aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2009-09-19tty: USB does not need the filp argument in the driversAlan Cox
And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19vt: add an activate and lockAlan Cox
X and other graphical interfaces need to be able to flip to a console and lock it into graphics mode without races. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19vt: move kernel stuff out of vt.hAlan Cox
We have vt_kern.h for this Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19vt: remove power stuff from kernel/powerAlan Cox
In the past someone gratuitiously borrowed chunks of kernel internal vt code and dumped them in kernel/power. They have all sorts of deep relations with the vt code so put them in the vt tree instead Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19vt: add an event interfaceAlan Cox
This is needed and requested in various forms for ConsoleKit, screenblank handling and the like so do the job with a single interface. Also build the interface so that unlike VT_WAITACTIVE and friends it won't miss events. FIXME: Should this be a waitactive ioctl or a new device file you can poll and read events from. We need the code anyway to fix up the existing broken wait for console switch logic but the ConsoleKit people would prefer the new device to the ioctl we have here Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19tty: Add a full port_close functionAlan Cox
Now we are extracting out methods for shutdown and the like we can add a proper tty_port_close method that knows all the innards of the tty closing process and hides the lot from the caller. At some point in the future this will be paired with a similar open() helper and the drivers can stick to hardware management. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19serial: 8250: add IRQ trigger supportVikram Pandita
There is currently no provision for passing IRQ trigger flags for serial IRQs with triggering requirements (such as GPIO IRQs) This patch adds irqflags to plat_serial8250_port that can be passed from board file to reqest_irq() of 8250 driver Changes are backward compatible with boards passing UPF_SHARE_IRQ flag Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq [Moved new flag to end to fix bugs in the original with the old_serial array -- Alan] Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19kfifo: Use "const" definitionsAlan Cox
Currently kfifo cannot be used by parts of the kernel that use "const" properly as kfifo itself does not use const for passed data blocks which are indeed const. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19cyclades: introduce cyy_readb/writebJiri Slaby
Add helpers for io operations, so that we can eliminate huge amount of supporting code. It is now centralized in those helpers and used values are precomputed in the init phase. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19cyclades: avoid addresses recomputationJiri Slaby
Don't fetch firmware address and recompute channel control on each port access. Precompute the values on init and use them later all the time. The same for board control. This simplify code and improves readability. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19Driver-Core: extend devnode callbacks to provide permissionsKay Sievers
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19Merge branch 'tracing/core-v3' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/urgent
2009-09-19tracing, perf: Convert the power tracer into an event tracerArjan van de Ven
This patch converts the existing power tracer into an event tracer, so that power events (C states and frequency changes) can be tracked via "perf". This also removes the perl script that was used to demo the tracer; its functionality is being replaced entirely with timechart. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130542.6d314860@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf: Add a timestamp to fork eventsArjan van de Ven
perf timechart needs to know when a process forked, in order to be able to visualize properly when tasks start. This patch adds a time field to the event structure, and fills it in appropriately. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130341.51ad2de2@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19Merge branch 'linus' into perfcounters/coreIngo Molnar
Merge reason: Bring in tracing changes we depend on. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19rcu: Fix whitespace inconsistenciesPaul E. McKenney
Fix a number of whitespace ^Ierrors in the include/linux/rcu* and the kernel/rcu* files. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu LKML-Reference: <20090918172819.GA24405@linux.vnet.ibm.com> [ did more checkpatch fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19V4L/DVB (13019): video: initial support for ADV7180Richard Röjfors
This is an initial driver for Analog Devices ADV7180 Video Decoder. So far it only supports query standard. [akpm@linux-foundation.org: remove unneeded cast] Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12997): Add the DTV_ISDB_TS_ID property for ISDB_SHIRANO Takahito
In ISDB-S, time-devision duplex is used to multiplexing several waves in the same frequency. Each wave is identified by its own transport stream ID, or TS ID. We need to provide some way to specify this ID from user applications to handle ISDB-S frontends. This code has been tested with the Earthsoft PT1 driver. [mchehab@infradead.org: Fix merge conflicts with isdbt and rename the new parameter to DTV_ISDBS_TS_ID] Signed-off-by: HIRANO Takahito <hiranotaka@zng.info> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12725): v4l: warn when desired devnodenr is in use & add _no_warn ↵Hans Verkuil
function Warn when the desired device node number is already in use, except when the new video_register_device_no_warn function is called since in some use-cases that warning is not relevant. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12541): v4l: remove video_register_device_indexHans Verkuil
video_register_device_index is never actually called, instead the stream index number is always calculated automatically. This patch removes this function and simplifies the internal get_index function since that can now always just return the first free index. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friendsHans Verkuil
Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12536): soc-camera: remove .gain and .exposure struct ↵Guennadi Liakhovetski
soc_camera_device members This makes the soc-camera interface for V4L2 subdevices thinner yet. Handle gain and exposure internally in each driver just like all other controls. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12535): soc-camera: remove .init() and .release() methods from ↵Guennadi Liakhovetski
struct soc_camera_ops Remove unneeded soc-camera operations, this also makes the soc-camera API to v4l2 subdevices thinner. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12534): soc-camera: V4L2 API compliant scaling (S_FMT) and cropping ↵Guennadi Liakhovetski
(S_CROP) The initial soc-camera scaling and cropping implementation turned out to be incompliant with the V4L2 API, e.g., it expected the user to specify cropping in output window pixels, instead of input window pixels. This patch converts the soc-camera core and all drivers to comply with the standard. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12530): soc-camera: switch to using v4l2_subdev_call()Guennadi Liakhovetski
Use v4l2_subdev_call() instead of v4l2_device_call_until_err() in all host drivers and in soc-camera core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12529): soc-camera: switch to s_crop v4l2-subdev video operationGuennadi Liakhovetski
Remove set_crop soc-camera device method and switch to s_crop from v4l2-subdev video operations. Also extend non-i2c drivers to also hold a pointer to their v4l2-subdev instance in control device driver-data, i.e., in dev_get_drvdata((struct device *)to_soc_camera_control(icd)) Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12521): soc-camera: use .s_std() from struct v4l2_subdev_core_opsGuennadi Liakhovetski
Remove .set_std() method from struct soc_camera_ops, use .s_std() from struct v4l2_subdev_core_ops instead. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12519): soc-camera: put pixel format initialisation back in probe, ↵Guennadi Liakhovetski
add .put_formats() The move of format translation initialisation into soc_camera_open() was temporary for the soc-camera as platform driver intermediate step, put it back into soc_camera_probe(). Also add a .put_formats() method to soc_camera_host_ops to free any resources host driver might have allocated in .get_formats(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12515): soc-camera: use struct v4l2_rect in struct soc_camera_deviceGuennadi Liakhovetski
Switch to using struct v4l2_rect in struct soc_camera_device for uniformity and simplicity. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12513): soc-camera: add support for camera-host controlsGuennadi Liakhovetski
Until now soc-camera only supported client (sensor) controls. This patch enables camera-host drivers to implement their own controls too. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12511): V4L2: add a new V4L2_CID_BAND_STOP_FILTER integer controlGuennadi Liakhovetski
Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches the band-stop filter off, or sets it to a certain strength. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12510): soc-camera: (partially) convert to v4l2-(sub)dev APIGuennadi Liakhovetski
Convert the soc-camera framework to use the v4l2-(sub)dev API. Start using v4l2-subdev operations. Only a part of the interface between the soc_camera core, soc_camera host drivers on one side and soc_camera device drivers on the other side is replaced so far. The rest of the interface will be replaced in incremental steps, and will require extensions and, possibly, modifications to the v4l2-subdev code. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12508): soc-camera: remove unused .iface from struct ↵Guennadi Liakhovetski
soc_camera_platform_info Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12506): soc-camera: convert to platform deviceGuennadi Liakhovetski
Convert soc-camera core and all drivers to platform device API. We already converted platforms to register a platform device for each soc-camera client, now we remove the compatibility code and switch completely to the new scheme. This is a preparatory step for the v4l2-subdev conversion. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12505): soc_camera_platform: pass device pointer from soc-camera ↵Guennadi Liakhovetski
core on .add_device() Add a struct device pointer to struct soc_camera_platform_info and let the user (ap325rxa) pass it down to soc_camera_platform.c in its .add_device() method. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12504): soc-camera: prepare soc_camera_platform.c and its users for ↵Guennadi Liakhovetski
conversion soc_camera_platform.c is only used by y SuperH ap325rxa board. This patch converts soc_camera_platform.c and its users for the soc-camera platform- device conversion and also extends soc-camera core to handle non-I2C cameras. Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12253): v4l: common vpss module for video driversMuralidharan Karicheri
This is a new module added for vpss library functions that are used for configuring vpss system module. All video drivers will include vpss.h header file and call functions defined in this module to configure vpss system module. Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12252): v4l: ccdc types used across ccdc modules for vpfe capture ↵Muralidharan Karicheri
driver common types used across CCDC modules Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driverMuralidharan Karicheri
This is the hw module for DM644x CCDC. This registers with the vpfe capture driver and provides a set of hw_ops to configure CCDC for a specific decoder device connected to the VPFE. Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12250): v4l: dm355 ccdc module for vpfe capture driverMuralidharan Karicheri
Adds ccdc hw module for DM355 CCDC. This registers with the bridge driver a set of hw_ops for configuring the CCDC for a specific decoder device connected to vpfe. Reviewed by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12248): v4l: vpfe capture bridge driver for DM355 and DM6446Muralidharan Karicheri
This the vpfe capture bridge driver for doing video capture on DM355 and DM6446 evms. The ccdc hw modules register with the driver and are used for configuring the CCD Controller for a specific decoder interface. The driver also registers the sub devices required for a specific evm. More than one sub devices can be registered. This allows driver to switch dynamically to capture video from any sub device that is registered. Currently only one sub device (tvp5146) is supported. But in future this driver is expected to do capture from sensor devices such as Micron's MT9T001, MT9T031 and MT9P031 etc. The driver currently supports MMAP based IO. Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be> Reviewed by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12246): tvp514x: Migration to sub-device frameworkMuralidharan Karicheri
This patch converts TVP514x driver to sub-device framework from V4L2-int framework. [hverkuil@xs4all.nl: remove inline from the dump_reg function] Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Hardik Shah <hardik.shah@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12974): SAA7164: Remove the SAA7164 bus id, no longer required.Steven Toth
SAA7164: Remove the SAA7164 bus id, no longer required. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12964): tuner-core: add support for NXP TDA18271 without TDA829X demodMichael Krufky
Add support for NXP TDA18271 as a standalone tuner, allowing the use of analog demodulators other than the Philips/NXP TDA829x. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12950): tuner-simple: add Philips CU1216LAntti Palosaari
add Philips CU1216L NIM Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12922): Add the SAA7164 I2C bus identifierSteven Toth
Add the SAA7164 I2C bus identifier Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12892): DVB-API: add support for ISDB-T and ISDB-Tsb (version 5.1)Patrick Boettcher
This patch increments the DVB-API to version 5.1 in order to reflect the addition of ISDB-T and ISDB-Tsb on Linux' DVB-API. Changes in detail: - added a small document to describe how to use the API to tune to an ISDB-T or ISDB-Tsb channel - added necessary fields to dtv_frontend_cache - added a smarter clear-cache function which resets all fields of the dtv_frontend_cache - added a TRANSMISSION_MODE_4K to fe_transmit_mode_t Signed-off-by: Olivier Grenie <olgrenie@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-18tracing: Remove markersChristoph Hellwig
Now that the last users of markers have migrated to the event tracer we can kill off the (now orphan) support code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090917173527.GA1699@lst.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18x86, perf_counter, bts: Optimize BTS overflow handlingMarkus Metzger
Draining the BTS buffer on a buffer overflow interrupt takes too long resulting in a kernel lockup when tracing the kernel. Restructure perf_counter sampling into sample creation and sample output. Prepare a single reference sample for BTS sampling and update the from and to address fields when draining the BTS buffer. Drain the entire BTS buffer between a single perf_output_begin() / perf_output_end() pair. Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090915130023.A16204@sedona.ch.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (64 commits) ext4: Update documentation about quota mount options ext4: replace MAX_DEFRAG_SIZE with EXT_MAX_BLOCK ext4: Fix the alloc on close after a truncate hueristic ext4: Add a tracepoint for ext4_alloc_da_blocks() ext4: store EXT4_EXT_MIGRATE in i_state instead of i_flags ext4: limit block allocations for indirect-block files to < 2^32 ext4: Fix different block exchange issue in EXT4_IOC_MOVE_EXT ext4: Add null extent check to ext_get_path ext4: Replace BUG_ON() with ext4_error() in move_extents.c ext4: Replace get_ext_path macro with an inline funciton ext4: Fix include/trace/events/ext4.h to work with Systemtap ext4: Fix initalization of s_flex_groups ext4: Always set dx_node's fake_dirent explicitly. ext4: Fix async commit mode to be safe by using a barrier ext4: Don't update superblock write time when filesystem is read-only ext4: Clarify the locking details in mballoc ext4: check for need init flag in ext4_mb_load_buddy ext4: move ext4_mb_init_group() function earlier in the mballoc.c ext4: Make non-journal fsync work properly ext4: Assure that metadata blocks are written during fsync in no journal mode ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-04 15:19:55 +0000