aboutsummaryrefslogtreecommitdiff
path: root/include/linux/usb/serial.h
AgeCommit message (Collapse)Author
2009-09-19tty: USB serial termios bitsAlan Cox
Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: USB does not need the filp argument in the driversAlan Cox
And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-10tty: Fix USB kref leakAlan Cox
The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-15USB: usb-serial: replace shutdown with disconnect, releaseAlan Stern
This patch (as1254) splits up the shutdown method of usb_serial_driver into a disconnect and a release method. The problem is that the usb-serial core was calling shutdown during disconnect handling, but drivers didn't expect it to be called until after all the open file references had been closed. The result was an oops when the close method tried to use memory that had been deallocated by shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: usb-serial: call port_probe and port_remove at the right timesAlan Stern
This patch (as1253) prevents the usb-serial core from calling a driver's port_probe and port_remove methods more than once per port. It also removes some unnecessary try_module_get() calls and adds a missing port_remove method call in a failure path. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: serial: usb_debug,usb_generic_serial: implement sysrq and serial breakJason Wessel
The usb_debug driver was modified to implement serial break handling by using a "magic" data packet comprised of the sequence: 0x00 0xff 0x01 0xfe 0x00 0xfe 0x01 0xff When the tty layer requests a serial break the usb_debug driver sends the magic packet. On the receiving side the magic packet is thrown away or a sysrq is activated depending on what kernel .config options have been set. The generic serial driver was modified as well as the usb serial headers to generically implement sysrq processing in the same way the non usb uart based drivers implement the sysrq handling. This will allow other usb serial devices to implement sysrq handling as desired. The new usb serial functions are named similarly and implemented similarly to the uart functions as follows: usb_serial_handle_break <-> uart_handle_break usb_serial_handle_sysrq_char <-> uart_handle_sysrq_char Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: usb_debug, usb_generic_serial: implement multi urb writeJason Wessel
The usb_debug driver, when used as the console, will always fail to insert the carriage return and new line sequence as well as randomly drop console output. This is a result of only having the single write_urb and that the tty layer will have a lock that prevents the processing of the back to back urb requests. The solution is to allow more than one urb to be outstanding and have a slightly deeper transmit queue. The idea and some code is borrowed from the ftdi_sio usb driver. The generic usb serial driver was modified so as to allow the classic method of 1 write urb, or a multi write urb scheme with N allowed outstanding urbs where N is controlled by max_in_flight_urbs. When max_in_flight_urbs in a "struct usb_serial_driver" is non zero the multi write urb scheme will be used. The size of 4000 was selected for the usb_debug driver so that the driver lowers possibility of losing the queued console messages during the kernel startup. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-11tty: Bring the usb tty port structure into more useAlan Cox
This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-14tty: Update some of the USB kernel docLeandro Dorileo
Updates some usb_serial_port members documentation. Signed-off-by: Leandro Dorileo <ldorileo@gmail.com> Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-24USB: serial: introduce a flag into the usb serial layer to tell drivers that ↵Oliver Neukum
their URBs are killed due to suspension This patch introduces a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension. That is necessary to let drivers know whether they should report an error back. Signed-off-by: Oliver Neukum <oneukum@suse.de> Hi Greg, this is for 2.6.30. Patches to use this in drivers are under development. Regards Oliver
2008-10-17USB: Fix spelling in usb/serial.hGeoff Levand
Fixes a minor typo in the comments for usb_set_serial_data. Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13usb-serial: don't release unregistered minorsAlan Stern
This patch (as1121) fixes a bug in the USB serial core. When a device is unregistered, the core will give back its minors -- even if the device hasn't been assigned any! The patch reserves the highest minor value (255) to mean that no minor was assigned. It also removes some dead code and does a small style fixup. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-22usb_serial: API all changeAlan Cox
USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24USB: serial: remove endpoints setting checks from core and headerGreg Kroah-Hartman
Remove the unused check for num_interrupt and friends as well as remove them from the header file because no usb-serial drivers no longer reference them. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: Standardize inclusion protection and add where missing.Robert P. J. Day
For the header files in include/linux/usb, add missing multiple inclusion protection and standardize what's already there. The apparent standards: * macro name of __LINUX_USB_headerfile_H * inclusion protection placed after leading comment block * macro name added as a comment on the final #endif * any obvious trivial whitespace cleanup associated with the above Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: fix codingstyle issues in include/linux/usb/Greg Kroah-Hartman
Fixes a number of coding style issues in the USB public header files. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: stop io performed by mos7720 upon close()Oliver Neukum
This fixes a problem where the mos7720 driver will make io to a device from which it has been logically disconnected. It does so by introducing a flag by which the generic usb serial code can signal the subdrivers their disconnection and appropriate locking. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01USB: usb_serial: clean tty reference in the last closeAristeu Rozanski
When a usb serial adapter is used as console, the usb serial console driver bumps the open_count on the port struct used but doesn't attach a real tty to it (only a fake one temporaly). If this port is opened later using the regular character device interface, the open method won't initialize the port, which is the expected, and will receive a brand new tty struct created by tty layer, which will be stored in port->tty. When the last close is issued, open_count won't be 0 because of the console usage and the port->tty will still contain the old tty value. This is the last ttyUSB<n> close so the allocated tty will be freed by the tty layer. The usb_serial and usb_serial_port are still in use by the console, so port_free() won't be called (serial_close() -> usb_serial_put() -> destroy_serial() -> port_free()), so the scheduled work (port->work, usb_serial_port_work()) will still run. And usb_serial_port_work() does: (...) tty = port->tty; if (!tty) return; tty_wakeup(tty); which causes (manually copied): Faulting instruction address: 0x6b6b6b68 Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT PowerMac Modules linked in: binfmt_misc ipv6 nfs lockd nfs_acl sunrpc dm_snapshot dm_mirror dm_mod hfsplus uinput ams input_polldev genrtc cpufreq_powersave i2c_powermac therm_adt746x snd_aoa_codec_tas snd_aoa_fabric_layout snd_aoa joydev snd_aoa_i2sbus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc pmac_zilog serial_core evdev ide_cd cdrom snd appletouch soundcore snd_aoa_soundbus bcm43xx firmware_class usbhid ieee80211softmac ff_memless firewire_ohci firewire_core ieee80211 ieee80211_crypt crc_itu_t sungem sungem_phy uninorth_agp agpart ssb NIP: 6b6b6b68 LR: c01b2108 CTR: 6b6b6b6b REGS: c106de80 TRAP: 0400 Not tainted (2.6.24-rc2) MSR: 40009032 <EE,ME,IR,DR> CR: 82004024 XER: 00000000 TASK = c106b4c0[5] 'events/0' THREAD: c106c000 GPR00: 6b6b6b6b c106df30 c106b4c0 c2d613a0 00009032 00000001 00001a00 00000001 GPR08: 00000008 00000000 00000000 c106c000 42004028 00000000 016ffbe0 0171a724 GPR16: 016ffcf4 00240e24 00240e70 016fee68 016ff9a4 c03046c4 c0327f50 c03046fc GPR24: c106b6b9 c106b4c0 c101d610 c106c000 c02160fc c1eac1dc c2d613ac c2d613a0 NIP [6b6b6b68] 0x6b6b6b68 LR [c01b2108] tty_wakeup+0x6c/0x9c Call Trace: [c106df30] [c01b20e8] tty_wakeup+0x4c/0x9c (unreliable) [c106df40] [c0216138] usb_serial_port_work+0x3c/0x78 [c106df50] [c00432e8] run_workqueue+0xc4/0x15c [c106df90] [c0043798] worker_thread+0xa0/0x124 [c106dfd0] [c0048224] kthread+0x48/0x84 [c106dff0] [c00129bc] kernel_thread+0x44/0x60 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX Slab corruption: size-2048 start=c2d613a0, len=2048 Redzone: 0x9f911029d74e35b/0x9f911029d74e35b. Last user: [<c01b16d8>](release_one_tty+0xbc/0xf4) 050: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b Prev obj: start=c2d60b88, len=2048 Redzone: 0x9f911029d74e35b/0x9f911029d74e35b. Last user: [<c00f30ec>](show_stat+0x410/0x428) 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b This patch avoids this, clearing port->tty considering if the port is used as serial console or not Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: serial core should respect driver requirementsAlan Stern
This patch (as997) fixes a bug in the USB serial core. The core needs to pay attention to drivers' requirements regarding the number and type of endpoints a device has. At the same time, the patch changes the NUM_DONT_CARE constant (which is stored in a single-byte field) from -1 to a safer, unsigned value. It also improves the kerneldoc for several fields in the usb_serial_driver structure. Finally, the patch replaces a list_for_each() with list_for_each_entry(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: suspend support for usb serialOliver Neukum
this implements generic support for suspend/resume for usb serial. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16USB: add flow control to usb-serial generic driver.Joris van Rantwijk
I added two fields to struct usb_serial_port to keep track of the throttle state. Other usb-serial drivers typically use private data for such things, but the generic driver can not really do that because some of its code is also used by other drivers (which may have their own private data needs). As it is, I am not sure that this patch is useful in all scenarios. It is certainly helpful for low-bandwidth devices that can hold their data in response to throttling. But for devices that pump data in real-time as fast as possible (webcam, A/D converter, etc), throttling may actually cause more data loss. From: Joris van Rantwijk <jorispubl@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB serial: add dynamic id support to usb-serial coreGreg Kroah-Hartman
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few things and getting it all working properly. This adds support for dynamic usb ids to the usb serial core. The file "new_id" will show up under the usb serial driver, not the usb driver associated with the usb-serial driver (yeah, it can be a bit confusing at first glance...) This patch also modifies the USB core to allow the usb-serial core to reuse much of the dynamic id logic. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
2006-12-08[PATCH] tty: switch to ktermiosAlan Cox
This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-07-12[PATCH] USB: move usb-serial.h to include/linux/usb/Greg Kroah-Hartman
USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>