aboutsummaryrefslogtreecommitdiff
path: root/include/scsi/scsi_transport_iscsi.h
AgeCommit message (Collapse)Author
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-25[SCSI] iscsi class: fix slab corruption during restartMike Christie
The transport class recv mempools are causing slab corruption. We could hack around netlink's lack of mempool support like dm, but it is just too ulgy (dm's hack is ugly enough :) when you need to support broadcast. This patch removes the recv pools. We have not used them even when we were allocting 20 MB per session and the system only had 64 MBs. And we have no pools on the send side and have been ok there. When Peter's work gets merged we can use that since the network guys are in favor of that approach and are not going to add mempools everywhere. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28[SCSI] iscsi bugfixes: fix oops when iser is flushing ioMike Christie
When we enter recovery and flush the running commands we cannot freee the connection before flushing the commands. Some commands may have a reference to the connection that needs to be released before. iscsi_stop was forcing the term and suspend too early and was causing a oops in iser, so this patch removes those callbacks all together and allows the LLD to handle that detail. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: add async notification of session eventsMike Christie
This patch adds or modifies the transport class functions used to notify userspace of session state events. We modify the session addition up event and add a destruction event to notify userspace of session creation, relogin and destruction. And we modify the conn error event to be sent by broadcast since multiple listeners may want to listen for it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: pass target nr to session creationMike Christie
So the drivers do not use the channel numbers, but some do use the target numbers. We were just adding some goofy variable that just increases for the target nr. This is useless for software iscsi because it is always zero. And for qla4xxx the target nr is actually the index of the target/session in its FW or FLASH tables. We needed to expose this to userspace so apps could access those numbers so this patch just adds the target nr to the iscsi session creation functions. This way when qla4xxx's Hw thinks a session is at target nr 4 in its hw, it is exposed as that number in sysfs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: break up session creation into two stagesMike Christie
qla4xxx is initialized in two steps like other HW drivers. It allocates the host, sets up the HW, then adds the host. For iscsi part of HW setup is setting up persistent iscsi sessions. At that time, the interupts are off and the driver is not completely set up so we just want to allocate them. We do not want to add them to sysfs and expose them to userspace because userspace could try to do lots of fun things with them like scanning and at that time the driver is not ready. So this patch breakes up the session creation like other functions that use the driver model in two the alloc and add parts. When the driver is ready, it can then add the sessions and userspace can begin using them. This also fixes a bug in the addition error patch where we forgot to do a get on the session. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: rm channel usage from iscsiMike Christie
I do not remember what I was thinking when we added the channel as a argument to the session create function. It was probably due to too much cut and paste work from the FC transport class. The channel is meaningless for iscsi drivers so this patch drops its usage everywhere in the iscsi related code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: fixup set/get param functionsMike Christie
Reduce duplication in the software iscsi_transport modules by adding a libiscsi function to handle the common grunt work. This also has the drivers return specifc -EXXX values for different errors so userspace can finally handle them in a sane way. Also just pass the sysfs buffers to the drivers so HW iscsi can get/set its string values, like targetname, and initiatorname. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29[SCSI] iscsi: add target discvery event to transport classMike Christie
Patch from david.somayajulu@qlogic.com: Add target discovery event. We may have a setup where the iscsi traffic is on a different netowrk than the other network traffic. In this case we will want to do discovery though the iscsi card. This patch adds a event to the transport class that can be used by hw iscsi cards that support this. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-05[SCSI] iscsi: fix writepsace raceMike Christie
We can race and misset the suspend bit if iscsi_write_space is called then iscsi_send returns with a failure indicating there is no space. To handle this this patch returns a error upwards allowing xmitworker to decide if we need to try and transmit again. For the no write space case xmitworker will not retry, and instead let iscsi_write_space queue it back up if needed (this relies on the work queue code to properly requeue us if needed). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] iscsi: fix command requeues during iscsi recoveryMike Christie
Do not flush queues then block session. This will cause commands to needlessly swing around on us and remove goofy recovery_failed field and replace with state value. And do not start recovery from within the host reset function. This causeis too many problems becuase open-iscsi was desinged to call out to userspace then have userpscae decide if we should go into recovery or kill the session. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-10[SCSI] iscsi: add transport end point callbacksOr Gerlitz
add transport end point callbacks so iscsi drivers that cannot connect from userspace, like iscsi tcp, using sockets do not have to implement their own socket infrastructure. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[SCSI] iscsi: add libiscsiMike Christie
There is a lot of code duplcited between iscsi_tcp and the upcoming iscsi_iser driver. This patch puts the duplicated code in a lib. There is more code to move around but this takes care of the basics. For iscsi_offload if they use the lib we will probably move some things around. For example in the queuecommand we will not assume that the LLD wants to do queue_work, but it is better to handle that later when we know for sure what iscsi_offload looks like (we could probably do this for iscsi_iser though to). Ideally I would like to get the iscsi_transports modules to a place where all they really have to do is put data on the wire, but how to do that will hopefully be more clear when we see other modules like iscsi_offload. Or maybe iscsi_offload will not use the lib and it will just be iscsi_iser and iscsi_tcp and maybe the iscsi_tcp_tgt if that is allowed in mainline. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[SCSI] iscsi: fix up iscsi ehMike Christie
The current iscsi_tcp eh is not nicely setup for dm-multipath and performs some extra task management functions when they are not needed. The attached patch: - Fixes the TMF issues. If a session is rebuilt then we do not send aborts. - Fixes the problem where if the host reset fired, we would return SUCCESS even though we had not really done anything yet. This ends up causing problem with scsi_error.c's TUR. - If someone has turned on the userspace nop daemon code to try and detect network problems before the scsi command timeout we can now drop and clean up the session before the scsi command timesout and fires the eh speeding up the time it takes for a command to go from one patch to another. For network problems we fail the command with DID_BUS_BUSY so if failfast is set scsi_decide_disposition fails the command up to dm for it to try on another path. - And we had to add some basic iscsi session block code. Previously if we were trying to repair a session we would retrun a MLQUEUE code in the queuecommand. This worked but it was not the most efficient or pretty thing to do since it would take a while to relogin to the target. For iscsi_tcp/open-iscsi a lot of the iscsi error handler is in userspace the block code is pretty bare. We will be adding to that for qla4xxx. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[SCSI] iscsi: add sysfs attrs for uspace sync upMike Christie
For iscsi boot when going from initramfs to the real root we need to stop the userpsace iscsi daemon. To later restart it iscsid needs to be able to rebuild itself and part of that process is matching a session running the kernel with the iscsid representation. To do this the attached patch adds several required iscsi values. If the LLD does not provide them becuase, login is done in userspace, then the transport class and userspace set ths up for the LLD. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14[SCSI] iscsi: rm kernel iscsi handles usage for session and connectionMike Christie
from hare@suse.de and michaelc@cs.wisc.edu hw iscsi like qla4xxx does not allocate a host per session and for userspace it is difficult to restart iscsid using the "iscsi handles" for the session and connection, so this patch just has the class or userspace allocate the id for the session and connection. Note: this breaks userspace and requires users to upgrade to the newest open-iscsi tools. Sorry about his but open-iscsi is still too new to say we have a stable user-kernel api and we were not good nough designers to know that other hw iscsi drivers and iscsid itself would need such changes. Actually we sorta did but at the time we did not have the HW available to us so we could only guess. Luckily, the only tools hooking into the class are the open-iscsi ones or other tools like iscsitart hook into the open-iscsi engine from userspace or prgroams like anaconda call our tools so they are not affected. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] iscsi update: cleanup iscsi class interfaceMike Christie
From: michaelc@cs.wisc.edu fujita.tomonori@lab.ntt.co.jp da-x@monatomic.org and err path fixup from: ogerlitz@voltaire.com This patch cleans up that interface by having the lld and class pass a iscsi_cls_session or iscsi_cls_conn between each other when the function is used by HW and SW iscsi llds. This way the lld does not have to remember if it has to send a handle or pointer and a handle or pointer to connection, session or host. This also has the class verify the session handle that gets passed from userspace instead of using the pointer passed into the kernel directly. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14[SCSI] iscsi: seperate iscsi interface from setup functionsMike Christie
This is the second version of the patch to address Christoph's comments. Instead of doing the lib, I just kept everything in scsi_trnapsort_iscsi.c like the FC and SPI class. This was becuase the driver model and sysfs class is tied to the session and connection setup so separating did not buy very much at this time. The reason for this patch was becuase HW iscsi LLDs like qla4xxx cannot use the iscsi class becuase the scsi_host was tied to the interface and class code. This patch just seperates the session from scsi host so that LLDs that allocate the host per some resource like pci device can still use the class. This is also fixes a couple refcount bugs that can be triggered when users have a sysfs file open, close the session, then read or write to the file. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-06[SCSI] open-iscsi/linux-iscsi-5 Initiator: Header filesAlex Aizman
open-iscsi-headers.patch - common header files: - iscsi_if.h (user/kernel #defines and user/kernel events); - iscsi_proto.h (RFC3720 #defines and types); - scsi_transport_iscsi.h (transport API, transport #defines and types). Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!