aboutsummaryrefslogtreecommitdiff
path: root/include/linux/fs.h
AgeCommit message (Collapse)Author
2005-11-09[PATCH] add a file_permission helperChristoph Hellwig
A few more callers of permission() just want to check for a different access pattern on an already open file. This patch adds a wrapper for permission() that takes a file in preparation of per-mount read-only support and to clean up the callers a little. The helper is not intended for new code, everything without the interface set in stone should use vfs_permission() Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] add a vfs_permission helperChristoph Hellwig
Most permission() calls have a struct nameidata * available. This helper takes that as an argument and thus makes sure we pass it down for lookup intents and prepares for per-mount read-only support where we need a struct vfsmount for checking whether a file is writeable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] unbindable mountsRam Pai
An unbindable mount does not forward or receive propagation. Also unbindable mount disallows bind mounts. The semantics is as follows. Bind semantics: It is invalid to bind mount an unbindable mount. Move semantics: It is invalid to move an unbindable mount under shared mount. Clone-namespace semantics: If a mount is unbindable in the parent namespace, the corresponding cloned mount in the child namespace becomes unbindable too. Note: there is subtle difference, unbindable mounts cannot be bind mounted but can be cloned during clone-namespace. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] introduce slave mountsRam Pai
A slave mount always has a master mount from which it receives mount/umount events. Unlike shared mount the event propagation does not flow from the slave mount to the master. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] shared mounts handling: umountRam Pai
An unmount of a mount creates a umount event on the parent. If the parent is a shared mount, it gets propagated to all mounts in the peer group. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] shared mount handling: bind and rbindRam Pai
Implement handling of MS_BIND in presense of shared mounts (see Documentation/sharedsubtree.txt in the end of patch series for detailed description). Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] introduce shared mountsRam Pai
This creates shared mounts. A shared mount when bind-mounted to some mountpoint, propagates mount/umount events to each other. All the shared mounts that propagate events to each other belong to the same peer-group. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] beginning of the shared-subtree properRam Pai
A private mount does not forward or receive propagation. This patch provides user the ability to convert any mount to private. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] kernel-doc: fix some kernel-api warningsRandy Dunlap
Fix various warnings in kernel-doc: Warning(linux-2614-rc4//include/linux/net.h:89): Enum value 'SOCK_DCCP' not described in enum 'sock_type' usercopy.c: should use !E instead of !I for exported symbols: Warning(linux-2614-rc4//arch/i386/lib/usercopy.c): no structured comments found fs.h does not need to use !E since it has no exported symbols: Warning(linux-2614-rc4//include/linux/fs.h:1182): No description found for parameter 'find_exported_dentry' Warning(linux-2614-rc4//include/linux/fs.h): no structured comments found irq/manage.c should use !E for its exported symbols: Warning(linux-2614-rc4//kernel/irq/manage.c): no structured comments found macmodes.c should use !E for its exported symbols: Warning(linux-2614-rc4//drivers/video/macmodes.c): no structured comments found Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] VFS: pass file pointer to filesystem from ftruncate()Miklos Szeredi
This patch extends the iattr structure with a file pointer memeber, and adds an ATTR_FILE validity flag for this member. This is set if do_truncate() is invoked from ftruncate() or from do_coredump(). The change is source and binary compatible. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] reduce sizeof(struct file)Eric Dumazet
Now that RCU applied on 'struct file' seems stable, we can place f_rcuhead in a memory location that is not anymore used at call_rcu(&f->f_rcuhead, file_free_rcu) time, to reduce the size of this critical kernel object. The trick I used is to move f_rcuhead and f_list in an union called f_u The callers are changed so that f_rcuhead becomes f_u.fu_rcuhead and f_list becomes f_u.f_list Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] gfp_t: fs/*Al Viro
- ->releasepage() annotated (s/int/gfp_t), instances updated - missing gfp_t in fs/* added - fixed misannotation from the original sweep caught by bitwise checks: XFS used __nocast both for gfp_t and for flags used by XFS allocator. The latter left with unsigned int __nocast; we might want to add a different type for those but for now let's leave them alone. That, BTW, is a case when __nocast use had been actively confusing - it had been used in the same code for two different and similar types, with no way to catch misuses. Switch of gfp_t to bitwise had caught that immediately... One tricky bit is left alone to be dealt with later - mapping->flags is a mix of gfp_t and error indications. Left alone for now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] mm/filemap.c: make two functions staticAdrian Bunk
With Nick Piggin <npiggin@suse.de> Give some things static scope. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] files: files struct with RCUDipankar Sarma
Patch to eliminate struct files_struct.file_lock spinlock on the reader side and use rcu refcounting rcuref_xxx api for the f_count refcounter. The updates to the fdtable are done by allocating a new fdtable structure and setting files->fdt to point to the new structure. The fdtable structure is protected by RCU thereby allowing lock-free lookup. For fd arrays/sets that are vmalloced, we use keventd to free them since RCU callbacks can't sleep. A global list of fdtable to be freed is not scalable, so we use a per-cpu list. If keventd is already handling the current cpu's work, we use a timer to defer queueing of that work. Since the last publication, this patch has been re-written to avoid using explicit memory barriers and use rcu_assign_pointer(), rcu_dereference() premitives instead. This required that the fd information is kept in a separate structure (fdtable) and updated atomically. Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] Make ll_rw_block() wait for buffer lockJan Kara
Introduce new ll_rw_block() operation SWRITE meaning that block layer should wait for the buffer lock and write-out afterwards. Hence data in buffers at the time of call are guaranteed to be submitted to the disk. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] remove duplicated sys_open32() code from 64bit archsMiklos Szeredi
64 bit architectures all implement their own compatibility sys_open(), when in fact the difference is simply not forcing the O_LARGEFILE flag. So use the a common function instead. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] remove iattr.ia_attr_flagsMiklos Szeredi
Remove unused ia_attr_flags from struct iattr, and related defines. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] remove file.f_maxcountEric Dumazet
struct file cleanup: f_maxcount has an unique value (INT_MAX). Just use the hard-wired value. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-19Fix nasty ncpfs symlink handling bug.Linus Torvalds
This bug could cause oopses and page state corruption, because ncpfs used the generic page-cache symlink handlign functions. But those functions only work if the page cache is guaranteed to be "stable", ie a page that was installed when the symlink walk was started has to still be installed in the page cache at the end of the walk. We could have fixed ncpfs to not use the generic helper routines, but it is in many ways much cleaner to instead improve on the symlink walking helper routines so that they don't require that absolute stability. We do this by allowing "follow_link()" to return a error-pointer as a cookie, which is fed back to the cleanup "put_link()" routine. This also simplifies NFS symlink handling. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] stale POSIX lock handlingPeter Staubach
I believe that there is a problem with the handling of POSIX locks, which the attached patch should address. The problem appears to be a race between fcntl(2) and close(2). A multithreaded application could close a file descriptor at the same time as it is trying to acquire a lock using the same file descriptor. I would suggest that that multithreaded application is not providing the proper synchronization for itself, but the OS should still behave correctly. SUS3 (Single UNIX Specification Version 3, read: POSIX) indicates that when a file descriptor is closed, that all POSIX locks on the file, owned by the process which closed the file descriptor, should be released. The trick here is when those locks are released. The current code releases all locks which exist when close is processing, but any locks in progress are handled when the last reference to the open file is released. There are three cases to consider. One is the simple case, a multithreaded (mt) process has a file open and races to close it and acquire a lock on it. In this case, the close will release one reference to the open file and when the fcntl is done, it will release the other reference. For this situation, no locks should exist on the file when both the close and fcntl operations are done. The current system will handle this case because the last reference to the open file is being released. The second case is when the mt process has dup(2)'d the file descriptor. The close will release one reference to the file and the fcntl, when done, will release another, but there will still be at least one more reference to the open file. One could argue that the existence of a lock on the file after the close has completed is okay, because it was acquired after the close operation and there is still a way for the application to release the lock on the file, using an existing file descriptor. The third case is when the mt process has forked, after opening the file and either before or after becoming an mt process. In this case, each process would hold a reference to the open file. For each process, this degenerates to first case above. However, the lock continues to exist until both processes have released their references to the open file. This lock could block other lock requests. The changes to release the lock when the last reference to the open file aren't quite right because they would allow the lock to exist as long as there was a reference to the open file. This is too long. The new proposed solution is to add support in the fcntl code path to detect a race with close and then to release the lock which was just acquired when such as race is detected. This causes locks to be released in a timely fashion and for the system to conform to the POSIX semantic specification. This was tested by instrumenting a kernel to detect the handling locks and then running a program which generates case #3 above. A dangling lock could be reliably generated. When the changes to detect the close/fcntl race were added, a dangling lock could no longer be generated. Cc: Matthew Wilcox <willy@debian.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13[PATCH] Fix soft lockup due to NTFS: VFS part and explanationAnton Altaparmakov
Something has changed in the core kernel such that we now get concurrent inode write outs, one e.g via pdflush and one via sys_sync or whatever. This causes a nasty deadlock in ntfs. The only clean solution unfortunately requires a minor vfs api extension. First the deadlock analysis: Prerequisive knowledge: NTFS has a file $MFT (inode 0) loaded at mount time. The NTFS driver uses the page cache for storing the file contents as usual. More interestingly this file contains the table of on-disk inodes as a sequence of MFT_RECORDs. Thus NTFS driver accesses the on-disk inodes by accessing the MFT_RECORDs in the page cache pages of the loaded inode $MFT. The situation: VFS inode X on a mounted ntfs volume is dirty. For same inode X, the ntfs_inode is dirty and thus corresponding on-disk inode, which is as explained above in a dirty PAGE_CACHE_PAGE belonging to the table of inodes ($MFT, inode 0). What happens: Process 1: sys_sync()/umount()/whatever... calls __sync_single_inode() for $MFT -> do_writepages() -> write_page for the dirty page containing the on-disk inode X, the page is now locked -> ntfs_write_mst_block() which clears PageUptodate() on the page to prevent anyone else getting hold of it whilst it does the write out (this is necessary as the on-disk inode needs "fixups" applied before the write to disk which are removed again after the write and PageUptodate is then set again). It then analyses the page looking for dirty on-disk inodes and when it finds one it calls ntfs_may_write_mft_record() to see if it is safe to write this on-disk inode. This then calls ilookup5() to check if the corresponding VFS inode is in icache(). This in turn calls ifind() which waits on the inode lock via wait_on_inode whilst holding the global inode_lock. Process 2: pdflush results in a call to __sync_single_inode for the same VFS inode X on the ntfs volume. This locks the inode (I_LOCK) then calls write-inode -> ntfs_write_inode -> map_mft_record() -> read_cache_page() of the page (in page cache of table of inodes $MFT, inode 0) containing the on-disk inode. This page has PageUptodate() clear because of Process 1 (see above) so read_cache_page() blocks when tries to take the page lock for the page so it can call ntfs_read_page(). Thus Process 1 is holding the page lock on the page containing the on-disk inode X and it is waiting on the inode X to be unlocked in ifind() so it can write the page out and then unlock the page. And Process 2 is holding the inode lock on inode X and is waiting for the page to be unlocked so it can call ntfs_readpage() or discover that Process 1 set PageUptodate() again and use the page. Thus we have a deadlock due to ifind() waiting on the inode lock. The only sensible solution: NTFS does not care whether the VFS inode is locked or not when it calls ilookup5() (it doesn't use the VFS inode at all, it just uses it to find the corresponding ntfs_inode which is of course attached to the VFS inode (both are one single struct); and it uses the ntfs_inode which is subject to its own locking so I_LOCK is irrelevant) hence we want a modified ilookup5_nowait() which is the same as ilookup5() but it does not wait on the inode lock. Without such functionality I would have to keep my own ntfs_inode cache in the NTFS driver just so I can find ntfs_inodes independent of their VFS inodes which would be slow, memory and cpu cycle wasting, and incredibly stupid given the icache already exists in the VFS. Below is a patch that does the ilookup5_nowait() implementation in fs/inode.c and exports it. ilookup5_nowait.diff: Introduce ilookup5_nowait() which is basically the same as ilookup5() but it does not wait on the inode's lock (i.e. it omits the wait_on_inode() done in ifind()). This is needed to avoid a nasty deadlock in NTFS. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] inotifyRobert Love
inotify is intended to correct the deficiencies of dnotify, particularly its inability to scale and its terrible user interface: * dnotify requires the opening of one fd per each directory that you intend to watch. This quickly results in too many open files and pins removable media, preventing unmount. * dnotify is directory-based. You only learn about changes to directories. Sure, a change to a file in a directory affects the directory, but you are then forced to keep a cache of stat structures. * dnotify's interface to user-space is awful. Signals? inotify provides a more usable, simple, powerful solution to file change notification: * inotify's interface is a system call that returns a fd, not SIGIO. You get a single fd, which is select()-able. * inotify has an event that says "the filesystem that the item you were watching is on was unmounted." * inotify can watch directories or files. Inotify is currently used by Beagle (a desktop search infrastructure), Gamin (a FAM replacement), and other projects. See Documentation/filesystems/inotify.txt. Signed-off-by: Robert Love <rml@novell.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] export generic_drop_inode() to modulesMark Fasheh
OCFS2 wants to mark an inode which has been orphaned by another node so that during final iput it takes the correct path through the VFS and can pass through the OCFS2 delete_inode callback. Since i_nlink can get out of date with other nodes, the best way I see to accomplish this is by clearing i_nlink on those inodes at drop_inode time. Other than this small amount of work, nothing different needs to happen, so I think it would be cleanest to be able to just call generic_drop_inode at the end of the OCFS2 drop_inode callback. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27[PATCH] Update cfq io scheduler to time sliced designJens Axboe
This updates the CFQ io scheduler to the new time sliced design (cfq v3). It provides full process fairness, while giving excellent aggregate system throughput even for many competing processes. It supports io priorities, either inherited from the cpu nice value or set directly with the ioprio_get/set syscalls. The latter closely mimic set/getpriority. This import is based on my latest from -mm. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] xip: reduce code duplicationCarsten Otte
This patch reworks filemap_xip.c with the goal to reduce code duplication from mm/filemap.c. It applies agains 2.6.12-rc6-mm1. Instead of implementing the aio functions, this one implements the synchronous read/write functions only. For readv and writev, the generic fallback is used. For aio, we rely on the application doing the fallback. Since our "synchronous" function does memcpy immediately anyway, there is no performance difference between using the fallbacks or implementing each operation. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] xip: ext2: execute in placeCarsten Otte
These are the ext2 related parts. Ext2 now uses the xip_* file operations along with the get_xip_page aop when mounted with -o xip. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] xip: fs/mm: execute in placeCarsten Otte
- generic_file* file operations do no longer have a xip/non-xip split - filemap_xip.c implements a new set of fops that require get_xip_page aop to work proper. all new fops are exported GPL-only (don't like to see whatever code use those except GPL modules) - __xip_unmap now uses page_check_address, which is no longer static in rmap.c, and defined in linux/rmap.h - mm/filemap.h is now much more clean, plainly having just Linus' inline funcs moved here from filemap.c - fix includes in filemap_xip to make it build cleanly on i386 Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] xip: bdev: execute in placeCarsten Otte
This is the block device related part. The block device operation direct_access now has a struct block_device as first parameter. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] pass iocb to dio_iodone_tChristoph Hellwig
XFS will have to look at iocb->private to fix aio+dio. No other filesystem is using the blockdev_direct_IO* end_io callback. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] Remove f_error field from struct fileChristoph Lameter
The following patch removes the f_error field and all checks of f_error. Trond said: f_error was introduced for NFS, and made sense when we were guaranteed always to have a file pointer around when write errors occurred. Since then, we have (for various reasons) had to introduce the nfs_open_context in order to track the file read/write state, and it made sense to move our f_error tracking there too. Signed-off-by: Christoph Lameter <christoph@lameter.com> Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] block: add unlocked_ioctl support for block devicesArnd Bergmann
This patch allows block device drivers to convert their ioctl functions to unlocked_ioctl() like character devices and other subsystems. All functions that were called with the BKL held before are still used that way, but I would not be surprised if it could be removed from the ioctl functions in drivers/block/ioctl.c themselves. As a side note, I found that compat_blkdev_ioctl() acquires the BKL as well, which looks like a bug. I have checked that every user of disk->fops->compat_ioctl() in the current git tree gets the BKL itself, so it could easily be removed from compat_blkdev_ioctl(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] fix for prune_icache()/forced final iput() racesAlexander Viro
Based on analysis and a patch from Russ Weight <rweight@us.ibm.com> There is a race condition that can occur if an inode is allocated and then released (using iput) during the ->fill_super functions. The race condition is between kswapd and mount. For most filesystems this can only happen in an error path when kswapd is running concurrently. For isofs, however, the error can occur in a more common code path (which is how the bug was found). The logic here is "we want final iput() to free inode *now* instead of letting it sit in cache if fs is going down or had not quite come up". The problem is with kswapd seeing such inodes in the middle of being killed and happily taking over. The clean solution would be to tell kswapd to leave those inodes alone and let our final iput deal with them. I.e. add a new flag (I_FORCED_FREEING), set it before write_inode_now() there and make prune_icache() leave those alone. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22[PATCH] NFSv4: Clean up nfs4 lock state accountingTrond Myklebust
Ensure that lock owner structures are not released prematurely. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-20[PATCH] libfs: add simple attribute filesArnd Bergmann
Based on the discussion about spufs attributes, this is my suggestion for a more generic attribute file support that can be used by both debugfs and spufs. Simple attribute files behave similarly to sequential files from a kernel programmers perspective in that a standard set of file operations is provided and only an open operation needs to be written that registers file specific get() and set() functions. These operations are defined as void foo_set(void *data, u64 val); and u64 foo_get(void *data); where data is the inode->u.generic_ip pointer of the file and the operations just need to make send of that pointer. The infrastructure makes sure this works correctly with concurrent access and partial read calls. A macro named DEFINE_SIMPLE_ATTRIBUTE is provided to further simplify using the attributes. This patch already contains the changes for debugfs to use attributes for its internal file operations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-05[PATCH] remove do_sync parameter from __invalidate_deviceChristoph Hellwig
The only caller that ever sets it can call fsync_bdev itself easily. Also update some comments. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] DocBook: fix some descriptionsMartin Waitz
Some KernelDoc descriptions are updated to match the current code. No code changes. Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] DocBook: changes and extensions to the kernel documentationPavel Pisa
I have recompiled Linux kernel 2.6.11.5 documentation for me and our university students again. The documentation could be extended for more sources which are equipped by structured comments for recent 2.6 kernels. I have tried to proceed with that task. I have done that more times from 2.6.0 time and it gets boring to do same changes again and again. Linux kernel compiles after changes for i386 and ARM targets. I have added references to some more files into kernel-api book, I have added some section names as well. So please, check that changes do not break something and that categories are not too much skewed. I have changed kernel-doc to accept "fastcall" and "asmlinkage" words reserved by kernel convention. Most of the other changes are modifications in the comments to make kernel-doc happy, accept some parameters description and do not bail out on errors. Changed <pid> to @pid in the description, moved some #ifdef before comments to correct function to comments bindings, etc. You can see result of the modified documentation build at http://cmp.felk.cvut.cz/~pisa/linux/lkdb-2.6.11.tar.gz Some more sources are ready to be included into kernel-doc generated documentation. Sources has been added into kernel-api for now. Some more section names added and probably some more chaos introduced as result of quick cleanup work. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!