aboutsummaryrefslogtreecommitdiff
path: root/include/linux/kernel.h
AgeCommit message (Collapse)Author
2009-06-25x86: Add sysctl to allow panic on IOCK NMI errorKurt Garloff
This patch introduces a new sysctl: /proc/sys/kernel/panic_on_io_nmi which defaults to 0 (off). When enabled, the kernel panics when the kernel receives an NMI caused by an IO error. The IO error triggered NMI indicates a serious system condition, which could result in IO data corruption. Rather than contiuing, panicing and dumping might be a better choice, so one can figure out what's causing the IO error. This could be especially important to companies running IO intensive applications where corruption must be avoided, e.g. a bank's databases. [ SuSE has been shipping it for a while, it was done at the request of a large database vendor, for their users. ] Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: Roberto Angelino <robertangelino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <20090624213211.GA11291@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19block: rename CONFIG_LBD to CONFIG_LBDAFBartlomiej Zolnierkiewicz
Follow-up to "block: enable by default support for large devices and files on 32-bit archs". Rename CONFIG_LBD to CONFIG_LBDAF to: - allow update of existing [def]configs for "default y" change - reflect that it is used also for large files support nowadays Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits) debugfs: use specified mode to possibly mark files read/write only debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem. xen: remove driver_data direct access of struct device from more drivers usb: gadget: at91_udc: remove driver_data direct access of struct device uml: remove driver_data direct access of struct device block/ps3: remove driver_data direct access of struct device s390: remove driver_data direct access of struct device parport: remove driver_data direct access of struct device parisc: remove driver_data direct access of struct device of_serial: remove driver_data direct access of struct device mips: remove driver_data direct access of struct device ipmi: remove driver_data direct access of struct device infiniband: ehca: remove driver_data direct access of struct device ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device hvcs: remove driver_data direct access of struct device xen block: remove driver_data direct access of struct device thermal: remove driver_data direct access of struct device scsi: remove driver_data direct access of struct device pcmcia: remove driver_data direct access of struct device PCIE: remove driver_data direct access of struct device ... Manually fix up trivial conflicts due to different direct driver_data direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
2009-06-16printk: Add KERN_DEFAULT printk log-levelLinus Torvalds
This adds a KERN_DEFAULT loglevel marker, for when you cannot decide which loglevel you want, and just want to keep an existing printk with the default loglevel. The difference between having KERN_DEFAULT and having no log-level marker at all is two-fold: - having the log-level marker will now force a new-line if the previous printout had not added one (perhaps because it forgot, but perhaps because it expected a continuation) - having a log-level marker is required if you are printing out a message that otherwise itself could perhaps otherwise be mistaken for a log-level. Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16printk: clean up handling of log-levels and newlinesLinus Torvalds
It used to be that we would only look at the log-level in a printk() after explicit newlines, which can cause annoying problems when the previous printk() did not end with a '\n'. In that case, the log-level marker would be just printed out in the middle of the line, and be seen as just noise rather than change the logging level. This changes things to always look at the log-level in the first bytes of the printout. If a log level marker is found, it is always used as the log-level. Additionally, if no newline existed, one is added (unless the log-level is the explicit KERN_CONT marker, to explicitly show that it's a continuation of a previous line). Acked-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-15debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.GeunSik Lim
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/" directory name to mount debugfs filesystem for ftrace according to ./Documentation/tracers/ftrace.txt file. And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is existed in kernel source like ftrace, DRM, Wireless, Documentation, Network[sky2]files to mount debugfs filesystem. debugfs means debug filesystem for debugging easy to use by greg kroah hartman. "/sys/kernel/debug/" name is suitable as directory name of debugfs filesystem. - debugfs related reference: http://lwn.net/Articles/334546/ Fix inconsistency of directory name to mount debugfs filesystem. * From Steven Rostedt - find_debugfs() and tracing_files() in this patch. Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Acked-by : Inaky Perez-Gonzalez <inaky@linux.intel.com> Reviewed-by : Steven Rostedt <rostedt@goodmis.org> Reviewed-by : James Smart <james.smart@emulex.com> CC: Jiri Kosina <trivial@kernel.org> CC: David Airlie <airlied@linux.ie> CC: Peter Osterlund <petero2@telia.com> CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com> CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> CC: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-16dynamic debug: resurrect old pr_debug() semantics as pr_devel()Michael Ellerman
pr_debug() used to produce zero code unless DEBUG was #defined. This is now no longer the case in practice[1]. There are places where it's useful to have debugging printks, but we don't want them to generate any code in production kernels. So add a new macro, pr_devel(), for _devel_opment, to provide the old semantics, ie. if the programmer doesn't explicitly enable debugging, no code is produced. [1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least one distro kernel, so it's not really a solution. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Cc: Jason Baron <jbaron@redhat.com> Cc: Greg Banks <gnb@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-05Merge branch 'tracing-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits) tracing, net: fix net tree and tracing tree merge interaction tracing, powerpc: fix powerpc tree and tracing tree interaction ring-buffer: do not remove reader page from list on ring buffer free function-graph: allow unregistering twice trace: make argument 'mem' of trace_seq_putmem() const tracing: add missing 'extern' keywords to trace_output.h tracing: provide trace_seq_reserve() blktrace: print out BLK_TN_MESSAGE properly blktrace: extract duplidate code blktrace: fix memory leak when freeing struct blk_io_trace blktrace: fix blk_probes_ref chaos blktrace: make classic output more classic blktrace: fix off-by-one bug blktrace: fix the original blktrace blktrace: fix a race when creating blk_tree_root in debugfs blktrace: fix timestamp in binary output tracing, Text Edit Lock: cleanup tracing: filter fix for TRACE_EVENT_FORMAT events ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release() x86: kretprobe-booster interrupt emulation code fix ... Fix up trivial conflicts in arch/parisc/include/asm/ftrace.h include/linux/memory.h kernel/extable.c kernel/module.c
2009-04-05Merge branch 'printk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: printk: correct the behavior of printk_timed_ratelimit() vsprintf: unify the format decoding layer for its 3 users, cleanup fix regression from "vsprintf: unify the format decoding layer for its 3 users" vsprintf: fix bug in negative value printing vsprintf: unify the format decoding layer for its 3 users vsprintf: add binary printf printk: introduce printk_once() Fix trivial conflicts (printk_once vs log_buf_kexec_setup() added near each other) in include/linux/kernel.h.
2009-04-02kexec: add dmesg log symbols to /proc/vmcoreinfo listsNeil Horman
It would be nice to be able to extract the dmesg log from a vmcore file without needing to keep the debug symbols for the running kernel handy all the time. We have a facility to do this in /proc/vmcore. This patch adds the log_buf and log_end symbols to the vmcoreinfo area so that tools (like makedumpfile) can easily extract the dmesg logs from a vmcore image. [akpm@linux-foundation.org: several fixes and cleanups] [akpm@linux-foundation.org: fix unused log_buf_kexec_setup()] [akpm@linux-foundation.org: build fix] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: Simon Horman <horms@verge.net.au> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar
Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
2009-04-01introduce pr_cont() macroCyrill Gorcunov
We cover all log-levels by pr_... macros except KERN_CONT one. Add it for convenience. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28kernel: remove HIPQUAD()Harvey Harrison
All users have been removed. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-28Merge branch 'linus' into core/printkIngo Molnar
2009-03-24Dynamic debug: fix pr_fmt() build errorGreg Banks
When CONFIG_DYNAMIC_DEBUG is enabled, allow callers of pr_debug() to provide their own definition of pr_fmt() even if that definition uses tricks like #define pr_fmt(fmt) "%s:" fmt, __func__ Signed-off-by: Greg Banks <gnb@sgi.com> Cc: Jason Baron <jbaron@redhat.com> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24dynamic debug: combine dprintk and dynamic printkJason Baron
This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-17Merge branch 'linus' into core/printkIngo Molnar
2009-03-12tracing/core: bring back raw trace_printk for dynamic formats stringsFrederic Weisbecker
Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-09tracing: optimize trace_printk()Ingo Molnar
Impact: micro-optimization trace_printk() does this unconditionally: trace_printk_fmt = fmt; Where trace_printk_fmt is an entry into a global array. This is very SMP-unfriendly. So only write it once per bootup. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06tracing/core: drop the old trace_printk() implementation in favour of ↵Frederic Weisbecker
trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06Merge branch 'core/printk' into tracing/ftraceIngo Molnar
2009-03-05tracing: add tracing_on/tracing_off to kernel.hSteven Rostedt
Impact: cleanup The functions tracing_start/tracing_stop have been moved to kernel.h. These are not the functions a developer most likely wants to use when they want to insert a place to stop tracing and restart it from user space. tracing_start/tracing_stop was created to work with things like suspend to ram, where even calling smp_processor_id() can crash the system. The tracing_start/tracing_stop was used to stop the tracer from doing anything. These are still light weight functions, but add a bit more overhead to be able to stop the tracers. They also have no interface back to userland. That is, if the kernel calls tracing_stop, userland can not start tracing. What a developer most likely wants to use is tracing_on/tracing_off. These are very light weight functions (simply sets or clears a bit). These functions just stop recording into the ring buffer. The tracers don't even know that this happens except that they would receive NULL from the ring_buffer_lock_reserve function. Also, there's a way for the user land to enable or disable this bit. In debugfs/tracing/tracing_on, a user may echo "0" (same as tracing_off()) or echo "1" (same as tracing_on()) into this file. This becomes handy when a kernel developer is debugging and wants tracing to turn off when it hits an anomaly. Then the developer can examine the trace, and restart tracing if they want to try again (echo 1 > tracing_on). This patch moves the prototypes for tracing_on/tracing_off to kernel.h and comments their use, so that a kernel developer will know how to use them. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-05tracing: move utility functions from ftrace.h to kernel.hIngo Molnar
Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05generic swap(): don't return a value from swap()Peter Zijlstra
The swap() macro is accidentally retuning the value of its first argument. Change it into a doesn't-return-anything macro before someone goes and relies upon this behaviour. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05printk: introduce printk_once()Ingo Molnar
This pattern shows up frequently in the kernel: static int once = 1; ... if (once) { once = 0; printk(KERN_ERR "message\n"); } ... So add a printk_once() helper macro that reduces this to a single line of: printk_once(KERN_ERR "message\n"); It works analogously to WARN_ONCE() & friends. (We use a macro not an inline because vararg expansion in inlines looks awkward and the macro is simple enough.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-08generic swap(): introduce global macro swap(a, b)Wu Fengguang
There have been some local definitions of swap(), it's time to replace them all with a uniform one. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits) uio: make uio_info's name and version const UIO: Documentation for UIO ioport info handling UIO: Pass information about ioports to userspace (V2) UIO: uio_pdrv_genirq: allow custom irq_flags UIO: use pci_ioremap_bar() in drivers/uio arm: struct device - replace bus_id with dev_name(), dev_set_name() libata: struct device - replace bus_id with dev_name(), dev_set_name() avr: struct device - replace bus_id with dev_name(), dev_set_name() block: struct device - replace bus_id with dev_name(), dev_set_name() chris: struct device - replace bus_id with dev_name(), dev_set_name() dmi: struct device - replace bus_id with dev_name(), dev_set_name() gadget: struct device - replace bus_id with dev_name(), dev_set_name() gpio: struct device - replace bus_id with dev_name(), dev_set_name() gpu: struct device - replace bus_id with dev_name(), dev_set_name() hwmon: struct device - replace bus_id with dev_name(), dev_set_name() i2o: struct device - replace bus_id with dev_name(), dev_set_name() IA64: struct device - replace bus_id with dev_name(), dev_set_name() i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name() infiniband: struct device - replace bus_id with dev_name(), dev_set_name() ISDN: struct device - replace bus_id with dev_name(), dev_set_name() ...
2009-01-06Create a DIV_ROUND_CLOSEST macro to do division with roundingDarrick J. Wong
Create a helper macro to divide two numbers and round the result to the nearest whole number. This is a helper macro for hwmon drivers that want to convert incoming sysfs values per standard hwmon practice, though the macro itself can be used by anyone. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06Make DEBUG take precedence over DYNAMIC_PRINTK_DEBUGCornelia Huck
Statically defined DEBUG should take precedence over dynamically enabled debugging; otherwise adding DEBUG (like, for example, via CONFIG_DEBUG_KOBJECT) does not have the expected result of printing pr_debug() and dev_dbg() messages unconditionally. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-30Merge branch 'core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) stacktrace: provide save_stack_trace_tsk() weak alias rcu: provide RCU options on non-preempt architectures too printk: fix discarding message when recursion_bug futex: clean up futex_(un)lock_pi fault handling "Tree RCU": scalable classic RCU implementation futex: rename field in futex_q to clarify single waiter semantics x86/swiotlb: add default swiotlb_arch_range_needs_mapping x86/swiotlb: add default phys<->bus conversion x86: unify pci iommu setup and allow swiotlb to compile for 32 bit x86: add swiotlb allocation functions swiotlb: consolidate swiotlb info message printing swiotlb: support bouncing of HighMem pages swiotlb: factor out copy to/from device swiotlb: add arch hook to force mapping swiotlb: allow architectures to override phys<->bus<->phys conversions swiotlb: add comment where we handle the overflow of a dma mask on 32 bit rcu: fix rcutorture behavior during reboot resources: skip sanity check of busy resources swiotlb: move some definitions to header swiotlb: allow architectures to override swiotlb pool allocation ... Fix up trivial conflicts in arch/x86/kernel/Makefile arch/x86/mm/init_32.c include/linux/hardirq.h as per Ingo's suggestions.
2008-11-24Merge branches 'core/debug', 'core/futexes', 'core/locking', 'core/rcu', ↵Ingo Molnar
'core/signal', 'core/urgent' and 'core/xen' into core/core
2008-11-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/isdn/i4l/isdn_net.c fs/cifs/connect.c
2008-11-15Add 'pr_fmt()' format modifier to pr_xyz macros.Martin Schwidefsky
A common reason for device drivers to implement their own printk macros is the lack of a printk prefix with the standard pr_xyz macros. Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the format string. The most common use of the pr_fmt macro would be to add the name of the device driver to all pr_xyz messages in a source file. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12Merge branch 'linus' into core/lockingIngo Molnar
2008-10-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/p54/p54common.c
2008-10-30kernel.h: fix might_sleep kernel-docRandy Dunlap
Put the kernel-doc for might_sleep() _immediately_ before the macro (no intervening lines). Otherwise kernel-doc complains like so: Warning(linux-2.6.27-rc3-git2//include/linux/kernel.h:129): No description found for parameter 'file' Warning(linux-2.6.27-rc3-git2//include/linux/kernel.h:129): No description found for parameter 'line' because kernel-doc is looking at the wrong function prototype (i.e., __might_sleep). [Yes, I have a todo note to myself to check/warn for that inconsistency in scripts/kernel-doc.] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-28net: remove NIP6(), NIP6_FMT, NIP6_SEQFMT and final usersHarvey Harrison
Open code NIP6_FMT in the one call inside sscanf and one user of NIP6() that could use %p6 in the netfilter code. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28Merge commit 'v2.6.28-rc2' into core/lockingIngo Molnar
Conflicts: arch/um/include/asm/system.h
2008-10-23Merge branch 'linus' into testLen Brown
Conflicts: MAINTAINERS arch/x86/kernel/acpi/boot.c arch/x86/kernel/acpi/sleep.c drivers/acpi/Kconfig drivers/pnp/Makefile drivers/pnp/quirks.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-20Merge branch 'tracing-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits) tracing/fastboot: improve help text tracing/stacktrace: improve help text tracing/fastboot: fix initcalls disposition in bootgraph.pl tracing/fastboot: fix bootgraph.pl initcall name regexp tracing/fastboot: fix issues and improve output of bootgraph.pl tracepoints: synchronize unregister static inline tracepoints: tracepoint_synchronize_unregister() ftrace: make ftrace_test_p6nop disassembler-friendly markers: fix synchronize marker unregister static inline tracing/fastboot: add better resolution to initcall debug/tracing trace: add build-time check to avoid overrunning hex buffer ftrace: fix hex output mode of ftrace tracing/fastboot: fix initcalls disposition in bootgraph.pl tracing/fastboot: fix printk format typo in boot tracer ftrace: return an error when setting a nonexistent tracer ftrace: make some tracers reentrant ring-buffer: make reentrant ring-buffer: move page indexes into page headers tracing/fastboot: only trace non-module initcalls ftrace: move pc counter in irqtrace ... Manually fix conflicts: - init/main.c: initcall tracing - kernel/module.c: verbose level vs tracepoints - scripts/bootgraph.pl: fallout from cherry-picking commits.
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
2008-10-16Merge branch 'core-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: do_generic_file_read: s/EINTR/EIO/ if lock_page_killable() fails softirq, warning fix: correct a format to avoid a warning softirqs, debug: preemption check x86, pci-hotplug, calgary / rio: fix EBDA ioremap() IO resources, x86: ioremap sanity check to catch mapping requests exceeding, fix IO resources, x86: ioremap sanity check to catch mapping requests exceeding the BAR sizes softlockup: Documentation/sysctl/kernel.txt: fix softlockup_thresh description dmi scan: warn about too early calls to dmi_check_system() generic: redefine resource_size_t as phys_addr_t generic: make PFN_PHYS explicitly return phys_addr_t generic: add phys_addr_t for holding physical addresses softirq: allocate less vectors IO resources: fix/remove printk printk: robustify printk, update comment printk: robustify printk, fix #2 printk: robustify printk, fix printk: robustify printk Fixed up conflicts in: arch/powerpc/include/asm/types.h arch/powerpc/platforms/Kconfig.cputype manually.
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16Make the taint flags reliableAndi Kleen
It's somewhat unlikely that it happens, but right now a race window between interrupts or machine checks or oopses could corrupt the tainted bitmap because it is modified in a non atomic fashion. Convert the taint variable to an unsigned long and use only atomic bit operations on it. Unfortunately this means the intvec sysctl functions cannot be used on it anymore. It turned out the taint sysctl handler could actually be simplified a bit (since it only increases capabilities) so this patch actually removes code. [akpm@linux-foundation.org: remove unneeded include] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16driver core: basic infrastructure for per-module dynamic debug messagesJason Baron
Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, <debugfs>/dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: <module_name> <enabled=0/1> . . . <module_name> : Name of the module in which the debug call resides <enabled=0/1> : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 <module_name>" > dynamic_printk/modules Disable a module: $echo "set enabled=0 <module_name>" > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-15Merge branches 'core/softlockup', 'core/softirq', 'core/resources', ↵Ingo Molnar
'core/printk' and 'core/misc' into core-v28-for-linus
2008-10-14ftrace: rebuild everything on change to FTRACE_MCOUNT_RECORDSteven Rostedt
When enabling or disabling CONFIG_FTRACE_MCOUNT_RECORD, we want a full kernel compile to handle the adding of the __mcount_loc sections. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-10Staging: add TAINT_CRAP for all drivers/staging codeGreg Kroah-Hartman
We need to add a flag for all code that is in the drivers/staging/ directory to prevent all other kernel developers from worrying about issues here, and to notify users that the drivers might not be as good as they are normally used to. Based on code from Andreas Gruenbacher and Jeff Mahoney to provide a TAINT flag for the support level of a kernel module in the Novell enterprise kernel release. This is the kernel portion of this feature, the ability for the flag to be set needs to be done in the build process and will happen in a follow-up patch. Cc: Andreas Gruenbacher <agruen@suse.de> Cc: Jeff Mahoney <jeffm@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-22Introduce FW_BUG, FW_WARN and FW_INFO to consistenly tell users about BIOS bugsThomas Renninger
The idea is to add this to printk after the severity: printk(KERN_ERR FW_BUG "This is not our fault, BIOS developer: fix it by simply add ...\n"); If a Firmware issue should be hidden, because it is work-arounded, but you still want to see something popping up e.g. for info only: printk(KERN_INFO FW_INFO "This is done stupid, we can handle it, but it should better be avoided in future\n"); or on the Linuxfirmwarekit to tell vendors that they did something stupid or wrong without bothering the user: printk(KERN_INFO FW_BUG "This is done stupid, we can handle it, but it should better be avoided in future\n"); Some use cases: - If a user sees a [Firmware Bug] message in the kernel he should first update the BIOS before wasting time with debugging and submiting on old firmware code to mailing lists. - The linuxfirmwarekit (http://www.linuxfirmwarekit.org) tries to detect firmware bugs. It currently is doing that in userspace which results in: - Huge test scripts that could be a one liner in the kernel - A lot of BIOS bugs are already absorbed by the kernel What do we need such a stupid linuxfirmwarekit for? - Vendors: Can test their BIOSes for Linux compatibility. There will be the time when vendors realize that the test utils on Linux are more strict and using them increases the qualitity and stability of their products. - Vendors: Can easily fix up their BIOSes and be more Linux compatible by: dmesg |grep "Firmware Bug" and send the result to their BIOS developer colleagues who should know what the messages are about and how to fix them, without the need of studying kernel code. - Distributions: can do a first automated HW/BIOS checks. This can then be done without the need of asking kernel developers who need to dig down the code and explain the details. Certification can/will just be rejected until dmesg |grep "Firmware Bug" is empty. - Thus this can be used as an instrument to enforce cleaner BIOS code. Currently every stupid Windows ACPI bug is re-implemented in Linux which is a rather unfortunate situation. We already have the power to avoid this in e.g. memory or cpu hot-plug ACPI implementations, because Linux certification is a must for most vendors in the server area. Working towards being able to do that in the laptop area (vendors are starting to look at Linux here also and will use this tool) is the goal. At least provide them a tool to make it as easy for this guys (e.g. not needing to browse kernel code) as possible. - The ordinary Linux user: can go into the next shop, boots the firmwarekit on his most preferred machines. He chooses one without BIOS bugs. Unsupported HW is ok, he likes to try out latest projects which might support them or likes to dig on it on his own, but he hates to workaround broken BIOSes like hell. I double checked with the firmwarekit. There they have: So the mapping generally is (also depending on how likely the BIOS is to blame, this could sometimes be difficult): FW_INFO = INFO FW_WARN = WARN FW_BUG = FAIL For more info about the linuxfirmwarekit and why this is needed can be found here: http://www.linuxfirmwarekit.org While severity matches with the firmwarekit, it might be tricky to hide messages from the user. E.g. we recently found out that on HP BIOSes negative temperatures are returned, which seem to indicate that the thermal zone is invalid. We can work around that gracefully by ignoring the thermal zone and we do not want to bother the ordinary user with a frightening message: Firmware Bug: thermal management absolutely broken but want to hide it from the user. But in the linuxfirmwarekit this should be shown as a real show stopper (the temperatures could really be wrong, broken thermal management is one of the worst things that can happen and the BIOS guys of the machine must implement this properly). It is intended to do that (hide it from the user with KERN_INFO msg, but still print it as a BIOS bug) by: printk(KERN_INFO FW_BUG "Negativ temperature values detected. Try to workarounded, BIOS must get fixed\n"); Hope that works out..., no idea how to better hide it as printk is the only way to easily provide this functionality. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-09-11x86: some lock annotations for user copy paths, v2Nick Piggin
- introduce might_fault() - handle the atomic user copy paths correctly [ mingo@elte.hu: move might_sleep() outside of in_atomic(). ] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>