aboutsummaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2005-10-30[PATCH] fix missing includesTim Schmielau
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28Merge branch 'master'Jeff Garzik
2005-10-28[PATCH] gfp_t: drivers/scsiAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-04Merge /spare/repo/linux-2.6/Jeff Garzik
2005-09-25[SCSI] allow REPORT LUN scanning even for LUN 0 PQ of 3James Bottomley
Currently we just ignore the device, which means there are a few arrays out there that we don't find. This patch updates the scsi_report_lun_scan() to take a target instead of a device so it can be called on a return of SCSI_SCAN_TARGET_PRESENT, which is what a PQ 3 device returns. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-24Merge /spare/repo/linux-2.6/Jeff Garzik
2005-09-19[SCSI] Fix thread termination for the SCSI error handleJames Bottomley
From: Alan Stern <stern@rowland.harvard.edu> This patch (as561) fixes the error handler's thread-exit code. The kthread_stop call won't wake the thread from a down_interruptible, so the patch gets rid of the semaphore and simply does set_current_state(TASK_INTERRUPTIBLE); Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Modified to simplify the termination loop and correct the sleep condition. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19[SCSI] fix oops on usb storage device disconnectJames Bottomley
We fix the oops by enforcing the host state model. There have also been two extra states added: SHOST_CANCEL_RECOVERY and SHOST_DEL_RECOVERY so we can take the model through host removal while the recovery thread is active. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-16[SCSI] change port speed definitions for scsi_transport_fcAndreas Herrmann
obviously FC Port Speeds in scsi_transport_fc.h are defined according to FC-HBA: #define FC_PORTSPEED_1GBIT 1 #define FC_PORTSPEED_2GBIT 2 #define FC_PORTSPEED_10GBIT 4 #define FC_PORTSPEED_4GBIT 8 Problem is, whoever invented FC-HBA did not care about FC-FS or FC-GS-x. Following FC-FS/FC-GS-x defintions of port speeds would look like: 1 GBit: 0x0001 2 GBit: 0x0002 4 GBit: 0x0004 10GBit: 0x0008 (and new in FC-LS: 8 Gbit: 0x0010 16GBit: 0x0020) I really appreciate if scsi_transport_fc.h would define port speeds according to FC-GS-x/FC-FS. Thus mapping of port speed capabilities to values defined in scsi_transport_fc.h can be avoided in the LLDD. Attached is a patch to change the definitions. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-14Merge /spare/repo/linux-2.6/ Jeff Garzik
2005-09-10[SCSI] Alter the scsi_add_device() API to conform to what users expectJames Bottomley
The original API returned either an ERR_PTR() or a refcounted sdev. Unfortunately, if it's successful, you need to do a scsi_device_put() on the sdev otherwise the refcounting is wrong. Everyone seems to expect that scsi_add_device() should be callable without doing the ref put, so alter the API so it is (we still have __scsi_add_device with the original behaviour). The only actual caller that needs altering is the one in firewire ... not because it gets this right, but because it acts on the error if one is returned. Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-10[SCSI] fc_transport: Generalize WWN to u64 interger conversions.Andrew Vasquez
On some platforms the hard-casting of 8 byte node_name and port_name arrays to an u64 would cause unaligned-access warnings. Generalize the conversions with a transport helper function which performs consistent shifting of WWN bytes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09[SCSI] SAS transport classChristoph Hellwig
The SAS transport class contains common code to deal with SAS HBAs, an aproximated representation of SAS topologies in the driver model, and various sysfs attributes to expose these topologies and managment interfaces to userspace. In addition to the basic SCSI core objects this transport class introduces two additional intermediate objects: The SAS PHY as represented by struct sas_phy defines an "outgoing" PHY on a SAS HBA or Expander, and the SAS remote PHY represented by struct sas_rphy defines an "incoming" PHY on a SAS Expander or end device. Note that this is purely a software concept, the underlying hardware for a PHY and a remote PHY is the exactly the same. There is no concept of a SAS port in this code, users can see what PHYs form a wide port based on the port_identifier attribute, which is the same for all PHYs in a port. This submission doesn't handle hot-plug addition or removal of SAS devices and thus doesn't do scanning in a workqueue yet, that will be added in phase2 after this submission. In a third phase I will add additional managment infrastructure. I think this submission is ready for 2.6.14, but additional comments are of course very welcome. I'd like to thanks James Smart a lot for his very useful input on the design. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-08Merge /spare/repo/linux-2.6/ Jeff Garzik
2005-09-06Merge by hand (conflicts in sd.c)James Bottomley
2005-09-06[SCSI] unexport scsi_add_timer/scsi_delete_timerChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06[SCSI] switch EH thread startup to the kthread APIChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29Merge upstream kernel into libata 'passthru' branchJeff Garzik
2005-08-28[SCSI] convert sd to scsi_execute_req (and update the scsi_execute_req API)James Bottomley
This one removes struct scsi_request entirely from sd. In the process, I noticed we have no callers of scsi_wait_req who don't immediately normalise the sense, so I updated the API to make it take a struct scsi_sense_hdr instead of simply a big sense buffer. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28[SCSI] convert SPI transport class to scsi_executeJames Bottomley
This one's slightly more difficult. The transport class uses REQ_FAILFAST, so another interface (scsi_execute) had to be invented to take the extra flag. Also, the sense functions are shifted around to allow spi_execute to place data directly into a struct scsi_sense_hdr. With this change, there's probably a lot of unnecessary sense buffer allocation going on which we can fix later. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28[SCSI] convert the remaining mid-layer pieces to scsi_execute_reqJames Bottomley
After this, we just have some drivers, all the ULDs and the SPI transport class using scsi_wait_req(). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28Merge HEAD from ../scsi-misc-2.6-tmp James Bottomley
2005-08-28[SCSI] use scatter lists for all block pc requests and simplify hw handlersJames Bottomley
Original From: Mike Christie <michaelc@cs.wisc.edu> Add scsi_execute_req() as a replacement for scsi_wait_req() Fixed up various pieces (added REQ_SPECIAL and caught req use after free) Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-14[SCSI] add ability to deny binding to SPI transport classJames Bottomley
This patch is necessary if we begin exposing underlying physical disks (which can attach to the SPI transport class) of the hardware RAID cards, since we don't want any SPI parameters binding to the RAID devices. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-10Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-08[SCSI] fix target scanning oops with fc transport classJames.Smart@Emulex.Com
We have some nasty issues with 2.6.12-rc6. Any request to scan on the lpfc or qla2xxx FC adapters will oops. What is happening is the system is defaulting to non-transport registered targets, which inherit the parent of the scan. On this second scan, performed by the attribute, the parent becomes the shost instead of the rport. The slave functions in the 2 FC adapters use starget_to_rport() routines, which incorrectly map the shost as an rport pointer. Additionally, this pointed out other weaknesses: - If the target structure is torn down outside of the transport, we have no method for it to be regenerated at the proper parent. - We have race conditions on the target being allocated by both the midlayer scan (parent=shost) and by the fc transport (parent=rport). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08[SCSI] add global timeout to the scsi mid-layerJames Bottomley
There are certain rogue devices (and the aic7xxx driver) that return BUSY or QUEUE_FULL forever. This code will apply a global timeout (of the total number of retries times the per command timer) to a given command. If it is exceeded, the command is completed regardless of its state. The patch also removes the unused field in the command: timeout and timeout_total. This solves the problem of detecting an endless loop in the mid-layer because of BUSY/QUEUE_FULL bouncing, but will not recover the device. In the aic7xxx case, the driver can be recovered by sending a bus reset, so possibly this should be tied into the error handler? Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03[SCSI] add missing hold_mcs parameter to the spi transport classJames Bottomley
This parameter is important only to people who take the time to tune the margin control settings, otherwise it's completely irrelevant. However, just in case anyone should want to do this, it's appropriate to include the parameter. I don't do anything with it in DV by design, so the parameter will come up as off by default, so if anyone actually wants to play with the margin control settings they'll have to enable it under the spi_transport class first. I also updated the transfer settings display to report all of the PPR settings instead of only DT, IU and QAS Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] add template for scsi_host_set_state()James Bottomley
Fixes up some warnings in the tree. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] host state model update: mediate host add/remove raceMike Anderson
Add support to not allow additions to a host when it is being removed. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] host state model update: replace old host bitmap stateMike Anderson
Migrate the current SCSI host state model to a model like SCSI device is using. Signed-off-by: Mike Anderson <andmike@us.ibm.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] fix function prototype warningJames Bottomley
int_to_scsilun() takes a pointer to a struct scsi_lun in it's prototype, so add this structure to scsi_device.h to avoid declaration inside function prototype warnings. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14[SCSI] add int_to_scsilun() functionJames.Smart@Emulex.Com
One of the issues we had was reverting the midlayers lun value into the 8byte lun value that we wanted to send to the device. Historically, there's been some combination of byte swapping, setting high/low, etc. There's also been no common thread between how our driver did it and others. I also got very confused as to why byteswap routines were being used. Anyway, this patch is a LLDD-callable function that reverts the midlayer's lun value, stored in an int, to the 8-byte quantity (note: this is not the real 8byte quantity, just the same amount that scsilun_to_int() was able to convert and store originally). This also solves the dilemma of the thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=112116767118981&w=2 A patch for the lpfc driver to use this function will be along in a few days (batched with other patches). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] add TYPE_RBC to our type tableJames Bottomley
Here's a tiny update that means we print the correct ASCII type information Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->stateChristoph Hellwig
We never look at it except for the old megaraid driver that abuses it for sending internal commands. That usage can be fixed easily because those internal commands are single-threaded by a mutex and we can easily use a completion there. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->ownerChristoph Hellwig
never checked anywhere Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->abort_reasonChristoph Hellwig
Never used for anything but printing it out in debug routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd.eh_stateChristoph Hellwig
it's never set to anything, and just three broken drivers are looking at it and doing odd things. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_set_deviceChristoph Hellwig
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-24[PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs ↵Markus Lidel
and 2400A workaround Changes: - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec controllers - Use PRIVATE messages in SCSI-OSM because on some controllers normal SCSI class commands like READ or READ CAPACITY cause errors - Use new DMA and SG list creation function - Added workaround to limit sectors per request for Adaptec 2400A controllers Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22Merge /spare/repo/linux-2.6/Jeff Garzik
2005-05-26Automatic merge of ../scsi-misc-2.6-old/James Bottomley
2005-05-26[SCSI] allow the HBA to reserve target and device private areasJames Bottomley
This patch basically allows any HBA attached to the SPI transport class to declare an extra area which the mid-layer will allocate as part of its device and target allocations. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26[SCSI] Add target alloc/destroy callbacks to the host templateJames Bottomley
This gives the HBA driver notice when a target is created and destroyed to allow it to manage its own target based allocations accordingly. This is a much reduced verson of the original patch sent in by James.Smart@Emulex.com Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26[SCSI] TYPE_RBC cache fixes (sbp2.c affected)Al Viro
a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off c) relevant places in midlayer and sd.c taught to accept TYPE_RBC d) sd.c::sd_read_cache_type() looks into page 6 when dealing with TYPE_RBC - these guys have writeback cache flag there and are not guaranteed to have page 8 at all. e) sd_read_cache_type() got an extra sanity check - it checks that it got the page it asked for before using its contents. And screams if mismatch had happened. Rationale: there are broken devices out there that are "helpful" enough to go for "I don't have a page you've asked for, here, have another one". For example, PL3507 had been caught doing just that... f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions in there are gone now. Incidentally, I wonder if USB storage devices that have no mode page 8 are simply RBC ones. I haven't touched that, but it might be interesting to check... Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26Automatic merge of ↵
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git branch HEAD
2005-05-20[SCSI] implement parameter limits in the SPI transport classJames Bottomley
There's a basic need not to have parameters go under or over certain values when doing domain validation. The basic ones are max_offset, max_width and min_period This patch makes the transport class take and enforce these three limits. Currently they can be set by the user, although they could obviously be read from the HBA's on-board NVRAM area during slave_configure (if it has one). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] add scsi changer driverGerd Knorr
This patch adds a device driver for scsi media changer devices. Signed-off-by: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-12[libata] ATA passthru (arbitrary ATA command execution)Jeff Garzik
Authors: Brett Russ <russb@emc.com> John W. Linville <linville@tuxdriver.com> Andy Warner <andyw@pobox.com>
2005-04-18merge by hand (scsi_device.h)James Bottomley