aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2009-06-11serial: add support for the TI AR7 internal UARTFlorian Fainelli
This patch adds support for the TI AR7 internal UART. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: rewrite the ldisc lockingAlan Cox
There are several pretty much unfixable races in the old ldisc code, especially with respect to pty behaviour and also to hangup. It's easier to rewrite the code than simply try and patch it up. This patch - splits the ldisc from the tty (so we will be able to refcount it more cleanly later) - introduces a mutex lock for ldisc changing on an active device - fixes the complete mess that hangup caused - implements hopefully correct setldisc/close/hangup locking There are still some problems around pty pairs that have always been there but at least it is now possible to understand the code and fix further problems. This fixes the following known bugs - hang up can leak ldisc references - hang up may not call open/close on ldisc in a matched way - pty/tty pairs can deadlock during an ldisc change - reading the ldisc proc files can cause every ldisc to be loaded and probably a few other of the mysterious ldisc race reports. I'm sure it also adds the odd new one. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Extract various bits of ldisc codeAlan Cox
Before trying to tackle the ldisc bugs the code needs to be a good deal more readable, so do the simple extractions of routines first. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: throttling race fixAlan Cox
The tty throttling code can race due to the lock drops. It takes very high loads but this has been observed and verified by Rob Duncan. The basic problem is that on an SMP box we can go CPU #1 CPU #2 need to throttle ? suppose we should buffer space cleared are we throttled yes ? - unthrottle call throttle method This changeet take the termios lock to protect against this. The termios lock isn't the initial obvious candidate but many implementations of throttle methods already need to poke around their own termios structures (and nobody really locks them against a racing change of flow control). This does mean that anyone who is setting tty->low_latency = 1 and then calling tty_flip_buffer_push from their unthrottle method is going to end up collapsing in a pile of locks. However we've removed all the known bogus users of low_latency = 1 and such use isn't safe anyway for other reasons so catching it would be an improvement. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-118250_pci: add the OXCB950 chip to the 8250 PCI driver.Andre Przywara
This adds support for the following serial controller chip: Oxford Semiconductor OXCB950 for PCI Cardbus interface http://www.transdimension.com/products/serial/OXCB950.html on this card: ExSys EX-1370 1 port high-speed serial card for ExpressCard/34 slot Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11serial: refactor ASYNC_ flagsJiri Slaby
Define ASYNCB_* flags which are bit numbers of the ASYNC_* flags. This is useful for {test,set,clear}_bit. Also convert each ASYNC_% to be (1 << ASYNCB_%) and define masks with the macros, not constants. Tested with: #include "PATH_TO_KERNEL/include/linux/serial.h" static struct { unsigned int new, old; } as[] = { { ASYNC_HUP_NOTIFY, 0x0001 }, { ASYNC_FOURPORT, 0x0002 }, ... { ASYNC_BOOT_ONLYMCA, 0x00400000 }, { ASYNC_INTERNAL_FLAGS, 0xFFC00000 } }; ... for (a = 0; a < ARRAY_SIZE(as); a++) if (as[a].old != as[a].new) printf("%.8x != %.8x\n", as[a].old, as[a].new); Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: cyclades, remove typedefsJiri Slaby
They are unused anyway. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: cyclades, cache HW versionJiri Slaby
Store HW version locally to not read it all the time in interrupts and alike. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: cyclades, plx9060 casts cleanupJiri Slaby
Remove ugly all-over-the-code casts of ctl_addr to 9060 space. Add an union to the cyclades_card structure, which contains a pointer to both 9050 and 9060 spaces. The 9050 space layout is unknown, so let it still as a void __iomem pointer. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Bring the usb tty port structure into more useAlan Cox
This allows us to clean stuff up, but is probably also going to cause some app breakage with buggy apps as we now implement proper POSIX behaviour for USB ports matching all the other ports. This does also mean other apps that break on USB will now work properly. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Implement a drain delay in the tty portAlan Cox
We need this for devices that cannot flush and wait, but which do not order data and modem events. Without it we will hang up before all the data clears the hardware. Needed for the USB changes. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11tty: Add carrier processing on close to the tty_port coreAlan Cox
Some drivers implement this internally, others miss it out. Push the behaviour into the core code as that way everyone will do it consistently. Update the dtr rts method to raise or lower depending upon flags. Having a single method in this style fits most of the implementations more cleanly than two funtions. We need this in place before we tackle the USB side Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-09cpumask: introduce zalloc_cpumask_varYinghai Lu
So can get cpumask_var with cpumask_clear Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5543/1: arm: serial amba: add missing declaration in serial.h [ARM] pxa: fix pxa27x_udc default pullup GPIO [ARM] pxa/imote2: fix UCAM sensor board ADC model number mx[23]: don't put clock lookups in __initdata fix oops when using console=ttymxcN with N > 0 [ARM] ARMv7 errata: only apply fixes when running on applicable CPU [ARM] 5534/1: kmalloc must return a cache line aligned buffer
2009-06-07[ARM] 5543/1: arm: serial amba: add missing declaration in serial.hAlessandro Rubini
This header is sometimes included in the uncompress stage to get register values, but no <linux/amba/bus.h> can be included there. So declare "struct amba_device" here before using it in a prototype. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-04ptrace: tracehook_report_clone: fix false positivesOleg Nesterov
The "trace || CLONE_PTRACE" check in tracehook_report_clone() is not right, - If the untraced task does clone(CLONE_PTRACE) the new child is not traced, we must not queue SIGSTOP. - If we forked the traced task, but the tracer exits and untraces both the forking task and the new child (after copy_process() drops tasklist_lock), we should not queue SIGSTOP too. Change the code to check task_ptrace() != 0 instead. This is still racy, but the race is harmless. We can race with another tracer attaching to this child, or the tracer can exit and detach in parallel. But giwen that we didn't do wake_up_new_task() yet, the child must have the pending SIGSTOP anyway. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04drm: Hook up DPMS property handling in drm_crtc.c. Add ↵Keith Packard
drm_helper_connector_dpms. Making the drm_crtc.c code recognize the DPMS property and invoke the connector->dpms function doesn't remove any capability from the driver while reducing code duplication. That just highlighted the problem with the existing DPMS functions which could turn off the connector, but failed to turn off any relevant crtcs. The new drm_helper_connector_dpms function manages all of that, using the drm_helper-specific crtc and encoder dpms functions, automatically computing the appropriate DPMS level for each object in the system. This fixes the current troubles in the i915 driver which left PLLs, pipes and planes running while in DPMS_OFF mode or even while they were unused. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-02parport: quickfix the proc registration bugAlan Cox
Ideally we should have a directory of drivers and a link to the 'active' driver. For now just show the first device which is effectively the existing semantics without a warning. This is an update on the original buggy patch that I then forgot to resubmit. Confusingly it was proposed by Red Hat, written by Etched Pixels fixed and submitted by Intel ... Resolves-Bug: http://bugzilla.kernel.org/show_bug.cgi?id=9749 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: 3c509: Add missing EISA IDs MAINTAINERS: take maintainership of the cpmac Ethernet driver net/firmare: Ignore .cis files ath1e: add new device id for asus hardware mlx4_en: Fix a kernel panic when waking tx queue rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan mac8390: fix build with NET_POLL_CONTROLLER cxgb3: link fault fixes cxgb3: fix dma mapping regression netfilter: nfnetlink_log: fix wrong skbuff size calculation netfilter: xt_hashlimit does a wrong SEQ_SKIP bfin_mac: fix build error due to net_device_ops convert atlx: move modinfo data from atlx.h to atl1.c gianfar: fix babbling rx error event bug cls_cgroup: read classid atomically in classifier netfilter: nf_ct_dccp: add missing DCCP protocol changes in event cache netfilter: nf_ct_tcp: fix accepting invalid RST segments
2009-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/headers-check-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/headers-check-2.6: headers_check fix: linux/net_dropmon.h headers_check fix: linux/auto_fs.h
2009-06-01headers_check fix: linux/net_dropmon.hJaswinder Singh Rajput
fix the following 'make headers_check' warnings: usr/include/linux/net_dropmon.h:7: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-06-01headers_check fix: linux/auto_fs.hJaswinder Singh Rajput
fix the following 'make headers_check' warnings: usr/include/linux/auto_fs.h:17: include of <linux/types.h> is preferred over <asm/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-05-29Merge branches 'bugzilla-13121+', 'bugzilla-13233', ↵Len Brown
'redhat-bugzilla-500311', 'pci-bind-oops', 'misc-2.6.30' and 'i7300_idle' into release
2009-05-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - better handle bad scheduler decisions Input: usb1400_ts - fix access to "device data" in resume function Input: multitouch - augment event semantics documentation Input: multitouch - add tracking ID to the protocol
2009-05-29memcg: fix deadlock between lock_page_cgroup and mapping tree_lockDaisuke Nishimura
mapping->tree_lock can be acquired from interrupt context. Then, following dead lock can occur. Assume "A" as a page. CPU0: lock_page_cgroup(A) interrupted -> take mapping->tree_lock. CPU1: take mapping->tree_lock -> lock_page_cgroup(A) This patch tries to fix above deadlock by moving memcg's hook to out of mapping->tree_lock. charge/uncharge of pagecache/swapcache is protected by page lock, not tree_lock. After this patch, lock_page_cgroup() is not called under mapping->tree_lock. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29cred: #include init.h in cred.hAlexey Dobriyan
linux/cred.h can't be included as first header (alphabetical order) because it uses __init which is enough to break compilation on some archs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-28i7300_idle: allow testing on i5000-series hardware w/o re-compileLen Brown
Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Andrew Henroid <andrew.d.henroid@intel.com>
2009-05-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2009-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add support for VGA load detection (pre-945). drm/i915: Use an I2C algo to do the flip to SDVO DDC bus. drm/i915: Determine type before initialising connector drm/i915: Return SDVO LVDS VBT mode if no EDID modes are detected. drm/i915: Fetch SDVO LVDS mode lines from VBT, then reserve them i915: support 8xx desktop cursors drm/i915: allocate large pointer arrays with vmalloc
2009-05-25netfilter: nf_ct_tcp: fix accepting invalid RST segmentsJozsef Kadlecsik
Robert L Mathews discovered that some clients send evil TCP RST segments, which are accepted by netfilter conntrack but discarded by the destination. Thus the conntrack entry is destroyed but the destination retransmits data until timeout. The same technique, i.e. sending properly crafted RST segments, can easily be used to bypass connlimit/connbytes based restrictions (the sample script written by Robert can be found in the netfilter mailing list archives). The patch below adds a new flag and new field to struct ip_ct_tcp_state so that checking RST segments can be made more strict and thus TCP conntrack can catch the invalid ones: the RST segment is accepted only if its sequence number higher than or equal to the highest ack we seen from the other direction. (The last_ack field cannot be reused because it is used to catch resent packets.) Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt2sas: fix driver version inconsistency [SCSI] 3w-xxxx: scsi_dma_unmap fix [SCSI] 3w-9xxx: scsi_dma_unmap fix [SCSI] ses: fix problems caused by empty SES provided name [SCSI] fc-transport: Close state transition-window during rport deletion. [SCSI] initialize max_target_blocked in scsi_alloc_target [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA
2009-05-23Input: multitouch - add tracking ID to the protocolHenrik Rydberg
There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: via82cxxx: Add VIA VX855 PCI Device ID ide: report timeouts in ide_busy_sleep() ide: improve failed opcode reporting ide: fix printk() levels in ide_dump_ata[pi]_error() ide: fix OOPS during ide-cd error recovery ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)
2009-05-22via82cxxx: Add VIA VX855 PCI Device IDHarald Welte
This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Bruce Chang <BruceChang@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: report timeouts in ide_busy_sleep()Bartlomiej Zolnierkiewicz
* change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void * [ARM] 5517/1: integrator: don't put clock lookups in __initdata [ARM] 5518/1: versatile: don't put clock lookups in __initdata [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF [ARM] Double check memmap is actually valid with a memmap has unexpected holes V2 [ARM] realview: fix broadcast tick support [ARM] realview: remove useless smp_cross_call_done() [ARM] smp: fix cpumask usage in ARM SMP code [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error [ARM] 5509/1: ep93xx: clkdev enable UARTS ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2 ARM: OMAP3: Fix HW SAVEANDRESTORE shift define ARM: OMAP3: Fix number of GPIO lines for 34xx [ARM] S3C: Do not set clk->owner field if unset [ARM] S3C2410: mach-bast.c registering i2c data too early [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c [ARM] S3C64XX: fix GPIO debug [ARM] S3C64XX: GPIO include cleanup [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning [ARM] nwfpe: Add decleration for ExtendedCPDO ...
2009-05-20[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *Alessandro Rubini
The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-19drm/i915: allocate large pointer arrays with vmallocJesse Barnes
For awhile now, many of the GEM code paths have allocated page or object arrays with the slab allocator. This is nice and fast, but won't work well if memory is fragmented, since the slab allocator works with physically contiguous memory (i.e. order > 2 allocations are likely to fail fairly early after booting and doing some work). This patch works around the issue by falling back to vmalloc for >PAGE_SIZE allocations. This is ugly, but much less work than chaining a bunch of pages together by hand (suprisingly there's not a bunch of generic kernel helpers for this yet afaik). vmalloc space is somewhat precious on 32 bit kernels, but our allocations shouldn't be big enough to cause problems, though they're routinely more than a page. Note that this patch doesn't address the unchecked alloc-based-on-ioctl-args in GEM; that needs to be fixed in a separate patch. Also, I've deliberately ignored the DRM's "area" junk. I don't think anyone actually uses it anymore and I'm hoping it gets ripped out soon. [Updated: removed size arg to new free function. We could unify the free functions as well once the DRM mem tracking is ripped out.] fd.o bug #20152 (part 1/3) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-18asm-generic: fix local_add_unless macroRoel Kluin
`local_add_unless(x, y, z)' will be expanded to `(&(x)->y, (y), (x))', but `&(x)->y' should be `&(x)->a' Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-18[ARM] Double check memmap is actually valid with a memmap has unexpected ↵Mel Gorman
holes V2 pfn_valid() is meant to be able to tell if a given PFN has valid memmap associated with it or not. In FLATMEM, it is expected that holes always have valid memmap as long as there is valid PFNs either side of the hole. In SPARSEMEM, it is assumed that a valid section has a memmap for the entire section. However, ARM and maybe other embedded architectures in the future free memmap backing holes to save memory on the assumption the memmap is never used. The page_zone linkages are then broken even though pfn_valid() returns true. A walker of the full memmap must then do this additional check to ensure the memmap they are looking at is sane by making sure the zone and PFN linkages are still valid. This is expensive, but walkers of the full memmap are extremely rare. This was caught before for FLATMEM and hacked around but it hits again for SPARSEMEM because the page_zone linkages can look ok where the PFN linkages are totally screwed. This looks like a hatchet job but the reality is that any clean solution would end up consumning all the memory saved by punching these unexpected holes in the memmap. For example, we tried marking the memmap within the section invalid but the section size exceeds the size of the hole in most cases so pfn_valid() starts returning false where valid memmap exists. Shrinking the size of the section would increase memory consumption offsetting the gains. This patch identifies when an architecture is punching unexpected holes in the memmap that the memory model cannot automatically detect and sets ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx which is the model sub-architecture this has been reported on but may expand later. When set, walkers of the full memmap must call memmap_valid_within() for each PFN and passing in what it expects the page and zone to be for that PFN. If it finds the linkages to be broken, it assumes the memmap is invalid for that PFN. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17reiserfs: fixup perms when xattrs are disabledJeff Mahoney
This adds CONFIG_REISERFS_FS_XATTR protection from reiserfs_permission. This is needed to avoid warnings during file deletions and chowns with xattrs disabled. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-15Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. drm/i915: Set HDMI hot plug interrupt enable for only the output in question. drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS. drm/i915: Use the GM45 VGA hotplug workaround on G45 as well. drm/i915: ignore LVDS on intel graphics systems that lie about having it drm/i915: sanity check IER at wait_request time drm/i915: workaround IGD i2c bus issue in kernel side (v2) drm/i915: Don't allow binding objects into the last page of the aperture. drm/i915: save/restore fence registers across suspend/resume drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
2009-05-15libata: Media rotation rate and form factor heuristicsMartin K. Petersen
This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15[SCSI] fc-transport: Close state transition-window during rport deletion.Andrew Vasquez
Andrew Vasquez wrote: > fc-transport: Close state transition-window during rport deletion. > > After an rport's state has transitioned to FC_PORTSTATE_BLOCKED, > but, prior to making the upcall to 'block' the scsi-target > associated with an rport, queued commands can recycle and > ultimately run out of retries causing failures to propagate to > upper-level drivers. Close this transition-window by returning > the non-'retries' modifying DID_IMM_RETRY status for submitted > I/Os. The same can happen for iscsi when transitioning from logged in to failed and blocking the sdevs. This patch converts iscsi and fc's transitions back to use DID_IMM_RETRY instead of DID_TRANSPORT_DISRUPTED which has a limited number of retries that we do not want to use for handling this race. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> [Addition of iscsi and fc port online devloss case conversion by Mike Christie] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-15Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "mm: add /proc controls for pdflush threads" viocd: needs to depend on BLOCK block: fix the bio_vec array index out-of-bounds test
2009-05-15Revert "mm: add /proc controls for pdflush threads"Jens Axboe
This reverts commit fafd688e4c0c34da0f3de909881117d374e4c7af. Work is progressing to switch away from pdflush as the process backing for flushing out dirty data. So it seems pointless to add more knobs to control pdflush threads. The original author of the patch did not have any specific use cases for adding the knobs, so we can easily revert this before 2.6.30 to avoid having to maintain this API forever. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-14drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.Carl Worth
This allows userlevel code to discover the pipe number corresponding to a given CRTC ID. This is necessary for doing pipe-specific operations such as waiting for vblank on a given CRTC. Failure to use the right pipe mapping can result in GPU hangs, or at least failure to actually sync to vblank. Signed-off-by: Carl Worth <cworth@cworth.org> [anholt: Style touchups from review] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-12Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dma: fix ipu_idmac.c to not discard the last queued buffer ioatdma: fix "ioatdma frees DMA memory with wrong function" ipu_idmac: Use disable_irq_nosync() from within irq handlers. dmatest: fix max channels handling
2009-05-12ioatdma: fix "ioatdma frees DMA memory with wrong function"Maciej Sosnowski
as reported by Alexander Beregalov <a.beregalov@gmail.com> ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000007f76f800] [size=2000 bytes] [map ped as single] [unmapped as page] The ioatdma driver was unmapping all regions (either allocated as page or single) using unmap_page. This patch lets dma driver recognize if unmap_single or unmap_page should be used. It introduces two new dma control flags: DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE. They should be set to indicate dma driver to do dma-unmapping as single (first one for the source, tha latter for the destination). If respective flag is not set, the driver assumes dma-unmapping as page. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-12syscalls.h add the missing sys_pipe2 declarationArnd Bergmann
In order to build the generic syscall table, we need a declaration for every system call. sys_pipe2 was added without a proper declaration, so add this to syscalls.h now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>