aboutsummaryrefslogtreecommitdiff
path: root/include/asm-powerpc/mpc52xx.h
AgeCommit message (Collapse)Author
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-26[POWERPC] Add common clock setting routine mpc52xx_psc_set_clkdiv()Grant Likely
PSC drivers should not access the CDM registers directly. Instead provide a common routine for setting the PSC clock parameters with the required locking. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: eliminate mpc52xx_*_map_*() functions.Grant Likely
mpc5200 platform code defines a bunch of map functions which duplicate the functionality of of_iomap(). Remove them and use of_iomap() instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: Add common mpc52xx_setup_pci() routineMarian Balakowicz
This patch moves a generic pci init code from lite5200 platform file to a common mpc52xx_setup_pci() routine and adds additional compatibility property verification. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-21[POWERPC] Add restart support for mpc52xx based platformsMarian Balakowicz
Add common helper routines: mpc52xx_map_wdt() and mpc52xx_restart(). Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-21[POWERPC] Add mpc52xx_find_and_map_path(), refactor utility functionsMarian Balakowicz
Add helper routine mpc52xx_find_and_map_path(). Extract common code to mpc52xx_map_node() and refactor mpc52xx_find_and_map(). Signed-off-by: Jan Wrobel <wrr@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-21[POWERPC] bestcomm: Restrict bus prefetch bugfix to original mpc5200 silicon.Grant Likely
Only the MPC5200 needs this bug fix. MPC5200B is okay. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-18PM: Rework struct platform_suspend_opsRafael J. Wysocki
There is no reason why the .prepare() and .finish() methods in 'struct platform_suspend_ops' should take any arguments, since architectures don't use these methods' argument in any practically meaningful way (ie. either the target system sleep state is conveyed to the platform by .set_target(), or there is only one suspend state supported and it is indicated to the PM core by .valid(), or .prepare() and .finish() aren't defined at all).  There also is no reason why .finish() should return any result. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10[POWERPC] MPC5200: Don't make firmware fixups into common codeGrant Likely
The Lite5200 u-boot image doesn't entirely configure the processor correctly and so Linux needs to fixup the cpu setup in setup_arch. Fixing the CPU setup is good, but making it into common code is not a good idea. New board ports should be encouraged not to take the lead of the lite5200 and instead get their firmware to setup the CPU the right way. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tnt.com>
2007-09-19[POWERPC] MPC5200 low power modeDomen Puncer
Low-power mode implementation for Lite5200b. Some I/O registers are also saved here. A recent U-Boot that supports this (lite5200b_PM_config) is needed. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] mpc52xx suspend to deep-sleepDomen Puncer
Implement deep-sleep on MPC52xx. SDRAM is put into self-refresh with help of SRAM code (alternatives would be code in FLASH, I-cache). Interrupt code must also not be in SDRAM, so put it in I-cache. MPC52xx core is static, so contents will remain intact even with clocks turned off. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08[POWERPC] Add mpc52xx/lite5200 PCI supportGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-09[POWERPC] 52xx: Don't use device_initcall to probe of_platform_busSylvain Munaut
Using device_initcall makes it happen for every platform that compiles this file in. This is really bad, for obvious reasons. Instead, we use the .init field of the machine description. If the platform needs the hook to do something specific it can provides its own function and call mpc52xx_declare_of_platform_devices from there. If not, the mpc52xx_declare_of_platform_devices function can directly be used as the init hook. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Add common routines for 52xx support in arch/powerpcGrant Likely
Adds utility routines used by 52xx device drivers and board support code. Main functionality is to add device nodes to the of_platform_bus, retrieve the IPB bus frequency, and find+ioremap device registers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Separate IRQ config / register set from main headerSylvain Munaut
There is no need to expose these settings outside the scope of the interrupt controller code itself. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13[PATCH] Add MPC5200 Interrupt Controller support.Nicolas DET
This adds support for the MPC52xx Interrupt controller for ARCH=powerpc. It includes the main code in arch/powerpc/sysdev/ as well as a header file in include/asm-powerpc. Signed-off-by: Nicolas DET <nd@bplan-gmbh.de> Acked-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>