aboutsummaryrefslogtreecommitdiff
path: root/include/linux/libata.h
AgeCommit message (Collapse)Author
2007-07-09libata: Support chips with 64K PRD quirkAlan Cox
Add ata_dumb_qc_prep and supporting logic so that a driver can just specify it needs to be helped in this area. 64K entries are split as with drivers/ide. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata-acpi: implement _GTM/_STM supportTejun Heo
Implement _GTM/_STM support. acpi_gtm is added to ata_port which stores _GTM parameters over suspend/resume cycle. A new hook ata_acpi_on_suspend() is responsible for storing _GTM parameters during suspend. _STM is executed in ata_acpi_on_resume(). With this change, invoking _GTF is safe on IDE hierarchy and acpi_sata check before _GTF is removed. ata_acpi_gtm() and ata_acpi_stm() implementation is taken from Alan Cox's pata_acpi implementation. ata_acpi_gtm() is fixed such that the result parameter is not shifted by sizeof(union acpi_object). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata: reimplement ACPI invocationTejun Heo
This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09libata-acpi: implement ata_acpi_associate()Tejun Heo
* Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: kill ATA_HORKAGE_DMA_RW_ONLYTejun Heo
ATA_HORKAGE_DMA_RW_ONLY for TORiSAN is verified to be subset of using DMA for ATAPI commands which aren't aligned to 16 bytes. As libata now doesn't use DMA for unaligned ATAPI commands, the horkage is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: kill the infamous abnormal status messageTejun Heo
The infamous abnormal status message triggers on not so abnormal cases including empty port and even when it's being triggered on actual errors the info it provides is redundant and out of context - higher level functions will print the info in better safe later anyway. Also, by being triggered all the time, it leads people to think that the abnormality is somehow related to all ATA and system problems they're experiencing and gives owners of healthy systems unfounded doubts about the integrity of the universe. Make it a DPRINTK and save the universe. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata-core/sff: Fix multiple assumptions about DMAAlan Cox
The ata IRQ ack functions are only used when debugging. Unfortunately almost every controller that calls them can cause crashes in some configurations as there are missing checks for bmdma presence. In addition ata_port_start insists of installing DMA buffers and pad buffers for controllers regardless. The SFF controllers actually need to make that decision dynamically at controller setup time and all need the same helper - so we add ata_sff_port_start. Future patches will switch the SFF drivers to use this. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-04libata: always use polling SETXFERTejun Heo
Several people have reported LITE-ON LTR-48246S detection failed because SETXFER fails. It seems the device raises IRQ too early after SETXFER. This is controller independent. The same problem has been reported for different controllers. So, now we have pata_via where the controller raises IRQ before it's ready after SETXFER and a device which does similar thing. This patch makes libata always execute SETXFER via polling. As this only happens during EH, performance impact is nil. Setting ATA_TFLAG_POLLING is also moved from issue hot path to ata_dev_set_xfermode() - the only place where SETXFER can be issued. Note that ATA_TFLAG_POLLING applies only to drivers which implement SFF TF interface and use libata HSM. More advanced controllers ignore the flag. This doesn't matter for this fix as SFF TF controllers are the problematic ones. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21libata: Kiss post_set_mode goodbyeAlan Cox
As of the -mm tree we don't have post_set_mode users any more. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-16libata: track spindown status and skip spindown_compat if possibleTejun Heo
Our assumption that most distros issue STANDBYNOW seems wrong. The upstream sysvinit and thus many distros including gentoo and opensuse don't take any action for libata disks on spindown. We can skip compat handling for these distros so that they don't need to update anything to take advantage of kernel-side shutdown. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-16libata-acpi: add ATA_FLAG_ACPI_SATA port flagTejun Heo
Whether a controller needs IDE or SATA ACPI hierarchy is determined by the programming interface of the controller not by whether the controller is SATA or PATA, or it supports slave device or not. This patch adds ATA_FLAG_ACPI_SATA port flags which tells libata-acpi that the port needs SATA ACPI nodes, and sets the flag for ahci and sata_sil24. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-16libata: during revalidation, check n_sectors after device is configuredTejun Heo
Device might be resized during ata_dev_configure() due to HPA or (later) ACPI _GTF. Currently it's worked around by caching n_sectors before turning off HPA. The cached original size is overwritten if the device is reconfigured without being hardreset - which always happens after configuring trasnfer mode. If the device gets hardreset for some reason after that, revalidation fails with -ENODEV. This patch makes size checking more robust by moving n_sectors check from ata_dev_reread_id() to ata_dev_revalidate() after the device is fully configured. No matter what happens during configuration, a device must have the same n_sectors after fully configured to be treated as the same device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/Tejun Heo
ACPI applies to both SATA and PATA. Drop the 'S' from the config variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11libata: ignore EH scheduling during initializationTejun Heo
libata enables SCSI host during ATA host activation which happens after IRQ handler is registered and IRQ is enabled. All ATA ports are in frozen state when IRQ is enabled but frozen ports may raise limited number of IRQs after being frozen - IOW, ->freeze() is not responsible for clearing pending IRQs. During normal operation, the IRQ handler is responsible for clearing spurious IRQs on frozen ports and it usually doesn't require any extra code. Unfortunately, during host initialization, the IRQ handler can end up scheduling EH for a port whose SCSI host isn't initialized yet. This results in OOPS in the SCSI midlayer. This is relatively short window and scheduling EH for probing is the first thing libata does after initialization, so ignoring EH scheduling until initialization is complete solves the problem nicely. This problem was spotted by Berck E. Nash in the following thread. http://thread.gmane.org/gmane.linux.kernel/519412 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Berck E. Nash <flyboy@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11libata: clean up SFF init messTejun Heo
The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11libata: reimplement suspend/resume support using sdev->manage_start_stopTejun Heo
Reimplement suspend/resume support using sdev->manage_start_stop. * Device suspend/resume is now SCSI layer's responsibility and the code is simplified a lot. * DPM is dropped. This also simplifies code a lot. Suspend/resume status is port-wide now. * ata_scsi_device_suspend/resume() and ata_dev_ready() removed. * Resume now has to wait for disk to spin up before proceeding. I couldn't find easy way out as libata is in EH waiting for the disk to be ready and sd is waiting for EH to complete to issue START_STOP. * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config(). This fixes spindown on shutdown and suspend-to-disk. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-01libata: reimplement reset sequencingTejun Heo
libata previously depended upon waits in prereset to get resets after hotplug right for both spin up and device ready wait. This was necessary both for reliablity and speed as reset was likely to fail if initiated too early and each try usually took more than 30secs to fail. Previous patches fixed the reliability part by fixing status and SCR handling in resets. This patch remedies the speed part by improving reset sequencing. Prereset waiting timeout is adjusted to 10s because spinup wait is replaced by reset sequencing and !BSY wait is not as important as before. During boot or module loading where the drive is already fully spun up, !BSY wait succeeds immediately, so 10s should be enough in most cases. It matters after hotplugging or other error conditions, but in those cases, !BSY wait in prereset simply can't be relied upon due to the varied and weird behaviors ATA controllers and devices show. Reset is now driven by ata_eh_reset_timeouts[] table which contains timeouts for each reset try. The first reset can be softreset but the following ones are always hardreset if available. Each timeout defines deadline for the reset try. If a reset try fails, reset is retried with the next timeout till the end of the timeout table is reached. If a reset try fails before the timeout with error, libata waits till the deadline of the failed try before retrying. IOW, the timeout table defines timetable of reset tries such that the n'th try always begins at least after the sum of all previous timeouts has passed. The current timetable defines 4 tries and takes around 1 minute. @0 : First try. This should succeed most of the time during boot. @10 : 10s is enough to spin up most consumer harddrives. Give it another shot. @20 : 20s should spin up > 99% of working drives. This has 30s timeout for retarded devices needing long idleness post reset. @55 : Final try with 5s timeout just in case. The above timetable is trade off between not annoying the device too much with frequent resets and taking reasonable amount of time in most cases. Some controllers may do better with shorter timeouts while others may fare better with longer but we just can't rely upon LLD writers to test each controller with wide variety of devices using various scenarios. We need default behavior which reasonably fits most cases. I've tested the above timetable on a dozen SATA controllers and a few PATA controllers with about a dozen different drives from all major vendors and 4 different ODDs from three different vendors for both boot and hotplug (if available) cases. Boot probing is not affected unless the device is broken in which cases new code gives up on the port after a minute rather than five or nine minutes. When hotplugging, most devices get detected on the first or second try. Multi-platter drives with long spin up time which sometimes took > 40 secs with the original code, now usually comes up during the second try and at least right after the third try @20. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-01libata: add deadline support to prereset and reset methodsTejun Heo
Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESETTejun Heo
Separate ATA_EHI_DID_RESET into ATA_EHI_DID_SOFTRESET and ATA_EHI_DID_HARDRESET. ATA_EHI_DID_RESET is redefined as OR of the two flags. This patch doesn't introduce any behavior change. This will be used later to determine whether _SDD is necessary or not. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: HPA supportAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: kill probe_ent and related helpersTejun Heo
All drivers are converted to new init model. Kill probe_ent, ata_device_add() and ata_pci_init_native_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: add init helpers including ata_pci_prepare_native_host()Tejun Heo
These will be used to convert LLDs to new init model. * Add irq_handler field to port_info. In new init model, requesting IRQ is LLD's responsibility and libata doesn't need to know about irq_handler. Most LLDs can simply register their irq_handler but some need different irq_handler depending on specific chip. The added port_info->irq_handler field can be used by LLDs to select the matching IRQ handler in such cases. * Add ata_dummy_port_info. * Implement ata_pci_prepare_native_host(), a helper to alloc ATA host, acquire all resources and init the host in one go. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: convert native PCI host handling to new init modelTejun Heo
Convert native PCI host handling to alloc-init-register model. New function ata_pci_init_native_host() follows the new init model and replaces ata_pci_init_native_mode(). As there are remaining LLD users, the old function isn't removed yet. ata_pci_init_one() is reimplemented using the new function and now fully converted to new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: implement ata_host_alloc_pinfo() and ata_host_register()Tejun Heo
Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: separate out ata_host_alloc() and ata_host_register()Tejun Heo
Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: separate out ata_host_start()Tejun Heo
Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: allocate ap separately from shostTejun Heo
Don't embed ap inside shost. Allocate it separately and point it back from shosts's hostdata. This makes port allocation more flexible and allows regular ATA and SAS share host alloc/init paths. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: add support for READ/WRITE LONGMark Lord
The READ/WRITE LONG commands are theoretically obsolete, but the majority of drives in existance still implement them. The WRITE_LONG and WRITE_LONG_ONCE commands are of particular interest for fault injection testing -- eg. creating "media errors" at specific locations on a disk. The fussy bit is that these commands require a non-standard sector size, usually 520 bytes instead of 512. This patch adds support to libata for READ/WRITE LONG commands issued via SG_IO/ATA_16. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: Change prototype of mode_filter to remove ata_port*Alan Cox
With Tejun having added adev->ap some time ago we can get rid of the almost unused port being passed to mode filters. And while we are doing filters, lets turn on the !IORDY filter as well. Signed-off-by: Alan Cox <alan@redhat.com> With some hand massaging from Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28pata: expose set_mode method so it can be wrappedAlan
This splits set_mode into do_set_mode and the wrapper so that a driver can call the standard method inside its own. This in theory also obsoletes ->post_set_mode(). Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: cable detection fixesAlan Cox
2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28libata: dev_config does not need ap and adev passingAlan
It used to be impossible to get from ata_device to ata_port but that is no longer true. Various methods have been cleaned up over time but dev_config still takes both and most users don't need both anyway. Tidy this one up Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28[libata] export sata_print_link_status()Jeff Garzik
To be used in sata_mv's exception handling code, and overall is a generally useful function. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-04libata: Limit ATAPI DMA to R/W commands only for TORiSAN DVD drives (take 3)Albert Lee
patch 4/4: Limit ATAPI DMA to R/W commands only for TORiSAN DRD-N216 DVD-ROM drives (http://bugzilla.kernel.org/show_bug.cgi?id=6710) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-04libata: Limit max sector to 128 for TORiSAN DVD drives (take 3)Albert Lee
patch 3/4: The TORiSAN drive locks up when max sector == 256. Limit max sector to 128 for the TORiSAN DRD-N216 drives. (http://bugzilla.kernel.org/show_bug.cgi?id=6710) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-04libata: reorder HSM_ST_FIRST for easier decoding (take 3)Albert Lee
patch 1/4: Reorder HSM_ST_FIRST, such that the task state transition is easier decoded with human eyes. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02libata: add CONFIG_PM to libata core layerTejun Heo
Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02libata-core: Fix simplex handlingAlan
The initial simplex handling code is fooled if you suspend and resume. This also causes problems with some single channel controllers which claim to be simplex. The fix is fairly simple, instead of keeping a flag to remember if we gave away the simplex channel we remember the actual owner. As the owner is always part of the host_set we don't even need a refcount. Knowing the owner also means we can reassign simplex DMA channels in future hotplug code etc if we need to Signed-off-by: Alan Cox <alan@redhat.com> (and a signed-off for the patch I sent before while I remember) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-25Add id_to_dma_mode function for printing DMA modesAlan
Also export dev_disable as this is needed by drivers doing slave decode filtering, which will follow shortly Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21libata: s/ap->id/ap->print_id/gTejun Heo
ata_port has two different id fields - id and port_no. id is system-wide 1-based unique id for the port while port_no is 0-based host-wide port number. The former is primarily used to identify the ATA port to the user in printk messages while the latter is used in various places in libata core and LLDs to index the port inside the host. The two fields feel quite similar and sometimes ap->id is used in place of ap->port_no, which is very difficult to spot. This patch renames ap->id to ap->print_id to reduce the possibility of such bugs. Some printk messages are adjusted such that id string (ata%u[.%u]) isn't printed twice and/or to use ata_*_printk() instead of hardcoded id format. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21libata: separate out ata_ncq_enabled()Tejun Heo
Separate out ata_ncq_enabled(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21libata: put some intelligence into EH speed down sequenceTejun Heo
The current EH speed down code is more of a proof that the EH framework is capable of adjusting transfer speed in response to error. This patch puts some intelligence into EH speed down sequence. The rules are.. * If there have been more than three timeout, HSM violation or unclassified DEV errors for known supported commands during last 10 mins, NCQ is turned off. * If there have been more than three timeout or HSM violation for known supported command, transfer mode is slowed down. If DMA is active, it is first slowered by one grade (e.g. UDMA133->100). If that doesn't help, it's slowered to 40c limit (UDMA33). If PIO is active, it's slowered by one grade first. If that doesn't help, PIO0 is forced. Note that this rule does not change transfer mode. DMA is never degraded into PIO by this rule. * If there have been more than ten ATA bus, timeout, HSM violation or unclassified device errors for known supported commands && speeding down DMA mode didn't help, the device is forced into PIO mode. Note that this rule is considered only for PATA devices and is pretty difficult to trigger. One error can only trigger one rule at a time. After a rule is triggered, error history is cleared such that the next speed down happens only after some number of errors are accumulated. This makes sense because now speed down is done in bigger stride. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-21libata: PATA driver for CellebAkira Iguchi
This is the patch for PATA controller of Celleb. This driver uses the managed iomap (devres). Because this driver needs special taskfile accesses, there is a copy of ata_std_softreset(). ata_dev_try_classify() is exported so that it can be used in this function. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-16[PATCH] libata: ACPI and _GTF supportKristen Carlson Accardi
_GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2007-02-15libata: Add a host flag to indicate lack of IORDY capabilityAlan Cox
This is the first preparation to doing the !IORDY cases properly. Further diffs will then add the needed logic to do it right. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: kill ATA_ENABLE_PATAJeff Garzik
The ATA_ENABLE_PATA define was never meant to be permanent, and in recent kernels, it's already been unconditionally enabled. Remove. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: add another IRQ calls (core and headers)Akira Iguchi
This patch is against the libata core and headers. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: convert to iomapTejun Heo
Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: remove unused functionsTejun Heo
Now that all LLDs are converted to use devres, default stop callbacks are unused. Remove them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09libata: update libata core layer to use devresTejun Heo
Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>