aboutsummaryrefslogtreecommitdiff
path: root/include/linux/usb
AgeCommit message (Collapse)Author
2009-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits) tty: split the lock up a bit further tty: Move the leader test in disassociate tty: Push the bkl down a bit in the hangup code tty: Push the lock down further into the ldisc code tty: push the BKL down into the handlers a bit tty: moxa: split open lock tty: moxa: Kill the use of lock_kernel tty: moxa: Fix modem op locking tty: moxa: Kill off the throttle method tty: moxa: Locking clean up tty: moxa: rework the locking a bit tty: moxa: Use more tty_port ops tty: isicom: fix deadlock on shutdown tty: mxser: Use the new locking rules to fix setserial properly tty: mxser: use the tty_port_open method tty: isicom: sort out the board init logic tty: isicom: switch to the new tty_port_open helper tty: tty_port: Add a kref object to the tty port tty: istallion: tty port open/close methods tty: stallion: Convert to the tty_port_open/close methods ...
2009-12-11usb_serial: Kill port mutexAlan Cox
The tty port has a port mutex used for all the port related locking so we don't need the one in the USB serial layer any more. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB OTG: Add generic driver for ULPI OTG transceiverDaniel Mack
This adds a minimal generic driver for ULPI connected transceivers, using the OTG framework functions recently introduced. The driver got a table to match the ULPI chips, which currently only has one entry for NXP's ISP 1504 transceiver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB OTG: add support for ulpi connected external transceiversDaniel Mack
This adds support for OTG transceivers directly connected to the ULPI interface. In particular, the following details are added - a struct for low level io functions (read/write) - a priv field to be used as 'viewport' by low level access functions - an (*init) and (*shutdown) callbacks, along with static inline helpers - a (*set_vbus) callback to switch the port power on and off - a flags field for per-transceiver settings - some defines for the flags bitmask to configure platform specific details Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB gadget: Handle endpoint requests at the function levelLaurent Pinchart
Control requests targeted at an endpoint (that is sent to EP0 but specifying the target endpoint address in wIndex) are dispatched to the current configuration's setup callback, requiring all gadget drivers to dispatch the requests to the correct function driver. To avoid this, record which endpoints are used by each function in the composite driver SET CONFIGURATION handler and dispatch requests targeted at endpoints to the correct function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-04tree-wide: fix misspelling of "definition" in commentsAdam Buchbinder
"Definition" is misspelled "defintion" in several comments; this patch fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-03usbnet & cdc-ether: Autosuspend for online devicesOliver Neukum
Using remote wakeup and delayed transmission to allow online device to go into usb autosuspend. Minimal alternate support for devices that don't support remote wakeup. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sfc/sfe4001.c drivers/net/wireless/libertas/cmd.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/rtl8187se/Kconfig drivers/staging/rtl8192e/Kconfig
2009-11-10usbnet: Set link down initially for drivers that update link stateBen Hutchings
Some usbnet drivers update link state while others do not due to hardware limitations. Add a flag to distinguish those that do, and set the link down initially for their devices. This is intended to fix this bug: http://bugs.debian.org/444043 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-09USB: serial: don't call release without attachAlan Stern
This patch (as1295) fixes a recently-added bug in the USB serial core. If certain kinds of errors occur during probing, the core may call a serial driver's release method without previously calling the attach method. This causes some drivers (io_ti in particular) to perform an invalid memory access. The patch adds a new flag to keep track of whether or not attach has been called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-05usbnet: Use wwan%d interface name for mobile broadband devicesMarcel Holtmann
Add support for usbnet based devices like CDC-Ether to indicate that they are actually mobile broadband devices. In that case use wwan%d as default interface name. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
2009-09-23USB: ehci-dbgp: errata for EHCI debug controller initializationJason Wessel
On some EHCI usb debug controllers, the EHCI debug device will fail to be seen after a port reset, after a warm reset. Two options exist to get the device to initialize correctly. Option 1 is to unplug and plug in the device. Option 2 is to use the EHCI port test to get the usb debug device to start talking again. At that point the debug controller port reset will succeed. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> CC: dbrownell@users.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: ehci-dbgp,ehci: Allow early or late use of the dbgp deviceJason Wessel
If the EHCI debug port is initialized and in use, the EHCI host controller driver must follow two rules. 1) If the EHCI host driver issues a controller reset, the debug controller driver re-initialization must get called after the reset is completed. 2) The EHCI host driver should ignore any requests to the physical EHCI debug port when the EHCI debug port is in use. The code to check for the debug port was moved from ehci_pci_reinit() to ehci_pci_setup because it must get called prior to ehci_reset() which will clear the debug port registers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: dbrownell@users.sourceforge.net Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: ehci-dbgp: stability improvements and external re-initJason Wessel
This patch implements several changes: 1) Improve the capability to debug the dbgp driver The dbgp_ehci_status() was added in a number of places to report the critical ehci registers to diagnose the cause of a failure of the ehci-dbgp driver. 2) Capability to survive the host controller initialization The dbgp_external_startup(), dbgp_not_safe, and dbgp_phys_port were added so as to allow the ehci-dbgp to re-initialize after the ehci host controller is reset by the standard host controller driver. This same routine is common for the early startup or re-initialization. This resulted in the need to move some of the initialization code out of the __init section because the ehci driver has the possibility to be loaded later on as a kernel module. 3) Stability improvements for device initialization The device enumeration from 0 to 127 has the possibility to fail the first time after a warm reset on some older EHCI debug controllers. The enumeration will be tried up to 3 times to account for this failure case. The dbg_wait_until_complete() was changed to wait up to 250 ms before failing which only comes into play during device initialization. The maximum delay will never get hit during the course of normal operation of the driver, unless the device got unplugged or there was a ehci controller failure, in which case the dbgp device driver will shut itself down. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: dbrownell@users.sourceforge.net Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: ehci,dbgp,early_printk: split ehci debug driver from early_printk.cJason Wessel
Move the dbgp early printk driver in advance of refactoring and adding new code, so the changes to this code are tracked separately from the move of the code. The drivers/usb/early directory will be the location of the current and future early usb code for driving usb devices prior initializing the standard interrupt driven USB drivers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: use kfifo to buffer usb-generic serial writesDavid VomLehn
When do_output_char() attempts to write a carriage return/line feed sequence, it first checks to see how much buffer room is available. If there are at least two characters free, it will write the carriage return/line feed with two calls to tty_put_char(). It calls the tty_operation functions write() for devices that don't support the tty_operations function put_char(). If the USB generic serial device's write URB is not in use, it will return the buffer size when asked how much room is available. The write() of the carriage return will cause it to mark the write URB busy, so the subsequent write() of the line feed will be ignored. This patch uses the kfifo infrastructure to implement a write FIFO that accurately returns the amount of space available in the buffer. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: audio: guard kernel-only code with __KERNEL__Michael S. Tsirkin
include/linux/usb/audio.h is exported to userspace, so part of this file that is for internal kernel usage need to be guarded with ifdef __KERNEL__. This way make headers_install will stript it out. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: NXP ISP1362 USB host driverLothar Wassmann
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: isp1760: allow platform devices to customize devflagsMichael Hennerich
Platform device support was merged earlier, but support for boards to customize the devflags aspect of the controller was not. We want this on Blackfin systems to control the bus width, but might as well expose all of the fields while we're at it. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: EHCI: Add Intel Moorestown EHCI controller HOSTPCx extensions and ↵Alek Du
support phy low power mode The Intel Moorestown EHCI controller supports non-standard HOSTPCx register extension. This register controls the LPM behaviour and controls the behaviour of each USB port. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB audio gadget: Un-inline generic_[gs]et_cmdLaurent Pinchart
Those functions are used only used to fill the set/get members of usb_audio_control. It doesn't make much sense to inline them. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB audio gadget: Prefix all macro definitions with UAC_ in linux/usb/audio.hLaurent Pinchart
linux/usb/audio.h is a public header file that includes definitions exported to userspace. To avoid namespace clashes, prefix all macro definitions with UAC_. Existing macros and structures prefixed with USB_AC_ and USB_AS_ are renamed for consistency. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: Move vendor subclass definition from usb/audio.h to usb/ch9.hLaurent Pinchart
USB_SUBCLASS_VENDOR_SPEC is common to several USB classes and as such belongs to usb/ch9.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23USB: Move endpoint sync type definitions from usb/audio.h to usb/ch9.hLaurent Pinchart
And use the new definitions in the USB Audio Class gadget driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-22smsc95xx: fix transmission where ZLP is expectedSteve Glendinning
Usbnet framework assumes USB hardware doesn't handle zero length packets, but SMSC LAN95xx requires these to be sent for correct operation. This patch fixes an easily reproducible tx lockup when sending a frame that results in exactly 512 bytes in a USB transmission (e.g. a UDP frame with 458 data bytes, due to IP headers and our USB headers). It adds an extra flag to usbnet for the hardware driver to indicate that it can handle and requires the zero length packets. This patch should not affect other usbnet users, please also consider for -stable. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-19tty: USB serial termios bitsAlan Cox
Various drivers have hacks to mangle termios structures. This stems from the fact there is no nice setup hook for configuring the termios settings when the port is created Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: USB does not need the filp argument in the driversAlan Cox
And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-16Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sh/kernel/vmlinux.lds.S
2009-09-15Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (213 commits) V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2 V4L/DVB (12713): em28xx: Cleanups at ir_i2c handler V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent object V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a persistent object V4L/DVB (12698): em28xx: ir-kbd-i2c init data needs a persistent object V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111 V4L/DVB (12706): gspca - sn9c20x: disable exposure/gain controls for MT9M111 sensors. V4L/DVB (12705): gspca - sn9c20x: Add SXGA support to SOI968 V4L/DVB (12703): gspca - sn9c20x: Reduces size of object V4L/DVB (12704): gspca - sn9c20x: Fix exposure on SOI968 sensors V4L/DVB (12696): gspca - sonixj / sn9c102: Two drivers for 0c45:60fc and 0c45:613e. V4L/DVB (12695): gspca - vc032x: Do the LED work with the sensor hv7131r. V4L/DVB (12694): gspca - vc032x: Change the start exchanges of the sensor hv7131r. V4L/DVB (12693): gspca - sunplus: The brightness is signed. V4L/DVB (12692): gspca - sunplus: Optimize code. V4L/DVB (12691): gspca - sonixj: Don't use mdelay(). V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added. V4L/DVB (12686): dvb-core: check supported QAM modulations V4L/DVB (12685): dvb-core: check fe->ops.set_frontend return value ...
2009-09-12V4L/DVB (12187): uvcvideo: Move UVC definitions to linux/usb/video.hLaurent Pinchart
To make UVC constants accessible by a future UVC gadget driver, move them from drivers/media/video/uvc/uvcvideo.h to include/linux/usb/video.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-01usbnet: convert to netdev_tx_tStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14usbnet: add rx queue pausingJussi Kivilinna
Add rx queue pausing to usbnet. This is needed by rndis_wlan so that it can control rx queue and prevent received packets from being send forward before rndis_wlan receives and handles 'media connect'-indication. Without this establishing WPA connections is hard and fail often. [v2] - removed unneeded use of skb_clone Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: arch/microblaze/include/asm/socket.h
2009-08-04rndis_wlan: handle 802.11 indications from deviceJussi Kivilinna
Add handling for 802.11 specific rndis indications. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_host: allow rndis_wlan to see all indicationsJussi Kivilinna
Allow rndis_wlan to see all indications. Currently rndis_host lets rndis_wlan to know about link state changes only, but there is whole set of other 802.11-specific indications that rndis_wlan should handle properly. So rename link_change() to indication() and convert rndis_wlan to use it. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04usbnet: allow "minidriver" to prevent urb unlinking on usbnet_stopJussi Kivilinna
rndis_wlan devices freeze after running usbnet_stop several times. It appears that firmware freezes in state where it does not respond to any RNDIS commands and device have to be physically unplugged/replugged. This patch lets minidrivers to disable unlink_urbs on usbnet_stop through new info flag. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-23usb: m66592-udc platform data on_chip supportMagnus Damm
Convert the m66592-udc driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_BUILT_IN_M66592 ugliness. This makes the code cleaner and also allows us to support both external and internal m66592 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip m66592 without modifying the Kconfig. The patch adds a m66592 header file for platform data and ties in platform data to the existing m66592 devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23usb: move r8a66597 register definesMagnus Damm
Move r8a66597 hardware register definitions from the host controller header file to the platform data header file. With this change in place we can easily share register definitions between the host controller driver and a future gadget driver. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-20usb: r8a66597-hcd platform data on_chip supportMagnus Damm
Convert the r8a66597-hcd driver to use the on_chip flag from platform data to enable on chip behaviour instead of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness. This makes the code cleaner and also allows us to support both external and internal r8a66597 with the same kernel. It also makes the Kconfig part more future proof since we with this patch can add support for new processors with on-chip r8a66597 without modifying the Kconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-12Revert "USB: Add Intel Langwell USB OTG Transceiver Drive"Greg Kroah-Hartman
This reverts commit 453f77558810ffa669ed5a510a7173ec49def396. The driver should not have been accepted as the MSRT code is not in the main kernel yet, which this depends on. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Hao Wu <hao.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-10tty: Fix USB kref leakAlan Cox
The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-10usbnet: Add stop function pointer to 'struct rndis_data'.Jussi Kivilinna
Allow minidriver to know that netdev has stopped. This is to let wireless turn off radio when usbnet dev is stopped. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-30usbnet: Remove private stats structureHerbert Xu
Now that nothing uses the private stats structure we can remove it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15USB: Change names of SuperSpeed ep companion descriptor structs.Sarah Sharp
Differentiate between SuperSpeed endpoint companion descriptor and the wireless USB endpoint companion descriptor. Make all structure names for this descriptor have "ss" (SuperSpeed) in them. David Vrabel asked for this change in http://marc.info/?l=linux-usb&m=124091465109367&w=2 Reported-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Parse and store the SuperSpeed endpoint companion descriptors.Sarah Sharp
The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Add SuperSpeed to the list of USB device speeds.Sarah Sharp
Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed". This is 5.0 Gbps (wire speed). There are probably more places that check for speed that I've missed. SuperSpeed devices have a 512 byte endpoint 0 max packet size. This shows up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus spec). xHCI spec says that the xHC can handle intervals up to 2^15 microframes. That might change when real silicon becomes available. Add FIXME note for SuperSpeed isochronous endpoints. They can transmit up to 16 packets in one "burst" before they wait for an acknowledgment of the packets. They can do up to 3 bursts per microframe (determined by the mult value in the endpoint companion descriptor). The xHCI driver doesn't have support for isoc yet, so fix this later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Add Intel Langwell USB OTG Transceiver DriveHao Wu
Description: This driver is used for Intel Langwell* USB OTG controller in Intel Moorestown* platform. It tries to implement host/device role switch according to OTG spec. The actual hsot and device functions are accomplished in modified EHCI driver and Intel Langwell USB OTG client controller driver. * Langwell and Moorestown are names used in development. They are not approved official name. Note: This patch is the first version Intel Langwell USB OTG Transceiver driver. The development is not finished, and the bug fixing is on going for some hardware and software issues. The main purpose of this submission is for code view. Supported features: - Data-line Pulsing SRP - Support HNP to switch roles - PCI D0/D3 power management support Known issues: - HNP is only tested with another Moorestown platform. - PCI D0/D3 power management support is not fully tested. - VBus Pulsing SRP is not support in current version. Signed-off-by: Hao Wu <hao.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: Add Intel Langwell USB Device Controller driverXiaochen Shen
Intel Langwell USB Device Controller is a High-Speed USB OTG device controller in Intel Moorestown platform. It can work in OTG device mode with Intel Langwell USB OTG transceiver driver as well as device-only mode. The number of programmable endpoints is different through controller revision. NOTE: This patch is the first version Intel Langwell USB OTG device controller driver. The bug fixing is on going for some hardware and software issues. Intel Langwell USB OTG transceiver driver and EHCI driver patches will be submitted later. Supported features: - USB OTG protocol support with Intel Langwell USB OTG transceiver driver (turn on CONFIG_USB_LANGWELL_OTG) - Support control, bulk, interrupt and isochronous endpoints (isochronous not tested) - PCI D0/D3 power management support - Link Power Management (LPM) support Tested gadget drivers: - g_file_storage - g_ether - g_zero The passed tests: - g_file_storage: USBCV Chapter 9 tests - g_file_storage: USBCV MSC tests - g_file_storage: from/to host files copying - g_ether: ping, ftp and scp files from/to host - Hotplug, with and without hubs Known issues: - g_ether: failed part of USBCV chap9 tests - LPM support not fully tested TODO: - g_ether: pass all USBCV chap9 tests - g_zero: pass usbtest tests - Stress tests on different gadget drivers - On-chip private SRAM caching support Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>