aboutsummaryrefslogtreecommitdiff
path: root/include/net
AgeCommit message (Collapse)Author
2009-03-16netfilter: conntrack: don't deliver events for racy packetsPablo Neira Ayuso
This patch skips the delivery of conntrack events if the packet was drop due to a race condition in the conntrack insertion. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-16netfilter: use a linked list of loggersEric Leblond
This patch modifies nf_log to use a linked list of loggers for each protocol. This list of loggers is read and write protected with a mutex. This patch separates registration and binding. To be used as logging module, a module has to register calling nf_log_register() and to bind to a protocol it has to call nf_log_bind_pf(). This patch also converts the logging modules to the new API. For nfnetlink_log, it simply switchs call to register functions to call to bind function and adds a call to nf_log_register() during init. For other modules, it just remove a const flag from the logger structure and replace it with a __read_mostly. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-15tcp: simplify tcp_current_mssIlpo Järvinen
There's very little need for most of the callsites to get tp->xmit_goal_size updated. That will cost us divide as is, so slice the function in two. Also, the only users of the tp->xmit_goal_size are directly behind tcp_current_mss(), so there's no need to store that variable into tcp_sock at all! The drop of xmit_goal_size currently leaves 16-bit hole and some reorganization would again be necessary to change that (but I'm aiming to fill that hole with u16 xmit_goal_size_segs to cache the results of the remaining divide to get that tso on regression). Bring xmit_goal_size parts into tcp.c Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-15tcp: consolidate paws checkIlpo Järvinen
Wow, it was quite tricky to merge that stream of negations but I think I finally got it right: check & replace_ts_recent: (s32)(rcv_tsval - ts_recent) >= 0 => 0 (s32)(ts_recent - rcv_tsval) <= 0 => 0 discard: (s32)(ts_recent - rcv_tsval) > TCP_PAWS_WINDOW => 1 (s32)(ts_recent - rcv_tsval) <= TCP_PAWS_WINDOW => 0 I toggled the return values of tcp_paws_check around since the old encoding added yet-another negation making tracking of truth-values really complicated. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03netns: Remove net_aliveEric W. Biederman
It turns out that net_alive is unnecessary, and the original problem that led to it being added was simply that the icmp code thought it was a network device and wound up being unable to handle packets while there were still packets in the network namespace. Now that icmp and tcp have been fixed to properly register themselves this problem is no longer present and we have a stronger guarantee that packets will not arrive in a network namespace then that provided by net_alive in netif_receive_skb. So remove net_alive allowing packet reception run a little faster. Additionally document the strong reason why network namespace cleanup is safe so that if something happens again someone else will have a chance of figuring it out. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02sctp: Fix broken RTO-doubling for data retransmitsVlad Yasevich
Commit faee47cdbfe8d74a1573c2f81ea6dbb08d735be6 (sctp: Fix the RTO-doubling on idle-link heartbeats) broke the RTO doubling for data retransmits. If the heartbeat was sent before the data T3-rtx time, the the RTO will not double upon the T3-rtx expiration. Distingish between the operations by passing an argument to the function. Additionally, Wei Youngjun pointed out that our treatment of requested HEARTBEATS and timer HEARTBEATS is the same wrt resetting congestion window. That needs to be separated, since user requested HEARTBEATS should not treat the link as idle. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02tcp: tcp_init_wl / tcp_update_wl argument cleanupHantzis Fotis
The above functions from include/net/tcp.h have been defined with an argument that they never use. The argument is 'u32 ack' which is never used inside the function body, and thus it can be removed. The rest of the patch involves the necessary changes to the function callers of the above two functions. Signed-off-by: Hantzis Fotis <xantzis@ceid.upatras.gr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02tcp: kill eff_sacks "cache", the sole user can calculate itselfIlpo Järvinen
Also fixes insignificant bug that would cause sending of stale SACK block (would occur in some corner cases). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02tcp: add helper for AI algorithmIlpo Järvinen
It seems that implementation in yeah was inconsistent to what other did as it would increase cwnd one ack earlier than the others do. Size benefits: bictcp_cong_avoid | -36 tcp_cong_avoid_ai | +52 bictcp_cong_avoid | -34 tcp_scalable_cong_avoid | -36 tcp_veno_cong_avoid | -12 tcp_yeah_cong_avoid | -38 = -104 bytes total Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-02-27cfg80211: Add AP beacon regulatory hintsLuis R. Rodriguez
When devices are world roaming they cannot beacon or do active scan on 5 GHz or on channels 12, 13 and 14 on the 2 GHz band. Although we have a good regulatory API some cards may _always_ world roam, this is also true when a system does not have CRDA present. Devices doing world roaming can still passive scan, if they find a beacon from an AP on one of the world roaming frequencies we make the assumption we can do the same and we also remove the passive scan requirement. This adds support for providing beacon regulatory hints based on scans. This works for devices that do either hardware or software scanning. If a channel has not yet been marked as having had a beacon present on it we queue the beacon hint processing into the workqueue. All wireless devices will benefit from beacon regulatory hints from any wireless device on a system including new devices connected to the system at a later time. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: move all regulatory hints to workqueueLuis R. Rodriguez
All regulatory hints (core, driver, userspace and 11d) are now processed in a workqueue. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: make regulatory_request use wiphy_idx instead of wiphyLuis R. Rodriguez
We do this so later on we can move the pending requests onto a workqueue. By using the wiphy_idx instead of the wiphy we can later easily check if the wiphy has disappeared or not. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Add software scan notifiersMichael Buesch
This adds optional notifier functions for software scan. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211/cfg80211: move iwrange handler to cfg80211Johannes Berg
The previous patch made cfg80211 generally aware of the signal type a given hardware will give, so now it can implement SIOCGIWRANGE itself, removing more wext stuff from mac80211. Might need to be a little more parametrized once we have more hardware using cfg80211 and new hardware capabilities. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27cfg80211: clean up signal typeJohannes Berg
It wasn't a good idea to make the signal type a per-BSS option, although then it is closer to the actual value. Move it to be a per-wiphy setting, update mac80211 to match. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27nl80211: Provide access to STA TX/RX packet countersJouni Malinen
The TX/RX packet counters are needed to fill in RADIUS Accounting attributes Acct-Output-Packets and Acct-Input-Packets. We already collect the needed information, but only the TX/RX bytes were previously exposed through nl80211. Allow applications to fetch the packet counters, too, to provide more complete support for accounting. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27nl80211: Optional IEs into scan requestJouni Malinen
This extends the NL80211_CMD_TRIGGER_SCAN command to allow applications to specify a set of information element(s) to be added into Probe Request frames with NL80211_ATTR_IE. This provides support for the MLME-SCAN.request primitive parameter VendorSpecificInfo and can be used, e.g., to implement WPS scanning. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: Extend the rate control API with an update callbackSujith
The AP can switch dynamically between 20/40 Mhz channel width, in which case we switch the local operating channel, but the rate control algorithm is not notified. This patch adds a new callback to indicate such changes to the RC algorithm. Currently, HT channel width change is notified, but this callback can be used to indicate any new requirements that might come up later on. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27mac80211: fix aggregation for hardware with ampdu queuesJohannes Berg
Hardware with AMPDU queues currently has broken aggregation. This patch fixes it by making all A-MPDUs go over the regular AC queues, but keeping track of the hardware queues in mac80211. As a first rough version, it actually stops the AC queue for extended periods of time, which can be removed by adding buffering internal to mac80211, but is currently not a huge problem because people rarely use multiple TIDs that are in the same AC (and iwlwifi currently doesn't operate as AP). This is a short-term fix, my current medium-term plan, which I hope to execute soon as well, but am not sure can finish before .30, looks like this: 1) rework the internal queuing layer in mac80211 that we use for fragments if the driver stopped queue in the middle of a fragmented frame to be able to queue more frames at once (rather than just a single frame with its fragments) 2) instead of stopping the entire AC queue, queue up the frames in a per-station/per-TID queue during aggregation session initiation, when the session has come up take all those frames and put them onto the queue from 1) 3) push the ampdu queue layer abstraction this patch introduces in mac80211 into the driver, and remove the virtual queue stuff from mac80211 again This plan will probably also affect ath9k in that mac80211 queues the frames instead of passing them down, even when there are no ampdu queues. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27make net/ieee80211.h private to ipw2x00Dan Williams
Only ipw2x00 now uses it. Reduce confusion. Profit! Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-26inet fragments: fix sparse warning: context imbalanceHannes Eder
Impact: Attribute function with __releases(...) Fix this sparse warning: net/ipv4/inet_fragment.c:276:35: warning: context imbalance in 'inet_frag_find' - unexpected unlock Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27Bluetooth: Ask upper layers for HCI disconnect reasonMarcel Holtmann
Some of the qualification tests demand that in case of failures in L2CAP the HCI disconnect should indicate a reason why L2CAP fails. This is a bluntly layer violation since multiple L2CAP connections could be using the same ACL and thus forcing a disconnect reason is not a good idea. To comply with the Bluetooth test specification, the disconnect reason is now stored in the L2CAP connection structure and every time a new L2CAP channel is added it will set back to its default. So only in the case where the L2CAP channel with the disconnect reason is really the last one, it will propagated to the HCI layer. The HCI layer has been extended with a disconnect indication that allows it to ask upper layers for a disconnect reason. The upper layer must not support this callback and in that case it will nicely default to the existing behavior. If an upper layer like L2CAP can provide a disconnect reason that one will be used to disconnect the ACL or SCO link. No modification to the ACL disconnect timeout have been made. So in case of Linux to Linux connection the initiator will disconnect the ACL link before the acceptor side can signal the specific disconnect reason. That is perfectly fine since Linux doesn't make use of this value anyway. The L2CAP layer has a perfect valid error code for rejecting connection due to a security violation. It is unclear why the Bluetooth specification insists on having specific HCI disconnect reason. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Add CID field to L2CAP socket address structureMarcel Holtmann
In preparation for L2CAP fixed channel support, the CID value of a L2CAP connection needs to be accessible via the socket interface. The CID is the connection identifier and exists as source and destination value. So extend the L2CAP socket address structure with this field and change getsockname() and getpeername() to fill it in. The bind() and connect() functions have been modified to handle L2CAP socket address structures of variable sizes. This makes them future proof if additional fields need to be added. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Request L2CAP fixed channel list if availableMarcel Holtmann
If the extended features mask indicates support for fixed channels, request the list of available fixed channels. This also enables the fixed channel features bit so remote implementations can request information about it. Currently only the signal channel will be listed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Don't enforce authentication for L2CAP PSM 1 and 3Marcel Holtmann
The recommendation for the L2CAP PSM 1 (SDP) is to not use any kind of authentication or encryption. So don't trigger authentication for incoming and outgoing SDP connections. For L2CAP PSM 3 (RFCOMM) there is no clear requirement, but with Bluetooth 2.1 the initiator is required to enable authentication and encryption first and this gets enforced. So there is no need to trigger an additional authentication step. The RFCOMM service security will make sure that a secure enough link key is present. When the encryption gets enabled after the SDP connection setup, then switch the security level from SDP to low security. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Fix double L2CAP connection requestMarcel Holtmann
If the remote L2CAP server uses authentication pending stage and encryption is enabled it can happen that a L2CAP connection request is sent twice due to a race condition in the connection state machine. When the remote side indicates any kind of connection pending, then track this state and skip sending of L2CAP commands for this period. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Fix race condition with L2CAP information requestMarcel Holtmann
When two L2CAP connections are requested quickly after the ACL link has been established there exists a window for a race condition where a connection request is sent before the information response has been received. Any connection request should only be sent after an exchange of the extended features mask has been finished. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Use general bonding whenever possibleMarcel Holtmann
When receiving incoming connection to specific services, always use general bonding. This ensures that the link key gets stored and can be used for further authentications. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Add SCO fallback for eSCO connection attemptsMarcel Holtmann
When attempting to setup eSCO connections it can happen that some link manager implementations fail to properly negotiate the eSCO parameters and thus fail the eSCO setup. Normally the link manager is responsible for the negotiation of the parameters and actually fallback to SCO if no agreement can be reached. In cases where the link manager is just too stupid, then at least try to establish a SCO link if eSCO fails. For the Bluetooth devices with EDR support this includes handling packet types of EDR basebands. This is particular tricky since for the EDR the logic of enabling/disabling one specific packet type is turned around. This fix contains an extra bitmask to disable eSCO EDR packet when trying to fallback to a SCO connection. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Pause RFCOMM TX when encryption dropsMarcel Holtmann
A role switch with devices following the Bluetooth pre-2.1 standards or without Encryption Pause and Resume support is not possible if encryption is enabled. Most newer headsets require the role switch, but also require that the connection is encrypted. For connections with a high security mode setting, the link will be immediately dropped. When the connection uses medium security mode setting, then a grace period is introduced where the TX is halted and the remote device gets a change to re-enable encryption after the role switch. If not re-enabled the link will be dropped. Based on initial work by Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Replace RFCOMM link mode with security levelMarcel Holtmann
Change the RFCOMM internals to use the new security levels and remove the link mode details. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Replace L2CAP link mode with security levelMarcel Holtmann
Change the L2CAP internals to use the new security levels and remove the link mode details. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Add enhanced security model for Simple PairingMarcel Holtmann
The current security model is based around the flags AUTH, ENCRYPT and SECURE. Starting with support for the Bluetooth 2.1 specification this is no longer sufficient. The different security levels are now defined as SDP, LOW, MEDIUM and SECURE. Previously it was possible to set each security independently, but this actually doesn't make a lot of sense. For Bluetooth the encryption depends on a previous successful authentication. Also you can only update your existing link key if you successfully created at least one before. And of course the update of link keys without having proper encryption in place is a security issue. The new security levels from the Bluetooth 2.1 specification are now used internally. All old settings are mapped to the new values and this way it ensures that old applications still work. The only limitation is that it is no longer possible to set authentication without also enabling encryption. No application should have done this anyway since this is actually a security issue. Without encryption the integrity of the authentication can't be guaranteed. As default for a new L2CAP or RFCOMM connection, the LOW security level is used. The only exception here are the service discovery sessions on PSM 1 where SDP level is used. To have similar security strength as with a Bluetooth 2.0 and before combination key, the MEDIUM level should be used. This is according to the Bluetooth specification. The MEDIUM level will not require any kind of man-in-the-middle (MITM) protection. Only the HIGH security level will require this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Add support for deferring RFCOMM connection setupMarcel Holtmann
In order to decide if listening RFCOMM sockets should be accept()ed the BD_ADDR of the remote device needs to be known. This patch adds a socket option which defines a timeout for deferring the actual connection setup. The connection setup is done after reading from the socket for the first time. Until then writing to the socket returns ENOTCONN. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-27Bluetooth: Add global deferred socket parameterMarcel Holtmann
The L2CAP and RFCOMM applications require support for authorization and the ability of rejecting incoming connection requests. The socket interface is not really able to support this. This patch does the ground work for a socket option to defer connection setup. Setting this option allows calling of accept() and then the first read() will trigger the final connection setup. Calling close() would reject the connection. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-02-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/orinoco/orinoco.c
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-02-22netns: Remove net_aliveEric W. Biederman
It turns out that net_alive is unnecessary, and the original problem that led to it being added was simply that the icmp code thought it was a network device and wound up being unable to handle packets while there were still packets in the network namespace. Now that icmp and tcp have been fixed to properly register themselves this problem is no longer present and we have a stronger guarantee that packets will not arrive in a network namespace then that provided by net_alive in netif_receive_skb. So remove net_alive allowing packet reception run a little faster. Additionally document the strong reason why network namespace cleanup is safe so that if something happens again someone else will have a chance of figuring it out. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-20netfilter: nf_conntrack: table max size should hold at least table sizeHagen Paul Pfeifer
Table size is defined as unsigned, wheres the table maximum size is defined as a signed integer. The calculation of max is 8 or 4, multiplied the table size. Therefore the max value is aligned to unsigned. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-02-18netfilter: nf_conntrack: don't try to deliver events for untracked connectionsPatrick McHardy
The untracked conntrack actually does usually have events marked for delivery as its not special-cased in that part of the code. Skip the actual delivery since it impacts performance noticeably. Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-02-17net: Kill skb_truesize_check(), it only catches false-positives.David S. Miller
A long time ago we had bugs, primarily in TCP, where we would modify skb->truesize (for TSO queue collapsing) in ways which would corrupt the socket memory accounting. skb_truesize_check() was added in order to try and catch this error more systematically. However this debugging check has morphed into a Frankenstein of sorts and these days it does nothing other than catch false-positives. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-16sctp: Inherit all socket options from parent correctly.Vlad Yasevich
During peeloff/accept() sctp needs to save the parent socket state into the new socket so that any options set on the parent are inherited by the child socket. This was found when the parent/listener socket issues SO_BINDTODEVICE, but the data was misrouted after a route cache flush. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-16sctp: Fix the RTO-doubling on idle-link heartbeatsVlad Yasevich
SCTP incorrectly doubles rto ever time a Hearbeat chunk is generated. However RFC 4960 states: On an idle destination address that is allowed to heartbeat, it is recommended that a HEARTBEAT chunk is sent once per RTO of that destination address plus the protocol parameter 'HB.interval', with jittering of +/- 50% of the RTO value, and exponential backoff of the RTO if the previous HEARTBEAT is unanswered. Essentially, of if the heartbean is unacknowledged, do we double the RTO. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-16sctp: Clean up sctp checksumming codeVlad Yasevich
The sctp crc32c checksum is always generated in little endian. So, we clean up the code to treat it as little endian and remove all the __force casts. Suggested by Herbert Xu. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-16sctp: Allow to disable SCTP checksums via module parameterLucas Nussbaum
This is a new version of my patch, now using a module parameter instead of a sysctl, so that the option is harder to find. Please note that, once the module is loaded, it is still possible to change the value of the parameter in /sys/module/sctp/parameters/, which is useful if you want to do performance comparisons without rebooting. Computation of SCTP checksums significantly affects the performance of SCTP. For example, using two dual-Opteron 246 connected using a Gbe network, it was not possible to achieve more than ~730 Mbps, compared to 941 Mbps after disabling SCTP checksums. Unfortunately, SCTP checksum offloading in NICs is not commonly available (yet). By default, checksums are still enabled, of course. Signed-off-by: Lucas Nussbaum <lucas.nussbaum@ens-lyon.fr> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15ip: support for TX timestamps on UDP and RAW socketsPatrick Ohly
Instructions for time stamping outgoing packets are take from the socket layer and later copied into the new skb. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15net: socket infrastructure for SO_TIMESTAMPINGPatrick Ohly
The overlap with the old SO_TIMESTAMP[NS] options is handled so that time stamping in software (net_enable_timestamp()) is enabled when SO_TIMESTAMP[NS] and/or SO_TIMESTAMPING_RX_SOFTWARE is set. It's disabled if all of these are off. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-14Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-02-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6