aboutsummaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2009-01-04sanitize audit_mq_notify()Al Viro
* don't copy_from_user() twice * don't bother with allocations * don't duplicate parts of audit_dummy_context() * make it return void Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04sanitize audit_mq_getsetattr()Al Viro
* get rid of allocations * make it return void * don't duplicate parts of audit_dummy_context() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04sanitize audit_ipc_set_perm()Al Viro
* get rid of allocations * make it return void * simplify callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04sanitize audit_ipc_obj()Al Viro
* get rid of allocations * make it return void * simplify callers Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04sanitize audit_socketcallAl Viro
* don't bother with allocations * now that it can't fail, make it return void Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-04mfd: dm355evm msp430 driverDavid Brownell
Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add WM8351 supportMark Brown
The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Support configurable numbers of DCDCs and ISINKs on WM8350Mark Brown
Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add WM8352 supportMark Brown
The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Dialog DA9030 battery charger MFD driverMike Rapoport
This patch amends DA903x MFD driver with definitions and methods needed for battery charger driver. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: twl4030 regulator bug fixesDavid Brownell
This contains two bugfixes to the initial twl4030 regulator support patch related to USB: (a) always overwrite the old list of consumers ... else the regulator handles all use the same "usb1v5" name; (b) don't set up the "usbcp" regulator, which turns out to be managed through separate controls, usually ULPI directly from the OTG controller. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: twl4030: create some regulator devicesDavid Brownell
Initial code to create twl4030 voltage regulator devices, using the new regulator framework. Note that this now starts to care what name is used to declare the TWL chip: - TWL4030 is the "old" chip; newer ones have a bigger variety of VAUX2 voltages. - TWL5030 is the core "new" chip; TPS65950 is its catalog version. - The TPS65930 and TPS65920 are cost-reduced catalog versions of TWL5030 parts ... fewer regulators, no battery charger, etc. Board-specific regulator configuration should be provided, listing which regulators are used and their constraints (e.g. 1.8V only). Code that could ("should"?) leverage the regulator stuff includes TWL4030 USB transceiver support and MMC glue, LCD support for the 3430SDP and Labrador boards, and S-Video output. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: twl4030: cleanup symbols and OMAP dependencyDavid Brownell
Finish removing dependency of TWL driver stack on platform-specific IRQ definitions ... and remove the build dependency on OMAP. This lets the TWL4030 code be included in test builds for most platforms, and will make it easier for non-OMAP folk to update most of this code for new APIs etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04power_supply: Add battery health reporting for WM8350Mark Brown
Implement support for reporting battery health in the WM8350 battery interface. Since we are now able to report this via the classs remove the diagnostics from the interrupt handler. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04power_supply: Add cold to the POWER_SUPPLY_HEALTH report valuesMark Brown
Some systems are able to report problems with batteries being under temperature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Refactor WM8350 chip identificationMark Brown
Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Switch WM8350 revision detection to a feature based modelMark Brown
Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04power_supply: Add support for WM8350 PMUMark Brown
This patch adds support for the PMU provided by the WM8350 which implements battery, line and USB supplies including a battery charger. The hardware functions largely autonomously, with minimal software control required to initiate fast charging. Support for configuration of the USB supply is not yet implemented. This means that the hardware will remain in the mode configured at startup, by default limiting the current drawn from USB to 100mA. This driver was originally written by Liam Girdwood with subsequent updates for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: allow reading entire register banks on twl4030David Brownell
Minor change to the TWL4030 utility interface: support reads of all 256 bytes in each register bank (vs just 255). This can help when debugging, but is otherwise a NOP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add AUXADC support for WM8350Mark Brown
The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add WM8350 revision H supportMark Brown
No other software changes are required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04intel-iommu: fix build error with INTR_REMAP=y and DMAR=nIngo Molnar
dmar.o can be built in the CONFIG_INTR_REMAP=y case but iommu_calculate_agaw() is only available if VT-d is built as well. So create an inline version of iommu_calculate_agaw() for the !CONFIG_DMAR case. The iommu->agaw value wont be used in this case, but the code is cleaner (has less #ifdefs) if we have it around unconditionally. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-04HID: avoid sparse warning in HID_COMPAT_LOAD_DRIVERHannes Eder
Impact: include a prototype for the exported function in the macro Fix about 20 of this warnings: drivers/hid/hid-a4tech.c:162:1: warning: symbol 'hid_compat_a4tech' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add dynids facilityJiri Slaby
Allow adding new devices to the hid drivers on the fly without a need of kernel recompilation. Now, one can test a driver e.g. by: echo 0003:045E:00F0.0003 > ../generic-usb/unbind echo 0003 045E 00F0 > new_id from some driver subdir. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: move usbhid flags to usbhid.hJiri Slaby
Move usbhid specific flags from global hid.h into local usbhid.h. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add phys and name ioctls to hidrawJiri Kosina
The hiddev interface provides ioctl() calls which can be used to obtain phys and raw name of the underlying device. Add the corresponding support also into hidraw. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-03Merge branch 'cpus4096-for-linus-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
2009-01-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu: (89 commits) AMD IOMMU: remove now unnecessary #ifdefs AMD IOMMU: prealloc_protection_domains should be static kvm/iommu: fix compile warning AMD IOMMU: add statistics about total number of map requests AMD IOMMU: add statistics about allocated io memory AMD IOMMU: add stats counter for domain tlb flushes AMD IOMMU: add stats counter for single iommu domain tlb flushes AMD IOMMU: add stats counter for cross-page request AMD IOMMU: add stats counter for free_coherent requests AMD IOMMU: add stats counter for alloc_coherent requests AMD IOMMU: add stats counter for unmap_sg requests AMD IOMMU: add stats counter for map_sg requests AMD IOMMU: add stats counter for unmap_single requests AMD IOMMU: add stats counter for map_single requests AMD IOMMU: add stats counter for completion wait events AMD IOMMU: add init code for statistic collection AMD IOMMU: add necessary header defines for stats counting AMD IOMMU: add Kconfig entry for statistic collection code AMD IOMMU: use dev_name in iommu_enable function AMD IOMMU: use calc_devid in prealloc_protection_domains ...
2009-01-03Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (34 commits) V4L/DVB (10173): Missing v4l2_prio_close in radio_release V4L/DVB (10172): add DVB_DEVICE_TYPE= to uevent V4L/DVB (10171): Use usb_set_intfdata V4L/DVB (10170): tuner-simple: prevent possible OOPS caused by divide by zero error V4L/DVB (10168): sms1xxx: fix inverted gpio for lna control on tiger r2 V4L/DVB (10167): sms1xxx: add support for inverted gpio V4L/DVB (10166): dvb frontend: stop using non-C99 compliant comments V4L/DVB (10165): Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2 V4L/DVB (10164): Add missing S2 caps flag to S2API V4L/DVB (10163): em28xx: allocate adev together with struct em28xx dev V4L/DVB (10162): tuner-simple: Fix tuner type set message V4L/DVB (10161): saa7134: fix autodetection for AVer TV GO 007 FM Plus V4L/DVB (10160): em28xx: update chip id for em2710 V4L/DVB (10157): Add USB ID for the Sil4701 radio from DealExtreme V4L/DVB (10156): saa7134: Add support for Avermedia AVer TV GO 007 FM Plus V4L/DVB (10155): Add TEA5764 radio driver V4L/DVB (10154): saa7134: fix a merge conflict on Behold H6 board V4L/DVB (10153): Add the Beholder H6 card to DVB-T part of sources. V4L/DVB (10152): Change configuration of the Beholder H6 card V4L/DVB (10151): Fix I2C bridge error in zl10353 ...
2009-01-03sparseirq: move set/get_timer_rand_state back to .cYinghai Lu
those two functions only used in that C file Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: warn about voltage mismatches mmc_spi: Add support for OpenFirmware bindings pxamci: fix dma_unmap_sg length mmc_block: ensure all sectors that do not have errors are read drivers/mmc: Move a dereference below a NULL test sdhci: handle built-in sdhci with modular leds class mmc: balanc pci_iomap with pci_iounmap mmc_block: print better error messages mmc: Add mmc_vddrange_to_ocrmask() helper function ricoh_mmc: Handle newer models of Ricoh controllers mmc: Add 8-bit bus width support sdhci: activate led support also when module mmc: trivial annotation of 'blocks' pci: use pci_ioremap_bar() in drivers/mmc sdricoh_cs: Add support for Bay Controller devices mmc: at91_mci: reorder timer setup and mmc_add_host() call
2009-01-03Merge branch 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'cputime' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [PATCH] fast vdso implementation for CLOCK_THREAD_CPUTIME_ID [PATCH] improve idle cputime accounting [PATCH] improve precision of idle time detection. [PATCH] improve precision of process accounting. [PATCH] idle cputime accounting [PATCH] fix scaled & unscaled cputime accounting
2009-01-03Merge branch 'master' of ↵Mike Travis
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask Conflicts: arch/x86/kernel/io_apic.c kernel/rcuclassic.c kernel/sched.c kernel/time/tick-sched.c Signed-off-by: Mike Travis <travis@sgi.com> [ mingo@elte.hu: backmerged typo fix for io_apic.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03VT-d: remove now unused intel_iommu_found functionJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt domain iova_to_phys function for IOMMU APIJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt domain map and unmap functions for IOMMU APIJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt device attach and detach functions for IOMMU APIJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03VT-d: adapt domain init and destroy functions for IOMMU APIJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03KVM: change KVM to use IOMMU APIJoerg Roedel
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03introcude linux/iommu.h for an iommu apiJoerg Roedel
This patch introduces the API to abstract the exported VT-d functions for KVM into a generic API. This way the AMD IOMMU implementation can plug into this API later. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03Deassign device in kvm_free_assgined_deviceWeidong Han
In kvm_iommu_unmap_memslots(), assigned_dev_head is already empty. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03KVM: support device deassignmentWeidong Han
Support device deassignment, it can be used in device hotplug. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03KVM: use the new intel iommu APIsWeidong Han
intel iommu APIs are updated, use the new APIs. In addition, change kvm_iommu_map_guest() to just create the domain, let kvm_iommu_assign_device() assign device. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03Change intel iommu APIs of virtual machine domainWeidong Han
These APIs are used by KVM to use VT-d Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03calculate agaw for each iommuWeidong Han
"SAGAW" capability may be different across iommus. Use a default agaw, but if default agaw is not supported in some iommus, choose a less supported agaw. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03intel-iommu: move iommu_prepare_gfx_mapping() out of dma_remapping.hMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: kill off duplicate def of dmar_disabledMark McLoughlin
This is only used in dmar.c and intel-iommu.h, so dma_remapping.h seems like the appropriate place for it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move struct device_domain_info out of dma_remapping.hMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move struct dmar_domain def out dma_remapping.hMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-01-03intel-iommu: move DMA PTE defs out of dma_remapping.hMark McLoughlin
DMA_PTE_READ/WRITE are needed by kvm. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-10 21:43:47 +0000