aboutsummaryrefslogtreecommitdiff
path: root/include/asm-s390
AgeCommit message (Collapse)Author
2008-02-19[S390] find bit corner case.Martin Schwidefsky
Fix [ext2_]find_first_[zero_]bit for the corner case of an all clear or all set bit field by always handling that last word of the bit field with __ffz_word/__ffs_word. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] dynamic page tables.Martin Schwidefsky
Add support for different number of page table levels dependent on the highest address used for a process. This will cause a 31 bit process to use a two level page table instead of the four level page table that is the default after the pud has been introduced. Likewise a normal 64 bit process will use three levels instead of four. Only if a process runs out of the 4 tera bytes which can be addressed with a three level page table the fourth level is dynamically added. Then the process can use up to 8 peta byte. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] Add four level page tables for CONFIG_64BIT=y.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] 1K/2K page table pages.Martin Schwidefsky
This patch implements 1K/2K page table pages for s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] Remove a.out header file.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] VMEM_MAX_PHYS overflow on 31 bit.Martin Schwidefsky
With the new space saving spinlock_t and a non-debug configuration the struct page only has 32 bytes for 31 bit s390. The causes an overflow in the calculation of VMEM_MAX_PHYS which renders the kernel unbootable. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] Fix __ffs_word_loop/__ffz_word_loop inlnie assembly.Martin Schwidefsky
The black art of inline assemblies.. The new __ffs_word_loop/ __ffz_word_loop inline assemblies need an early clobber for the two input/output variables. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] Wire up new timerfd syscalls.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-08CONFIG_HIGHPTE vs. sub-page page tables.Martin Schwidefsky
Background: I've implemented 1K/2K page tables for s390. These sub-page page tables are required to properly support the s390 virtualization instruction with KVM. The SIE instruction requires that the page tables have 256 page table entries (pte) followed by 256 page status table entries (pgste). The pgstes are only required if the process is using the SIE instruction. The pgstes are updated by the hardware and by the hypervisor for a number of reasons, one of them is dirty and reference bit tracking. To avoid wasting memory the standard pte table allocation should return 1K/2K (31/64 bit) and 2K/4K if the process is using SIE. Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means the s390 version for pte_alloc_one cannot return a pointer to a struct page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one cannot return a pointer to a pte either, since that would require more than 32 bit for the return value of pte_alloc_one (and the pte * would not be accessible since its not kmapped). Solution: The only solution I found to this dilemma is a new typedef: a pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a later patch. For everybody else it will be a (struct page *). The additional problem with the initialization of the ptl lock and the NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and a destructor pgtable_page_dtor. The page table allocation and free functions need to call these two whenever a page table page is allocated or freed. pmd_populate will get a pgtable_t instead of a struct page pointer. To get the pgtable_t back from a pmd entry that has been installed with pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page call in free_pte_range and apply_to_pte_range. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08aout: move STACK_TOP[_MAX] to asm/processor.hDavid Howells
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08tty: s390 support for termios2.Heiko Carstens
Backend for s390. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08proc: seqfile convert proc_pid_status to properly handle pid namespacesEric W. Biederman
Currently we possibly lookup the pid in the wrong pid namespace. So seq_file convert proc_pid_status which ensures the proper pid namespaces is passed in. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: s390 build fix] [akpm@linux-foundation.org: fix task_name() output] [akpm@linux-foundation.org: fix nommu build] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andrew Morgan <morgan@kernel.org> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Paul Jackson <pj@sgi.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Add cmpxchg_local to s390Mathieu Desnoyers
Use the standard __cmpxchg for every type that can be updated atomically. Use the new generic cmpxchg_local (disables interrupt) for other types. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Sanitize the type of struct user.u_ar0H. Peter Anvin
struct user.u_ar0 is defined to contain a pointer offset on all architectures in which it is defined (all architectures which define an a.out format except SPARC.) However, it has a pointer type in the headers, which is pointless -- <asm/user.h> is not exported to userspace, and it just makes the code messy. Redefine the field as "unsigned long" (which is the same size as a pointer on all Linux architectures) and change the setting code to user offsetof() instead of hand-coded arithmetic. Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Håvard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Unexport asm/page.hKirill A. Shutemov
Do not export asm/page.h during make headers_install. This removes PAGE_SIZE from userspace headers. Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Reviewed-by: David Woodhouse <dwmw2@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Cleanup asm/{elf,page,user}.h: #ifdef __KERNEL__ is no longer neededKirill A. Shutemov
asm/elf.h, asm/page.h and asm/user.h don't export to userspace now, so we can drop #ifdef __KERNEL__ for them. [k.shutemov@gmail.com: remove #ifdef __KERNEL_] Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Reviewed-by: David Woodhouse <dwmw2@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06taskstats scaled time cleanupMichael Neuling
This moves the ability to scale cputime into generic code. This allows us to fix the issue in kernel/timer.c (noticed by Balbir) where we could only add an unscaled value to the scaled utime/stime. This adds a cputime_to_scaled function. As before, the POWERPC version does the scaling based on the last SPURR/PURR ratio calculated. The generic and s390 (only other arch to implement asm/cputime.h) versions are both NOPs. Also moves the SPURR and PURR snapshots closer. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: Jay Lan <jlan@engr.sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] dcss: Initialize workqueue before using it. [S390] Remove BUILD_BUG_ON() in vmem code. [S390] sclp_tty/sclp_vt220: Fix scheduling while atomic [S390] dasd: fix panic caused by alias device offline [S390] dasd: add ifcc handling [S390] latencytop s390 support. [S390] Implement ext2_find_next_bit. [S390] Cleanup & optimize bitops. [S390] Define GENERIC_LOCKBREAK. [S390] console: allow vt220 console to be the only console [S390] Fix couple of section mismatches. [S390] Fix smp_call_function_mask semantics. [S390] Fix linker script. [S390] DEBUG_PAGEALLOC support for s390. [S390] cio: Add shutdown callback for ccwgroup. [S390] cio: Update documentation. [S390] cio: Clean up chsc response code handling. [S390] cio: make sense id procedure work with partial hardware response
2008-02-05add mm argument to pte/pmd/pud/pgd_freeBenjamin Herrenschmidt
(with Martin Schwidefsky <schwidefsky@de.ibm.com>) The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as first argument. The free functions do not get the mm_struct argument. This is 1) asymmetrical and 2) to do mm related page table allocations the mm argument is needed on the free function as well. [kamalesh@linux.vnet.ibm.com: i386 fix] [akpm@linux-foundation.org: coding-syle fixes] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05maps4: rework TASK_SIZE macrosDave Hansen
The following replaces the earlier patches sent. It should address David Rientjes's comments, and has been compile tested on all the architectures that it touches, save for parisc. For the /proc/<pid>/pagemap code[1], we need to able to query how much virtual address space a particular task has. The trick is that we do it through /proc and can't use TASK_SIZE since it references "current" on some arches. The process opening the /proc file might be a 32-bit process opening a 64-bit process's pagemap file. x86_64 already has a TASK_SIZE_OF() macro: #define TASK_SIZE_OF(child) ((test_tsk_thread_flag(child, TIF_IA32)) ? IA32_PAGE_OFFSET : TASK_SIZE64) I'd like to have that for other architectures. So, add it for all the architectures that actually use "current" in their TASK_SIZE. For the others, just add a quick #define in sched.h to use plain old TASK_SIZE. 1. http://www.linuxworld.com/news/2007/042407-kernel.html - MIPS portion from Ralf Baechle <ralf@linux-mips.org> [akpm@linux-foundation.org: fix mips build] Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Matt Mackall <mpm@selenic.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05[S390] Remove BUILD_BUG_ON() in vmem code.Heiko Carstens
Remove BUILD_BUG_ON() in vmem code since it causes build failures if the size of struct page increases. Instead calculate at compile time the address of the highest physical address that can be added to the 1:1 mapping. This supposed to fix a build failure with the page owner tracking leak detector patches as reported by akpm. page-owner-tracking-leak-detector-broken-on-s390.patch can be removed from -mm again when this is merged. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] Implement ext2_find_next_bit.Heiko Carstens
Fixes this compile error: fs/ext4/mballoc.c: In function 'ext4_mb_generate_buddy': fs/ext4/mballoc.c:954: error: implicit declaration of function 'generic_find_next_le_bit' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] Cleanup & optimize bitops.Martin Schwidefsky
The bitops header is now a bit shorter and easier to understand since it uses less inline assembly. It requires some tricks to persuade the compiler to generate decent code. The ffz/ffs functions now use the _zb_findmap/_sb_findmap table as well. With this cleanup the new bitops for ext4 can be implemented with a few lines, instead of another large inline assembly. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] DEBUG_PAGEALLOC support for s390.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] cio: Add shutdown callback for ccwgroup.Cornelia Huck
This intendeds to make proper shutdown of qeth devices easier. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-03asm-*/compat.h: fix typo in commentMarcin Ślusarz
Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-31[NET]: Introducing socket mark socket option.Laszlo Attila Toth
A userspace program may wish to set the mark for each packets its send without using the netfilter MARK target. Changing the mark can be used for mark based routing without netfilter or for packet filtering. It requires CAP_NET_ADMIN capability. Signed-off-by: Laszlo Attila Toth <panther@balabit.hu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-30s390: use generic percpu linux-2.6.gittravis@sgi.com
Change s390 percpu.h to use asm-generic/percpu.h Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30modules: fold percpu_modcopy into module.ctravis@sgi.com
percpu_modcopy() is defined multiple times in arch files. However, the only user is module.c. Put a static definition into module.c and remove the definitions from the arch files. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30percpu: move arch XX_PER_CPU_XX definitions into linux/percpu.htravis@sgi.com
- Special consideration for IA64: Add the ability to specify arch specific per cpu flags - remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case. The arch definitions are all the same. So move them into linux/percpu.h. We cannot move DECLARE_PER_CPU since some include files just include asm/percpu.h to avoid include recursion problems. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30percpu: use a kconfig variable to signal arch specific percpu setuptravis@sgi.com
The use of the __GENERIC_PERCPU is a bit problematic since arches may want to run their own percpu setup while using the generic percpu definitions. Replace it through a kconfig variable. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-28ext4: Add ext4_find_next_bit()Aneesh Kumar K.V
This function is used by the ext4 multi block allocator patches. Also add generic_find_next_le_bit Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-01-26[S390] do local_irq_restore while spinning in spin_lock_irqsave.Hisashi Hifumi
In s390's spin_lock_irqsave, interrupts remain disabled while spinning. In other architectures like x86 and powerpc, interrupts are re-enabled while spinning if IRQ is not masked before spin_lock_irqsave is called. The following patch re-enables interrupts through local_irq_restore while spinning for a lock acquisition. This can improve system response. [heiko.carstens@de.ibm.com: removed saving of pc] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] add smp_call_function_maskCarsten Otte
This patch adds the s390 variant for smp_call_function_mask(). The implementation is pretty straight forward using the wrapper __smp_call_function_map() which already takes a cpumask_t argument. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Unused field / extern declaration in processor.hMartin Schwidefsky
Remove extern declaration of non-existent last_task_used_math and remove unused field error_code from the thread_struct. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] single-step cleanupRoland McGrath
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] include/asm-s390/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Use diag308 subcodes 3 and 6 for reboot and dump when possible.Michael Holzheu
This patch fixes a problem with the following scenario: 1. Linux booted from DASD "A" 2. Reboot from DASD "B" using "/sys/firmware/reipl/ccw/device" 3. Reboot DASD "B" Without this patch in step 3 on newer s390 systems under LPAR instead of DASD "B", DASD "A" will be booted. The reason is that in step 2 we use CCW reipl and in step 3 we use DIAG308 (subcode 3) reipl. DIAG308 does not notice the CCW reipl and still thinks that it has to reboot DASD "A". Before applying this fix, ensure to have MCF RJ9967101E or z9 GA3 base driver installed. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] kernel: Shutdown Actions InterfaceMichael Holzheu
In case of a kernel panic it is currently possible to specify that a dump should be created, the system should be rebooted or stopped. Virtual sysfs files under the directory /sys/firmware/ are used for that configuration. In addition to that, there are kernel parameters 'vmhalt', 'vmpoff' and 'vmpanic', which can be used to specify z/VM commands, which are automatically executed in case of halt, power off or a kernel panic. This patch combines both functionalities and allows to specify the z/VM CP commands also via sysfs attributes. In addition to that, it enhances the existing handling of shutdown triggers (e.g. halt or panic) and associated shutdown actions (e.g. dump or reipl) and makes it more flexible. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of additional_cpus kernel parameter.Heiko Carstens
It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Use new style spinlock initializer in __RWSEM_INITIALIZER.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Remove owner_pc member from raw_spinlock_t.Heiko Carstens
Used to contain the address of the holder of the lock. But since the spinlock code is not inlined anymore all locks contain the same address anyway. And since in addtition nobody complained about that for ages its obviously unused. So remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Change vmalloc defintionsChristian Borntraeger
Currently the vmalloc area starts at a dynamic address depending on the memory size. There was also an 8MB security hole after the physical memory to catch out-of-bounds accesses. We can simplify the code by putting the vmalloc area explicitely at the top of the kernel mapping and setting the vmalloc size to a fixed value of 128MB/128GB for 31bit/64bit systems. Part of the vmalloc area will be used for the vmem_map. This leaves an area of 96MB/1GB for normal vmalloc allocations. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Avoid warnings in tlblush.hMartin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Fix tlb flushing with idte.Martin Schwidefsky
The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Standby cpu activation/deactivation.Heiko Carstens
Add a new interface so that cpus can be put into standby state and configured state. Only offline cpus can be put into standby state or configured state. For that the new percpu sysfs attribute "configure" must be used. To put a cpu in standby state a "0" must be written to the attribute. In order to switch it into configured state a "1" must be written to the attribute. Only cpus in configured state can be brought online. In addition this patch introduces a static mapping of physical to logical cpus. As a result only the sysfs directories of present cpus will be created. To scan for new cpus the new sysfs attribute "rescan" must be used. Writing to /sys/devices/system/cpu/rescan will trigger a rescan of cpus and will create directories for new cpus. On IPL only configured cpus will be used. And on reboot/shutdown all cpus will remain in their current state (configured/standby). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Extend adapter interrupt interface.Peter Oberparleiter
From: Cornelia Huck <cornelia.huck@de.ibm.com> Change the adapter interrupt interface in order to allow multiple adapter interrupt handlers to be registered. Indicators are now allocated by cio instead of the device driver. The qdio parts have been Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-12-17[S390] pud_present/pmd_present bug.Martin Schwidefsky
Git commit 3610cce87af0693603db171d5b6f6735f5e3dc5b (yeah my own :-/) introduced a bug in regard to pud/pmd table entries. If the address of the page table refered to by a pud/pmd value happens to have zeroes in the lower 32 bits, pud_present and pmd_present return false. The obvious effect is that this triggers the BUG_ON in exit_mmap because some ptes will not get released on process end. Worse is that the next fault for memory covered by that pud/pmd will allocate another pmd/pte table and populate the pud/pmd entry. The old page table entries hanging below this entry are lost! The fix is simple, properly check against 0. The check is added for pud_none/pmd_none as well even if these two functions work because the invalid bit is in the lower 32 bits. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20[S390] Fix irq tracing and lockdep_sys_exit calls.Heiko Carstens
Current support for TRACE_IRQFLAGS and lockdep_sys_exit is broken. IRQ flag tracing is broken for program checks. Even worse is that the newly introduced calls to lockdep_sys_exit are in the critical section code which is not supposed to call any C functions. In addition the checks if locks are still held are also done when returning to kernel code which is broken as well. Fix all this by disabling interrupts and machine checks at the exit paths and then do the appropriate checks and calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-22Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] 4level-fixup cleanup [S390] Cleanup page table definitions. [S390] Introduce follow_table in uaccess_pt.c [S390] Remove unused user_seg from thread structure. [S390] tlb flush fix. [S390] kernel: Fix dump on panic for DASDs under LPAR. [S390] struct class_device -> struct device conversion. [S390] cio: Fix incomplete commit for uevent suppression. [S390] cio: Use to_channelpath() for device to channel path conversion. [S390] Add per-cpu idle time / idle count sysfs attributes. [S390] Update default configuration.