aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2007-04-24[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQSMichael Ellerman
Rename MPIC_BROKEN_U3 to something a little more descriptive. Its effect is to enable support for HT irqs behind the PCI-X/HT bridge on U3/U4 (aka. CPC9x5) parts. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controllerDavid Gibson
This patch adds a driver to arch/powerpc/sysdev for the UIC, the on-chip interrupt controller from IBM/AMCC 4xx chips. It uses the new irq host mapping infrastructure. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] kprobes: Eliminate sstep exception if instruction can be emulatedAnanth N Mavinakayanahalli
For cases when probes are placed on instructions that can be emulated, don't take the single-step exception. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: PA6T oprofile supportOlof Johansson
Oprofile support for PA6T, kernel side. Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Fix PowerPC 750CL and 750GX CPU featuresJosh Boyer
PowerPC 750CL has high BATs. The patch below adds a CPU_FTRS_750CL that includes that. Without it, the original firmware mappings in the high BATs aren't cleared which continue to override the linux translations. It also adds CPU_FTR_COMMON to CPU_FTRS_750GX for completeness. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24Merge branch 'for-2.6.22' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.22
2007-04-23[POWERPC] add of_iomap functionChristian Krafft
The of_iomap function maps memory for a given device_node and returns a pointer to that memory. This is used at some places, so it makes sense to a seperate function. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] cell: add cbe_node_to_cpu functionChristian Krafft
This patch adds code to deal with conversion of logical cpu to cbe nodes. It removes code that assummed there were two logical CPUs per CBE. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: make spu page faults not block schedulingArnd Bergmann
Until now, we have always entered the spu page fault handler with a mutex for the spu context held. This has multiple bad side-effects: - it becomes impossible to suspend the context during page faults - if an spu program attempts to access its own mmio areas through DMA, we get an immediate livelock when the nopage function tries to acquire the same mutex This patch makes the page fault logic operate on a struct spu_context instead of a struct spu, and moves it from spu_base.c to a new file fault.c inside of spufs. We now also need to copy the dar and dsisr contents of the last fault into the saved context to have it accessible in case we schedule out the context before activating the page fault handler. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-13[POWERPC] DEBUG_PAGEALLOC for 32-bitBenjamin Herrenschmidt
Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT mapping and is only tested with Hash table based processor though it shouldn't be too hard to adapt it to others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 9 ++++++ arch/powerpc/mm/init_32.c | 4 +++ arch/powerpc/mm/pgtable_32.c | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/mm/ppc_mmu_32.c | 4 ++- include/asm-powerpc/cacheflush.h | 6 ++++ 5 files changed, 74 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Make tlb flush batch use lazy MMU modeBenjamin Herrenschmidt
The current tlb flush code on powerpc 64 bits has a subtle race since we lost the page table lock due to the possible faulting in of new PTEs after a previous one has been removed but before the corresponding hash entry has been evicted, which can leads to all sort of fatal problems. This patch reworks the batch code completely. It doesn't use the mmu_gather stuff anymore. Instead, we use the lazy mmu hooks that were added by the paravirt code. They have the nice property that the enter/leave lazy mmu mode pair is always fully contained by the PTE lock for a given range of PTEs. Thus we can guarantee that all batches are flushed on a given CPU before it drops that lock. We also generalize batching for any PTE update that require a flush. Batching is now enabled on a CPU by arch_enter_lazy_mmu_mode() and disabled by arch_leave_lazy_mmu_mode(). The code epects that this is always contained within a PTE lock section so no preemption can happen and no PTE insertion in that range from another CPU. When batching is enabled on a CPU, every PTE updates that need a hash flush will use the batch for that flush. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Add inatomic versions of __get_user and __put_userBenjamin Herrenschmidt
Those are needed by things like alignment exception fixup handlers since those can now be triggered by copy_tofrom_user_inatomic. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename get_property to of_get_property: includeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Allow drivers to map individual 4k pages to userspacePaul Mackerras
Some drivers have resources that they want to be able to map into userspace that are 4k in size. On a kernel configured with 64k pages we currently end up mapping the 4k we want plus another 60k of physical address space, which could contain anything. This can introduce security problems, for example in the case of an infiniband adaptor where the other 60k could contain registers that some other program is using for its communications. This patch adds a new function, remap_4k_pfn, which drivers can use to map a single 4k page to userspace regardless of whether the kernel is using a 4k or a 64k page size. Like remap_pfn_range, it would typically be called in a driver's mmap function. It only maps a single 4k page, which on a 64k page kernel appears replicated 16 times throughout a 64k page. On a 4k page kernel it reduces to a call to remap_pfn_range. The way this works on a 64k kernel is that a new bit, _PAGE_4K_PFN, gets set on the linux PTE. This alters the way that __hash_page_4K computes the real address to put in the HPTE. The RPN field of the linux PTE becomes the 4k RPN directly rather than being interpreted as a 64k RPN. Since the RPN field is 32 bits, this means that physical addresses being mapped with remap_4k_pfn have to be below 2^44, i.e. 0x100000000000. The patch also factors out the code in arch/powerpc/mm/hash_utils_64.c that deals with demoting a process to use 4k pages into one function that gets called in the various different places where we need to do that. There were some discrepancies between exactly what was done in the various places, such as a call to spu_flush_all_slbs in one case but not in others. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Make struct property's value a void *Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename prom_n_size_cells to of_n_size_cellsStephen Rothwell
This is more consistent and gets us closer to the Sparc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename prom_n_addr_cells to of_n_addr_cellsStephen Rothwell
This is more consistent and gets us closer to the Sparc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell
This is more consistent and gets us closer to the Sparc code. We add a device_is_compatible define for compatibility during the change over. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename get_property to of_get_propertyStephen Rothwell
This is more consistent and gets us closer to the Sparc code. We add a get_property define for compatibility during the change over. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Use mtocrf instruction in asm when CONFIG_POWER4_ONLY=yOlof Johansson
mtocrf is a faster single-field mtcrf (move to condition register fields) instruction available in POWER4 and later processors. It can make quite a difference in performance on some implementations, so use it for CONFIG_POWER4_ONLY builds. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Add a unified uevent handler for bus based on of_deviceSylvain Munaut
This common uevent handler allow the several bus types based on of_device to generate the uevent properly and avoiding code duplication. This handlers take a struct device as argument and can therefore be used as the uevent call directly if no special treatment is needed for the bus. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13Merge branch 'linux-2.6' into for-2.6.22Paul Mackerras
2007-04-10Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: add "optical" to sysfs "media" attribute ide: ugly messages trying to open CD drive with no media present ide: correctly prevent IDE timer expiry function to run if request was already handled
2007-04-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] SGI Altix : fix pcibr_dmamap_ate32() bug [IA64] Fix CPU freq displayed in /proc/cpuinfo [IA64] Fix wrong assumption about irq and vector in msi_ia64.c [IA64] BTE error timer fix
2007-04-10ide: correctly prevent IDE timer expiry function to run if request was ↵Suleiman Souhlal
already handled It is possible for the timer expiry function to run even though the request has already been handled: ide_timer_expiry() only checks that the handler is not NULL, but it is possible that we have handled a request (thus clearing the handler) and then started a new request (thus starting the timer again, and setting a handler). A simple way to exhibit this is to set the DMA timeout to 1 jiffy and run dd: The kernel will panic after a few minutes because ide_timer_expiry() tries to add a timer when it's already active. To fix this, we simply add a request generation count that gets incremented at every interrupt, and check in ide_timer_expiry() that we have not already handled a new interrupt before running the expiry function. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-04-08[PATCH] Proper fix for highmem kmap_atomic functions for VMI for 2.6.21Zachary Amsden
Since lazy MMU batching mode still allows interrupts to enter, it is possible for interrupt handlers to try to use kmap_atomic, which fails when lazy mode is active, since the PTE update to highmem will be delayed. The best workaround is to issue an explicit flush in kmap_atomic_functions case; this is the only way nested PTE updates can happen in the interrupt handler. Thanks to Jeremy Fitzhardinge for noting the bug and suggestions on a fix. This patch gets reverted again when we start 2.6.22 and the bug gets fixed differently. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-07[PATCH] high-res timers: resume fixIngo Molnar
Soeren Sonnenburg reported that upon resume he is getting this backtrace: [<c0119637>] smp_apic_timer_interrupt+0x57/0x90 [<c0142d30>] retrigger_next_event+0x0/0xb0 [<c0104d30>] apic_timer_interrupt+0x28/0x30 [<c0142d30>] retrigger_next_event+0x0/0xb0 [<c0140068>] __kfifo_put+0x8/0x90 [<c0130fe5>] on_each_cpu+0x35/0x60 [<c0143538>] clock_was_set+0x18/0x20 [<c0135cdc>] timekeeping_resume+0x7c/0xa0 [<c02aabe1>] __sysdev_resume+0x11/0x80 [<c02ab0c7>] sysdev_resume+0x47/0x80 [<c02b0b05>] device_power_up+0x5/0x10 it turns out that on resume we mistakenly re-enable interrupts too early. Do the timer retrigger only on the current CPU. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Soeren Sonnenburg <kernel@nn7.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-06[IA64] SGI Altix : fix pcibr_dmamap_ate32() bugMike Habeck
On a SGI Altix TIOCP based PCI bus we need to include the ATE_PIO attribute bit if we're mapping a 32bit MSI address. Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-04-04[PATCH] ia64: desc_empty thinko/typo fixMaciej Zenczykowski
Just a one-byter for an ia64 thinko/typo - already fixed for i386 and x86_64. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04[PATCH] remove protection of LANANA-reserved majorsAndrew Morton
Revert all this. It can cause device-mapper to receive a different major from earlier kernels and it turns out that the Amanda backup program (via GNU tar, apparently) checks major numbers on files when performing incremental backups. Which is a bit broken of Amanda (or tar), but this feature isn't important enough to justify the churn. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04[PATCH] md: avoid a deadlock when removing a device from an md array via sysfsNeilBrown
A device can be removed from an md array via e.g. echo remove > /sys/block/md3/md/dev-sde/state This will try to remove the 'dev-sde' subtree which will deadlock since commit e7b0d26a86943370c04d6833c6edba2a72a6e240 With this patch we run the kobject_del via schedule_work so as to avoid the deadlock. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04libata: Limit ATAPI DMA to R/W commands only for TORiSAN DVD drives (take 3)Albert Lee
patch 4/4: Limit ATAPI DMA to R/W commands only for TORiSAN DRD-N216 DVD-ROM drives (http://bugzilla.kernel.org/show_bug.cgi?id=6710) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-04libata: Limit max sector to 128 for TORiSAN DVD drives (take 3)Albert Lee
patch 3/4: The TORiSAN drive locks up when max sector == 256. Limit max sector to 128 for the TORiSAN DRD-N216 drives. (http://bugzilla.kernel.org/show_bug.cgi?id=6710) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-04libata: reorder HSM_ST_FIRST for easier decoding (take 3)Albert Lee
patch 1/4: Reorder HSM_ST_FIRST, such that the task state transition is easier decoded with human eyes. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-02[SPARC]: Add unsigned to unused bit field in a.out.hRobert Reif
Add unsigned to unused bit field in a.out.h to make sparse happy. [ I took care of the sparc64 side as well -DaveM ] Signed-off-by: Robert Reif <reif@earthlink.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-02Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86: Don't probe for DDC on VBE1.2 [PATCH] x86-64: Increase NMI watchdog probing timeout [PATCH] x86-64: Let oprofile reserve MSR on all CPUs [PATCH] x86-64: Disable local APIC timer use on AMD systems with C1E
2007-04-02[PATCH] Fix microcode-related suspend problemRafael J. Wysocki
Fix the regression resulting from the recent change of suspend code ordering that causes systems based on Intel x86 CPUs using the microcode driver to hang during the resume. The problem occurs since the microcode driver uses request_firmware() in its CPU hotplug notifier, which is called after tasks has been frozen and hangs. It can be fixed by telling the microcode driver to use the microcode stored in memory during the resume instead of trying to load it from disk. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Adrian Bunk <bunk@stusta.de> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maxim <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-02[PATCH] driver core: fix built-in drivers sysfs linksKay Sievers
built-in drivers had broken sysfs links that caused bootup hangs for certain driver unregistry sequences. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-02[PATCH] uml: fix unreasonably long udelayPaolo 'Blaisorblade' Giarrusso
Currently we have a confused udelay implementation. * __const_udelay does not accept usecs but xloops in i386 and x86_64 * our implementation requires usecs as arg * it gets a xloops count when called by asm/arch/delay.h Bugs related to this (extremely long shutdown times) where reported by some x86_64 users, especially using Device Mapper. To hit this bug, a compile-time constant time parameter must be passed - that's why UML seems to work most times. Fix this with a simple udelay implementation. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-02[PATCH] x86-64: Disable local APIC timer use on AMD systems with C1EAndi Kleen
AMD dual core laptops with C1E do not run the APIC timer correctly when they go idle. Previously the code assumed this only happened on C2 or deeper. But not all of these systems report support C2. Use a AMD supplied snippet to detect C1E being enabled and then disable local apic timer use. This supercedes an earlier workaround using DMI detection of specific systems. Thanks to Mark Langsdorf for the detection snippet. Signed-off-by: Andi Kleen <ak@suse.de>
2007-04-01Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4298/1: fix memory barriers for DMA coherent and SMP platforms [ARM] 4295/2: Fix error-handling in pxaficp_ir.c (version 2) [ARM] Fix __NR_kexec_load [ARM] Export dma_channel_active() [ARM] 4296/1: ixp4xx: compile fix [ARM] 4289/1: AT91: SAM9260 NAND flash timing
2007-04-01[ARM] 4298/1: fix memory barriers for DMA coherent and SMP platformsLennert Buytenhek
This patch: - Switches mb/rmb/wmb back to being full-blown DMBs on ARM SMP systems, since mb/rmb/wmb are required to order Normal memory accesses as well. - Enables the use of DMB and ISB on XSC3 (which is an ARMv5TE ISA core but conforms to the ARMv6 memory ordering model and supports the various ARMv6 barriers.) - Makes DMA coherent platforms (only ixp23xx at the moment) map mb/rmb/wmb to dmb(), as on DMA coherent platforms, DMA consistent mappings are done as Normal mappings, which are weakly ordered. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-01[ARM] Fix __NR_kexec_loadRussell King
It's __NR_kexec_load, not __NR_sys_kexec_load Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-30[PATCH] uml: fix static linking for realPaolo 'Blaisorblade' Giarrusso
There was a typo in commit 7632fc8f809a97f9d82ce125e8e3e579390ce2e5, preventing it from working - 32bit binaries crashed hopelessly before the below fix and work perfectly now. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-30[ARM] 4296/1: ixp4xx: compile fixVladimir Barinov
Fix compilation fail for ixp4xx platforms for the case when CONFIG_IXP4XX_INDIRECT_PCI is set. That is due to the check_signature() is appeared in include/linux/io.h. Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-29[MIPS] SMTC: Fix recursion in instant IPI replay code.Ralf Baechle
local_irq_restore -> raw_local_irq_restore -> irq_restore_epilog -> smtc_ipi_replay -> smtc_ipi_dq -> spin_unlock_irqrestore -> _spin_unlock_irqrestore -> local_irq_restore The recursion does abort when there is no more IPI queued for a CPU, so this isn't usually fatal which is why we got away with this for so long until this was discovered by code inspection. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-29[MIPS] MV64340: Add missing prototype for mv64340_irq_init().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-29Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IFB]: Fix crash on input device removal [BNX2]: Fix link interrupt problem.
2007-03-29[POWERPC] qe: ucc_slow.guemr is in the wrong placeTimur Tabi
The definition of struct ucc_slow puts the guemr register immediately after the utpt register, when it should be at offset 0x90. This patch adds the missing 0x52-byte padding. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-29[IFB]: Fix crash on input device removalPatrick McHardy
The input_device pointer is not refcounted, which means the device may disappear while packets are queued, causing a crash when ifb passes packets with a stale skb->dev pointer to netif_rx(). Fix by storing the interface index instead and do a lookup where neccessary. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>