aboutsummaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2008-10-16dmar: fix using early fixmap mapping for DMAR table parsingYinghai Lu
Very early detection of the DMAR tables will setup fixmap mapping. For parsing these tables later (while enabling dma and/or interrupt remapping), early fixmap mapping shouldn't be used. Fix it by calling table detection routines again, which will call generic apci_get_table() for setting up the correct mapping. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16sparseirq: move kstat_irqs from kstat to irq_desc - fixYinghai Lu
fix non-sparseirq architectures. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16pci: change msi-x vector to 32bitYinghai Lu
we are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the cache for irq number should be 32 bit too. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: remove irqbalance in kernel for 32 bitYinghai Lu
This has been deprecated for years, the user space irqbalanced utility works better with numa, has configurable policies, etc... Signed-off-by: Yinghai Lu <yhlu.kernel@gmai.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use 28 bits irq NR for pci msi/msix and htYinghai Lu
also print out irq no in /proc/interrups and /proc/stat in hex, so could tell bus/dev/func. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: put irq_2_iommu pointer into irq_descYinghai Lu
when CONFIG_HAVE_SPARSE_IRQ preallocate some irq_2_iommu entries, and use get_one_free_irq_2_iomm to get new one and link to irq_desc if needed. else will use dyn_array or static array. v2: <= nr_irqs fix Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: separate sparse_irqs from sparse_irqs_freeYinghai Lu
so later don't need compare with -1U Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86_64: rename irq_desc/irq_desc_allocYinghai Lu
change names: irq_desc() ==> irq_desc_alloc __irq_desc() ==> irq_desc Also split a few of the uses in lowlevel x86 code. v2: need to check if desc is null in smp_irq_move_cleanup Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: add irq_desc in function in parameterYinghai Lu
So we could remove some duplicated calling to irq_desc v2: make sure irq_desc in init/main.c is not used without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq, fs/proc: replace loop with nr_irqs for proc/statYinghai Lu
Replace another nr_irqs loop to avoid the allocation of all sparse irq entries - use for_each_irq_desc instead. v2: make sure arch without GENERIC_HARDIRQS works too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: replace loop with nr_irqs with for_each_irq_descYinghai Lu
There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: add irq_desc_without_newYinghai Lu
add an irq_desc accessor that will not allocate any sparse entry but returns failure if there's no entry present. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: move kstat_irqs from kstat to irq_descYinghai Lu
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: put timer_rand_state pointer into irq_descYinghai Lu
irq_timer_state[] is a NR_IRQS sized array that is a side-by array to the real irq_desc[] array. Integrate that field into the (now dynamic) irq_desc dynamic array and save some RAM. v2: keep the old way to support arch not support irq_desc Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: sparse irqs: use irq_desc() together with dyn_array, instead of ↵Yinghai Lu
irq_desc[] add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: make irqs in kernel stat use per_cpu_dyn_arrayYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: make irq_desc to use dyn_arrayYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: introduce nr_irqsYinghai Lu
at this point nr_irqs is equal NR_IRQS convert a few easy users from NR_IRQS to dynamic nr_irqs. v2: according to Eric, we need to take care of arch without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: alloc dyn_array all togetherYinghai Lu
so could spare some memory with small alignment in bootmem also tighten the alignment checking, and make print out less debug info. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16add per_cpu_dyn_array supportYinghai Lu
allow dyn-array in per_cpu area, allocated dynamically. usage: | /* in .h */ | struct kernel_stat { | struct cpu_usage_stat cpustat; | unsigned int *irqs; | }; | | /* in .c */ | DEFINE_PER_CPU(struct kernel_stat, kstat); | | DEFINE_PER_CPU_DYN_ARRAY_ADDR(per_cpu__kstat_irqs, per_cpu__kstat.irqs, sizeof(unsigned int), nr_irqs, sizeof(unsigned long), NULL); after setup_percpu()/per_cpu_alloc_dyn_array(), the dyn_array in per_cpu area is ready to use. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: add dyn_array supportYinghai Lu
Allow crazy big arrays via bootmem at init stage. Architectures use CONFIG_HAVE_DYN_ARRAY to enable it. usage: | static struct irq_desc irq_desc_init __initdata = { | .status = IRQ_DISABLED, | .chip = &no_irq_chip, | .handle_irq = handle_bad_irq, | .depth = 1, | .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock), | #ifdef CONFIG_SMP | .affinity = CPU_MASK_ALL | #endif | }; | | static void __init init_work(void *data) | { | struct dyn_array *da = data; | struct irq_desc *desc; | int i; | | desc = *da->name; | | for (i = 0; i < *da->nr; i++) | memcpy(&desc[i], &irq_desc_init, sizeof(struct irq_desc)); | } | | struct irq_desc *irq_desc; | DEFINE_DYN_ARRAY(irq_desc, sizeof(struct irq_desc), nr_irqs, PAGE_SIZE, init_work); after pre_alloc_dyn_array() after setup_arch(), the array is ready to be used. Via this facility we can replace irq_desc[NR_IRQS] array with dyn_array irq_desc[nr_irqs]. v2: remove _nopanic in pre_alloc_dyn_array() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16Merge branch 'linus' into genirqIngo Molnar
2008-10-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits) HID: build drivers for all quirky devices by default HID: add missing blacklist entry for Apple ATV ircontrol HID: add support for Bright ABNT2 brazilian device HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers HID: fix numlock led on Dell device 0x413c/0x2105 HID: remove warn() macro from usb hid drivers HID: remove info() macro from usb HID drivers HID: add appletv IR receiver quirk HID: fix a lockup regression when using force feedback on a PID device HID: hiddev.h: Fix example code. HID: hiddev.h: Fix mixed space and tabs in example code. HID: convert to dev_* prints HID: remove hid-ff HID: move zeroplus FF processing HID: move thrustmaster FF processing HID: move pantherlord FF processing HID: fix incorrent length condition in hidraw_write() HID: fix tty<->hid deadlock HID: ignore iBuddy devices HID: report descriptor fix for remaining MacBook JIS keyboards ...
2008-10-14HID: fix a lockup regression when using force feedback on a PID deviceAnssi Hannula
Commit 8006479c9b75fb6594a7b746af3d7f1fbb68f18f introduced a spinlock in input_dev->event_lock, which is locked when handling input events. However, the hid-pidff driver sleeps when handling events as it waits for reports being sent to the device before changing the report contents again. This causes a system lockup when trying to use force feedback with a PID device, a regression introduced in 2.6.24 and 2.6.23.15. Fix it by extracting the raw report data from struct hid_report immediately when hid_submit_report() is called, therefore allowing drivers to change the contents of struct hid_report immediately without affecting the already-queued transfer. In hid-pidff, re-add the removed usbhid_wait_io() to pidff_erase_effect() instead, to prevent a full report queue from causing the submission to fail, thus not freeing up device memory. pidff_erase_effect() is not called while dev->event_lock is held. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: hiddev.h: Fix example code.Antonio Ospite
Fix hiddev.h example code. To get the correct usage code, you need to set report_type and report_id. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: hiddev.h: Fix mixed space and tabs in example code.Antonio Ospite
Fix mixed space and tabs in example code. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: remove hid-ffJiri Slaby
hid-ff.c now calls only pidff (generic driver), the special ones are now in separate drivers. Invoke pidff on all non-special directly. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move zeroplus FF processingJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move thrustmaster FF processingJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move pantherlord FF processingJiri Slaby
Move the force feedback processing into a separate module. [jkosina@suse.cz: fix Kconfig texts a little bit] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move logitech FF processingJiri Slaby
Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move reset leds quirkJiri Slaby
Move the handling of the leds resetting from the core to the dell and logitech drivers. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move connect quirksJiri Slaby
Move connecting from usbhid to the hid layer and fix also hidp in that manner. This removes all the ignore/force hidinput/hiddev connecting quirks. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move sony quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: remove rdesc quirk supportJiri Slaby
Remove support for both dynamic and static report descriptor quirks. There is no longer rdesc code which it would support, so it's useless. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: remove hid-input-quirksJiri Slaby
Remove the file since these is no user now. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move samsung quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move monterey quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move petalynx quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move ezkey quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move cherry quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move a4tech quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move cypress quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move sunplus quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move microsoft quirksJiri Slaby
Move them from the core code to a separate driver. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: add compat supportJiri Slaby
Add compat option to hid code to allow loading of all modules on systems which don't allow autoloading because of old userspace. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move apple quirksJiri Slaby
Move them from the core code to a separate driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move ignore quirksJiri Slaby
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output warning when ENODEV is error code in usbhid and try ordinal input in hidp when that error is returned. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move logitech quirksJiri Slaby
Move them from the core and input code to a separate driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move usage input mapping to hid.hJiri Slaby
This mapping are currently used on 2 placces and will be needed by more quirk drivers, so move them to hid.h to allow them to use it. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>