aboutsummaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2007-02-11Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (97 commits) [SCSI] zfcp: removed wrong comment [SCSI] zfcp: use of uninitialized variable [SCSI] zfcp: Invalid locking order [SCSI] aic79xx: use dma_get_required_mask() [SCSI] aic79xx: fix bracket mismatch in unused macro [SCSI] BusLogic: Replace 'boolean' by 'bool' [SCSI] advansys: clean up warnings [SCSI] 53c7xx: brackets fix in uncompiled code [SCSI] nsp_cs: remove old scsi code [SCSI] aic79xx: make ahd_match_scb() static [SCSI] DAC960: kmalloc->kzalloc/Casting cleanups [SCSI] scsi_kmap_atomic_sg(): check that local irqs are disabled [SCSI] Buslogic: local_irq_disable() is redundant after local_irq_save() [SCSI] aic94xx: update for v28 firmware [SCSI] scsi_error: Fix lost EH commands [SCSI] aic94xx: Add default bus reset handler [SCSI] aic94xx: Remove TMF result code munging [SCSI] libsas: Add an LU reset mechanism to the error handler [SCSI] libsas: Don't BUG when connecting two expanders via wide port [SCSI] st: fix Tape dies if wrong block size used, bug 7919 ...
2007-02-11[PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().Robert P. J. Day
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the corresponding "kmem_cache_zalloc()" call. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Roland McGrath <roland@redhat.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Acked-by: Joel Becker <Joel.Becker@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jan Kara <jack@ucw.cz> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10Merge branch 'linus'James Bottomley
Conflicts: drivers/scsi/ipr.c Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-09[PATCH] iscsi endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-03[SCSI] libsas: Add an LU reset mechanism to the error handlerDarrick J. Wong
After discussion with andmike and dougg, it seems that the purpose of eh_device_reset_handler is to issue LU resets, and that eh_bus_reset_handler would be a more appropriate place for a phy reset. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-02[SCSI] spi transport class: export spi_dv_pendingEric Moore
Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27[SCSI] libsas: Handle SCSI commands that complete with failure codesDarrick J. Wong
This patch moves the code that handles SAS failures out of the main EH function and into a separate function. It also detects commands that have no sas_task (i.e. they completed, but with error data) and sends them into scsi_error for processing. This allows us to handle SCSI errors (and enables auto-spinup as a side effect) instead of dropping them on the floor and falling into an infinite loop. It also requires the implementation of a device reset function, which the SAS failure code has been modified to employ for REQ_DEVICE_RESET. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27[SCSI] libsas: Clean up discovery failure handler codeDarrick J. Wong
sas_rphy_delete does two things: it removes the sas_rphy from the transport layer and frees the sas_rphy. This can be broken down into two functions, sas_rphy_remove and sas_rphy_free; sas_rphy_remove is of interest to sas_discover_root_expander because it calls functions that require sas_rphy_add as a prerequisite and can fail (namely sas_discover_expander). In that case, sas_discover_root_expander needs to be able to undo the effects of sas_rphy_add yet leave the job of freeing the sas_rphy to the caller of sas_discover_root_expander. This patch also removes some unnecessary code from sas_discover_end_dev to eliminate an unnecessary cycle of sas_notify_lldd_gone/found for SAS devices, thus eliminating a sas_rphy_remove call (and fixing a race condition where a SCSI target scan can come in between the gone and found call). It also moves the sas_rphy_free calls into sas_discover_domain and sas_ex_discover_end_dev to complement the sas_rphy_allocation via sas_get_port_device. This patch does not change the semantics of sas_rphy_delete. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Add SAS_HA state flags to avoid queueing events while unloadingDarrick J. Wong
Track sas_ha_struct state so that we ignore events that come in while we're shutting things down. Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Delay issuing ABORT TASK TMF until the error handlerDarrick J. Wong
sas_task_abort() should simply abort the upper-level SCSI command and wait until the error handler to send the actual ABORT TASK command. By deferring things to the EH we simplify the concurrency coordination and eliminate some race conditions. Note that sas_task_abort has a few hooks to handle libsas internal commands properly too. Also rename do_sas_task_abort to __sas_task_abort just in case we really want to abort the task *right now* and we don't have a scsi_cmnd attached to the command. This is a hook for libata internal commands to abort. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Enable the EH strategy handler to reset a phy after a commandDarrick J. Wong
When a SAS LLDD needs to request a device port reset, it needs to have all commands aborted before it can reset the port. Since commands are put on the EH's list in the order that they were queued, the LLDD can set a "need reset" flag in the last task to be aborted so that the EH can reset the port after all commands are aborted. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Remove SAS_TASK_INITIATOR_ABORTED flagDarrick J. Wong
This flag is no longer necessary because we push tasks to be aborted into the EH as soon as we possibly can, and let the SCSI EH code take care of the coordination for which this flag was used. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Add a sysfs knob to enable/disable a phyDarrick J. Wong
This patch lets a user arbitrarily enable or disable a phy via sysfs. Potential applications include shutting down a phy to replace one lane of wide port, and (more importantly) providing a method for the libata SATL to control the phy. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Don't give scsi_cmnds to the EH if they never made it to the ↵Darrick J. Wong
SAS LLDD or have already returned On a system with many SAS targets, it appears possible that a scsi_cmnd can time out without ever making it to the SAS LLDD or at the same time that a completion is occurring. In both of these cases, telling the LLDD to abort the sas_task makes no sense because the LLDD won't know about the sas_task; what we really want to do is to increase the timer. Note that this involves creating another sas_task bit to indicate whether or not the task has been sent to the LLDD; I could have implemented this by slightly redefining SAS_TASK_STATE_PENDING, but this way seems cleaner. This second version amends the aic94xx portion to set the TASK_AT_INITIATOR flag for all sas_tasks that were passed to lldd_execute_task. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-06Actually update the fixed up compile failures.David Howells
Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-06Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/pcmcia/ds.c Fix up merge failures with Linus's head and fix new compile failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (73 commits) [SCSI] aic79xx: Add ASC-29320LPE ids to driver [SCSI] stex: version update [SCSI] stex: change wait loop code [SCSI] stex: add new device type support [SCSI] stex: update device id info [SCSI] stex: adjust default queue length [SCSI] stex: add value check in hard reset routine [SCSI] stex: fix controller_info command handling [SCSI] stex: fix biosparam calculation [SCSI] megaraid: fix MMIO casts [SCSI] tgt: fix undefined flush_dcache_page() problem [SCSI] libsas: better error handling in sas_expander.c [SCSI] lpfc 8.1.11 : Change version number to 8.1.11 [SCSI] lpfc 8.1.11 : Misc Fixes [SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enable [SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem Id [SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) support [SCSI] lpfc 8.1.11 : Adjust LOG_FCP logging [SCSI] lpfc 8.1.11 : Fix Memory leaks [SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_support ...
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/ata/libata-scsi.c include/linux/libata.h Futher merge of Linus's head and compilation fixups. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05Merge branch 'master' of ↵David Howells
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-04[PATCH] severing module.h->sched.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-03[SCSI] scsi tgt: SCSI RDMA Protocol library functionsFUJITA Tomonori
libsrp provides helper functions for SRP target drivers. Some SRP target drivers would be out of drivers/scsi/ so we added an entry for libsrp in drivers/scsi/Kconfig. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-28[PATCH] add missing libsas include to fix s390 compilation.Dave Jones
include/scsi/libsas.h:479: error: field 'smp_req' has incomplete type include/scsi/libsas.h:480: error: field 'smp_resp' has incomplete type Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-25[SCSI] scsi tgt: scsi target user and kernel communication interfaceFUJITA Tomonori
The user-space daemon and tgt kernel module need bi-directional kernel/user high-performance interface, however, mainline provides no standard interface like that. This patch adds shared memory interface between kernel and user spaces like some other drivers do by using own character device. The user-space daemon and tgt kernel module creates shared memory via mmap and use it like ring buffer. poll (kernel to user) and write (user to kernel) system calls are used for notification. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-25[SCSI] scsi tgt: scsi target lib functionalityFUJITA Tomonori
The core scsi target lib functions. TODO: - mv md/dm-bio-list.h to linux/bio-list.h so md and us do not have to do that weird include. - convert scsi_tgt_cmd's work struct to James's execute code. And try to kill our scsi_tgt_cmd. - add host state checking. We do refcouting so hotplug is partially supported, but we need to add state checking to make it easier on the LLD. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-25[SCSI] export scsi-ml functions needed by tgt_scsi_lib and its LLDsFUJITA Tomonori
This patch contains the needed changes to the scsi-ml for the target mode support. Note, per the last review we moved almost all the fields we added to the scsi_cmnd to our internal data structure which we are going to try and kill off when we can replace it with support from other parts of the kernel. The one field we left on was the offset variable. This is needed to handle the case where the target gets request that is so large that it cannot execute it in one dma operation. So max_secotors or a segment limit may limit the size of the transfer. In this case our tgt core code will break up the command into managable transfers and send them to the LLD one at a time. The offset is then used to tell the LLD where in the command we are at. Is there another field on the scsi_cmd for that? Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22[SCSI] Make scsi_scan_host work for drivers which find their own targetsMatthew Wilcox
If a driver can find its own targets, it can now fill in scan_finished and (optionally) scan_start in the scsi_host_template. Then, when it calls scsi_scan_host(), it will be called back (from a thread if asynchronous discovery is enabled), first to start the scan, and then at intervals to check if the scan is completed. Also make scsi_prep_async_scan and scsi_finish_async_scan static. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22Merge ../scsi-rc-fixes-2.6James Bottomley
2006-11-22[PATCH] aic94xx: handle REQ_DEVICE_RESETDarrick J. Wong
This patch implements a REQ_DEVICE_RESET handler for the aic94xx driver. Like the earlier REQ_TASK_ABORT patch, this patch defers the device reset to the Scsi_Host's workqueue, which has the added benefit of ensuring that the device reset does not happen at the same time that the abort tmfs are being processed. After the phy reset, the busted drive should go away and be re-detected later, which is indeed what I've seen on both a x260 and a x206m. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-15[SCSI] kill scsi_assign_lockChristoph Hellwig
scsi_assign_lock has been unused for a long time and is a bad idea in general, so kill it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15[SCSI] libsas: add sas_abort_taskDarrick J. Wong
This patch adds an external function, sas_abort_task, to enable LLDDs to abort sas_tasks. It also adds a work_struct so that the actual work of aborting a task can be shifted from tasklet context (in the LLDD) onto the scsi_host's workqueue. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15[SCSI] libsas: modify error handler to use scsi_eh_* functionsDarrick J. Wong
This patch adds an EH done queue to sas_ha, converts the error handling strategy function and the sas_scsi_task_done functions in libsas to use the scsi_eh_* commands for error'd commands, and adds checks for the INITIATOR_ABORTED flag so that we do the right thing if a sas_task has been aborted by the initiator. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] replace u8 and u32 with __u8 and __u32 in scsi.h for user spaceFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] scsi_debug: support REPORT TARGET PORT GROUPSHannes Reinecke
This patch adds support for REPORT TARGET PORT GROUPS. This is used eg for the multipathing priority callout to determine the path priority. With this patch multipath-tools can use the existing mpath_prio_alua callout to exercise the path priority grouping. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] libiscsi: fix oops in connection create failure pathMike Christie
If connection creation fails we end up calling list_del on a invalid struct. This then causes an oops. We are not acutally using the lists (old MCS code we thought might be useful elsewhere) so this patch just removes that code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] iscsi class: fix slab corruption during restartMike Christie
The transport class recv mempools are causing slab corruption. We could hack around netlink's lack of mempool support like dm, but it is just too ulgy (dm's hack is ugly enough :) when you need to support broadcast. This patch removes the recv pools. We have not used them even when we were allocting 20 MB per session and the system only had 64 MBs. And we have no pools on the send side and have been ok there. When Peter's work gets merged we can use that since the network guys are in favor of that approach and are not going to add mempools everywhere. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-11[SCSI] Add ability to scan scsi busses asynchronouslyMatthew Wilcox
Since it often takes around 20-30 seconds to scan a scsi bus, it's highly advantageous to do this in parallel with other things. The bulk of this patch is ensuring that devices don't change numbering, and that all devices are discovered prior to trying to start init. For those who build SCSI as modules, there's a new scsi_wait_scan module that will ensure all bus scans are finished. This patch only handles drivers which call scsi_scan_host. Fibre Channel, SAS, SATA, USB and Firewire all need additional work. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits) [SCSI] Initial Commit of qla4xxx [SCSI] raid class: handle component-add errors [SCSI] SCSI megaraid_sas: handle thrown errors [SCSI] SCSI aic94xx: handle sysfs errors [SCSI] SCSI st: fix error handling in module init, sysfs [SCSI] SCSI sd: fix module init/exit error handling [SCSI] SCSI osst: add error handling to module init, sysfs [SCSI] scsi: remove hosts.h [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog [SCSI] megaraid_sas: adds tasklet for cmd completion [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error [SCSI] megaraid_sas: function pointer for disable interrupt [SCSI] megaraid_sas: frame count optimization [SCSI] megaraid_sas: FW transition and q size changes [SCSI] qla2xxx: Update version number to 8.01.07-k2. [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked. [SCSI] qla2xxx: Add MODULE_FIRMWARE tags. [SCSI] qla2xxx: Add support for host port state FC transport attribute. [SCSI] qla2xxx: Add support for fabric name FC transport attribute. ...
2006-10-04[PATCH] helper function for retrieving scsi_cmd given host based block layer tagDavid C Somayajulu
This was necessitated by the need for a function to get back to a scsi_cmnd, when an hba the posts its (corresponding) completion interrupt with a block layer tag as its reference. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-09-30[PATCH] scsi: device_reprobe() can failAndrew Morton
device_reprobe() should return an error code. When it does so, scsi_device_reprobe() should propagate it back. Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30[PATCH] BLOCK: Make it possible to disable the block layer [try #6]David Howells
Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30[PATCH] Split struct request ->flags into two partsJens Axboe
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-27[SCSI] scsi: device_reprobe() can failAndrew Morton
device_reprobe() should return an error code. When it does so, scsi_device_reprobe() should propagate it back. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-26[SCSI] sg: fixes for large page_sizeDouglas Gilbert
This sg driver patch addresses the problem with larger page sizes reported by Brian King in this post: http://marc.theaimsgroup.com/?l=linux-scsi&m=115867718623631&w=2 Some other related matters are also addressed. Some of these prevent oopses when the SG_SCATTER_SZ or scatter_elem_sz are set to inappropriate values. The scatter_elem_sz has been tested up to 4 MB which should make the largest data transfer with one SCSI command, 32 MB less one block, achievable with a relatively small number of elements in the scatter gather list. ChangeLog: - add scatter_elem_sz boot time parameter and sysfs module parameter that is initialized to SG_SCATTER_SZ - the driver will then adjust scatter_elem_sz to be the max(given(scatter_elem_sz), PAGE_SIZE) It will also round it up, if necessary, to be a power of two - clean up sg.h header, correct bad urls and some statements that are no longer valid - make the def_reserved_size sysfs module attribute writable Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-24[PATCH] SCSI gfp_t annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[SCSI] SPI transport class: misc DV fixesJames Bottomley
Key more of the domain validation settings off the inquiry data from the disk (in particular, don't try IU or DT unless the disk claims to support them. Also add a new dv_in_progress flag to prevent recursive DV. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23Merge mulgrave-w:git/scsi-misc-2.6James Bottomley
Conflicts: drivers/scsi/iscsi_tcp.c drivers/scsi/iscsi_tcp.h Pretty horrible merge between crypto hash consolidation and crypto_digest_...->crypto_hash_... conversion Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-19[HEADERS] One line per header in Kbuild files to reduce conflictsDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-07[SCSI] aci94xx: implement link rate settingJames Bottomley
This patch implements the ability to set the minimum and maximum linkrates for both libsas (for expanders) and aic94xx (for the host phys). It also tidies up the setting of the hardware min and max to make sure they're updated when the expander emits a change broadcast. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>