aboutsummaryrefslogtreecommitdiff
path: root/include/xen/events.h
AgeCommit message (Collapse)Author
2008-08-21xen: save previous spinlock when blockingJeremy Fitzhardinge
A spinlock can be interrupted while spinning, so make sure we preserve the previous lock of interest if we're taking a lock from within an interrupt handler. We also need to deal with the case where the blocking path gets interrupted between testing to see if the lock is free and actually blocking. If we get interrupted there and end up in the state where the lock is free but the irq isn't pending, then we'll block indefinitely in the hypervisor. This fix is to make sure that any nested lock-takers will always leave the irq pending if there's any chance the outer lock became free. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16xen: implement Xen-specific spinlocksJeremy Fitzhardinge
The standard ticket spinlocks are very expensive in a virtual environment, because their performance depends on Xen's scheduler giving vcpus time in the order that they're supposed to take the spinlock. This implements a Xen-specific spinlock, which should be much more efficient. The fast-path is essentially the old Linux-x86 locks, using a single lock byte. The locker decrements the byte; if the result is 0, then they have the lock. If the lock is negative, then locker must spin until the lock is positive again. When there's contention, the locker spin for 2^16[*] iterations waiting to get the lock. If it fails to get the lock in that time, it adds itself to the contention count in the lock and blocks on a per-cpu event channel. When unlocking the spinlock, the locker looks to see if there's anyone blocked waiting for the lock by checking for a non-zero waiter count. If there's a waiter, it traverses the per-cpu "lock_spinners" variable, which contains which lock each CPU is waiting on. It picks one CPU waiting on the lock and sends it an event to wake it up. This allows efficient fast-path spinlock operation, while allowing spinning vcpus to give up their processor time while waiting for a contended lock. [*] 2^16 iterations is threshold at which 98% locks have been taken according to Thomas Friebel's Xen Summit talk "Preventing Guests from Spinning Around". Therefore, we'd expect the lock and unlock slow paths will only be entered 2% of the time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <clameter@linux-foundation.org> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Virtualization <virtualization@lists.linux-foundation.org> Cc: Xen devel <xen-devel@lists.xensource.com> Cc: Thomas Friebel <thomas.friebel@amd.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-27xen: implement save/restoreJeremy Fitzhardinge
This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-27xen: add rebind_evtchn_irqJeremy Fitzhardinge
Add rebind_evtchn_irq(), which will rebind an device driver's existing irq to a new event channel on restore. Since the new event channel will be masked and bound to vcpu0, we update the state accordingly and unmask the irq once everything is set up. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: add resend_irq_on_evtchn() definition into events.cIsaku Yamahata
Define resend_irq_on_evtchn() which ia64/xen uses. Although it isn't used by current x86/xen code, it's arch generic so that put it into common code. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24Xen: make events.c portable for ia64/xen supportIsaku Yamahata
Remove x86 dependency in drivers/xen/events.c for ia64/xen support introducing include/asm/xen/events.h. Introduce xen_irqs_disabled() to hide regs->flags Introduce xen_do_IRQ() to hide regs->orig_ax. make enum ipi_vector definition arch specific. ia64/xen needs four vectors. Add one rmb() because on ia64 xchg() isn't barrier. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-07-18xen: use the hvc console infrastructure for Xen consoleJeremy Fitzhardinge
Implement a Xen back-end for hvc console. * * * Add early printk support via hvc console, enable using "earlyprintk=xen" on the kernel command line. From: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Olof Johansson <olof@lixom.net>
2007-07-18xen: SMP guest supportJeremy Fitzhardinge
This is a fairly straightforward Xen implementation of smp_ops. Xen has its own IPI mechanisms, and has no dependency on any APIC-based IPI. The smp_ops hooks and the flush_tlb_others pv_op allow a Xen guest to avoid all APIC code in arch/i386 (the only apic operation is a single apic_read for the apic version number). One subtle point which needs to be addressed is unpinning pagetables when another cpu may have a lazy tlb reference to the pagetable. Xen will not allow an in-use pagetable to be unpinned, so we must find any other cpus with a reference to the pagetable and get them to shoot down their references. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Andi Kleen <ak@suse.de>
2007-07-18xen: event channelsJeremy Fitzhardinge
Xen implements interrupts in terms of event channels. Each guest domain gets 1024 event channels which can be used for a variety of purposes, such as Xen timer events, inter-domain events, inter-processor events (IPI) or for real hardware IRQs. Within the kernel, we map the event channels to IRQs, and implement the whole interrupt handling using a Xen irq_chip. Rather than setting NR_IRQ to 1024 under PARAVIRT in order to accomodate Xen, we create a dynamic mapping between event channels and IRQs. Ideally, Linux will eventually move towards dynamically allocating per-irq structures, and we can use a 1:1 mapping between event channels and irqs. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Eric W. Biederman <ebiederm@xmission.com>