aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-10-30ALSA: ASoC: Fix mono controls after conversion to support full int masksMark Brown
When ASoC was converted to support full int width masks SOC_SINGLE_VALUE() omitted the assignment of rshift, causing the control operatins to report some mono controls as stereo. This happened to work some of the time due to a confusion between shift and min in snd_soc_info_volsw(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-13ALSA: ASoC: Allow machine drivers to mark pins as not connectedMark Brown
Add a new API call snd_soc_dapm_nc_pin() which allows machine drivers to mark pins as being permanently disabled. At present this is identical to snd_soc_dapm_disable_pin() except in terms of improving the internal documentation of machine drivers that use it. The intention is that in future it will be extended to provide additional features such as hiding controls that are only relevant to paths using the disconnected pin. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-10ALSA: Increase components array sizeTakashi Iwai
Increase the card components[] (and thus snd_card_info.components[], too) array size from 80 to 128 chars so that more strings can be stored. The 80 chars aren't enough for more than 2 HD-audio codecs, and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP 2230s. The control protocol number is increased to 2.0.6 as well, in case it matters. Reported-by: Wu Fengguang <wfg@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: Remove bitwise from snd_pcm_hw_param_tTakashi Iwai
We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: Separate common pxa2xx-pcm codeDmitry Baryshkov
ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code. Move it to pxa2xx-lib. [Fixed some checkpatch warnings -- broonie] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-23ALSA: Separate common pxa2xx-ac97 codeDmitry Baryshkov
ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code. Move all common code into separate module snd-pxa2xx-lib. [Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings -- broonie] Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: Release v1.0.18rc3Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: remove stale filesTakashi Iwai
Empty files remained likely due to wrong patching. Remove them now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: ALS4000 driver work, step 2Andreas Mohr
- more register naming work - finally figured out that weird CR register stuff (and did I mention that I hate _really_ undecipherable open-coded values?) - fix handling of IRQ sharing in interrupt handler (hopefully properly, otherwise I'd be grateful to hear your pedantic comments ;) - add handy SPECS_PAGE references wherever useful - comments, cleanup - add me as module author Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: Allocate larger pages in sgbufTakashi Iwai
Most hardwares have limited buffer-descriptor table length. This also restricts the max buffer size of the sound driver. For example, snd-hda-intel has 1MB buffer size limit, and this is because it can have at most 256 BDL entries. For supporting larger buffers, we need to allocate larger pages even for sg-buffers. This patch changes the sgbuf allocation code to try to allocate larger pages first. At each head of the allocated pages, the number of allocated pages is stored in the lowest bits of the corresponding entry of the table addr field. This change isn't visible as long as the driver uses snd_sgbuf_get_addr() helper. Also, the patch adds a new function, snd_pcm_sgbuf_get_chunk_size(). This returns the size of the chunk on continuous pages starting at the given position offset. If the chunk reaches to a non-continuous page, it returns the size to the boundary. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-25ALSA: Clean up SG-buffer helper functions and macrosTakashi Iwai
Clean up SG-buffer helper functions and macros. Helpers take substream as arguments now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: release v1.0.18rc1Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Clean up snd_BUG()Takashi Iwai
Use the standard WARN() macro for snd_BUG(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() definitionTakashi Iwai
Remove snd_assert() completely now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in other placesTakashi Iwai
Kill snd_assert() in other places, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in sound/core/*Takashi Iwai
Kill snd_assert() in sound/core/*, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Introduce snd_BUG_ON() macroTakashi Iwai
Introduced snd_BUG_ON() macro as a replacement of snd_assert() macro. snd_assert() is pretty ugly as it has the control flow in its argument. OTOH, snd_BUG_ON() behaves like a normal conditional, thus it's much easier to read the flow. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss detection code instead of ad1848 oneKrzysztof Helt
Use the wss detection code and kill the ad1848 library. The library is fully assimilated into the new wss library. This required reworking of the AD1848 family code so the code is changed to correctly detect chips from the AD1848 and CS4231 families. I have tested it on following cards: Gallant SC-6600 (codec: AD1848, driver: snd-sc6600) SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape) SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy) Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x) Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236) Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330) Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232) Sound playback and recording works on all these cards. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss pcm code instead of ad1848 oneKrzysztof Helt
Use the wss pcm code and kill the ad1848 pcm code. The AD1848 chip is much slower than CS4231 chips so the waiting loop was increased 100x (10x is not enough). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss mixer code instead of ad1848 oneKrzysztof Helt
Use the wss mixer code and kill the ad1848 mixer code. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)Krzysztof Helt
Use CS4231P instead of AD1848P (kill the AD1848P). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: replace ad1848 mixer element macros with wss onesKrzysztof Helt
Use the wss macros instead of ad1848 ones. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use wss constants instead of ad1848 onesKrzysztof Helt
Use wss constants for mode. Move ad1848 hardware constants to the wss.h. Move mixer tlv macros into the ad1848_lib.c from the ad1848.h. Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem to be needed. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: use struct snd_wss instead of snd_ad1848Krzysztof Helt
The snd_wss is superset of the snd_ad1848 so kill the latter and replace it with the snd_wss. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rename cs4321_foo to wss_fooKrzysztof Helt
Rename functions and structures from the former cs4321_lib to names more corresponding with the new name: wss_lib. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-06ALSA: wss_lib: rename cs4231.h into wss.hKrzysztof Helt
Rename file include/sound/cs4231.h into include/sound/wss.h Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reviewed-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICEPawel MOLL
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine to have more than 8 PCM devices per card, except one place - the SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate devices > 7. This patch fixes the issue, changing the devices list organisation. Instead of adding new device to the tail, the list is now kept always ordered (by card number, then device number). Thus, during enumeration, it is easy to discover the fact that there is no more given card's devices. Additionally the device field of struct snd_pcm had to be changed to int, as its "unsignednity" caused a lot of problems when comparing it to potentially negative signed values. (-1 is 0xffffffff or even more then ;-) Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01ALSA: Add USB US122L driverKarsten Wiese
Added a new US122L usb-audio driver. This driver works together with a dedicated alsa-lib plugin. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01sound: Revert "ALSA: Fix limit of 8 PCM devices in ↵Jaroslav Kysela
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE" This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866. New, updated patch with same subject replaces this commit. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-01ALSA: IEC958 definition for consumer status channel updatePawel MOLL
Updated IEC958 consumer status channel definitions according to the third edition of IEC60958-3 spec. Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICEPawel MOLL
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine to have more than 8 PCM devices per card, except one place - the SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate devices > 7. This patch fixes the issue, changing the devices list organisation. Instead of adding new device to the tail, the list is now kept always ordered (by card number, then device number). Thus, during enumeration, it is easy to discover the fact that there is no more given card's devices. The same limit was present in OSS emulation code. It has been fixed as well. Additionally the device field of struct snd_pcm is now int, instead of unsigned int, as there is no obvious reason for keeping it unsigned. This caused a lot of problems with comparing this value with other (almost always signed) variables. There is just one more place where device number is unsigned - in struct snd_pcm_info, which should be also sorted out in future. Signed-off-by: Pawel MOLL <pawel.moll@st.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: convert use of uint to unsigned intJon Smirl
ASOC: convert use of uint to unsigned int Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Make OpenFirmware helper include file conditionalMark Brown
The OpenFirmware API headers don't build on all platforms so ensure that they are not included unless they are being used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Add OpenFirmware helper for matching bus and codec driversGrant Likely
Simple utility layer for creating ASoC machine instances based on data in the OpenFirmware device tree. OF aware platform drivers and codec drivers register themselves with this framework and the framework automatically instantiates a machine driver. At the moment, the driver is not very capable and it is expected to be extended as more features are needed for specifying the configuration in the device tree. This is most likely temporary glue code to work around limitations in the ASoC v1 framework. When v2 is merged, most of this driver will need to be reworked. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Rename mask to max to reflect usageJon Smirl
Most of the ASoC controls refer to the maximum value that can be set for a control as mask but there is no actual requirement for all bits to be set at the highest possible value making the name mask misleading. Change the code to use max instead. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Convert bitfields in ASoC into full int widthJon Smirl
Convert bitfields in ASoC into full int width. This is a simple mechanical conversion. Two places in the DAPM code were fixed to properly use mask. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Allow codecs to override register displayMark Brown
Some codecs have unusual features in their register maps such as very large registers representing arrays of coefficients. Support these codecs in the register cache sysfs file by allowing them to provide a function register_display() overriding the default output for register contents. Also ensure that we don't overflow PAGE_SIZE while writing out the register dump. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: Add jack reporting APIMark Brown
Currently very few systems provide information about jack status to user space, even though many have hardware facilities to do detection. Those systems that do use an input device with the existing SW_HEADPHONE_INSERT switch type to do so, often independently of ALSA. This patch introduces a standard method for representing jacks to user space into ALSA. It allows drivers to register jacks for a sound card with the input subsystem, binding the input device to the card to help user space associate the input devices with their sound cards. The created input devices are named in the form "card longname jack" where jack is provided by the driver when allocating a jack. By default the parent for the input device is the sound card but this can be overridden by the card driver. The existing user space API with SW_HEADPHONE_INSERT is preserved. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: workaround for bogus gcc warning in ide_sysfs_register_port() ide-cd: Optiarc DVD RW AD-7200A does play audio IDE: Fix platform device registration in Swarm IDE driver (v2) ide-dma: fix ide_build_dmatable() for TRM290 ide-cd: temporary tray close fix
2008-10-06[MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=yRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-05ide-cd: temporary tray close fixBorislav Petkov
This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602. A more generic fix for drives which cannot autoclose tray will follow. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> [bart: add an extra parentheses for consistency with the rest of kernel code] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-03include/linux/stacktrace.h: declare struct task_structAndrew Morton
include/linux/stacktrace.h:13: warning: 'struct task_struct' declared inside parameter list (This might be a hard error on sparc64, which uses this header and has -Werror) Reported-by: "Randy.Dunlap" <rdunlap@xenotime.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03[MIPS] SMTC: Fix SMTC dyntick support.Kevin D. Kissell
Rework of SMTC support to make it work with the new clock event system, allowing "tickless" operation, and to make it compatible with the use of the "wait_irqoff" idle loop. The new clocking scheme means that the previously optional IPI instant replay mechanism is now required, and has been made more robust. Signed-off-by: Kevin D. Kissell <kevink@paralogos.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-03[MIPS] SMTC: Close tiny holes in the SMTC IPI replay system.Kevin D. Kissell
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-03[MIPS] Build fix: Fix irq flags typeRalf Baechle
Though from a hardware perspective it would be sensible to use only a 32-bit unsigned int type Linux defines interrupt flags to be stored in an unsigned long and nothing else. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-02mm: tiny-shmem nommu fixNick Piggin
The previous patch db203d53d474aa068984e409d807628f5841da1b ("mm: tiny-shmem fix lock ordering: mmap_sem vs i_mutex") to fix the lock ordering in tiny-shmem breaks shared anonymous and IPC memory on NOMMU architectures because it was using the expanding truncate to signal ramfs to allocate a physically contiguous RAM backing the inode (otherwise it is unusable for "memory mapping" it to userspace). However do_truncate is what caused the lock ordering error, due to it taking i_mutex. In this case, we can actually just call ramfs directly to allocate memory for the mapping, rather than go via truncate. Acked-by: David Howells <dhowells@redhat.com> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02inotify: fix lock ordering wrt do_page_fault's mmap_semNick Piggin
Fix inotify lock order reversal with mmap_sem due to holding locks over copy_to_user. Signed-off-by: Nick Piggin <npiggin@suse.de> Reported-by: "Daniel J Blueman" <daniel.blueman@gmail.com> Tested-by: "Daniel J Blueman" <daniel.blueman@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: af_key: Free dumping state on socket close XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep ipv6: NULL pointer dereferrence in tcp_v6_send_ack tcp: Fix NULL dereference in tcp_4_send_ack() sctp: Fix kernel panic while process protocol violation parameter iucv: Fix mismerge again. ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space
2008-09-30Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: prevent migration of per CPU hrtimers hrtimer: mark migration state hrtimer: fix migration of CB_IRQSAFE_NO_SOFTIRQ hrtimers hrtimer: migrate pending list on cpu offline Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2008-09-30sctp: Fix kernel panic while process protocol violation parameterWei Yongjun
Since call to function sctp_sf_abort_violation() need paramter 'arg' with 'struct sctp_chunk' type, it will read the chunk type and chunk length from the chunk_hdr member of chunk. But call to sctp_sf_violation_paramlen() always with 'struct sctp_paramhdr' type's parameter, it will be passed to sctp_sf_abort_violation(). This may cause kernel panic. sctp_sf_violation_paramlen() |-- sctp_sf_abort_violation() |-- sctp_make_abort_violation() This patch fixed this problem. This patch also fix two place which called sctp_sf_violation_paramlen() with wrong paramter type. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>