| Age | Commit message (Collapse) | Author |
|---|
|
Commit 8006479c9b75fb6594a7b746af3d7f1fbb68f18f introduced a spinlock in
input_dev->event_lock, which is locked when handling input events.
However, the hid-pidff driver sleeps when handling events as it waits for
reports being sent to the device before changing the report contents
again.
This causes a system lockup when trying to use force feedback with a PID
device, a regression introduced in 2.6.24 and 2.6.23.15.
Fix it by extracting the raw report data from struct hid_report
immediately when hid_submit_report() is called, therefore allowing
drivers to change the contents of struct hid_report immediately without
affecting the already-queued transfer.
In hid-pidff, re-add the removed usbhid_wait_io() to
pidff_erase_effect() instead, to prevent a full report queue from causing
the submission to fail, thus not freeing up device memory.
pidff_erase_effect() is not called while dev->event_lock is held.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
hid-ff.c now calls only pidff (generic driver), the special ones are now
in separate drivers. Invoke pidff on all non-special directly.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move the force feedback processing into a separate module.
[jkosina@suse.cz: fix Kconfig texts a little bit]
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Merge the logitech force feedback processing directly into logitech
driver from the usbhid core.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move the handling of the leds resetting from the core to
the dell and logitech drivers.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Remove support for both dynamic and static report descriptor
quirks. There is no longer rdesc code which it would support,
so it's useless.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Remove the file since these is no user now.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move them from the core code to a separate driver.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add compat option to hid code to allow loading of all modules on
systems which don't allow autoloading because of old userspace.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move them from the core code to a separate driver.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Move them from the core and input code to a separate driver.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This mapping are currently used on 2 placces and will be needed by more
quirk drivers, so move them to hid.h to allow them to use it.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
to allow hooks/fixes between them
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.
It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.
Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Generate aliases for hid device modules to support autoloading.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This adds a hid usage that is reported by the N-Trig digitizer in the Dell
Latitude XT screen.
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Since 2.6.25 the HID_QUIRK_APPLE_HAS_FN quirk is enabled even for
non-laptop Apple keyboards of the Aluminium series. The USB version of
these don't need Numlock emulation, like the laptop (and Aluminium
Wireless) do, as they have a proper keypad.
This patch splits the Numlock emulation for Apple keyboards in a
different quirk flag, so that it can be enabled for all the keyboards
but the Aluminium USB ones.
If the Numlock emulation is enabled for Aluminium USB keyboards, the
JKL and UIO keys become the numeric pad, and the rest of the keyboard
is disabled, included the key used to disable Numlock.
Additionally, these keyboard should not have a Numlock at all, as the
Numlock key is instead replaced by the 'Clear' key as usual for Apple
USB keyboards.
Signed-off-by: Diego 'Flameeyes' Petteno <flameeyes@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
usb_control_msg() converts arguments to little-endian itself,
doing that in caller means breakage on big-endian boxen.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a window:
task A task B
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
usb_set_intfdata(intf, NULL);
spin_unlock_irq(&usbhid->inlock);
usb_kill_urb(usbhid->urbin);
usb_kill_urb(usbhid->urbout);
usb_kill_urb(usbhid->urbctrl);
del_timer_sync(&usbhid->io_retry);
cancel_work_sync(&usbhid->reset_work);
if (!hid->open++) {
res = usb_autopm_get_interface(usbhid->intf);
if (res < 0) {
hid->open--;
return -EIO;
}
}
if (hid_start_in(hid))
if (hid->claimed & HID_CLAIMED_INPUT)
hidinput_disconnect(hid);
in which an open() to an already disconnected device will submit an URB
to an undead device. In case disconnect() was called by an ioctl, this'll
oops. Fix by introducing a new flag and checking it in hid_start_in().
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch makes the following needlessly global functions static:
- hid-core.c:hid_input_field()
- usbhid/hid-quirks.c:usbhid_modify_dquirk()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add force feedback support for Logitech Rumblepad 2.
Tested-By: Edgar Simo <bobbens@gmail.com>
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Since only place where this is used is usbhid, move it there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
To check paramters even if debug is disabled, convert dbg_hid
to inline function with __attribute__(format) checking.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This device has reports lower logical maximum compared to the real
usages for Zoom+ and Zoom- it emits.
This patch bumps the values in the report descriptor up, and also
adjusts HID_MAX_USAGE accordingly.
Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Microsoft's wireless desktop receiver (Model 1028) has a bug in the report
descriptor -- namely, in four seperate places it uses USAGE_MIN and _MAX when
it quite obviously doesn't intend to.
In other words, it reports that it has pretty much _everything_ in 'consumer'
and 'generic desktop'. And then the X evdev driver believes I have a mouse
with 36 absolute axes and a huge pile of keys and buttons, when I in fact,
should have zero. 255/256 in three of the cases, and 0-1024 in another.
This patch fixes the report descriptor of this device before it enters the HID
parser.
Signed-off-by: Jim Duchek <jim.duchek@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Many vendors highspeed devices give erroneously fullspeed interval value in
endpoint descriptor for interrupt endpoints. This quirk fixes up that by
recalculating the right value for highspeed device.
At the time of hid configuration this quirk calculates which highspeed interval
value gives same interval delay as, or next smaller then, what it would be if
the original value would be interpreted as fullspeed value. In subsequent urbs
that new value is used instead.
Forming the 'hid->name' in usb_hid_config() was moved up to accommodate more
descriptive printk reporting the fixup.
In this patch the quirk is set for one such device: Afatech DVB-T 2 infrared
HID-keyboard. It reports value 16 which means 4,069s in highspeed while
obviously 16ms was intended. In this case quirk calculates new value to be 8
which gives when interpreted as highspeed value 16ms as wanted. The behavior of
the device was verified to be what expected both before and after the patch.
Signed-off-by: Pekka Sarnila <sarnila@adit.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The old code (before move) stopped further processing of the
event after it has been already processed by the quirk handler.
The new code didn't propagate the return value properly, and
therefore the processing always proceeded, which was wrong.
This patch fixes it. Pointed out in kernel.org bugzilla #9842
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the
report descriptor from the remote contains a 48 bit HID report field. HID 1.11
states: Fields may span at most 4 bytes.
This patch, based on 2.6.23, fixes this by modifying the internal report
descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is
required to fetch the information from the hiddev interface.
The burden to reconstruct the data is moved into userspace (lirc through hiddev).
There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output
applications, which trigger the creation of hiddev device automatically.
Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fix a panic, by changing
hidinput_mapping_quirks(,, unsigned long *bit,)
to
hidinput_mapping_quirks(,, unsigned long **bit,)
The `bit' in this function is an out parameter.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This removes ugly macros IS_* to distinguish devices that
need special handling in hid-input, and establish proper
quirks for them.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
BTC 8193 keyboard handles its scrollwheel in very non-standard way.
It produces two non-standard usages for scrolling up and down, in
both cases with postive value equaling to 1. We handle this by temporary
mapping, which we then catch in quirk event handler, and remap to
negative HWHEEL even in order to introduce correct behavior.
Also the button requires special mapping, as it triggers standard-violating
usage code.
Reported in kernel.org bugzilla #9385
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This patch separates also the hid-input quirks that have to be
applied at the time the event occurs, so that the generic code
handling HUT-compliant devices is not messed up by them too much.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Currently, the handling of mapping between hid and input for devices
that don't conform to HUT 1.12 specification is very messy -- no per-device
handling, no blacklists, conditions on idVendor and idProduct placed
all over the code.
This patch moves all the device-specific input mapping to a separate
file, and introduces a blacklist-style handling for non-standard
device-specific mappings.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Genius KB-29E has broken report descriptor, which causes some of the
Consumer usages to appear incorrectly as Button usages. We fix it by
fixing the report descriptor before it is being parsed.
Also a few of the keys violate the HUT standard, so they need a special
handling. They currently fall into "Reserved" range as per HUT 1.12.
Reported-by: Szekeres Istvan <szekeres@iii.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This mouse distinguishes horizontal wheel from vertical by a special "pseudo
event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal
wheel. Because this event is supplied by the parser too late, we need to delay
a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to
input depending on the event value.
Signed-off-by: Pavel Troller <patrol@sinus.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Preserve identifiers exposed in build and run time configuration though in
order not to break existing configurations.
This is in preparation for adding support for Apple aluminum USB keyboards.
Signed-off-by: Michel Daenzer <michel@tungstengraphics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
