aboutsummaryrefslogtreecommitdiff
path: root/include/linux/usb.h
AgeCommit message (Collapse)Author
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (143 commits) USB: xhci depends on PCI. USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. USB: xhci: Respect critical sections. USB: xHCI: Fix interrupt moderation. USB: xhci: Remove packed attribute from structures. usb; xhci: Fix TRB offset calculations. USB: xhci: replace if-elseif-else with switch-case USB: xhci: Make xhci-mem.c include linux/dmapool.h USB: xhci: drop spinlock in xhci_urb_enqueue() error path. USB: Change names of SuperSpeed ep companion descriptor structs. USB: xhci: Avoid compiler reordering in Link TRB giveback. USB: xhci: Clean up xhci_irq() function. USB: xhci: Avoid global namespace pollution. USB: xhci: Fix Link TRB handoff bit twiddling. USB: xhci: Fix register write order. USB: xhci: fix some compiler warnings in xhci.h USB: xhci: fix lots of compiler warnings. USB: xhci: use xhci_handle_event instead of handle_event USB: xhci: URB cancellation support. USB: xhci: Scatter gather list support for bulk transfers. ...
2009-06-15USB: Change names of SuperSpeed ep companion descriptor structs.Sarah Sharp
Differentiate between SuperSpeed endpoint companion descriptor and the wireless USB endpoint companion descriptor. Make all structure names for this descriptor have "ss" (SuperSpeed) in them. David Vrabel asked for this change in http://marc.info/?l=linux-usb&m=124091465109367&w=2 Reported-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Push scatter gather lists down to host controller drivers.Sarah Sharp
This is the original patch I created before David Vrabel posted a better patch (http://marc.info/?l=linux-usb&m=123377477209109&w=2) that does basically the same thing. This patch will get replaced with his (modified) patch later. Allow USB device drivers that use usb_sg_init() and usb_sg_wait() to push bulk endpoint scatter gather lists down to the host controller drivers. This allows host controller drivers to more efficiently enqueue these transfers, and allows the xHCI host controller to better take advantage of USB 3.0 "bursts" for bulk endpoints. This patch currently only enables scatter gather lists for bulk endpoints. Other endpoint types that use the usb_sg_* functions will not have their scatter gather lists pushed down to the host controller. For periodic endpoints, we want each scatterlist entry to be a separate transfer. Eventually, HCDs could parse these scatter-gather lists for periodic endpoints also. For now, we use the old code and call usb_submit_urb() for each scatterlist entry. The caller of usb_sg_init() can request that all bytes in the scatter gather list be transferred by passing in a length of zero. Handle that request for a bulk endpoint under xHCI by walking the scatter gather list and calculating the length. We could let the HCD handle a zero length in this case, but I'm not sure if the core layers in between will get confused by this. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Parse and store the SuperSpeed endpoint companion descriptors.Sarah Sharp
The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Support for submitting control URBs under xHCI.Sarah Sharp
Warn users of URB_NO_SETUP_DMA_MAP about xHCI behavior. Device drivers can choose to DMA map the setup packet of a control transfer before submitting the URB to the USB core. Drivers then set the URB_NO_SETUP_DMA_MAP and pass in the DMA memory address in setup_dma, instead of providing a kernel address for setup_packet. However, xHCI requires that the setup packet be copied into an internal data structure, and we need a kernel memory address pointer for that. Warn users of URB_NO_SETUP_DMA_MAP that they should provide a valid pointer for setup_packet, along with the DMA address. FIXME: I'm not entirely sure how to work around this in the xHCI driver or USB core. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Support for addressing a USB device under xHCISarah Sharp
Add host controller driver API and a slot_id variable to struct usb_device. This allows the xHCI host controller driver to ask the hardware to allocate a slot for the device when a struct usb_device is allocated. The slot needs to be allocated at that point because the hardware can run out of internal resources, and we want to know that very early in the device connection process. Don't call this new API for root hubs, since they aren't real devices. Add HCD API to let the host controller choose the device address. This is especially important for xHCI hardware running in a virtualized environment. The guests running under the VM don't need to know which addresses on the bus are taken, because the hardware picks the address for them. Announce SuperSpeed USB devices after the address has been assigned by the hardware. Don't use the new get descriptor/set address scheme with xHCI. Unless special handling is done in the host controller driver, the xHC can't issue control transfers before you set the device address. Support for the older addressing scheme will be added when the xHCI driver supports the Block Set Address Request (BSR) flag in the Address Device command. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Add route string to struct usb_device.Sarah Sharp
This patch adds a hex route string to each USB device. The route string is used by the USB 3.0 host controller to send packets through the device tree. USB 3.0 hubs use this string to route packets to the correct port. This is fundamental bus change from USB 2.0, where all packets were broadcast across the bus. Devices (including hubs) under a root port receive the route string 0x0. Every four bits in the route string represent a port on a hub. This length works because USB 3.0 hubs are limited to 15 ports, and USB 2.0 hubs (with potentially more ports) will never see packets with a route string. A port number of 0 means the packet is destined for that hub. For example, a peripheral device might have a route string of 0x00097. This means the device is connected to port 9 of the hub at depth 1. The hub at depth 1 is connected to port 7 of a hub at depth 0. The hub at depth 0 is connected to a root port. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: usb.h: change private: kernel-doc for new format requirementRandy Dunlap
Use "/* private:" to mark struct members as private so that scripts/kernel-doc will handle them correctly. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: remove unused usb_host classGreg Kroah-Hartman
The usb_host class isn't used for anything anymore (it was used for debug files, but they have moved to debugfs a few kernel releases ago), so let's delete it before someone accidentally puts a file in it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: add usb debugfs directoryGreg Kroah-Hartman
Add a common usb directory in debugfs that the usb subsystem can use. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15Driver Core: usb: add nodename support for usb drivers.Kay Sievers
This adds support for USB drivers to report their requested nodename to userspace. It also updates a number of USB drivers to provide the needed subdirectory and device name to be used for them. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-17USB: add reset endpoint operationsDavid Vrabel
Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: make actual_length in struct urb field u32Greg Kroah-Hartman
actual_length should also be a u32 and not a signed value. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: make transfer_buffer_lengths in struct urb field u32Greg Kroah-Hartman
Roel Kluin pointed out that transfer_buffer_lengths in struct urb was declared as an 'int'. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24USB: Move definitions from usb.h to usb/ch9.hJulia Lawall
The functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) are moved from include/linux/usb.h to include/linux/usb/ch9.h. include/linux/usb/ch9.h makes more sense for these functions because they only depend on constants that are defined in this file. Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-27USB: add kernel-doc for wusb_dev in struct usb_deviceInaky Perez-Gonzalez
Reported by Randy Dunlap from a warning on the v2.6.29 merge window. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: remove info() macro from usb.hGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. No one in the tree is using the macro, so it can now be removed. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: remove warn() macro from usb.hGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Now that all in-tree users are gone, remove the macro. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: extension of anchor API to unpoison an anchorOliver Neukum
This extension allows unpoisoning an anchor allowing drivers that resubmit URBs to reuse an anchor for methods like resume() Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: mark "reject" field of struct urb as atomic_tMing Lei
It is enough to protect accesses to reject field of urb by marking it as atomic_t,also it is the only reason of existence of usb_reject_lock,so remove the lock to make code more clean. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: utilize the bus notifiersAlan Stern
This patch (as1185) makes usbcore take advantage of the bus notifications sent out by the driver core. Now we can create all our device and interface attribute files before the device or interface uevent is broadcast. A side effect is that we no longer create the endpoint "pseudo" devices at the same time as a device or interface is registered -- it seems like a bad idea to try registering an endpoint before the registration of its parent is complete. So the routines for creating and removing endpoint devices have been split out and renamed, and they are called explicitly when needed. A new bitflag is used for keeping track of whether or not the interface's endpoint devices have been created, since (just as with the interface attributes) they vary with the altsetting and hence can be changed at random times. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: Enhance usage of pm_message_tAlan Stern
This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: Allow usbmon as a module even if usbcore is builtinPete Zaitcev
usbmon can only be built as a module if usbcore is a module too. Trivial changes to the relevant Kconfig and Makefile (and a few trivial changes elsewhere) allow usbmon to be built as a module even if usbcore is builtin. This is verified to work in all 9 permutations (3 correctly prohibited by Kconfig, 6 build a suitable result). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: Introduce usb_queue_reset() to do resets from atomic contextsInaky Perez-Gonzalez
This patch introduces a new call to be able to do a USB reset from an atomic contect. This is quite helpful in USB callbacks to handle errors (when the only thing that can be done is to do a device reset). It is done queuing a work struct that will do the actual reset. The struct is "attached" to an interface so pending requests from an interface are removed when said interface is unbound from the driver. The call flow then becomes: usb_queue_reset_device() __usb_queue_reset_device() [workqueue] usb_reset_device() usb_probe_interface() usb_cancel_queue_reset() [error path] usb_unbind_interface() usb_cancel_queue_reset() usb_driver_release_interface() usb_cancel_queue_reset() Note usb_cancel_queue_reset() needs smarts to try not to unqueue when it is actually being executed. This happens when we run the reset from the workqueue: usb_reset_device() is called and on interface unbind time, usb_cancel_queue_reset() would be called. That would deadlock on cancel_work_sync(). To avoid that, we set (before running usb_reset_device()) usb_intf->reset_running and clear it inmediately after returning. Patch is against 2.6.28-rc2 and depends on http://marc.info/?l=linux-usb&m=122581634925308&w=2 (as submitted by Alan Stern). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: add asynchronous autosuspend/autoresume supportAlan Stern
This patch (as1160b) adds support routines for asynchronous autosuspend and autoresume, with accompanying documentation updates. There already are several potential users of this interface, and others are likely to arise as autosuspend support becomes more widespread. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: don't register endpoints for interfaces that are going awayAlan Stern
This patch (as1155) fixes a bug in usbcore. When interfaces are deleted, either because the device was disconnected or because of a configuration change, the extra attribute files and child endpoint devices may get left behind. This is because the core removes them before calling device_del(). But during device_del(), after the driver is unbound the core will reinstall altsetting 0 and recreate those extra attributes and children. The patch prevents this by adding a flag to record when the interface is in the midst of being unregistered. When the flag is set, the attribute files and child devices will not be created. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27, 2.6.26, 2.6.25] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: anchor API changes needed for btusbOliver Neukum
This extends the anchor API as btusb needs for autosuspend. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: extend poisoning to anchorsOliver Neukum
this extends the poisoning concept to anchors. This way poisoning will work with fire and forget drivers. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17USB: kill URBs permanentlyOliver Neukum
looking at usb_kill_urb() it seems to me that it is unnecessarily lenient. In the use case of disconnect() you never want to use the URB again (for the same device) But leaving urb->reject elevated will make it easier to avoid races between read/write and disconnect. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Defer Set-Interface for suspended devicesAlan Stern
This patch (as1128) fixes one of the problems related to the new PM infrastructure. We are not allowed to register new child devices during the middle of a system sleep transition, but unbinding a USB driver causes the core to automatically install altsetting 0 and thereby create new endpoint pseudo-devices. The patch fixes this problem (and the related problem that installing altsetting 0 will fail if the device is suspended) by deferring the Set-Interface call until some later time when it is legal and can succeed. Possible later times are: when a new driver is being probed for the interface, and when the interface is being resumed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: add missing kerneldoc line for "needs_binding"Alan Stern
This patch (as1117) adds a kerneldoc line for the "needs_binding" field in struct usb_interface. It was accidentally omitted when the field was added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: Force unbinding of drivers lacking reset_resume or other methodsAlan Stern
This patch (as1024) takes care of a FIXME issue: Drivers that don't have the necessary suspend, resume, reset_resume, pre_reset, or post_reset methods will be unbound and their interface reprobed when one of the unsupported events occurs. This is made slightly more difficult by the fact that bind operations won't work during a system sleep transition. So instead the code has to defer the operation until the transition ends. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: fix usb_reset_device and usb_reset_composite_device(take 3)Ming Lei
This patch renames the existing usb_reset_device in hub.c to usb_reset_and_verify_device and renames the existing usb_reset_composite_device to usb_reset_device. Also the new usb_reset_and_verify_device does't need to be EXPORTED . The idea of the patch is that external interface driver should warn the other interfaces' driver of the same device before and after reseting the usb device. One interface driver shoud call _old_ usb_reset_composite_device instead of _old_ usb_reset_device since it can't assume the device contains only one interface. The _old_ usb_reset_composite_device is safe for single interface device also. we rename the two functions to make the change easily. This patch is under guideline from Alan Stern. Signed-off-by: Ming Lei <tom.leiming@gmail.com>
2008-07-21USB: remove interface parameter of usb_reset_composite_deviceMing Lei
From the current implementation of usb_reset_composite_device function, the iface parameter is no longer useful. This function doesn't do something special for the iface usb_interface,compared with other interfaces in the usb_device. So remove the parameter and fix the related caller. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: implement "soft" unbindingAlan Stern
This patch (as1091) changes the way usbcore handles interface unbinding. If the interface's driver supports "soft" unbinding (a new flag in the driver structure) then in-flight URBs are not cancelled and endpoints are not disabled. Instead the driver is allowed to continue communicating with the device (although of course it should stop before its disconnect routine returns). The purpose of this change is to allow drivers to do a clean shutdown when they get unbound from a device that is still plugged in. Killing all the URBs and disabling the endpoints before calling the driver's disconnect method doesn't give the driver any control over what happens, and it can leave devices in indeterminate states. For example, when usb-storage unbinds it doesn't want to stop while in the middle of transmitting a SCSI command. The soft_unbind flag is added because in the past, a number of drivers have experienced problems related to ongoing I/O after their disconnect routine returned. Hence "soft" unbinding is made available only to drivers that claim to support it. The patch also replaces "interface_to_usbdev(intf)" with "udev" in a couple of places, a minor simplification. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21USB: handle pci_name() being constGreg Kroah-Hartman
This changes usb_create_hcd() to be able to handle the fact that pci_name() has changed to a constant string. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24wusb: add link wusb-usb deviceInaky Perez-Gonzalez
We need to tie the WUSB and USB devices; the USB stack doesn't need to know the details about the WUSB device, but needs to have a link to it. This is needed so that the notify call back for Remove Device can tie both and undo the device setup (sysfs files). We connect the devices together at the Add Device notifier callback (the wusb_dev references the usb_dev and stores it, the usb_dev references the wusb_dev and stores it); then we do create the WUSB sysfs files at the usb_dev sysfs directory. At Remove Device, we undo that (thus we need the usb_dev reference). Cross reference to functions in the WUSB substack: wusb_dev_{add,rm}_ncb(). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24wusb: add authenticathed bit to usb_devInaky Perez-Gonzalez
This bit indicates the system that the WUSB device has been crypto authenticated and thus can operate as normal. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: update comments about usb driver's headerOliver Neukum
Comments here are so outdated that they are plain wrong. We cannot expect people to write correct drivers if the headers have incorrect comments. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: add extension of anchor API, usb_unlink_anchored_urbsOliver Neukum
This adds the ability to trigger asynchronous unlinks of anchored URBs. This is needed for error handling in the comntext of completion handlers, which cannot sleep. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: usb.h: reduce syslog clutter [v3]Tilman Schmidt
The the err() / info() / warn() macros in usb.h inserted __FILE__ at the beginning of the message, which expands to the complete pathname of the source file within the kernel tree, frequently taking up half of an 80 character screen line before the actual message even begins. Use the module name instead. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: convert usb.h struct usb_device to kernel-docRandy Dunlap
Convert struct usb_device to use kernel-doc notation. Please especially check the @filelist and @usb_classdev descriptions. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: remove CONFIG_USB_PERSIST settingAlan Stern
This patch (as1047) removes the USB_PERSIST Kconfig option, enabling it permanently. It also prevents the power/persist attribute from being created for hub devices; there's no point in having it since USB-PERSIST is always turned on for hubs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04USB: fix comment of struct usb_interfaceLei Ming
update the comment for the removed "driver" field and being out-of-order of @cur_altsetting and @num_altsetting. Signed-off-by: Lei Ming <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-03docbook: fix usb source filesRandy Dunlap
Fix docbook problems in USB source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01USB: fix codingstyle issues in include/linux/usb.hGreg Kroah-Hartman
No logical code changes were made, but checkpatch.pl is much happier now. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Export suspend statisticsSarah Sharp
This patch exports two statistics to userspace: /sys/bus/usb/device/.../power/connected_duration /sys/bus/usb/device/.../power/active_duration connected_duration is the total time (in msec) that the device has been connected. active_duration is the total time the device has not been suspended. With these two statistics, tools like PowerTOP can calculate the percentage time that a device is active, i.e. not suspended or auto-suspended. Users can also use the active_duration to check if a device is actually autosuspended. Currently, they can set power/level to auto and power/autosuspend to a positive timeout, but there's no way to know from userspace if a device was actually autosuspended without looking at the dmesg output. These statistics will be useful in creating an automated userspace script to test autosuspend for USB devices. Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: Convert from class_device to device for USB coreTony Jones
Convert from class_device to device for drivers/usb/core. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-17usb.h: fix kernel-doc warningRandy Dunlap
Fix kernel-doc warning in usb.h: Warning(linux-2.6.24-rc3-git7//include/linux/usb.h:166): No description found for parameter 'sysfs_files_created' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28USB: keep track of whether interface sysfs files existAlan Stern
This patch (as1009) solves the problem of multiple registrations for USB sysfs files in a more satisfying way than the existing code. It simply adds a flag to keep track of whether or not the files have been created; that way the files can be created or removed as needed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu>