aboutsummaryrefslogtreecommitdiff
path: root/include/media
AgeCommit message (Collapse)Author
2007-10-09V4L/DVB (6118): ivtv-fb: add missing FBIO_WAITFORVSYNC ioctl defineHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6088): cx2341x: some controls can't be changed while the device is busyHans Verkuil
The driver should now pass the 'busy' state of the device to the cx2341x module whenever controls are set or tried. -EBUSY will be returned if the device is busy and the user attempts to modify certain 'dangerous' controls. It concerns controls that change the audio or video compression mode and bitrates. The cx88-blackbird and pvrusb2 drivers currently always pass '0' (not busy) to the cx2341x, effectively keeping the old behavior for now. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5978): tuner: Better tuner radio supportTrent Piepho
Add radio support for the Thomson DTT7612 tuner. This tuner uses a different 1st intermediate frequency than the other radio tuners supported (a lot of NTSC radio tuners probably need this change too). Add a new tuner-simple parameter, radio_if. It selects the 1st IF used for radio reception. The radio frequency setting code in tuner-simple now uses this field, instead of a special case select() block for each tuner with radio support. The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1 in tuner-types.c. The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and fm_gain_normal = 1. Add some defines for tda9887 bits that control IF setting in radio mode. Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz radio IF. Fix the way tda9887 radio options work. The driver was modifying the default radio mode config templates based on the TDA9887_XXXX flags. This means that _all_ tuners would get the same settings. If you had a one tuner than used TDA9887_GAIN_NORMAL and one that didn't, both would get the setting. Now the tda9987 driver just checks if tuner mode is radio and then applies the config settings directly to the data being sent, just like how all the TV mode settings already work. The PLL setting math is made a little more accurate. And a grammar error in a printk is fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5934): dvb-ttpci/saa7146: Replace saa7146_i2c_transfer by generic ↵Oliver Endriss
i2c_transfer Convert av7110_v4l.c to use i2c_transfer() instead of saa7146_i2c_transfer(). Make saa7146_i2c_transfer() static. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5929): Add vp27smpx driverHans Verkuil
This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5913): Clean up duplicate includes in include/media/Jesper Juhl
This patch cleans up duplicate includes in include/media/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5905): ivtv-fb: Use proper ioctl valueHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5902): Add ivtv-fb framebuffer driver.Hans Verkuil
Add the ivtv-fb framebuffer driver for cx23415 devices (currently only the Hauppauge PVR-350 cards). This makes it possible to use the On-Screen Display functionality of these cards, either for menus during MPEG playback, or as a console or X display. Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5883): V4L: Fix a compile warning on non-32-bit machines.Sakari Ailus
Fix a compile warning on non-32-bit machines in v4l2-int-device.h. Add internal ioctl interface fallback function for ioctls with one argument. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (5862): V4L: Add internal ioctl-like interface.Sakari Ailus
This patch adds an internal ioctl-like interface which can be used in situations where a single Video4Linux device is implemented by multiple device drivers. One master device controls one or more slave devices. The slaves provide Video4Linux ioctl-like interface for the use of the master. Only a handful of ioctls are implemented at the moment. More can (and should) be added as more functionality is required. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6220a): fix build error for et61x251 driverLinus Torvalds
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5835): saa7146/dvb-ttpci: Fix signedness warnings (gcc 4.1.1, ↵Oliver Endriss
kernel 2.6.22) Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5793): Tuner: remove hardware-specific info from public headerMichael Krufky
Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5753): Tuner: create struct tuner_operationsMichael Krufky
Move tuner callback function pointers out of struct tuner, into struct tuner_operations. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5741): Tuner: add release callbackMichael Krufky
Individual tuner drivers are now allocating memory themselves for their own private data structures. This changeset adds a release callback to the tuner operations, so that newer drivers that may require more complex data structures may release this private data themselves. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5719): Tuner: Move device-specific private data out of tuner structMichael Krufky
Create private data struct for device specific private data. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L/DVB (5563a): Add experimental support for tea5761 tunerMauro Carvalho Chehab
This driver were made based on tea5761 specs. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-09V4L/DVB (5592): DMA: Correctly free resources on error, sync PCI streamed dataJon Burgess
I added saa7146_vmalloc_destroy_pgtable() which frees the resources allocated by saa7146_vmalloc_build_pgtable() and updated the callers in budget-core.c and av7110.c. I have also been through the updated functions and updated the error paths to ensure they free all allocated resources on error. I also realised that there are other callers to saa7146_pgtable_free() which did not have any sg DMA mapped so it seems wrong to add the pci_unmap_sg() into that function. Instead I created saa7146_vmalloc_destroy_pgtable() to do this. Also included in this patch are the previous fixes for pci_unmap_sg() and syncing the PCI streamed data to work with a SWIOTLB and match the requirements documented in DMA-API.txt. Signed-off-by: Jon Burgess <jburgess777@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-09V4L/DVB (5591): Saa7146: proper prototype for saa7146_video_do_ioctl()Adrian Bunk
This patch adds a proper prototype for saa7146_video_do_ioctl() in include/media/saa7146_vv.h. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-01i2c: Cleanup the includes of <linux/i2c.h>Jean Delvare
Clean up the includes of <linux/i2c.h>. Only include this header file when we actually need it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-04-27V4L/DVB (5355): Add VIDIOC_G_CHIP_IDENT to various i2c modulesHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoderHans Verkuil
It took three core maintainers, over four years of work, eight new i2c modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac support from Axel Thimm, (hardware) support from Hauppauge, support and assistance from the v4l-dvb people and the many, many users of ivtv to finally make it possible to merge this driver into the kernel. Thank you all! Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5341): Add cx23415/6 chip idents.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5336): Cx23416 doc updates + rename CX2341X_ENC_UNKNOWNHans Verkuil
The documentation of Several miscellaneous commands was updated. As a result of which the CX2341X_ENC_UNKNOWN command was renamed to CX2341X_ENC_SET_VERT_CROP_LINE. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5323): Updated support for tuner callbacksHartmut Hackmann
This change supplies a more generic version of the tuner callback. The tuner struct now has a function pointer int (*tuner_callback) (void *dev, int command, int arg) additionally to a int config parameter. both can be set through the TUNER_SET_TYPE_ADDR client call. Note that the meaning of the parameters depend on the tuner type. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5313): Added a config entry and a gpio function pointer to tuner structHartmut Hackmann
These entries mainly are to support configurations of the tda827x silicon tuner with a preamplifier. The values can be set throgh the attach inform or through the extended TUNER_SET_TYPE_ADDR client call. The function pointer will only be updated if the parameter is not NULL. Since a typecast is necessary to set the pointer, i added a typedef for this pointer (tuner_gpio_func_t) in tuner.h Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5306): Add support for VIDIOC_G_CHIP_IDENTHans Verkuil
VIDIOC_G_CHIP_IDENT improves debugging of card problems: it can be used to detect which chips are on the board and based on that information selected register dumps can be made, making it easy to debug complicated media chips containing tens or hundreds of registers. This ioctl replaces the internal VIDIOC_INT_G_CHIP_IDENT ioctl. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5290): Add support for VIDIOC_INT_G/S_STD_OUTPUTHans Verkuil
Added VIDIOC_INT_G_STD_OUTPUT and VIDIOC_INT_S_STD_OUTPUT to allow drivers to set the TV standard for video output separately from the video capture. This is needed for cx23415 support where the decoder is separate from the encoder and can have a different TV standard. Modified the saa7127 module to listen to VIDIOC_INT_G/S_STD_OUTPUT instead of VIDIOC_G/S_STD. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5289): Add support for video output overlays.Hans Verkuil
Add V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY support. Also add support for local and global alpha overlays. Add new field enums V4L2_FIELD_INTERLACED_TB and V4L2_FIELD_INTERLACED_BT. These changes are needed to support the ivtv On Screen Display features. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5268): Add support for three new MPEG controls.Hans Verkuil
Added V4L2_CID_MPEG_AUDIO_MUTE, V4L2_CID_MPEG_VIDEO_MUTE and V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS controls together with their implementation in the cx2341x module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-27V4L/DVB (5441): Saa7146: Fix allocation of clipping memoryOliver Endriss
Olaf Hering pointed out that SAA7146_CLIPPING_MEM would become very large for PAGE_SIZE > 4K. In fact, the number of clipping windows is limited to 16, and calculate_clipping_registers_rect() does not use more than 256 bytes. SAA7146_CLIPPING_MEM adjusted accordingly. Thanks-to: Olaf Hering <olaf@aepfle.de> Acked-by: Michael Hunold <hunold@linuxtv.org> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-01V4L/DVB (5271): Add VIDIOC_TRY_ENCODER_CMD and VIDIOC_ENCODER_CMD ioctls.Hans Verkuil
Add support for starting, stopping, pausing and resuming an MPEG (or similar compressed stream) encoder. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-01V4L/DVB (5270): Add VIDIOC_G_ENC_INDEX ioctlHans Verkuil
The VIDIOC_G_ENC_INDEX ioctl can obtain the MPEG index from an MPEG encoder. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-01V4L/DVB (5304): Improve chip matching in v4l2_registerHans Verkuil
The chip matching in struct v4l2_register for VIDIOC_DBG_G/S_REGISTER was rather primitive. It could not be extended to other busses besides i2c and it lacked a way to. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5200): V4l_printk_ioctl_arg() is no longer used.Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5147): Make vivi driver to use vmalloced pointersMauro Carvalho Chehab
Before this patch, vivi were simulating a scatter gather DMA transfer. While this is academic, showing how stuff really works on a real PCI device, this means a non-optimized code. There are only two memory models that vivi implements: 1) kernel alloced memory. This is also used by read() method. On this case, a vmalloc32 buffer is allocated at kernel; 2) userspace allocated memory. This is used by most userspace apps. video-buf will store this pointer. a simple copy_to_user is enough to transfer data. The third memory model scenario supported by video-buf is overlay mode. This model is not implemented on vivi and unlikely to be implemented on newer drivers, since now, most userspace apps do some post-processing (like de-interlacing). After this patch, some cleanups may be done at video-buf.c to avoid allocating pages, when the driver doesn't need a PCI buffer. This is the case of vivi and usb drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5146): Make VIDIOC_INT_[SG]_REGISTER ioctls no longer internal onlyTrent Piepho
The direct register access ioctls were defined as kernel internal only, but they are very useful for debugging hardware from userspace and are used as such. Officially export them. VIDIOC_INT_[SG]_REGISTER is renamed to VIDIOC_DBG_[SG]_REGISTER Definition of ioctl and struct v4l2_register is moved from v4l2-common.h to videodev2.h. Types used in struct v4l2_register are changed to the userspace exportable versions (u32 -> __u32, etc). Use of VIDIOC_DBG_S_REGISTER requires CAP_SYS_ADMIN permission, so move the check into the video_ioctl2() dispatcher so it doesn't need to be duplicated in each driver's call-back function. CAP_SYS_ADMIN check is added to pvrusb2 (which doesn't use video_ioctl2). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5144): Restore VIDIOC_INT_[SG]_REGISTER callsTrent Piepho
Add support for these ioctls to the video_ioctl2 system and the cx88 driver. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5113): Adds video output routingMarco Schluessler
Nexus CA needs to use a different routing on saa7115 module. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5070): Budget-ci: add support for the Technotrend 1500 bundled remoteVille-Pekka Vainio
The keymap is based on a previous patch by Jussi Kukkonen. This remote is identified by subsystem_device id 0x1010. Signed-off-by: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5017): DVB: fix compile errorAdrian Bunk
This patch fixes the following compile error: <-- snip --> ... LD drivers/media/video/built-in.o drivers/media/video/saa7134/built-in.o:(.data+0x85ec): multiple definition of `ir_rc5_remote_gap' drivers/media/video/bt8xx/built-in.o:(.data+0x734c): first defined here drivers/media/video/saa7134/built-in.o:(.data+0x85f0): multiple definition of `ir_rc5_key_timeout' drivers/media/video/bt8xx/built-in.o:(.data+0x7350): first defined here make[4]: *** [drivers/media/video/built-in.o] Error 1 <-- snip --> Since this variables were needlessly global, this patch implements the trivial fix of making them static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5015): Add support for more Encore TV cardsJuan Pablo Sormani
Signed-off-by: Juan Pablo Sormani <sorman@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (4986): Removed unimplemented cx2341x API commandsHans Verkuil
The commands CX2341X_DEC_SET_AUDIO_OUTPUT, CX2341X_DEC_SET_AV_DELAY and CX2341X_ENC_SET_3_2_PULLDOWN are not implemented in the Conexant firmware. So these commands are removed. This also means that the V4L2_CID_MPEG_VIDEO_PULLDOWN control in cx2341x.c and pvrusb2-hdw.c is removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (4961): Add support for the ASUS P7131 remote controlHermann Pitton
Besides adding the board specific code, this patch moves the RC5 decoding code from bt8xx to ir-functions.c to make it available for all drivers. Signed-off-by: Marc Fargas <telenieko.telenieko.com> Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-27V4L/DVB (5001): Add two required headers on kernel 2.6.20-rc1Mauro Carvalho Chehab
include/media/ir-common.h:78: error: field 'work' has incomplete type drivers/media/common/ir-functions.c: In function 'ir_rc5_timer_end': drivers/media/common/ir-functions.c:301: error: 'jiffies' undeclared (first use in this function) drivers/media/common/ir-functions.c:301: error: (Each undeclared identifier is reported only once) drivers/media/common/ir-functions.c:301: error: for each function it appears in.) drivers/media/common/ir-functions.c:347: error: 'HZ' undeclared (first use in this function) Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-27V4L/DVB (4988): Cx2341x audio_properties is an u16, not u8Hans Verkuil
This bug broke the MPEG audio mode controls. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4935): Added the capability of selecting fm gain by tunerMauro Carvalho Chehab
Some tuners require using cGainNormal instead of cGainLow for high sensibility on FM reception. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4934): Usbvision radio requires GainNormal at e registerMauro Carvalho Chehab
Adds an option to select GainNormal at tda9887 and make usbvision to use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4917): Saa7146: Convert SAA7146_IER_{DIS,EN}ABLE macros to inline ↵Oliver Endriss
functions Convert SAA7146_IER_{DIS,EN}ABLE macros to inline functions. Fixes a problem with macro expansion (reported by C.Y.M). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4914): Saa7146: Protect access to the IER register by a spinlockHartmut Birr
Protect the access to the IER register of the SAA7146 by the device spinlock. I2C transfers may use interrupt mode now. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>