __cmpxchg_u64 and will cause a linker error if called with 8 or 16 bits argument. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Sanitize the type of struct user.u_ar0H. Peter Anvin
struct user.u_ar0 is defined to contain a pointer offset on all architectures in which it is defined (all architectures which define an a.out format except SPARC.) However, it has a pointer type in the headers, which is pointless -- <asm/user.h> is not exported to userspace, and it just makes the code messy. Redefine the field as "unsigned long" (which is the same size as a pointer on all Linux architectures) and change the setting code to user offsetof() instead of hand-coded arithmetic. Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Håvard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Cleanup asm/{elf,page,user}.h: #ifdef __KERNEL__ is no longer neededKirill A. Shutemov
asm/elf.h, asm/page.h and asm/user.h don't export to userspace now, so we can drop #ifdef __KERNEL__ for them. [k.shutemov@gmail.com: remove #ifdef __KERNEL_] Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Reviewed-by: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Fix __const_udelay declaration and definition mismatchesJeff Dike
The declaration and implementation of __const_udelay use different names for the parameter on a number of architectures: include/asm-avr32/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/avr32/lib/delay.c:39:inline void __const_udelay(unsigned long xloops) include/asm-sh/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/sh/lib/delay.c:22:inline void __const_udelay(unsigned long xloops) include/asm-m32r/delay.h:15:extern void __const_udelay(unsigned long usecs); arch/m32r/lib/delay.c:58:void __const_udelay(unsigned long xloops) include/asm-x86/delay.h:16:extern void __const_udelay(unsigned long usecs); arch/x86/lib/delay_32.c:82:inline void __const_udelay(unsigned long xloops) arch/x86/lib/delay_64.c:46:inline void __const_udelay(unsigned long xloops) The units of the parameter isn't usecs, so that name is definitely wrong. It's also not exactly loops, so I suppose xloops is an OK name. This patch changes these names from usecs to xloops. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06read_current_timer() cleanupsAndrew Morton
- All implementations can be __devinit - The function prototypes were in asm/timex.h but they all must be the same, so create a single declaration in linux/timex.h. - uninline the sparc64 version to match the other architectures - Don't bother #defining ARCH_HAS_READ_CURRENT_TIMER to a particular value. [ezk@cs.sunysb.edu: fix build] Cc: "David S. Miller" <davem@davemloft.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05Fix timerfd breakage on avr32Haavard Skinnemoen
Hmm. Someone removed the timerfd() syscall... Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05add mm argument to pte/pmd/pud/pgd_freeBenjamin Herrenschmidt
(with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05gpiolib: avr32 at32ap platform supportDavid Brownell
Teach AVR32 to use the "GPIO Library" when exposing its GPIOs, so that signals on external chips (like GPIO expanders) can easily be used. This mostly reorganizes some existing logic, with two minor changes in behavior: - The PSR registers are used instead of the previous "gpio_mask" values, matching AT91 behavior and removing some duplication between that role and that of "pinmux_mask". - NR_IRQs grew to acommodate a bank of external GPIOs. Eventually this number should probably become a board-specific config option. There's a debugfs dump of status for the built-in GPIOs, showing which pins have deglitching, pullups, or open drain drive enabled, as well as the ID string used when requesting each IRQ. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31[NET]: Introducing socket mark socket option.Laszlo Attila Toth
A userspace program may wish to set the mark for each packets its send without using the netfilter MARK target. Changing the mark can be used for mark based routing without netfilter or for packet filtering. It requires CAP_NET_ADMIN capability. Signed-off-by: Laszlo Attila Toth <panther@balabit.hu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28remove __attribute_used__Adrian Bunk
Remove the deprecated __attribute_used__. [Introduce __section in a few places to silence checkpatch /sam] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-26[ARM] 4764/1: [AT91] AT91CAP9 core supportAndrew Victor
Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-25[AVR32] NMI debuggingHaavard Skinnemoen
Change the NMI handler to use the die notifier chain to signal anyone who cares. Add a simple "nmi debugger" which hooks into this chain and that may dump registers, task state, etc. when it happens. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25[AVR32] Add support for AT32AP7001 and AT32AP7002Haavard Skinnemoen
These are derivatives of the AT32AP7000 chip, which means that most of the code stays the same. Rename a few files, functions, definitions and config symbols to reflect that they apply to all AP700x chips, and exclude some platform devices from chips where they aren't present. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>