aboutsummaryrefslogtreecommitdiff
path: root/include/asm-powerpc
AgeCommit message (Collapse)Author
2007-10-04[POWERPC] mpc82xx: Define CPU_FTR_NEED_COHERENTScott Wood
The 8272 (and presumably other PCI PQ2 chips) appear to have the same issue as the 83xx regarding PCI streaming DMA. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] cpm2: Add cpm2_set_pin().Scott Wood
This provides a generic way for board code to set up CPM pins, rather than directly poking magic values into registers. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] cpm2: Add SCCs to cpm2_clk_setup(), and cpm2_smc_clk_setup().Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04[POWERPC] cpm2: Infrastructure code cleanup.Scott Wood
Mostly sparse fixes (__iomem annotations, etc); also, cpm2_immr is used rather than creating many temporary mappings. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] 8xx: Add pin and clock setting functions.Scott Wood
These let board code set up pins and clocks without having to put magic numbers directly into the registers. The clock function is mostly duplicated from the cpm2 version; hopefully this stuff can be merged at some point. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] 8xx: Infrastructure code cleanup.Scott Wood
1. Keep a global mpc8xx_immr mapping, rather than constantly creating temporary mappings. 2. Look for new fsl,cpm1 and fsl,cpm1-pic names. 3. Always reset the CPM when not using the udbg console; this is required in case the firmware initialized a device that is incompatible with one that the kernel is about to use. 4. Remove some superfluous casts and header includes. 5. Change a usage of IMAP_ADDR to get_immrbase(). 6. Use phys_addr_t, not uint, for dpram_pbase. 7. Various sparse-related fixes, such as __iomem annotations. 8. Remove mpc8xx_show_cpuinfo, which doesn't provide anything useful beyond the generic cpuinfo handler. 9. Move prototypes for 8xx support functions from board files to sysdev/commproc.h. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] Add early debug console for CPM serial ports.Scott Wood
This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] Virtex: add xilinx interrupt controller driverGrant Likely
Adds support for the Xilinx opb-intc interrupt controller Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03[POWERPC] Implement clockevents driver for powerpcTony Breeds
This registers a clock event structure for the decrementer and turns on CONFIG_GENERIC_CLOCKEVENTS, which means that we now don't need most of timer_interrupt(), since the work is done in generic code. For secondary CPUs, their decrementer clockevent is registered when the CPU comes up (the generic code automatically removes the clockevent when the CPU goes down). Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Celleb: New HTAB Guest OS Interface on BeatIshizaki Kou
This changes the Celleb code to work with new Guest OS Interface to tweak HTAB on Beat. It detects old and new Guest OS Interfaces automatically. Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Update mpic to use dcr_host_t.baseMichael Ellerman
Now that dcr_host_t contains the base address, we can use that in the mpic code, rather than storing it separately. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Store the base address in dcr_host_tMichael Ellerman
In its current form, dcr_map() doesn't remember the base address you passed it, which means you need to store it somewhere else. Rather than adding the base to another struct it seems simpler to store it in the dcr_host_t. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Include pagemap.h in asm/powerpc/tlb.hMathieu Desnoyers
Fixes this powerpc build error in 2.6.22-rc6-mm1 for powerpc 64 with CONFIG_SWAP=n : In file included from include2/asm/tlb.h:60, from /home/compudj/git/linux-2.6-lttng/arch/powerpc/mm/init_64. c:56: /home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h: In function 'tlb_flush_mmu': /home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h:76: error: implicit declaration of function 'release_pages' /home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h: In function 'tlb_remove_page': /home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h:105: error: implicit declaration of function 'page_cache_release' make[2]: *** [arch/powerpc/mm/init_64.o] Error 1 release_pages is declared in linux/pagemap.h, but cannot be included in linux/swap.h because of a sparc related comment: /* only sparc can not include linux/pagemap.h in this file * so leave page_cache_release and release_pages undeclared... */ #define free_page_and_swap_cache(page) \ page_cache_release(page) #define free_pages_and_swap_cache(pages, nr) \ release_pages((pages), (nr), 0); Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] ppc64: support CONFIG_DEBUG_PREEMPTHugh Dickins
Add CONFIG_DEBUG_PREEMPT support to ppc64: it was useful for testing get_paca() preemption. Cheat a little, just use debug_smp_processor_id() in the debug version of get_paca(): it contains all the right checks and reporting, though get_paca() doesn't really use smp_processor_id(). Use local_paca for what might have been called __raw_get_paca(). Silence harmless warnings from io.h and lparcfg.c with local_paca - it is okay for iseries_lparcfg_data to be referencing shared_proc with preemption enabled: all cpus should show the same value for shared_proc. Why do other architectures need TRACE_IRQFLAGS_SUPPORT for DEBUG_PREEMPT? I don't know, ppc64 appears to get along fine without it. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Limit range of __init_ref_ok somewhatStephen Rothwell
This patch introduces zalloc_maybe_bootmem and uses it so that we don't have to mark a whole (largish) routine as __init_ref_ok. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Make vio_bus_type staticStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] clk.h interface for platformsDomen Puncer
This provides an implementation of the <linux/clk.h> interface for arch/powerpc using a set of function pointers in clk_functions. Platforms that want to support this interface should fill clk_functions and select CONFIG_PPC_CLOCK in Kconfig. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22[POWERPC] Prevent direct inclusion of <asm/rwsem.h>.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22[POWERPC] Use __attribute__ in asm-powerpcMike Frysinger
Pretty much everyone uses "__attribute__" or "attribute", no one uses "__attribute". This tweaks the three places in asm-powerpc where this comes up. While only asm-powerpc/types.h is interesting (for userspace), I did asm-powerpc/processor.h as well for consistency. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-20Merge branch 'linux-2.6'Paul Mackerras
2007-09-19[POWERPC] Fix timekeeping on PowerPC 601Benjamin Herrenschmidt
Recent changes to the timekeeping code broke support for the PowerPC 601 processor which doesn't have the usual timebase facility but a slightly different thing called (yuck) the RTC. This fixes it, boot tested on an old 601 based PowerMac 7200. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] Size swapper_pg_dir correctlyStephen Rothwell
David Gibson pointed out that swapper_pg_dir actually need to be PGD_TABLE_SIZE bytes long not PAGE_SIZE. This actually saves 64k in the bss for a kernel ppc64_defconfig built with CONFIG_PPC_64K_PAGES. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] Fix section mismatch in PCI codeStephen Rothwell
Create a helper function (alloc_maybe_bootmem) that is marked __init_refok to limit the chances of mistakenly referring to other __init routines. WARNING: vmlinux.o(.text+0x2a9c4): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.update_dn_pci_info' and '.pci_dn_reconfig_notifier') WARNING: vmlinux.o(.text+0x36430): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.mpic_msi_init_allocator' and '.find_ht_magic_addr') WARNING: vmlinux.o(.text+0x5e804): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') WARNING: vmlinux.o(.text+0x5e8e8): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') WARNING: vmlinux.o(.text+0x5e968): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] MPC5200 low power modeDomen Puncer
Low-power mode implementation for Lite5200b. Some I/O registers are also saved here. A recent U-Boot that supports this (lite5200b_PM_config) is needed. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] spufs: Handle errors in SPU coredump code, and support coredump to ↵Michael Ellerman
a pipe Rework spufs_coredump_extra_notes_write() to check for and return errors. If we're coredumping to a pipe we can't trust file->f_pos, we need to maintain the foffset value passed to us. The cleanest way to do this is to have the low level write routine increment foffset when we've successfully written. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] spufs: Cleanup ELF coredump extra notes logicMichael Ellerman
To start with, arch_notes_size() etc. is a little too ambiguous a name for my liking, so change the function names to be more explicit. Calling through macros is ugly, especially with hidden parameters, so don't do that, call the routines directly. Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide whether we want the extern declarations or the empty versions. Since we have empty routines, actually use them in the coredump code to save a few #ifdefs. We want to change the handling of foffset so that the write routine updates foffset as it goes, instead of using file->f_pos (so that writing to a pipe works). So pass foffset to the write routine, and for now just set it to file->f_pos at the end of writing. It should also be possible for the write routine to fail, so change it to return int and treat a non-zero return as failure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] spufs: Combine spufs_coredump_calls with spufs_callsMichael Ellerman
Because spufs might be built as a module, we can't have other parts of the kernel calling directly into it, we need stub routines that check first if the module is loaded. Currently we have two structures which hold callbacks for these stubs, the syscalls are in spufs_calls and the coredump calls are in spufs_coredump_calls. In both cases the logic for registering/unregistering is essentially the same, so we can simplify things by combining the two. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] spufs: Remove asmlinkage from spufs_callsJeremy Kerr
spu_create and spu_run are wrapped by the cell syscall layer, so we don't need the asmlinkage. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19[POWERPC] cell: Unify spufs syscall pathJeremy Kerr
At present, a built-in spufs will not use the spufs_calls callbacks, but directly call sys_spu_create. This saves us an indirect branch, but means we have duplicated functions - one for CONFIG_SPU_FS=y and one for =m. This change unifies the spufs syscall path, and provides access to the spufs_calls structure through a get/put pair. At present, the only user of the spufs_calls structure is spu_syscalls.c, but this will facilitate adding the coredump calls later. Everyone likes numbers, right? Here's a before/after comparison with CONFIG_SPU_FS=y, doing spu_create(); close(); 64k times. Before: [jk@cell ~]$ time ./spu_create performing 65536 spu_create calls real 0m24.075s user 0m0.146s sys 0m23.925s After: [jk@cell ~]$ time ./spu_create performing 65536 spu_create calls real 0m24.777s user 0m0.141s sys 0m24.631s So, we're adding around 11us per syscall, at the benefit of having only one syscall path. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-17[POWERPC] Remove APUS support from arch/ppcAdrian Bunk
Current status of APUS: - arch/powerpc/: removed in 2.6.23 - arch/ppc/: marked BROKEN since 2 years This therefore removes the remaining parts of APUS support from arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] 86xx: Fix definition of global-utilites structureTimur Tabi
The current definition of struct ccsr_guts in immap_86xx.h was for 85xx. This patch fixes that and replaces the vague integer types with sized types of the correct endianness. The unused struct ccsr_pci is also deleted. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] add clrsetbits macrosTimur Tabi
This patch adds the clrsetbits_xxx() macros, which are used to set and clear multiple bits in a single read-modify-write operation. Specify the bits to clear in the 'clear' parameter and the bits to set in the 'set' parameter. These macros can also be used to set a multiple-bit bit pattern using a mask, by specifying the mask in the 'clear' parameter and the new bit pattern in the 'set' parameter. There are big-endian and little-endian versions for 8, 16, 32, and 64 bits. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] QE: extern par_io_config_pin and par_io_data_set funcsAnton Vorontsov
This is needed to configure and control QE pario pins from the kernel. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Fix modpost warnings from head*.S on ppc32Kumar Gala
We get warnings like the following from the various ppc32 head*.S files: WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') Added a .text.head section simliar to what other architectures do since modpost already excludes this from its warnings. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Add cpu feature for SPE handlingKumar Gala
Make it so that SPE support can be determined at runtime. This is similiar to how we handle AltiVec. This allows us to have SPE support built in and work on processors with and without SPE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] PS3: Add new LV1 error codesGeert Uytterhoeven
Add new error codes that may be returned by the LV1 hypervisor Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Add workaround for MPICs with broken register readsOlof Johansson
Some versions of PWRficient 1682M have an interrupt controller in which the first register in each pair for interrupt sources doesn't always read with the right polarity/sense values. To work around this, keep a software copy of the register instead. Since it's not modified from the mpic itself, it's a feasible solution. Still, keep it under a config option to avoid wasting memory on other platforms. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Move lowlevel runlatch calls under cpu feature controlOlof Johansson
There's no need to call the runlatch on functions on processors that don't implement them (CPU_FTR_CTRL). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=yOlof Johansson
Export some of the implementation-specific registers via sysfs. Useful when debugging, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] Add an optional device_node pointer to the irq_hostMichael Ellerman
The majority of irq_host implementations (3 out of 4) are associated with a device_node, and need to stash it somewhere. Rather than having it somewhere different for each host, add an optional device_node pointer to the irq_host structure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-09-11[POWERPC] cell/PS3: Fix a bug that causes the PS3 to hang on the SPU Class 0 ↵Masato Noguchi
interrupt. The Cell BE Architecture spec states that the SPU MFC Class 0 interrupt is edge-triggered. The current spu interrupt handler assumes this behavior and does not clear the interrupt status. The PS3 hypervisor visualizes all SPU interrupts as level, and on return from the interrupt handler the hypervisor will deliver a new virtual interrupt for any unmasked interrupts which for which the status has not been cleared. This fix clears the interrupt status in the interrupt handler. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-28Merge branch 'linux-2.6' into for-2.6.24Paul Mackerras
2007-08-22[POWERPC] Copy over headers from arch/ppc to arch/powerpc that we needKumar Gala
To build arch/powerpc without including asm-ppc/ we need these files in asm-powerpc/ Moved some headers under arch/powerpc/platforms if they were only used by platform or driver files and fixed up the source file includes to match the new locations Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22[POWERPC] Split out iSeries specific exception macrosStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22[POWERPC] Move the exception macros into a header fileStephen Rothwell
It makes head_64.S a bit more readable and will allow us to move the iSeries exceptions elsewhere. This also removes the last line of the comment: * The following macros define the code that appears as * the prologue to each of the exception handlers. They * are split into two parts to allow a single kernel binary * to be used for pSeries and iSeries. * LOL. One day... - paulus Anything is possible. :-) Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22[POWERPC] Move iSeries startup code out of head_64.SStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22[POWERPC] Use strcasecmp() rather than strncasecmp() when determining device ↵Scott Wood
node compatibility The current code assumes "foo-bar" must always be compatible with a node compatible with "foo", which breaks device trees where this is not so. The "case" part is also wrong according to Open Firmware, but it's more likely to have drivers and/or device trees depending on it, and thus needs to be handled more carefully. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22[POWERPC] Add clrbits8 and setbits8Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22[POWERPC] iSeries: Clean up lparmap messStephen Rothwell
We need to have xLparMap in head_64.S so that it is at a fixed address (because the linker will not resolve (address & 0xffffffff) for us). But the assembler miscalculates the KERNEL_VSID() expressions. So put the confusing expressions into asm-offsets.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>