aboutsummaryrefslogtreecommitdiff
path: root/include/asm-i386/desc.h
AgeCommit message (Collapse)Author
2006-12-07[PATCH] paravirt: Patch inline replacements for paravirt interceptsRusty Russell
It turns out that the most called ops, by several orders of magnitude, are the interrupt manipulation ops. These are obvious candidates for patching, so mark them up and create infrastructure for it. The method used is that the ops structure has a patch function, which is called for each place which needs to be patched: this returns a number of instructions (the rest are NOP-padded). Usually we can spare a register (%eax) for the binary patched code to use, but in a couple of critical places in entry.S we can't: we make the clobbers explicit at the call site, and manually clobber the allowed registers in debug mode as an extra check. And: Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT. And: AK: Fix warnings in x86-64 alternative.c build And: AK: Fix compilation with defconfig And: ^From: Andrew Morton <akpm@osdl.org> Some binutlises still like to emit references to __stop_parainstructions and __start_parainstructions. And: AK: Fix warnings about unused variables when PARAVIRT is disabled. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] paravirt: header and stubs for paravirtualisationRusty Russell
Create a paravirt.h header for all the critical operations which need to be replaced with hypervisor calls, and include that instead of defining native operations, when CONFIG_PARAVIRT. This patch does the dumbest possible replacement of paravirtualized instructions: calls through a "paravirt_ops" structure. Currently these are function implementations of native hardware: hypervisors will override the ops structure with their own variants. All the pv-ops functions are declared "fastcall" so that a specific register-based ABI is used, to make inlining assember easier. And: +From: Andy Whitcroft <apw@shadowen.org> The paravirt ops introduce a 'weak' attribute onto memory_setup(). Code ordering leads to the following warnings on x86: arch/i386/kernel/setup.c:651: warning: weak declaration of `memory_setup' after first use results in unspecified behavior Move memory_setup() to avoid this. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andy Whitcroft <apw@shadowen.org>
2006-12-07[PATCH] i386: espfix cleanupStas Sergeev
Clean up the espfix code: - Introduced PER_CPU() macro to be used from asm - Introduced GET_DESC_BASE() macro to be used from asm - Rewrote the fixup code in asm, as calling a C code with the altered %ss appeared to be unsafe - No longer altering the stack from a .fixup section - 16bit per-cpu stack is no longer used, instead the stack segment base is patched the way so that the high word of the kernel and user %esp are the same. - Added the limit-patching for the espfix segment. (Chuck Ebbert) [jeremy@goop.org: use the x86 scaling addressing mode rather than shifting] Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Zachary Amsden <zach@vmware.com> Acked-by: Chuck Ebbert <76306.1226@compuserve.com> Acked-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-12-07[PATCH] i386: remove default_ldt, and simplify ldt-setting.Jeremy Fitzhardinge
This patch removes the default_ldt[] array, as it has been unused since iBCS stopped being supported. This means it is now possible to actually set an empty LDT segment. In order to deal with this, the set_ldt_desc/load_LDT pair has been replaced with a single set_ldt() operation which is responsible for both setting up the LDT descriptor in the GDT, and reloading the LDT register. If there are no LDT entries, the LDT register is loaded with a NULL descriptor. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Acked-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2006-09-26[PATCH] i386: Fix pack_descriptor()Jeremy Fitzhardinge
Fix pack_descriptor: 1. flags are bits 20-23 in the high word 2. limit's 4 msb are bits 16-19 in the high word These haven't mattered so far, because all users have had small limits and a flags setting of 0. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> ===================================================================
2006-09-26[PATCH] i386: Descriptor and trap table cleanups.Rusty Russell
The implementation comes from Zach's [RFC, PATCH 10/24] i386 Vmi descriptor changes: Descriptor and trap table cleanups. Add cleanly written accessors for IDT and GDT gates so the subarch may override them. Note that this allows the hypervisor to transparently tweak the DPL of the descriptors as well as the RPL of segments in those descriptors, with no unnecessary kernel code modification. It also allows the hypervisor implementation of the VMI to tweak the gates, allowing for custom exception frames or extra layers of indirection above the guest fault / IRQ handlers. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andi Kleen <ak@suse.de>
2006-02-24[PATCH] x86: fix broken SMP boot sequenceJames Bottomley
Recent GDT changes broke the SMP boot sequence if the booting CPU is numbered anything other than zero. There's also a subtle source of error in that the boot time CPU now uses cpu_gdt_table (which is actually the GDT for booting CPUs in head.S). This patch fixes both problems by making GDT descriptors themselves allocated from a per_cpu area and switching to them in cpu_init(), which now means that cpu_gdt_table is exclusively used for booting CPUs again. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Matt Tolentino <metolent@snoqualmie.dp.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] x86: GDT alignment fixZachary Amsden
Make GDT page aligned and page padded to support running inside of a hypervisor. This prevents false sharing of the GDT page with other hot data, which is not allowed in Xen, and causes performance problems in VMware. Rather than go back to the old method of statically allocating the GDT (which wastes unneded space for non-present CPUs), the GDT for APs is allocated dynamically. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] x86: add an accessor function for getting the per-CPU gdtZachary Amsden
Add an accessor function for getting the per-CPU gdt. Callee must already have the CPU. Signed-off-by: Zachary Amsden <zach@vmware.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] x86: introduce a write acessor for updating the current LDTZachary Amsden
Introduce a write acessor for updating the current LDT. This is required for hypervisors like Xen that do not allow LDT pages to be directly written. Testing - here's a fun little LDT test that can be trivially modified to test limits as well. /* * Copyright (c) 2005, Zachary Amsden (zach@vmware.com) * This is licensed under the GPL. */ #include <stdio.h> #include <signal.h> #include <asm/ldt.h> #include <asm/segment.h> #include <sys/types.h> #include <unistd.h> #include <sys/mman.h> #define __KERNEL__ #include <asm/page.h> void main(void) { struct user_desc desc; char *code; unsigned long long tsc; code = (char *)mmap(0, 8192, PROT_EXEC|PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); desc.entry_number = 0; desc.base_addr = code; desc.limit = 1; desc.seg_32bit = 1; desc.contents = MODIFY_LDT_CONTENTS_CODE; desc.read_exec_only = 0; desc.limit_in_pages = 1; desc.seg_not_present = 0; desc.useable = 1; if (modify_ldt(1, &desc, sizeof(desc)) != 0) { perror("modify_ldt"); } printf("code base is 0x%08x\n", (unsigned)code); code[0x0ffe] = 0x0f; /* rdtsc */ code[0x0fff] = 0x31; code[0x1000] = 0xcb; /* lret */ __asm__ __volatile("lcall $7,$0xffe" : "=A" (tsc)); printf("TSC is 0x%016llx\n", tsc); } Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] i386: generate better code around descriptor update and access functionsZachary Amsden
GCC can generate better code around descriptor update and access functions when there is not an explicit "eax" register constraint. Testing: You won't boot if this is messed up, since the TSS descriptor will be corrupted. Verified the assembler and booted. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] i386: inline assembler: cleanup and encapsulate descriptor and task ↵Zachary Amsden
register management i386 inline assembler cleanup. This change encapsulates descriptor and task register management. Also, it is possible to improve assembler generation in two cases; savesegment may store the value in a register instead of a memory location, which allows GCC to optimize stack variables into registers, and MOV MEM, SEG is always a 16-bit write to memory, making the casting in math-emu unnecessary. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!