aboutsummaryrefslogtreecommitdiff
path: root/include/linux/mmc
AgeCommit message (Collapse)Author
2009-06-16V4L/DVB (11239): sdio: add cards ids for sms (Siano Mobile Silicon) MDTV ↵Uri Shkolnik
receivers sdio: add cards id for sms (Siano Mobile Silicon) MDTV receivers Add SDIO vendor ID, and multiple device IDs for various SMS-based MDTV SDIO adapters. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-22libertas: add support for Marvell SD8688 chipBing Zhao
libertas: add support for Marvell SD8688 chip Use RxPD->pkt_ptr to locate eth803 header in the packet received since SD8688/v10 firmware allows a gap between RxPD and eth803 header. Set SDIO block size to 256 for CMD53. The maximum block size for SD8688 WLAN function is set to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size results upto 2K bytes data (4 blocks) being transferred and causes buffer overflow in firmware. Both changes above are backward compatible with earlier firmware versions for SD8385/SD8686. The SDIO_DEVICE_IDs for SD8688 chip are added in include/linux/mmc/sdio_ids.h Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-31MMC: regulator utilitiesDavid Brownell
Glue between MMC and regulator stacks ... verified with some OMAP3 boards using adjustable and configured-as-fixed regulators on several MMC controllers. These calls are intended to be used by MMC host adapters using at least one regulator per host. Examples include slots with regulators supporting multiple voltages and ones using multiple voltage rails (e.g. DAT4..DAT7 using a separate supply, or a split rail chip like certain SDIO WLAN or eMMC solutions). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-12-31mmc: Add mmc_vddrange_to_ocrmask() helper functionAnton Vorontsov
This function sets the OCR mask bits according to provided voltage ranges. Will be used by the mmc_spi OpenFirmware bindings. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-12-31mmc: Add 8-bit bus width supportJarkko Lavinen
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-11-08mmc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12Fix comment in include/linux/mmc/host.hThomas Petazzoni
In include/linux/mmc/host.h, it is mentionned that the callback to know if a card is present or not is get_ro(). But it's get_cd(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Add per-card debugfs supportHaavard Skinnemoen
For each card successfully added to the bus, create a subdirectory under the host's debugfs root with information about the card. At the moment, only a single file is added to the card directory for all cards: "state". It reflects the "state" field in struct mmc_card, indicating whether the card is present, readonly, etc. For MMC and SD cards (not SDIO), another file is added: "status". Reading this file will ask the card about its current status and return it. This can be useful if the card just refuses to respond to any commands, which might indicate that the card state is not what the MMC core thinks it is (due to a missing stop command, for example.) Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Export internal host state through debugfsHaavard Skinnemoen
When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug containing information about an mmc host's internal state. Currently, just a single file is created, "ios", which contains information about the current operating parameters for the bus (clock speed, bus width, etc.) Host drivers can add additional files and directories under the host's root directory by passing the debugfs_root field in struct mmc_host as the 'parent' parameter to debugfs_create_*. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits) sdio_uart: Fix SDIO break control to now return success or an error mmc: host driver for Ricoh Bay1Controllers sdio: sdio_io.c Fix sparse warnings sdio: fix the use of hard coded timeout value. mmc: OLPC: update vdd/powerup quirk comment mmc: fix spares errors of sdhci.c mmc: remove multiwrite capability wbsd: fix bad dma_addr_t conversion atmel-mci: Driver for Atmel on-chip MMC controllers mmc: fix sdio_io sparse errors mmc: wbsd.c fix shadowing of 'dma' variable MMC: S3C24XX: Refuse incorrectly aligned transfers MMC: S3C24XX: Add maintainer entry MMC: S3C24XX: Update error debugging. MMC: S3C24XX: Add media presence test to request handling. MMC: S3C24XX: Fix use of msecs where jiffies are needed MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices MMC: S3C24XX: Fix s3c2410_dma_request() return code check. MMC: S3C24XX: Allow card-detect on non-IRQ capable pin MMC: S3C24XX: Ensure host->mrq->data is valid ... Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c and include/linux/mmc/sdio_func.h when merging.
2008-07-15sdio: fix the use of hard coded timeout value.Benzi Zbit
This adds reading and using of enable_timeout from the CIS Signed-off-by: Benzi Zbit <benzi.zbit@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: remove multiwrite capabilityPierre Ossman
Relax requirements on host controllers and only require that they do not report a transfer count than is larger than the actual one (i.e. a lower value is okay). This is how many other parts of the kernel behaves so upper layers should already be prepared to handle that scenario. This gives us a performance boost on MMC cards. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: fix sdio_io sparse errorsTomas Winkler
This patch fixes sdio_io sparse errors. This fix changes signature of API functions, changing unsigned char -> u8 unsigned short -> u16 unsigned long -> u32 - this was probably a bug in 64 bit platforms Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc,sdio: helper function for transfer paddingPierre Ossman
There are a lot of crappy controllers out there that cannot handle all the request sizes that the MMC/SD/SDIO specifications require. In case the card driver can pad the data to overcome the problems, this commit adds a helper that calculates how much that padding should be. A corresponding helper is also added for SDIO, but it can also deal with all the complexities of splitting up a large transfer efficiently. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: change .get_ro() callback semanticsAnton Vorontsov
Now get_ro() callback must return 0/1 values for its logical states, and negative errno values in case of error. If particular host instance doesn't support RO/WP switch, it should return -ENOSYS. This patch changes some hosts in two ways: 1. Now functions should be smart to not return negative values in "RO asserted" case (particularly gpio_ calls could return negative values for the outermost GPIOs). Also, board code usually passes get_ro() callbacks that directly return gpioreg & bit result, so at91_mci, imxmmc, pxamci and mmc_spi's get_ro() handlers need take special care when returning platform's values to the mmc core. 2. In case of host instance didn't implement get_ro() callback, it should really return -ENOSYS and let the mmc core decide what to do about it (mmc core thinks the same way as the hosts, so it isn't functional change). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15mmc: add support for card-detection pollingAnton Vorontsov
Some hosts (and boards that use mmc_spi) do not use interrupts on the CD line, so they can't trigger mmc_detect_change. We want to poll the card and see if there was a change. 1 second poll interval seems resonable. This patch also implements .get_cd() host operation, that could be used by the hosts that are able to report card-detect status without need to talk MMC. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15include/linux/mmc/mmc.h: remove CVS tagsAdrian Bunk
This patch removes a CVS tag that wasn't updated for a long time. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-12-12mmc: remove unused 'mode' from the mmc_host structureNicolas Pitre
This field and corresponding defines are simply never used anywhere in the code. But its mere presence is enough to confuse some host driver authors who attempt to rely on it. Let's eliminate the possibility for confusion and remove it entirely. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-17net: libertas sdio driverPierre Ossman
Add driver for Marvell's Libertas 8385 and 8686 wifi chips. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Dan Williams <dcbw@redhat.com>
2007-09-24mmc: add led triggerPierre Ossman
Add a led trigger for each host controller that indicates if there is a request active on the controller. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23MMC headers learn about SPIDavid Brownell
Teach the MMC/SD/SDIO system headers that some hosts use SPI mode - New host capabilities and status bits * MMC_CAP_SPI, with mmc_host_is_spi() test * mmc_host.use_spi_crc flag - SPI-specific declarations: * Response types, MMC_RSP_SPI_R* * Two SPI-only commands * Status bits used native to SPI: R1_SPI_*, R2_SPI_* - Fix a few (unrelated) whitespace bugs in the headers. - Reorder a few mmc_host fields, removing several bytes of padding None of these changes affect current code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: store vendor stringsPierre Ossman
Store vendor strings found in CISTPL_VERS_1 so that function drivers can access them. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: add sdio_f0_readb() and sdio_f0_writeb()David Vrabel
Add sdio_f0_readb() and sdio_f0_writeb() functions to reading and writing function 0 registers. Writes outside the vendor specific CCCR registers (0xF0 - 0xFF) are not permitted. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: set the functions' block sizeDavid Vrabel
Before a driver is probed, set the function's block size to the default so the driver is sure the block size is something sensible and it needn't explicitly set it. The default block size is the largest that's supported by both the card and the host, with a maximum of 512 to ensure aribitrarily sized transfer use the optimal (least) number of commands. See http://lkml.org/lkml/2007/8/7/150 for reasons for the block size choice. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: add SDIO_FBR_BASE(f) macroDavid Vrabel
Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: add interface for host side SDIO interrupt reportingNicolas Pitre
Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: support IO_RW_EXTENDEDPierre Ossman
Support the multi-byte transfer operation, including handlers for common operations like writel()/readl(). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: core support for SDIO function interruptNicolas Pitre
Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: allow for mmc_claim_host to be abortedNicolas Pitre
It is sometimes necessary to give up on trying to claim the host lock, especially if that happens in a thread that has to be stopped. While at it, fix the description for mmc_claim_host() which was wrong. Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: defines for some standard interface typesNicolas Pitre
Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: add device id table and matchingPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: split up common and function CIS parsingPierre Ossman
Add a more clean separation between global, common CIS information and the function specific one as we need the common information in places where no specific function is specified. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: link unknown CIS tuples to the sdio_func structureNicolas Pitre
This way those tuples that the core cares about are consumed by the core code, and tuples that only function drivers might make sense of are available to drivers. Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: basic parsing of FBRPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23sdio: read and decode interesting parts of the CCCRPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: enable/disable functions for SDIOPierre Ossman
Like many other buses, the devices (functions) on the SDIO bus must be enabled before they can be used. Add functions that allow drivers to do so. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: add basic SDIO I/O operationsPierre Ossman
Add command wrappers that simplify register access from SDIO function drivers. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: add SDIO driver handlingPierre Ossman
Add basic driver handling to the SDIO device model. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: basic SDIO device modelPierre Ossman
Add the sdio bus type and basic device handling. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: implement SDIO IO_RW_DIRECT operationPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: detect SDIO cardsPierre Ossman
Really basic init sequence for SDIO cards. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: remove confusing flagPierre Ossman
The MMC_DATA_MULTI flag never had a proper definition of what it means, so remove it and let the drivers check the block count in the request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: remove BYTEBLOCK capabilityPierre Ossman
Remove the BYTEBLOCK capability and let the broken hosts fail the requests with -EINVAL instead. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: mmc_set_data_timeout() parameter write is redundantPierre Ossman
The write parameter in mmc_set_data_timeout() is redundant as the data structure contains information about the direction of the transfer. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: read ext_csd version numberPierre Ossman
Make sure we do not try to parse a structure we do not understand. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-09-23mmc: remove custom error codesPierre Ossman
Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: update kerneldocPierre Ossman
Make sure the kerneldoc comments are up to date and relevant. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01mmc: remove old card statesPierre Ossman
Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01MMC: Fix handling of low-voltage cardsPhilip Langdale
Fix handling of low voltage MMC cards. The latest MMC and SD specs both agree that support for low-voltage operations is indicated by bit 7 in the OCR. The MMC spec states that the low voltage range is 1.65-1.95V while the SD spec leaves the actual voltage range undefined - meaning that there is still no such thing as a low voltage SD card. However, an old Sandisk spec implied that bits 7.0 represented voltages below 2.0V in 1V or 0.5V increments, and the code was accordingly written with that expectation. This confusion meant that host drivers attempting to support the typical low voltage (1.8V) would set the wrong bits in the host OCR mask (usually bits 5 and/or 6) resulting in the the low voltage mode never being used. This change corrects the low voltage range and adds sanity checks on the reserved bits (0-6) and for SD cards that claim to support low-voltage operations. Signed-off-by: Philip Langdale <philipl@overt.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01MMC: Consolidate voltage definitionsPhilip Langdale
Consolidate the list of available voltages. Up until now, a separate set of defines has been used for host->vdd than that used for the OCR voltage mask values. Having two sets of defines allows them to get out of sync and the current sets are already inconsistent with one claiming to describe ranges and the other specific voltages. Only the SDHCI driver uses the host->vdd defines and it is easily fixed to use the OCR defines. Signed-off-by: Philip Langdale <philipl@overt.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>