aboutsummaryrefslogtreecommitdiff
path: root/include/linux/if_vlan.h
AgeCommit message (Collapse)Author
2009-01-06vlan: Add GRO interfacesHerbert Xu
This patch adds GRO interfaces for hardware-assisted VLAN reception. With this in place we're now at parity with LRO as far as the interface is concerned. That is, you can now take any LRO driver and convert it over to GRO. As the CB memory clashes with GRO's use of CB, I've removed it entirely by storing dev in skb->dev. This is OK because VLAN gets called first thing in netif_receive_skb and skb->dev is not used in between us calling netif_rx and netif_receive_skb getting called. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04net: fix packet socket delivery in rx irq handlerPatrick McHardy
The changes to deliver hardware accelerated VLAN packets to packet sockets (commit bc1d0411) caused a warning for non-NAPI drivers. The __vlan_hwaccel_rx() function is called directly from the drivers RX function, for non-NAPI drivers that means its still in RX IRQ context: [ 27.779463] ------------[ cut here ]------------ [ 27.779509] WARNING: at kernel/softirq.c:136 local_bh_enable+0x37/0x81() ... [ 27.782520] [<c0264755>] netif_nit_deliver+0x5b/0x75 [ 27.782590] [<c02bba83>] __vlan_hwaccel_rx+0x79/0x162 [ 27.782664] [<f8851c1d>] atl1_intr+0x9a9/0xa7c [atl1] [ 27.782738] [<c0155b17>] handle_IRQ_event+0x23/0x51 [ 27.782808] [<c015692e>] handle_edge_irq+0xc2/0x102 [ 27.782878] [<c0105fd5>] do_IRQ+0x4d/0x64 Split hardware accelerated VLAN reception into two parts to fix this: - __vlan_hwaccel_rx just stores the VLAN TCI and performs the VLAN device lookup, then calls netif_receive_skb()/netif_rx() - vlan_hwaccel_do_receive(), which is invoked by netif_receive_skb() in softirq context, performs the real reception and delivery to packet sockets. Reported-and-tested-by: Ramon Casellas <ramon.casellas@cttc.es> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-14vlan: Don't store VLAN tag in cbPatrick McHardy
Use a real skb member to store the skb to avoid clashes with qdiscs, which are allowed to use the cb area themselves. As currently only real devices that consume the skb set the NETIF_F_HW_VLAN_TX flag, no explicit invalidation is neccessary. The new member fills a hole on 64 bit, the skb layout changes from: __u32 mark; /* 172 4 */ sk_buff_data_t transport_header; /* 176 4 */ sk_buff_data_t network_header; /* 180 4 */ sk_buff_data_t mac_header; /* 184 4 */ sk_buff_data_t tail; /* 188 4 */ /* --- cacheline 3 boundary (192 bytes) --- */ sk_buff_data_t end; /* 192 4 */ /* XXX 4 bytes hole, try to pack */ to __u32 mark; /* 172 4 */ __u16 vlan_tci; /* 176 2 */ /* XXX 2 bytes hole, try to pack */ sk_buff_data_t transport_header; /* 180 4 */ sk_buff_data_t network_header; /* 184 4 */ Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: avoid header copying and linearisation where possiblePatrick McHardy
- vlan_dev_reorder_header() is only called on the receive path after calling skb_share_check(). This means we can use skb_cow() since all we need is a writable header. - vlan_dev_hard_header() includes a work-around for some apparently broken out of tree MPLS code. The hard_header functions can expect to always have a headroom of at least there own hard_header_len available, so the reallocation check is unnecessary. - __vlan_put_tag() can use skb_cow_head() to avoid the skb_unshare() copy when the header is writable. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: TCI related type and naming cleanupsPatrick McHardy
The VLAN code contains multiple spots that use tag, id and tci as identifiers for arguments and variables incorrectly and they actually contain or are expected to contain something different. Additionally types are used inconsistently (unsigned short vs u16) and identifiers are sometimes capitalized. - consistently use u16 for storing TCI, ID or QoS values - consistently use vlan_id and vlan_tci for storing the respective values - remove capitalization - add kdoc comment to netif_hwaccel_{rx,receive_skb} Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: remove useless struct hlist_node declaration from if_vlan.hPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: move struct vlan_dev_info to private headerPatrick McHardy
Hide struct vlan_dev_info from drivers to prevent them from growing more creative ways to use it. Provide accessors for the two drivers that currently use it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: uninline __vlan_hwaccel_rxPatrick McHardy
The function is huge and included at least once in every VLAN acceleration capable driver. Uninline it; to avoid having drivers depend on the VLAN module, the function is always built in statically when VLAN is enabled. With all VLAN acceleration capable drivers that build on x86_64 enabled, this results in: text data bss dec hex filename 6515227 854044 343968 7713239 75b1d7 vmlinux.inlined 6505637 854044 343968 7703649 758c61 vmlinux.uninlined ---------------------------------------------------------- -9590 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08vlan: fix network_header/mac_header adjustmentsPatrick McHardy
Lennert Buytenhek points out that the VLAN code incorrectly adjusts skb->network_header to point in the middle of the VLAN header and additionally tries to adjust skb->mac_header without checking for validity. The network_header should not be touched at all since we're only adding headers in front of it, mac_header adjustments are not necessary at all. Based on patch by Lennert Buytenhek <buytenh@wantstofly.org>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05vlan: Add GVRP supportPatrick McHardy
Add GVRP support for dynamically registering VLANs with switches. By default GVRP is disabled because we only support the applicant-only participant model, which means it should not be enabled on vlans that are members of a bridge. Since there is currently no way to cleanly determine that, the user is responsible for enabling it. The code is pretty small and low impact, its wrapped in a config option though because it depends on the GARP implementation and the STP core. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16[VLAN]: Tag vlan_group_device with net device, not ifindex.Pavel Emelyanov
Currently vlan group is searched using one key - the ifindex. We'll have to lookup the vlan_group by two keys - ifindex and net. Turning the vlan_group lookup key to struct net_device pointer will make this process easier. Besides, this will eliminate one more place in the networking, that assumes that indexes are unique in the kernel. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-26[VLAN]: Reduce memory consumed by vlan_groupsPavel Emelyanov
Currently each vlan_groupd contains 8 pointers on arrays with 512 pointers on struct net_device each :) Such a construction "in many cases ... wastes memory". My proposal is to allow for some of these arrays pointers be NULL, meaning that there are no devices in it. When a new device is added to the vlan_group, the appropriate array is allocated. The check in vlan_group_get_device's is safe, since the pointer vg->vlan_devices_arrays[x] can only switch from NULL to not-NULL. The vlan_group_prealloc_vid() is guarded with rtnl lock and is also safe. I've checked (I hope that) all the places, that use these arrays and found, that the register_vlan_dev is the only place, that can put a vlan device on an empty vlan_group. Rough calculations shows, that after the patch a setup with a single vlan dev (or up to 512 vlans with sequential vids) will occupy approximately 8 times less memory. The question I have is - does this patch makes sense, or a totally new structures are required to store the vlan_devs? Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2008-02-05[VLAN]: Constify skb argument to vlan_get_tag()Patrick McHardy
Required by next patch to use it from the flow classifier. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Turn __constant_htons into htons where possiblePatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Turn VLAN_DEV_INFO into inline functionPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Simplify vlan unregistrationPatrick McHardy
Keep track of the number of VLAN devices in a vlan group. This allows to have the caller sense when the group is going to be destroyed and stop using it, which in turn allows to remove the wrapper around unregister_vlan_dev for the NETDEV_UNREGISTER notifier and avoid iterating over all possible VLAN ids whenever a device in unregistered. Also fix what looks like a use-after-free (but is actually safe since we're holding the RTNL), the real_dev reference should not be dropped while we still use it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Use dev->statsPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Kill useless VLAN_NAME definePatrick McHardy
The only user already includes __FUNCTION__ (vlan_proto_init) in the output, which is enough to identify what the message is about. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Clean up vlan_hdr/vlan_ethhdr structsPatrick McHardy
Fix 3 space indentation and some overly long lines by moving the comments to a kdoc structure description. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Remove unnecessary structure declarationsPatrick McHardy
- struct packet_type is not used - struct vlan_group is declared later in the file before the first use - struct net_device is not needed since netdevice.h is included - struct vlan_collection does not exist - struct vlan_dev_info is declared later in the file before the first use Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[VLAN]: Avoid expensive dividesEric Dumazet
We can avoid divides (as seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y on x86) changing vlan_group_get_device()/vlan_group_set_device() id parameter from signed to unsigned. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make the device list and device lookups per namespace.Eric W. Biederman
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Use multicast list synchronization helpersPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Fix promiscous/allmulti synchronization racesPatrick McHardy
The set_multicast_list function may be called without holding the rtnl mutex, resulting in races when changing the underlying device's promiscous and allmulti state. Use the change_rx_mode hook, which is always invoked under the rtnl. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11[VLAN]: Fix MAC address handlingPatrick McHardy
The VLAN MAC address handling is broken in multiple ways. When the address differs when setting it, the real device is put in promiscous mode twice, but never taken out again. Additionally it doesn't resync when the real device's address is changed and needlessly puts it in promiscous mode when the vlan device is still down. Fix by moving address handling to vlan_dev_open/vlan_dev_stop and properly deal with address changes in the device notifier. Also switch to dev_unicast_add (which needs the exact same handling). Since the set_mac_address handler is identical to the generic ethernet one with these changes, kill it and use ether_setup(). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[VLAN]: Introduce symbolic constants for flag valuesPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[VLAN]: Keep track of number of QoS mappingsPatrick McHardy
Keep track of the number of configured ingress/egress QoS mappings to avoid iteration while calculating the netlink attribute size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10[VLAN]: Use 32 bit value for skb->priority mappingPatrick McHardy
skb->priority has only 32 bits and even VLAN uses 32 bit values in its API. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: unions of just one member don't get anything done, kill themArnaldo Carvalho de Melo
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and skb->mac to skb->mac_header, to match the names of the associated helpers (skb[_[re]set]_{transport,network,mac}_header). Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_mac_header()Arnaldo Carvalho de Melo
For the places where we need a pointer to the mac header, it is still legal to touch skb->mac.raw directly if just adding to, subtracting from or setting it to another layer header. This one also converts some more cases to skb_reset_mac_header() that my regex missed as it had no spaces before nor after '=', ugh. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02[VLAN]: Avoid a 4-order allocation.Dan Aloni
This patch splits the vlan_group struct into a multi-allocated struct. On x86_64, the size of the original struct is a little more than 32KB, causing a 4-order allocation, which is prune to problems caused by buddy-system external fragmentation conditions. I couldn't just use vmalloc() because vfree() cannot be called in the softirq context of the RCU callback. Signed-off-by: Dan Aloni <da-x@monatomic.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-10[PATCH] Finish annotations of struct vlan_ethhdrAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-17[VLAN]: Make sure bonding packet drop checks get done in hwaccel RX path.David S. Miller
Since __vlan_hwaccel_rx() is essentially bypassing the netif_receive_skb() call that would have occurred if we did the VLAN decapsulation in software, we are missing the skb_bond() call and the assosciated checks it does. Export those checks via an inline function, skb_bond_should_drop(), and use this in __vlan_hwaccel_rx(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-14[VLAN]: __vlan_hwaccel_rx can use the faster ether_compare_addrStephen Hemminger
The inline function compare_ether_addr is faster than memcmp. Also, don't need to drag in proc_fs.h, the only reference to proc_dir_entry is a pointer so the declaration is needed here. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Acked-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-19[8021Q]: Add endian annotations.Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[NET]: Kill skb->real_devDavid S. Miller
Bonding just wants the device before the skb_bond() decapsulation occurs, so simply pass that original device into packet_type->func() as an argument. It remains to be seen whether we can use this same exact thing to get rid of skb->input_dev as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!