aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86/io_64.h
AgeCommit message (Collapse)Author
2008-06-02x86: MMIO and gcc re-ordering issueLinus Torvalds
On Tue, 27 May 2008, Linus Torvalds wrote: > > Expecting people to fix up all drivers is simply not going to happen. And > serializing things shouldn't be *that* expensive. People who cannot take > the expense can continue to use the magic __raw_writel() etc stuff. Of course, for non-x86, you kind of have to expect drivers to be well-behaved, so non-x86 can probably avoid this simply because there are less relevant drivers involved. Here's a UNTESTED patch for x86 that may or may not compile and work, and which serializes (on a compiler level) the IO accesses against regular memory accesses. __read[bwlq]()/__write[bwlq]() are not serialized with a :"memory" barrier, although since they still use "asm volatile" I suspect that i practice they are probably serial too. Did not look very closely at any generated code (only did a trivial test to see that the code looks *roughly* correct). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-24x86: PAT avoid aliasing in /dev/mem read/writevenkatesh.pallipadi@intel.com
Add xlate and unxlate around /dev/mem read/write. This sets up the mapping that can be used for /dev/mem read and write without aliasing worries. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17include/asm-x86/io_64.h: checkpatch cleanups - formatting onlyJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-24x86-32: Pass the full resource data to ioremap()Linus Torvalds
It appears that 64-bit PCI resources cannot possibly ever have worked on x86-32 even when the RESOURCES_64BIT config option was set, because any driver that tried to [pci_]ioremap() the resource would have been unable to do so because the high 32 bits would have been silently dropped on the floor by the ioremap() routines that only used "unsigned long". Change them to use "resource_size_t" instead, which properly encodes the whole 64-bit resource data if RESOURCES_64BIT is enabled. Acked-by: H. Peter Anvin <hpa@kernel.org> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30x86: make ioremap() UC by defaultIngo Molnar
Yes! A mere 120 c_p_a() fixing and rewriting patches later, we are now confident that we can enable UC by default for ioremap(), on x86 too. Every other architectures was doing this already. Doing so makes Linux more robust against MTRR mixups (which might go unnoticed if BIOS writers test other OSs only - where PAT might override bad MTRRs defaults). Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix ioremap APIThomas Gleixner
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change ioremap() to default to uncachedIngo Molnar
Prepare ioremap() to default to uncached. This will be the safest - but first we have to fix CPA. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: tweak io_64.h for paravirt.Glauber de Oliveira Costa
We need something here because we can't call in and out instructions directly. However, we have to be careful, because no indirections are allowed in misc_64.c , and paravirt_ops is a kind of one. So just call it directly there Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: various changes and cleanups to in_p/out_p delay detailsIngo Molnar
various changes to the in_p/out_p delay details: - add the io_delay=none method - make each method selectable from the kernel config - simplify the delay code a bit by getting rid of an indirect function call - add the /proc/sys/kernel/io_delay_type sysctl - change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed - make the io delay config not depend on CONFIG_DEBUG_KERNEL Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: "David P. Reed" <dpreed@reed.com>
2008-01-30x86: provide a DMI based port 0x80 I/O delay override.Rene Herman
x86: provide a DMI based port 0x80 I/O delay override. Certain (HP) laptops experience trouble from our port 0x80 I/O delay writes. This patch provides for a DMI based switch to the "alternate diagnostic port" 0xed (as used by some BIOSes as well) for these. David P. Reed confirmed that port 0xed works for him and provides a proper delay. The symptoms of _not_ working are a hanging machine, with "hwclock" use being a direct trigger. Earlier versions of this attempted to simply use udelay(2), with the 2 being a value tested to be a nicely conservative upper-bound with help from many on the linux-kernel mailinglist but that approach has two problems. First, pre-loops_per_jiffy calibration (which is post PIT init while some implementations of the PIT are actually one of the historically problematic devices that need the delay) udelay() isn't particularly well-defined. We could initialise loops_per_jiffy conservatively (and based on CPU family so as to not unduly delay old machines) which would sort of work, but... Second, delaying isn't the only effect that a write to port 0x80 has. It's also a PCI posting barrier which some devices may be explicitly or implicitly relying on. Alan Cox did a survey and found evidence that additionally some drivers may be racy on SMP without the bus locking outb. Switching to an inb() makes the timing too unpredictable and as such, this DMI based switch should be the safest approach for now. Any more invasive changes should get more rigid testing first. It's moreover only very few machines with the problem and a DMI based hack seems to fit that situation. This also introduces a command-line parameter "io_delay" to override the DMI based choice again: io_delay=<standard|alternate> where "standard" means using the standard port 0x80 and "alternate" port 0xed. This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and command-line ("io_delay=udelay") choice for testing purposes as well. This does not change the io_delay() in the boot code which is using the same port 0x80 I/O delay but those do not appear to be a problem as David P. Reed reported the problem was already gone after using the udelay version. He moreover reported that booting with "acpi=off" also fixed things and seeing as how ACPI isn't touched until after this DMI based I/O port switch I believe it's safe to leave the ones in the boot code be. The DMI strings from David's HP Pavilion dv9000z are in there already and we need to get/verify the DMI info from other machines with the problem, notably the HP Pavilion dv6000z. This patch is partly based on earlier patches from Pavel Machek and David P. Reed. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17Remove dma_cache_(wback|inv|wback_inv) functionsRalf Baechle
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-11i386/x86_64: move headers to include/asm-x86Thomas Gleixner
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>