aboutsummaryrefslogtreecommitdiff
path: root/include/asm-ppc
AgeCommit message (Collapse)Author
2006-01-09[PATCH] powerpc: Add OF address parsing code (#2)Benjamin Herrenschmidt
Parsing addresses extracted from Open Firmware isn't a simple matter. We have various bits of code that try to do it in various place, including some heuristics in prom.c that pre-parse addresses at boot and fill device-nodes "addrs", but those are dodgy at best and I want to deprecate them. So this patch introduces a new set of routines that should be capable of parsing most types of addresses and translating them into CPU physical addresses. It currently works for things on PCI busses and ISA busses and should work on "standard" busses like the root bus or the MacIO bus that don't put funky flags in addresses. If you have other bus types that do use funky flags, you'll have to add new bus type translators, which is fairly easy. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09ppc: remove duplicate bseip.hPaul Mackerras
include/asm-ppc/bseip.h is a duplicate of arch/ppc/platforms/bseip.h and is not referenced anywhere, so get rid of it. Pointed out by Marcelo Tosatti. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: moved ipic code to arch/powerpcKumar Gala
Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc as a precursor of getting 83xx sub-arch building in arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-06[PATCH] ppc32: Allows compilation of a MPC52xx kernel without PCISylvain Munaut
Some custom cards might not need PCI, without this patch, compilation fails. Signed-off-by: Roger Blofeld <blofeldus@yahoo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: Modify Freescale MPC52xx IRQ mapping to _not_ use irq 0Sylvain Munaut
AFAIK IRQ number 0 is a perfectly valid IRQ number. But it seems there are numerous places where it's considered to be invalid or "no irq" value. Since that value is problematic, the IRQ mapping is changed to not use it. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] ppc32: remove "jumbo" member from ocp_func_emac_dataEugene Surovegin
Remove the not needed anymore "jumbo" member from ocp_func_emac_data. Jumbo frame support is handled by PPC4xx EMAC driver internally now. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16[PATCH] ppc: ppc4xx_dma DMA_MODE_{READ,WRITE} fixAl Viro
DMA_MODE_{READ,WRITE} are declared in asm-powerpc/dma.h and their declarations there match the definitions. Old declarations in ppc4xx_dma.h are not right anymore (wrong type, to start with). Killed them, added include of asm/dma.h where needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-19Merge branch 'mymerge' of ssh://ozlabs.org/home/sfr/kernel-sfrPaul Mackerras
2005-11-18[PATCH] ppc32: add missing define for fs_enet Ethernet driverVitaly Bordug
This adds the FCC_PSMR_RMII defenition, which is used in fs_enet to enable RMII mode. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-19powerpc: merge dma-mapping.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-19ppc32: move some dma routinesStephen Rothwell
Every other architecture define dma_cache_{inv,wback,wback_inv} in asm/io.h and doing so brings us closer to ppc64. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-16[PATCH] powerpc: replace page_to_virt() with lowmem_page_address() for Book-EKumar Gala
page_to_virt and lowmem_page_address provided equiavlent functionality so use the more standard lowmem_page_address This also addresses build issue in ARCH=powerpc since page_to_virt() has been removed from include/asm-powerpc/page.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14powerpc: Move a bunch of ppc64 headers to include/asm-powerpcPaul Mackerras
... and also delete some that are no longer used because we already had an include/asm-powerpc version of the header. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-13[PATCH] Update email address for KumarKumar Gala
Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernelBenjamin Herrenschmidt
This patch moves the vdso's to arch/powerpc, adds support for the 32 bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds some new (still untested) routines to both vdso's: clock_gettime() with support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same clocks) and get_tbfreq() for glibc to retreive the timebase frequency. Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits returns a long long (r3, r4) not a long. This is such that if we ever add support for >4Ghz timebases on ppc32, the userland interface won't have to change. I have tested gettimeofday() using some glibc patches in both ppc32 and ppc64 kernels using 32 bits userland (I haven't had a chance to test a 64 bits userland yet, but the implementation didn't change and was tested earlier). I haven't tested yet the new functions. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Merge cacheflush.h and cache.hDavid Gibson
The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Merge current.hDavid Gibson
This patch merges current.h. This is a one-big-ifdef merge, but both versions are so tiny, I think we can live with it. While we're at it, we get rid of the fairly pointless redirection through get_current() in the ppc64 version. Built and booted on POWER5 LPAR (ARCH=powerpc & ARCH=ppc64). Built for 32-bit pmac (ARCH=powerpc & ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10[PATCH] powerpc: Merge signal.hDavid Gibson
Having already merged the ppc and ppc64 versions of signal.c, this patch finishes the job by merging signal.h. The two versions were almost identical already. Notable changes: - We use BITS_PER_LONG to correctly size sigset_t - Remove some uneeded #includes and struct forward declarations. This does mean adding an include to signal_32.c which relied on the indirect inclusion of sigcontext.h - As the ppc64 version, the merged signal.h has prototypes for do_signal() and do_signal32(). Thus remove extra prototypes from ppc_ksyms.c which had them directly. Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09[PATCH] ppc32: Update MPC834x platform to work with new phylibKumar Gala
MPC834x uses the gianfar network driver which now uses the new phylib. We need to update the platform code to create a gianfar platform MDIO bus and pass the right intializations to the gianfar driver to make things work again. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08powerpc: merge ide.hStephen Rothwell
This is very simple with it being almost all ppc32 with just a couple of common defines. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc: Fix ARCH=ppc build with xmonBenjamin Herrenschmidt
xmon() prototype is inconsistent between ARCH=ppc and ARCH=powerpc, thus causing ARCH=ppc build breakage. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc: fix a bunch of warningsBenjamin Herrenschmidt
Building a PowerMac kernel with ARCH=powerpc causes a bunch of warnings, this fixes some of them Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08[PATCH] ppc64: SMU partition recoveryBenjamin Herrenschmidt
This patch adds the ability to the SMU driver to recover missing calibration partitions from the SMU chip itself. It also adds some dynamic mecanism to /proc/device-tree so that new properties are visible to userland. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08Merge ../linux-2.6Paul Mackerras
2005-11-07[PATCH] RapidIO support: ppc32Matt Porter
Adds PPC32 RIO support. Init code for the MPC85xx RIO ports and glue for the STx GP3 board to use it. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] fix remaining missing includesTim Schmielau
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-BootMatt Porter
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot as bootloader. The OpenBIOS bd_info struct is not used in the kernel anymore (only U-Boot now). uImage (U-Boot) tested on walnut, sycamore and bubinga zImage (OpenBIOS) tested on sycamore, bubinga and ebony Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add Yucca (440SPe eval board) platformRoland Dreier
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add 440SPe supportRoland Dreier
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root port mode. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Dump error status for both PLB segments on 440SPRoland Dreier
The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a high-throughput segment and a low-latency segment). Fix our PLB register definitions to cope with this, and add code to dump the status of both segments when a machine check occurs. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Allow ERPN for early serial to depend on CPU typeRoland Dreier
The PowerPC 440SPe supports up to 16 GB of RAM, and therefore its IO registers are at 0x4_xxxx_xxxx instead of being at 0x1_xxxx_xxxx like most other PPC 440 chips. To allow for this, this patch moves the definition of the ERPN used for mapping UART0 from being hard-coded in the head_44x.S assembly code to being defined in ibm44x.h. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: handle access to non-present IO ports on 8xxMarcelo Tosatti
This adds exception table entries for I/O instructions on and changes MachineCheckException() slightly to cover 8xx specifics (on 8xx the MCE can be generated while executing the IO access instruction itself, which is not the case on PowerMac's, as the comment on traps.c details). Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-11-04Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-04powerpc: merge tlbflush.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04Merge with PaulusMichael Ellerman
2005-11-04powerpc: merge tlb.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-03powerpc: merge ucontext.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03[PATCH] ppc32 8xx: Fix harmless warning in 8xx_io/commproc.cMarcelo Tosatti
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03powerpc: merge sigcontext.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03powerpc: merge ptrace.hStephen Rothwell
Move struct ptregs32 into asm-ppc64/ppc32.h Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03powerpc: merge stat.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03powerpc: Merge asm-ppc/kexec.h and asm-ppc64/kexec.hMichael Ellerman
Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h. The only thing that's really changed is that we now allocate crash_notes properly on PPC32. It's address is exported via sysfs, so it's not correct for it to be a pointer. I've also removed some of the "we don't use this" comments, because they're wrong (or perhaps were referring only to arch code). Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-01[PATCH] missing platform_device.h includesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02Merge ../linux-2.6Paul Mackerras
2005-11-02[PATCH] powerpc: Merge futex.hDavid Gibson
This patch merges the ppc32 and ppc64 versions of futex.h, essentially by taking the ppc64 version as the powerpc version. The old ppc32 version did not implement the futex_atomic_op_inuser() callback (it always returned -ENOSYS), so FUTEX_WAKE_OP would not work on ppc32. In fact the ppc64 version of this function is almost suitable for ppc32 as well - the only change needed is to extend ppc_asm.h with a macro expanding to to the right pseudo-op to store a pointer (either ".long" or ".llong"). Built and booted on pSeries. Built for 32-bit powermac. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Merge bitops.hDavid Gibson
Here's a revised version. This re-introduces the set_bits() function from ppc64, which I removed because I thought it was unused (it exists on no other arch). In fact it is used in the powermac interrupt code (but not on pSeries). - We use LARXL/STCXL macros to generate the right (32 or 64 bit) instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S - ppc32 previously used a full "sync" barrier at the end of test_and_*_bit(), whereas ppc64 used an "isync". The merged version uses "isync", since I believe that's sufficient. - The ppc64 versions of then minix_*() bitmap functions have changed semantics. Previously on ppc64, these functions were big-endian (that is bit 0 was the LSB in the first 64-bit, big-endian word). On ppc32 (and x86, for that matter, they were little-endian. As far as I can tell, the big-endian usage was simply wrong - I guess no-one ever tried to use minixfs on ppc64. - On ppc32 find_next_bit() and find_next_zero_bit() are no longer inline (they were already out-of-line on ppc64). - For ppc64, sched_find_first_bit() has moved from mmu_context.h to the merged bitops. What it was doing in mmu_context.h in the first place, I have no idea. - The fls() function is now implemented using the cntlzw instruction on ppc64, instead of generic_fls(), as it already was on ppc32. - For ARCH=ppc, this patch requires adding arch/powerpc/lib to the arch/ppc/Makefile. This in turn requires some changes to arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc. Built and running on G5. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Merge ipcbuf.hDavid Gibson
This patch merges ppc32 and ppc64 versions of ipcbuf.h. The merge is essentially trivial, since the structure defined in each version was already identical. Only wrinkle is that the merged version now includes linux/types.h in order to get the fixed width integer types. In fact, the old versions probably should have been including that anyway, since the file uses various __kernel_*_t types. Built and booted on G5, built for 32-bit pmac, but not booted, since the merge tree currently doesn't boot there. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01powerpc: merge uaccess.hStephen Rothwell
There is still a bug to be fixed and more merging to be done. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>