aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86/nmi.h
AgeCommit message (Collapse)Author
2008-10-13traps: x86: various noop-changes preparing for unification of traps_xx.cAlexander van Heukelum
- reordering include files - whitespace changes - comment changes - removed unused bad_intr() - make default_do_nmi static Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-06Merge branches 'x86/alternatives', 'x86/cleanups', 'x86/commandline', ↵Ingo Molnar
'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/exports', 'x86/fpu', 'x86/gart', 'x86/idle', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/oprofile', 'x86/paravirt', 'x86/reboot', 'x86/sparse-fixes', 'x86/tsc', 'x86/urgent' and 'x86/vmalloc' into x86-v28-for-linus-phase1
2008-09-22x86, NMI watchdog: setup before enabling NMI watchdogAristeu Rozanski
There's a small window when NMI watchdog is being set up that if any NMIs are triggered, the NMI code will make make use of not initalized wd_ops elements: void setup_apic_nmi_watchdog(void *unused) { if (__get_cpu_var(wd_enabled)) return; /* cheap hack to support suspend/resume */ /* if cpu0 is not active neither should the other cpus */ if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) return; switch (nmi_watchdog) { case NMI_LOCAL_APIC: /* enable it before to avoid race with handler */ --> __get_cpu_var(wd_enabled) = 1; --> if (lapic_watchdog_init(nmi_hz) < 0) { (...) asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) { (...) if (nmi_watchdog_tick(regs, reason)) return; (...) notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { (...) if (!__get_cpu_var(wd_enabled)) return rc; switch (nmi_watchdog) { case NMI_LOCAL_APIC: rc |= lapic_wd_event(nmi_hz); (...) int lapic_wd_event(unsigned nmi_hz) { struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk); u64 ctr; --> rdmsrl(wd->perfctr_msr, ctr); and wd->*_msr will be initialized on each processor type specific setup, after enabling NMIs for PMIs. Since the counter was just set, the chances of an performance counter generated NMI is minimal, but any other unknown NMI would trigger the problem. This patch fixes the problem by setting everything up before enabling performance counter generated NMIs and will set wd_enabled using a callback function. Signed-off-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-22x86: consolidate header guardsVegard Nossum
This patch is the result of an automatic script that consolidates the format of all the headers in include/asm-x86/. The format: 1. No leading underscore. Names with leading underscores are reserved. 2. Pathname components are separated by two underscores. So we can distinguish between mm_types.h and mm/types.h. 3. Everything except letters and numbers are turned into single underscores. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2008-07-08x86: nmi_watchdog - introduce nmi_watchdog_active() helperCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: nmi_watchdog - use NMI_NONE by defaultCyrill Gorcunov
There is no need to keep NMI_DISABLED definition and use it for nmi_watchdog by default. Here is the point why: - IO-APIC and APIC chips are programmed for nmi_watchdog support at very early stage of kernel booting and not having nmi_watchdog specified as boot option lead only to nmi_watchdog becomes to NMI_NONE anyway - enable nmi_watchdog thru /proc/sys/kernel/nmi if it was not specified at boot is not possible too (even having this sysfs entry) Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: macro@linux-mips.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'x86/nmi' into x86/develIngo Molnar
Conflicts: arch/x86/kernel/nmi.c arch/x86/kernel/nmi_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branches 'x86/numa-fixes', 'x86/apic', 'x86/apm', 'x86/bitops', ↵Ingo Molnar
'x86/build', 'x86/cleanups', 'x86/cpa', 'x86/cpu', 'x86/defconfig', 'x86/gart', 'x86/i8259', 'x86/intel', 'x86/irqstats', 'x86/kconfig', 'x86/ldt', 'x86/mce', 'x86/memtest', 'x86/pat', 'x86/ptemask', 'x86/resumetrace', 'x86/threadinfo', 'x86/timers', 'x86/vdso' and 'x86/xen' into x86/devel
2008-07-08x86: NMI watchdog: Downgrade helperMaciej W. Rozycki
A downgrade helper for the NMI watchdog to be used in all places where the I/O APIC watchdog may have been requested, but the I/O APIC is found not to be there or meant to be left disabled. This is so that the reconfiguration is cosistent and defined in a single place only. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12x86: remove obsolete PM definitions from NMI headerRafael J. Wysocki
Remove obsolete and no longer used PM-related definitions from include/asm-x86/nmi.h. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-05x86: nmi - consolidate nmi_watchdog_default for 32bit modeCyrill Gorcunov
64bit mode bootstrap code does set nmi_watchdog to NMI_NONE by default and doing the same on 32bit mode is safe too. Such an action saves us from several #ifdef. Btw, my previous commit commit 19ec673ced067316b9732bc6d1c4ff4052e5f795 Author: Cyrill Gorcunov <gorcunov@gmail.com> Date: Wed May 28 23:00:47 2008 +0400 x86: nmi - fix incorrect NMI watchdog used by default did not fix the problem completely, moreover it introduced additional bug - nmi_watchdog would be set to either NMI_LOCAL_APIC or NMI_IO_APIC _regardless_ to boot option if being enabled thru /proc/sys/kernel/nmi_watchdog. Sorry for that. Fix it too. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: macro@linux-mips.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-30- fix typo in include/asm-x86/nmi.hIngo Molnar
2008-05-28x86: nmi - fix incorrect NMI watchdog used by defaultCyrill Gorcunov
The commit commit 4b82b277707a39b97271439c475f186f63ec4692 Author: Cyrill Gorcunov <gorcunov@gmail.com> Date: Sat May 24 19:36:35 2008 +0400 set nmi_watchdog to NMI_IO_APIC as by default. This causes hangs on some machines with buggy watchdogs. Fix it - i.e. restore old behaviour. Thanks to Sitsofe Wheeler and Adrian Bunk for catching the problem and Maciej W. Rozycki for explanation what is going on there. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> CC: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: nmi_32.c - add nmi_watchdog_default helperCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: nmi - unify die_nmi() interfaceCyrill Gorcunov
By slightly changing 32bit mode die_nmi() we may unify the interface and make it common for both (32/64bit) modes Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: remove duplicate declaration of unknown_nmi_panicFernando Luis Vazquez Cao
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25x86: cleanup, remove duplicate declaration of unknown_nmi_panicFernando Luis Vazquez Cao
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: call nmi_watchdog_default in i386Glauber de Oliveira Costa
this does not exist, so it will be an empty macro Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: unify nmi_32.h and nmi_64.hGlauber de Oliveira Costa
Two more files goes away. nmi_64.h and nmi_32.h gives birth to nmi.h Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11i386/x86_64: move headers to include/asm-x86Thomas Gleixner
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>