aboutsummaryrefslogtreecommitdiff
path: root/include/drm
AgeCommit message (Collapse)Author
2009-09-21Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits) drm/vgaarb: add VGA arbitration support to the drm and kms. drm/radeon: some r420s have a CP race with the DMA engine. drm/radeon/r600/kms: rv670 is not DCE3 drm/radeon/kms: r420 idle after programming GA_ENHANCE drm/radeon/kms: more fixes to rv770 suspend/resume path. drm/radeon/kms: more alignment for rv770.c with r600.c drm/radeon/kms: rv770 blit init called too late. drm/radeon/kms: move around new init path code to avoid posting at init drm/radeon/r600: fix some issues with suspend/resume. drm/radeon/kms: disable VGA rendering engine before taking over VRAM drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init(). drm/radeon/kms: add initial connector properties drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian. drm/radeon/kms: don't fail if we fail to init GPU acceleration drm/r600/kms: fixup number of loops per blit calculation. drm/radeon/kms: reprogram format in set base. drm/radeon: avivo chips have no separate int bit for display drm/radeon/r600: don't do interrupts drm: fix _DRM_GEM addmap error message drm: update crtc x/y when only fb changes ... Fixed up trivial conflicts in firmware/Makefile due to network driver (cxgb3) and drm (mga/r128/radeon) firmware being listed next to each other.
2009-09-21drm/vgaarb: add VGA arbitration support to the drm and kms.Dave Airlie
VGA arb requires DRM support for non-kms drivers, to turn on/off irqs when disabling the mem/io regions. VGA arb requires KMS support for GPUs where we can turn off VGA decoding. Currently we know how to do this for intel and radeon kms drivers, which allows them to be removed from the arbiter. This patch comes from Fedora rawhide kernel. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-20includecheck fix: include/drm, drm_memory.hJaswinder Singh Rajput
fix the following 'make includecheck' warning: include/drm/drm_memory.h: linux/vmalloc.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247068169.4382.99.camel@ht.satnam> Acked-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.Michel Dänzer
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18drm/radeon/kms: don't fail if we fail to init GPU accelerationJerome Glisse
Userspace can query if acceleration is working or not true get info ioctl and could fallback to software if for some reason kernel failed to initialize KMS. This should allow to give a working KMS setup in all case (even with non functionning accel). Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08drm: include seq_file.h for debugfs builds.Dave Airlie
Fixes a warning seen on powerpc. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07Merge intel drm-intel-next branchDave Airlie
Merge remote branch 'anholt/drm-intel-next' of ../anholt-2.6 into drm-next Conflicts: drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h drivers/gpu/drm/i915/intel_sdvo.c
2009-09-07drm/kms: add a function that can add the mode for the output device without EDIDZhao Yakui
Add a function that can be used to add the default mode for the output device without EDID. It will add the default mode that meets with the requirements of given hdisplay/vdisplay limit. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/kms: add explicit encoder disable function and detach harder.Dave Airlie
For shared tv-out and VGA encoders, we really need to know if the encoder is just being switched off temporarily in blanking or if we are really disabling it hard. Also we need to try harder to disconnect encoders from unused connectors so we can share more efficently. (shared encoders stuff is coming in radeon tv-out support) Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02drm/mm: add ability to dump mm lists via debugfsDave Airlie
This adds code to the drm_mm to talk to debugfs, and adds support to radeon to add the VRAM and GTT mm lists to debugfs. I tested with spinlock debugging and it doesn't give out. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/kms: move driver specific fb common code to helper functions (v2)Dave Airlie
Initially I always meant this code to be shared, but things ran away from me before I got to it. This refactors the i915 and radeon kms fbdev interaction layers out into generic helpers + driver specific pieces. It moves all the panic/sysrq enhancements to the core file, and stores a linked list of kernel fbs. This could possibly be improved to only store the fb which has fbcon on it for panics etc. radeon retains some specific codes used for a big endian workaround. changes: fix oops in v1 fix freeing path for crtc_info Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31drm/crtc_helper: place drm_helper_encoder_in_use() in the header fileMaarten Maathuis
- The symbol was already exported. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm: GEM handles are u32, not intPekka Paalanen
Several functions in the GEM kernel API used int as handle type, but user API has it __u32 which is also the intended type. Replace int with u32. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27drm/ttm: consolidate cache flushing code in one place.Dave Airlie
This merges the TTM and drm cache flushing into one file in the drm core. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon: add GET_PARAM/INFO support for Z pipesAlex Deucher
Needed for occlusion queries on rv530 chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21drm/radeon/kms: implement the bo busy ioctl properly.Dave Airlie
The previous patch assumes the ioctl already existed, when it actually didn't. It also didn't return the correct error code. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-20Merge Linus master to drm-nextDave Airlie
linux-next conflict reported needed resolution. Conflicts: drivers/gpu/drm/drm_crtc.c drivers/gpu/drm/drm_edid.c drivers/gpu/drm/i915/intel_sdvo.c drivers/gpu/drm/radeon/radeon_ttm.c drivers/gpu/drm/ttm/ttm_bo.c
2009-08-19ttm: Make parts of a struct ttm_bo_device global.Thomas Hellstrom
Common resources, like memory accounting and swap lists should be global and not per device. Introduce a struct ttm_bo_global to accomodate this, and register it with sysfs. Add a small sysfs interface to return the number of active buffer objects. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm/ttm: Memory accounting rework.Thomas Hellstrom
Use inclusive zones to simplify accounting and its sysfs representation. Use DMA32 accounting where applicable. Add a sysfs interface to make the heuristically determined limits readable and configurable. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm: Enable drm drivers to add drm sysfs devices.Thomas Hellstrom
Export utility functions for drivers to add specialized devices in the sysfs drm class subdirectory. Initially this will be needed form TTM to add a virtual device that handles power management. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19drm/ttm: optimize bo_kmap_type valuesPekka Paalanen
A micro-optimization on the function ttm_kmap_obj_virtual(). By defining the values of enum ttm_bo_kmap_obj::bo_kmap_type to have a bit indicating iomem, size of the function ttm_kmap_obj_virtual() will be reduced by 16 bytes on x86_64 (gcc 4.1.2). ttm_kmap_obj_virtual() may be heavily used, when buffer objects are accessed via wrappers, that work for both kinds of memory addresses: iomem cookies and kernel virtual. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm/kms: no need to return void value (encoder)Pekka Paalanen
Cc: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm: clarify scaling property namesJesse Barnes
Now that we're using the scaling property in the Intel driver I noticed that the names were a bit confusing. I've corrected them according to our discussion on IRC and the mailing list, though I've left out potential new additions for a new scaling property with an integer (or two) for the scaling factor. None of the drivers implement that today, but if someone wants to do it, I think it could be done with the addition of a single new type and a new property to describe the scaling factor in the X and Y directions. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19drm: fixup includes in encoder slave header files.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-17drm/radeon/kms: implement bo busy check + current domainDave Airlie
This implements the busy ioctl along with a current domain check. returns 0 or -EBUSY puts the current domain no matter what the answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-13drm: Add more standard TV properties.Francisco Jerez
Overscan, saturation, hue. Used in the nouveau driver for GPUs with integrated TV encoders. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-05drm/radeon: Add support for RS880 chipsAlex Deucher
These are new AMD IGP chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Define some new standard TV properties.Francisco Jerez
Namely "brightness", "contrast" and "flicker reduction". Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Define DRM_MODE_SUBCONNECTOR_SCARTFrancisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Define DRM_MODE_CONNECTOR_TVFrancisco Jerez
The existing TV connector types are often unsuitable either because there is no way to probe them until they're actually plugged in or because they can change during run time (e.g. 7-pin DIN connectors that behave as S-Video, Component, Composite or SCART depending on the adaptor plugged in). Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm/kms: slave encoder interface.Francisco Jerez
Define some helper functions to make easier to detach a KMS encoder implementation from the drm module of the GPU it's used in. This is mainly useful for some external I2C encoders known to be present on cards with GPUs from several different manufacturers. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04DRM: Add the explanation about DRM debug levelZhao Yakui
Add the explanation about DRM debug level in the drmP header file. This is to explain how/where to use the different DRM debug level. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Remove the macro defintion of DRM_DEBUG_MODEZhao Yakui
Two macro definitions of DRM_DEBUG_KMS/MODE can be used to add the debug info related with KMS. It is confusing. So remove the macro definition of DRM_DEBUG_MODE. Instead it can be replaced by the DRM_DEBUG_KMS. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm: Remove the unused prefix in DRM_DEBUG_KMS/DRIVER/MODEZhao Yakui
We will have to add a prefix when using the macro defintion of DRM_DEBUG_KMS /DRM_DEBUG_DRIVER/MODE. It is not convenient. We should use the DRM_NAME as default prefix. So remove the prefix in the macro definition of DRM_DEBUG_KMS/DRIVER/MODE. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04drm/radeon: add some new r7xx pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-29Merge branch 'drm-radeon-kms' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits) drm/radeon: set fb aperture sizes for framebuffer handoff. drm/ttm: fix highuser vs dma32 confusion. drm/radeon: Fix size used for benchmarking BO copies. drm/radeon: Add radeon.test parameter for running BO GPU copy tests. drm/radeon/kms: allow interruptible waits for objects. drm/ttm: powerpc: Fix Highmem cache flushing. x86: Export kmap_atomic_prot() needed for TTM. drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes. drm/ttm: Fix an oops and sync object leak. drm/radeon/kms: vram sizing on certain r100 chips needs workaround. drm/radeon: Pay more attention to object placement requested by userspace. drm/radeon: Fall back to evicting BOs with memcpy if necessary. drm/radeon: Don't unreserve twice on failure to validate. drm/radeon/kms: fix bandwidth computation on avivo hardware drm/radeon/kms: add initial colortiling support. drm/radeon/kms: fix hotspot handling on pre-avivo chips drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740 drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq drm/radeon/kms: block RN50 from using 3D engine. drm/radeon/kms: fix VRAM sizing like DDX does it. ...
2009-07-29drm/radeon/kms: add initial colortiling support.Dave Airlie
This adds new set/get tiling interfaces where the pitch and macro/micro tiling enables can be set. Along with a flag to decide if this object should have a surface when mapped. The only thing we need to allocate with a mapped surface should be the frontbuffer. Note rotate scanout shouldn't require one, and back/depth shouldn't either, though mesa needs some fixes. It fixes the TTM interfaces along Thomas's suggestions, and I've tested the surface stealing code with two X servers and not seen any lockdep issues. I've stopped tiling the fbcon frontbuffer, as I don't see there being any advantage other than testing, I've left the testing commands in there, just flip the fb_tiled to true in radeon_fb.c Open: Can we integrate endian swapping in with this? Future features: texture tiling - need to relocate texture registers TXOFFSET* with tiling info. This also merges Michel's cleanup surfaces regs at init time patch even though it makes sense on its own, this patch really relies on it. Some PowerMac firmwares set up a tiling surface at the beginning of VRAM which messes us up otherwise. that patch is: Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15drm/ttm/radeon: add dma32 support.Dave Airlie
This add support for using dma32 memory on gpus that really need it. Currently IGPs are left without DMA32 but we might need to change that unless we can fix rs690. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15ttm: Make messages more readable.Thomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15drm/mode: add the GTF algorithm in kernel spaceZhao Yakui
Add the GTF algorithm in kernel space. And this function can be called to generate the required modeline. I copied it from the file of xserver/hw/xfree86/modes/xf86gtf.c. What I have done is to translate it by using integer calculation. This is to avoid the float-point calculation in kernel space. At the same tie I also refer to the function of fb_get_mode in drivers/video/fbmon.c Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15drm/mode: add the CVT algorithm in kernel spaceZhao Yakui
Add the CVT algorithm in kernel space. And this function can be called to generate the required modeline. I copied it from the file of xserver/hw/xfree86/modes/xf86cvt.c. What I have done is to translate it by using integer calculation. This is to avoid the float-point calculation in kernel space. [airlied:- cleaned up some bits] Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15drm/radeon: add some missing pci idsAlex Deucher
Also, fix ordering for a couple others Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-24drm: Fix shifts which were miscalculated when converting from bitfields.Michel Dänzer
Looks like I managed to mess up most shifts when converting from bitfields. :( The patch below works on my Thinkpad T500 (as well as on my PowerBook, where the previous change worked as well, maybe out of luck...). I'd appreciate more testing and eyes looking over it though. Signed-off-by: Michel Dänzer <daenzer@vmware.com> Tested-by: Michael Pyne <mpyne@kde.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-19drm: EDID endianness fixes.Michel Dänzer
Mostly replacing bitfields with explicit masks and shifts. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-19drm: Apply "Memory fragmentation from lost alignment blocks"Thomas Hellstrom
also for the atomic path by using a common code-path. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-18drm: Remove memory debugging infrastructure.Eric Anholt
It hasn't been used in ages, and having the user tell your how much memory is being freed at free time is a recipe for disaster even if it was ever used. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-16Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: switch to using late_initcall radeon legacy chips: tv dac bg/dac adj updates drm/radeon: introduce kernel modesetting for radeon hardware drm: Add the TTM GPU memory manager subsystem. drm: Memory fragmentation from lost alignment blocks drm/radeon: fix mobility flags on new PCI IDs.
2009-06-15drm/radeon: introduce kernel modesetting for radeon hardwareJerome Glisse
Add kernel modesetting support to radeon driver, use the ttm memory manager to manage memory and DRM/GEM to provide userspace API. In order to avoid backward compatibility issue and to allow clean design and code the radeon kernel modesetting use different code path than old radeon/drm driver. When kernel modesetting is enabled the IOCTL of radeon/drm driver are considered as invalid and an error message is printed in the log and they return failure. KMS enabled userspace will use new API to talk with the radeon/drm driver. The new API provide functions to create/destroy/share/mmap buffer object which are then managed by the kernel memory manager (here TTM). In order to submit command to the GPU the userspace provide a buffer holding the command stream, along this buffer userspace have to provide a list of buffer object used by the command stream. The kernel radeon driver will then place buffer in GPU accessible memory and will update command stream to reflect the position of the different buffers. The kernel will also perform security check on command stream provided by the user, we want to catch and forbid any illegal use of the GPU such as DMA into random system memory or into memory not owned by the process supplying the command stream. This part of the code is still incomplete and this why we propose that patch as a staging driver addition, future security might forbid current experimental userspace to run. This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX (radeon up to X1950). Works is underway to provide support for R6XX, R7XX and newer hardware (radeon from HD2XXX to HD4XXX). Authors: Jerome Glisse <jglisse@redhat.com> Dave Airlie <airlied@redhat.com> Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15drm: Add the TTM GPU memory manager subsystem.Thomas Hellstrom
TTM is a GPU memory manager subsystem designed for use with GPU devices with various memory types (On-card VRAM, AGP, PCI apertures etc.). It's essentially a helper library that assists the DRM driver in creating and managing persistent buffer objects. TTM manages placement of data and CPU map setup and teardown on data movement. It can also optionally manage synchronization of data on a per-buffer-object level. TTM takes care to provide an always valid virtual user-space address to a buffer object which makes user-space sub-allocation of big buffer objects feasible. TTM uses a fine-grained per buffer-object locking scheme, taking care to release all relevant locks when waiting for the GPU. Although this implies some locking overhead, it's probably a big win for devices with multiple command submission mechanisms, since the lock contention will be minimal. TTM can be used with whatever user-space interface the driver chooses, including GEM. It's used by the upcoming Radeon KMS DRM driver and is also the GPU memory management core of various new experimental DRM drivers. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15drm/radeon: fix mobility flags on new PCI IDs.Dave Airlie
These aren't used that much on r600, but may be needed in the future, so get them correct now. Signed-off-by: Dave Airlie <airlied@redhat.com>