aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86/pgtable-3level.h
AgeCommit message (Collapse)Author
2008-07-22x86: rename PTE_MASK to PTE_PFN_MASKJeremy Fitzhardinge
Rusty, in his peevish way, complained that macros defining constants should have a name which somewhat accurately reflects the actual purpose of the constant. Aside from the fact that PTE_MASK gives no clue as to what's actually being masked, and is misleadingly similar to the functionally entirely different PMD_MASK, PUD_MASK and PGD_MASK, I don't really see what the problem is. But if this patch silences the incessent noise, then it will have achieved its goal (TODO: write test-case). Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-20x86: use PTE_MASK in 32-bit PAEJeremy Fitzhardinge
Use PTE_MASK in 3-level pagetables (ie, 32-bit PAE). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Tested-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-17include/asm-x86/pgtable-3level.h: checkpatch cleanups - formatting onlyJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-04x86: update reference for PAE tlb flushingJeremy Fitzhardinge
Remove bogus reference to "Pentium-II erratum A13" and point to the actual canonical source of information about what requirements x86 processors have for PAE pagetable updates. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04x86: pud_clear: only reload cr3 if necessaryJeremy Fitzhardinge
Rather than unconditionally reloading cr3, only do so if the pud we're updating is within the active pgd. This eliminates TLB flushes most of the time. The performance-critical uses of pud_clear are during execve and exit, but in those cases cr3 is referring to some other pagetable. The only other use of pud_clear is during a large (1Gbyte+) munmap, and those are sufficiently rare that a couple of cr3 reloads won't hurt. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04x86: revert "defer cr3 reload when doing pud_clear()"Jeremy Fitzhardinge
Revert "defer cr3 reload when doing pud_clear()" since I'm going to replace it. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: defer cr3 reload when doing pud_clear()Jeremy Fitzhardinge
PAE mode requires that we reload cr3 in order to guarantee that changes to the pgd will be noticed by the processor. This means that in principle pud_clear needs to reload cr3 every time. However, because reloading cr3 implies a tlb flush, we want to avoid it where possible. pud_clear() is only used in a couple of places: - in free_pmd_range(), when pulling down a range of process address space, and - huge_pmd_unshare() In both cases, the calling code will do a a tlb flush anyway, so there's no need to do it within pud_clear(). In free_pmd_range(), the pud_clear is immediately followed by pmd_free_tlb(); we can hook that to make the mmu_gather do an unconditional full flush to make sure cr3 gets reloaded. In huge_pmd_unshare, it is followed by flush_tlb_range, which always results in a full cr3-reload tlb flush. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: William Irwin <wli@holomorphy.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: don't special-case pmd allocations as muchJeremy Fitzhardinge
In x86 PAE mode, stop treating pmds as a special case. Previously they were always allocated and freed with the pgd. The modifies the code to be the same as 64-bit mode, where they are allocated on demand. This is a step on the way to unifying 32/64-bit pagetable allocation as much as possible. There is a complicating wart, however. When you install a new reference to a pmd in the pgd, the processor isn't guaranteed to see it unless you reload cr3. Since reloading cr3 also has the side-effect of flushing the tlb, this is an expense that we want to avoid whereever possible. This patch simply avoids reloading cr3 unless the update is to the current pagetable. Later patches will optimise this further. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andi Kleen <ak@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: William Irwin <wli@holomorphy.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up pte_execAndi Kleen
- Rename it to pte_exec() from pte_exec_kernel(). There is nothing kernel specific in there. - Move it into the common file because _PAGE_NX is 0 on !PAE and then pte_exec() will be always evaluate to true. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: demacro asm-x86/pgalloc_32.hJeremy Fitzhardinge
Convert macros into inline functions, for better type-checking. This patch required a little bit of fiddling with headers in order to make __(pte|pmd)_free_tlb inline rather than macros. asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly use any pgalloc definitions. I removed this include to avoid an include cycle, but it may cause secondary compile failures by things depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one such place; there may be others. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify paravirt pagetable accessorsJeremy Fitzhardinge
Put all the defines for mapping pagetable operations to their native versions (for the non-paravirt case) into one place. Make the corresponding changes to paravirt.h. The tricky part here is that when a pagetable entry can't be updated atomically (ie, 32-bit PAE), we need special handlers for pte_clear, set_pte_atomic and set_pte_present. However, the other two modes don't need special handling for these, and can use a common set_pte(_at) path. [ mingo@elte.hu: fixes ] Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: pgtable: unify pte accessorsJeremy Fitzhardinge
Make various pte accessors common. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: page.h: make pte_t a union to always includeJeremy Fitzhardinge
Make sure pte_t, whatever its definition, has a pte element with type pteval_t. This allows common code to access it without needing to be specifically parameterised on what pagetable mode we're compiling for. For 32-bit, this means that pte_t becomes a union with "pte" and "{ pte_low, pte_high }" (PAE) or just "pte_low" (non-PAE). Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify pgtable accessors which useJeremy Fitzhardinge
Make users of supported_pte_mask common. This has the side-effect of introducing the variable for 32-bit non-PAE, but I think its a pretty small cost to simplify the code. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: mask NX from pte_pfnJeremy Fitzhardinge
In 32-bit PAE, mask NX from pte_pfn, since it isn't part of the PFN. This code is due for unification anyway, but this fixes a latent bug. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11i386/x86_64: move headers to include/asm-x86Thomas Gleixner
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>