| Age | Commit message (Collapse) | Author |
|---|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
netxen: update copyright
netxen: fix tx timeout recovery
netxen: fix file firmware leak
netxen: improve pci memory access
netxen: change firmware write size
tg3: Fix return ring size breakage
netxen: build fix for INET=n
cdc-phonet: autoconfigure Phonet address
Phonet: back-end for autoconfigured addresses
Phonet: fix netlink address dump error handling
ipv6: Add IFA_F_DADFAILED flag
net: Add DEVTYPE support for Ethernet based devices
mv643xx_eth.c: remove unused txq_set_wrr()
ucc_geth: Fix hangs after switching from full to half duplex
ucc_geth: Rearrange some code to avoid forward declarations
phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
drivers/net/phy: introduce missing kfree
drivers/net/wan: introduce missing kfree
net: force bridge module(s) to be GPL
Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
...
Fixed up trivial conflicts:
- arch/x86/include/asm/socket.h
converted to <asm-generic/socket.h> in the x86 tree. The generic
header has the same new #define's, so that works out fine.
- drivers/net/tun.c
fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
switched over to using 'tun->socket.sk' instead of the redundantly
available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
to the TUN driver") which added a new 'tun->sk' use.
Noted in 'next' by Stephen Rothwell.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-percpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, percpu: Collect hot percpu variables into one cacheline
x86, percpu: Fix DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED()
x86, percpu: Add 'percpu_read_stable()' interface for cacheable accesses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/i386: Put aligned stack-canary in percpu shared_aligned section
x86/i386: Make sure stack-protector segment base is cache aligned
x86: Detect stack protector for i386 builds on x86_64
x86: allow "=rm" in native_save_fl()
x86: properly annotate alternatives.c
x86: Introduce GDT_ENTRY_INIT(), initialize bad_bios_desc statically
x86, 32-bit: Use generic sys_pipe()
x86: Introduce GDT_ENTRY_INIT(), fix APM
x86: Introduce GDT_ENTRY_INIT()
x86: Introduce set_desc_base() and set_desc_limit()
x86: Remove unused patch_espfix_desc()
x86: Use get_desc_base()
|
|
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (87 commits)
NFSv4: Disallow 'mount -t nfs4 -overs=2' and 'mount -t nfs4 -overs=3'
NFS: Allow the "nfs" file system type to support NFSv4
NFS: Move details of nfs4_get_sb() to a helper
NFS: Refactor NFSv4 text-based mount option validation
NFS: Mount option parser should detect missing "port="
NFS: out of date comment regarding O_EXCL above nfs3_proc_create()
NFS: Handle a zero-length auth flavor list
SUNRPC: Ensure that sunrpc gets initialised before nfs, lockd, etc...
nfs: fix compile error in rpc_pipefs.h
nfs: Remove reference to generic_osync_inode from a comment
SUNRPC: cache must take a reference to the cache detail's module on open()
NFS: Use the DNS resolver in the mount code.
NFS: Add a dns resolver for use with NFSv4 referrals and migration
SUNRPC: Fix a typo in cache_pipefs_files
nfs: nfs4xdr: optimize low level decoding
nfs: nfs4xdr: get rid of READ_BUF
nfs: nfs4xdr: simplify decode_exchange_id by reusing decode_opaque_inline
nfs: nfs4xdr: get rid of COPYMEM
nfs: nfs4xdr: introduce decode_sessionid helper
nfs: nfs4xdr: introduce decode_verifier helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits)
pata_rz1000: use printk_once
ahci: kill @force_restart and refine CLO for ahci_kick_engine()
pata_cs5535: add pci id for AMD based CS5535 controllers
ahci: Add AMD SB900 SATA/IDE controller device IDs
drivers/ata: use resource_size
sata_fsl: Defer non-ncq commands when ncq commands active
libata: add SATA PMP revision information for spec 1.2
libata: fix off-by-one error in ata_tf_read_block()
ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA
ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
dmi: extend dmi_get_year() to dmi_get_date()
dmi: fix date handling in dmi_get_year()
libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru()
sata_sis: convert to slave_link
sata_sil24: always set protocol override for non-ATAPI data commands
libata: Export AHCI capabilities
libata: Delegate nonrot flag setting to SCSI
[libata] Add pata_rdc driver for RDC ATA devices
drivers/ata: Remove unnecessary semicolons
libata: remove spindown skipping and warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
ring-buffer: only enable ring_buffer_swap_cpu when needed
ring-buffer: check for swapped buffers in start of committing
tracing: report error in trace if we fail to swap latency buffer
tracing: add trace_array_printk for internal tracers to use
tracing: pass around ring buffer instead of tracer
tracing: make tracing_reset safe for external use
tracing: use timestamp to determine start of latency traces
tracing: Remove mentioning of legacy latency_trace file from documentation
tracing/filters: Defer pred allocation, fix memory leak
tracing: remove users of tracing_reset
tracing: disable buffers and synchronize_sched before resetting
tracing: disable update max tracer while reading trace
tracing: print out start and stop in latency traces
ring-buffer: disable all cpu buffers when one finds a problem
ring-buffer: do not count discarded events
ring-buffer: remove ring_buffer_event_discard
ring-buffer: fix ring_buffer_read crossing pages
ring-buffer: remove unnecessary cpu_relax
ring-buffer: do not swap buffers during a commit
ring-buffer: do not reset while in a commit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
sched: Fix sched::sched_stat_wait tracepoint field
sched: Disable NEW_FAIR_SLEEPERS for now
sched: Keep kthreads at default priority
sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
sched: Turn off child_runs_first
sched: Ensure that a child can't gain time over it's parent after fork()
sched: enable SD_WAKE_IDLE
sched: Deal with low-load in wake_affine()
sched: Remove short cut from select_task_rq_fair()
sched: Turn on SD_BALANCE_NEWIDLE
sched: Clean up topology.h
sched: Fix dynamic power-balancing crash
sched: Remove reciprocal for cpu_power
sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
sched: Try to deal with low capacity
sched: Scale down cpu_power due to RT tasks
sched: Implement dynamic cpu_power
sched: Add smt_gain
sched: Update the cpu_power sum during load-balance
sched: Add SD_PREFER_SIBLING
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
perf tools: Avoid unnecessary work in directory lookups
perf stat: Clean up statistics calculations a bit more
perf stat: More advanced variance computation
perf stat: Use stddev_mean in stead of stddev
perf stat: Remove the limit on repeat
perf stat: Change noise calculation to use stddev
x86, perf_counter, bts: Do not allow kernel BTS tracing for now
x86, perf_counter, bts: Correct pointer-to-u64 casts
x86, perf_counter, bts: Fail if BTS is not available
perf_counter: Fix output-sharing error path
perf trace: Fix read_string()
perf trace: Print out in nanoseconds
perf tools: Seek to the end of the header area
perf trace: Fix parsing of perf.data
perf trace: Sample timestamps as well
perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access
perf trace: Sample the CPU too
perf tools: Work around strict aliasing related warnings
perf tools: Clean up warnings list in the Makefile
perf tools: Complete support for dynamic strings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (55 commits)
arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type
Revert "x86: oprofile/op_model_amd.c set return values for op_amd_handle_ibs()"
x86/oprofile: Small coding style fixes
x86/oprofile: Add counter reservation check for virtual counters
x86/oprofile: Implement op_x86_virt_to_phys()
oprofile: Adding switch counter to oprofile statistic variables
x86/oprofile: Implement mux_clone()
x86/oprofile: Enable multiplexing only if the model supports it
x86/oprofile: Add function has_mux() to check multiplexing support
x86/oprofile: Modify initialization of num_virt_counters
x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec
x86/oprofile: Remove const qualifier from struct op_x86_model_spec
x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c
x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c
x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c
x86/oprofile: Implement multiplexing setup/shutdown functions
oprofile: Grouping multiplexing code in op_model_amd.c
oprofile: Introduce op_x86_phys_to_virt()
oprofile: Grouping multiplexing code in oprof.c
oprofile: Remove oprofile_multiplexing_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Do not mask oneshot edge type interrupts
genirq: Support nested threaded irq handling
genirq: Add buslock support
genirq: Add oneshot support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
pci/intr_remapping: Allocate irq_iommu on node
irq: Add irq_node() primitive
irq: Make sure irq_desc for legacy irq get correct node setting
genirq: Add prototype for handle_nested_irq()
irq: Remove superfluous NULL pointer check in check_irq_resend()
irq: Clean up by removing irqfixup MODULE_PARM_DESC()
genirq: Fix comment describing suspend_device_irqs()
genirq: Remove obsolete defines and typedefs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
rcu: Move end of special early-boot RCU operation earlier
rcu: Changes from reviews: avoid casts, fix/add warnings, improve comments
rcu: Create rcutree plugins to handle hotplug CPU for multi-level trees
rcu: Remove lockdep annotations from RCU's _notrace() API members
rcu: Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
rcu: Add CPU-offline processing for single-node configurations
rcu: Add "notrace" to RCU function headers used by ftrace
rcu: Remove CONFIG_PREEMPT_RCU
rcu: Merge preemptable-RCU functionality into hierarchical RCU
rcu: Simplify rcu_pending()/rcu_check_callbacks() API
rcu: Use debugfs_remove_recursive() simplify code.
rcu: Merge per-RCU-flavor initialization into pre-existing macro
rcu: Fix online/offline indication for rcudata.csv trace file
rcu: Consolidate sparse and lockdep declarations in include/linux/rcupdate.h
rcu: Renamings to increase RCU clarity
rcu: Move private definitions from include/linux/rcutree.h to kernel/rcutree.h
rcu: Expunge lingering references to CONFIG_CLASSIC_RCU, optimize on !SMP
rcu: Delay rcu_barrier() wait until beginning of next CPU-hotunplug operation.
rcu: Fix typo in rcu_irq_exit() comment header
rcu: Make rcupreempt_trace.c look at offline CPUs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
locking, m68k/asm-offsets: Rename signal defines
locking: Inline spinlock code for all locking variants on s390
locking: Simplify spinlock inlining
locking: Allow arch-inlined spinlocks
locking: Move spinlock function bodies to header file
locking, m68k: Calculate thread_info offset with asm offset
locking, m68k/asm-offsets: Rename pt_regs offset defines
locking, sparc: Rename __spin_try_lock() and friends
locking, powerpc: Rename __spin_try_lock() and friends
lockdep: Remove recursion stattistics
lockdep: Simplify lock_stat seqfile code
lockdep: Simplify lockdep_chains seqfile code
lockdep: Simplify lockdep seqfile code
lockdep: Fix missing entries in /proc/lock_chains
lockdep: Fix missing entry in /proc/lock_stat
lockdep: Fix memory usage info of BFS
lockdep: Reintroduce generation count to make BFS faster
lockdep: Deal with many similar locks
lockdep: Introduce lockdep_assert_held()
lockdep: Fix style nits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (59 commits)
x86/gart: Do not select AGP for GART_IOMMU
x86/amd-iommu: Initialize passthrough mode when requested
x86/amd-iommu: Don't detach device from pt domain on driver unbind
x86/amd-iommu: Make sure a device is assigned in passthrough mode
x86/amd-iommu: Align locking between attach_device and detach_device
x86/amd-iommu: Fix device table write order
x86/amd-iommu: Add passthrough mode initialization functions
x86/amd-iommu: Add core functions for pd allocation/freeing
x86/dma: Mark iommu_pass_through as __read_mostly
x86/amd-iommu: Change iommu_map_page to support multiple page sizes
x86/amd-iommu: Support higher level PTEs in iommu_page_unmap
x86/amd-iommu: Remove old page table handling macros
x86/amd-iommu: Use 2-level page tables for dma_ops domains
x86/amd-iommu: Remove bus_addr check in iommu_map_page
x86/amd-iommu: Remove last usages of IOMMU_PTE_L0_INDEX
x86/amd-iommu: Change alloc_pte to support 64 bit address space
x86/amd-iommu: Introduce increase_address_space function
x86/amd-iommu: Flush domains if address space size was increased
x86/amd-iommu: Introduce set_dte_entry function
x86/amd-iommu: Add a gneric version of amd_iommu_flush_all_devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
debug lockups: Improve lockup detection, fix generic arch fallback
debug lockups: Improve lockup detection
|
|
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some cases, the network device driver knows what layer-3 address the
device should have. This adds support for the Phonet stack to
automatically request from the driver and add that address to the
network device.
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add IFA_F_DADFAILED flag to denote an IPv6 address that has
failed Duplicate Address Detection, that way tools like
/sbin/ip can be more informative.
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 2001:db8::1/64 scope global tentative dadfailed
valid_lft forever preferred_lft forever
Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Ethernet framing is used for a lot of devices these days. Most
prominent are WiFi and WiMAX based devices. However for userspace
application it is important to classify these devices correctly and
not only see them as Ethernet devices. The daemons like HAL, DeviceKit
or even NetworkManager with udev support tries to do the classification
in userspace with a lot trickery and extra system calls. This is not
good and actually reaches its limitations. Especially since the kernel
does know the type of the Ethernet device it is pretty stupid.
To solve this problem the underlying device type needs to be set and
then the value will be exported as DEVTYPE via uevents and available
within udev.
# cat /sys/class/net/wlan0/uevent
DEVTYPE=wlan
INTERFACE=wlan0
IFINDEX=5
This is similar to subsystems like USB and SCSI that distinguish
between hosts, devices, disks, partitions etc.
The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual
device type. All device types are free form, but for convenience the
same strings as used with RFKILL are choosen.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (102 commits)
crypto: sha-s390 - Fix warnings in import function
crypto: vmac - New hash algorithm for intel_txt support
crypto: api - Do not displace newly registered algorithms
crypto: ansi_cprng - Fix module initialization
crypto: xcbc - Fix alignment calculation of xcbc_tfm_ctx
crypto: fips - Depend on ansi_cprng
crypto: blkcipher - Do not use eseqiv on stream ciphers
crypto: ctr - Use chainiv on raw counter mode
Revert crypto: fips - Select CPRNG
crypto: rng - Fix typo
crypto: talitos - add support for 36 bit addressing
crypto: talitos - align locks on cache lines
crypto: talitos - simplify hmac data size calculation
crypto: mv_cesa - Add support for Orion5X crypto engine
crypto: cryptd - Add support to access underlaying shash
crypto: gcm - Use GHASH digest algorithm
crypto: ghash - Add GHASH digest algorithm for GCM
crypto: authenc - Convert to ahash
crypto: api - Fix aligned ctx helper
crypto: hmac - Prehash ipad/opad
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (377 commits)
ASoC: au1x: PSC-AC97 bugfixes
ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
ALSA: dummy - Add debug proc file
ALSA: Add const prefix to proc helper functions
ALSA: Re-export snd_pcm_format_name() function
ALSA: hda - Use auto model for HP laptops with ALC268 codec
ALSA: cs46xx - Fix minimum period size
ASoC: Fix WM835x Out4 capture enumeration
ALSA: Remove unneeded ifdef from sound/core.h
ALSA: Remove struct snd_monitor_file from public sound/core.h
ASoC: Remove unuused hw_read_t
sound: oxygen: work around MCE when changing volume
ALSA: dummy - Fake buffer allocations
ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital
ASoC: fix pxa2xx-ac97.c breakage
ALSA: dummy - Fix the timer calculation in systimer mode
ALSA: dummy - Add more description
ALSA: dummy - Better jiffies handling
ALSA: dummy - Support high-res timer mode
ALSA: Release v1.0.21
...
|
|
* 'writeback' of git://git.kernel.dk/linux-2.6-block:
writeback: check for registered bdi in flusher add and inode dirty
writeback: add name to backing_dev_info
writeback: add some debug inode list counters to bdi stats
writeback: get rid of pdflush completely
writeback: switch to per-bdi threads for flushing data
writeback: move dirty inodes from super_block to backing_dev_info
writeback: get rid of generic_sync_sb_inodes() export
|
|
* 'kmemleak' of git://linux-arm.org/linux-2.6:
kmemleak: Improve the "Early log buffer exceeded" error message
kmemleak: fix sparse warning for static declarations
kmemleak: fix sparse warning over overshadowed flags
kmemleak: move common painting code together
kmemleak: add clear command support
kmemleak: use bool for true/false questions
kmemleak: Do no create the clean-up thread during kmemleak_disable()
kmemleak: Scan all thread stacks
kmemleak: Don't scan uninitialized memory when kmemcheck is enabled
kmemleak: Ignore the aperture memory hole on x86_64
kmemleak: Printing of the objects hex dump
kmemleak: Do not report alloc_bootmem blocks as leaks
kmemleak: Save the stack trace for early allocations
kmemleak: Mark the early log buffer as __initdata
kmemleak: Dump object information on request
kmemleak: Allow rescheduling during an object scanning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (57 commits)
binfmt_elf: fix PT_INTERP bss handling
TPM: Fixup boot probe timeout for tpm_tis driver
sysfs: Add labeling support for sysfs
LSM/SELinux: inode_{get,set,notify}secctx hooks to access LSM security context information.
VFS: Factor out part of vfs_setxattr so it can be called from the SELinux hook for inode_setsecctx.
KEYS: Add missing linux/tracehook.h #inclusions
KEYS: Fix default security_session_to_parent()
Security/SELinux: includecheck fix kernel/sysctl.c
KEYS: security_cred_alloc_blank() should return int under all circumstances
IMA: open new file for read
KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]
KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]
KEYS: Do some whitespace cleanups [try #6]
KEYS: Make /proc/keys use keyid not numread as file position [try #6]
KEYS: Add garbage collection for dead, revoked and expired keys. [try #6]
KEYS: Flag dead keys to induce EKEYREVOKED [try #6]
KEYS: Allow keyctl_revoke() on keys that have SETATTR but not WRITE perm [try #6]
KEYS: Deal with dead-type keys appropriately [try #6]
CRED: Add some configurable debugging [try #6]
selinux: Support for the new TUN LSM hooks
...
|
|
Also a debugging aid. We want to catch dirty inodes being added to
backing devices that don't do writeback.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This enables us to track who does what and print info. Its main use
is catching dirty inodes on the default_backing_dev_info, so we can
fix that up.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
It is now unused, so kill it off.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This gets rid of pdflush for bdi writeout and kupdated style cleaning.
pdflush writeout suffers from lack of locality and also requires more
threads to handle the same workload, since it has to work in a
non-blocking fashion against each queue. This also introduces lumpy
behaviour and potential request starvation, since pdflush can be starved
for queue access if others are accessing it. A sample ffsb workload that
does random writes to files is about 8% faster here on a simple SATA drive
during the benchmark phase. File layout also seems a LOT more smooth in
vmstat:
r b swpd free buff cache si so bi bo in cs us sy id wa
0 1 0 608848 2652 375372 0 0 0 71024 604 24 1 10 48 42
0 1 0 549644 2712 433736 0 0 0 60692 505 27 1 8 48 44
1 0 0 476928 2784 505192 0 0 4 29540 553 24 0 9 53 37
0 1 0 457972 2808 524008 0 0 0 54876 331 16 0 4 38 58
0 1 0 366128 2928 614284 0 0 4 92168 710 58 0 13 53 34
0 1 0 295092 3000 684140 0 0 0 62924 572 23 0 9 53 37
0 1 0 236592 3064 741704 0 0 4 58256 523 17 0 8 48 44
0 1 0 165608 3132 811464 0 0 0 57460 560 21 0 8 54 38
0 1 0 102952 3200 873164 0 0 4 74748 540 29 1 10 48 41
0 1 0 48604 3252 926472 0 0 0 53248 469 29 0 7 47 45
where vanilla tends to fluctuate a lot in the creation phase:
r b swpd free buff cache si so bi bo in cs us sy id wa
1 1 0 678716 5792 303380 0 0 0 74064 565 50 1 11 52 36
1 0 0 662488 5864 319396 0 0 4 352 302 329 0 2 47 51
0 1 0 599312 5924 381468 0 0 0 78164 516 55 0 9 51 40
0 1 0 519952 6008 459516 0 0 4 78156 622 56 1 11 52 37
1 1 0 436640 6092 541632 0 0 0 82244 622 54 0 11 48 41
0 1 0 436640 6092 541660 0 0 0 8 152 39 0 0 51 49
0 1 0 332224 6200 644252 0 0 4 102800 728 46 1 13 49 36
1 0 0 274492 6260 701056 0 0 4 12328 459 49 0 7 50 43
0 1 0 211220 6324 763356 0 0 0 106940 515 37 1 10 51 39
1 0 0 160412 6376 813468 0 0 0 8224 415 43 0 6 49 45
1 1 0 85980 6452 886556 0 0 4 113516 575 39 1 11 54 34
0 2 0 85968 6452 886620 0 0 0 1640 158 211 0 0 46 54
A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A
SSD based writeback test on XFS performs over 20% better as well, with
the throughput being very stable around 1GB/sec, where pdflush only
manages 750MB/sec and fluctuates wildly while doing so. Random buffered
writes to many files behave a lot better as well, as does random mmap'ed
writes.
A separate thread is added to sync the super blocks. In the long term,
adding sync_supers_bdi() functionality could get rid of this thread again.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This is a first step at introducing per-bdi flusher threads. We should
have no change in behaviour, although sb_has_dirty_inodes() is now
ridiculously expensive, as there's no easy way to answer that question.
Not a huge problem, since it'll be deleted in subsequent patches.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This adds two new exported functions:
- writeback_inodes_sb(), which only attempts to writeback dirty inodes on
this super_block, for WB_SYNC_NONE writeout.
- sync_inodes_sb(), which writes out all dirty inodes on this super_block
and also waits for the IO to complete.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
Add AMD SB900 SATA/IDE controller device IDs.
Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
|
|
|
|
* topic/ymfpci:
sound: ymfpci: increase timer resolution to 96 kHz
|
|
* topic/tlv-minmax:
ALSA: usb-audio - Correct bogus volume dB information
ALSA: usb-audio - Use the new TLV_DB_MINMAX type
ALSA: Add new TLV types for dBwith min/max
|
|
* topic/soundcore-preclaim:
sound: make OSS device number claiming optional and schedule its removal
sound: request char-major-* module aliases for missing OSS devices
chrdev: implement __[un]register_chrdev()
|
|
* topic/snd-printk:
ALSA: Fixed a typo of printk()
ALSA: Add debug module option
ALSA: core - strip too long file names in snd_print*()
|
|
* topic/pcm-drain-nonblock:
ALSA: pcm - Increase protocol version
ALSA: pcm - Fix drain behavior in non-blocking mode
|
|
* topic/misc:
ALSA: Remove unneeded ifdef from sound/core.h
ALSA: Remove struct snd_monitor_file from public sound/core.h
ALSA: Release v1.0.21
|
|
* topic/dummy:
ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
ALSA: dummy - Add debug proc file
ALSA: Add const prefix to proc helper functions
ALSA: Re-export snd_pcm_format_name() function
ALSA: dummy - Fake buffer allocations
ALSA: dummy - Fix the timer calculation in systimer mode
ALSA: dummy - Add more description
ALSA: dummy - Better jiffies handling
ALSA: dummy - Support high-res timer mode
|
|
* topic/dma-sgbuf:
ALSA: Fix SG-buffer DMA with non-coherent architectures
|
|
* topic/asoc: (226 commits)
ASoC: au1x: PSC-AC97 bugfixes
ASoC: Fix WM835x Out4 capture enumeration
ASoC: Remove unuused hw_read_t
ASoC: fix pxa2xx-ac97.c breakage
ASoC: Fully specify DC servo bits to update in wm_hubs
ASoC: Debugged improper setting of PLL fields in WM8580 driver
ASoC: new board driver to connect bfin-5xx with ad1836 codec
ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI
ASoC: davinci: i2c device creation moved into board files
ASoC: Don't reconfigure WM8350 FLL if not needed
ASoC: Fix s3c-i2s-v2 build
ASoC: Make platform data optional for TLV320AIC3x
ASoC: Add S3C24xx dependencies for Simtec machines
ASoC: SDP3430: Fix TWL GPIO6 pin mux request
ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time
ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop
ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI
OMAP: McBSP: Use textual values in DMA operating mode sysfs files
ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510
ASoC: Select core DMA when building for S3C64xx
...
|
|
When new child qdiscs are attached to the mq qdisc, they are actually
attached as root qdiscs to the device queues. The lock selection for
new estimators incorrectly picks the root lock of the existing and
to be replaced qdisc, which results in a use-after-free once the old
qdisc has been destroyed.
Mark mq qdisc instances with a new flag and treat qdiscs attached to
mq as children similar to regular root qdiscs.
Additionally prevent estimators from being attached to the mq qdisc
itself since it only updates its byte and packet counters during dumps.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
|
|
context information.
This patch introduces three new hooks. The inode_getsecctx hook is used to get
all relevant information from an LSM about an inode. The inode_setsecctx is
used to set both the in-core and on-disk state for the inode based on a context
derived from inode_getsecctx.The final hook inode_notifysecctx will notify the
LSM of a change for the in-core state of the inode in question. These hooks are
for use in the labeled NFS code and addresses concerns of how to set security
on an inode in a multi-xattr LSM. For historical reasons Stephen Smalley's
explanation of the reason for these hooks is pasted below.
Quote Stephen Smalley
inode_setsecctx: Change the security context of an inode. Updates the
in core security context managed by the security module and invokes the
fs code as needed (via __vfs_setxattr_noperm) to update any backing
xattrs that represent the context. Example usage: NFS server invokes
this hook to change the security context in its incore inode and on the
backing file system to a value provided by the client on a SETATTR
operation.
inode_notifysecctx: Notify the security module of what the security
context of an inode should be. Initializes the incore security context
managed by the security module for this inode. Example usage: NFS
client invokes this hook to initialize the security context in its
incore inode to the value provided by the server for the file when the
server returned the file's attributes to the client.
Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
hook for inode_setsecctx.
This factors out the part of the vfs_setxattr function that performs the
setting of the xattr and its notification. This is needed so the SELinux
implementation of inode_setsecctx can handle the setting of the xattr while
maintaining the proper separation of layers.
Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Set child_runs_first default to off.
It hurts 'optimal' make -j<NR_CPUS> workloads as make jobs
get preempted by child tasks, reducing parallelism.
Note, this patch might make existing races in user
applications more prominent than before - so breakages
might be bisected to this commit.
Child-runs-first is broken on SMP to begin with, and we
already had it off briefly in v2.6.23 so most of the
offenders ought to be fixed. Would be nice not to revert
this commit but fix those apps finally ...
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1252486344.28645.18.camel@marge.simson.net>
[ made the sysctl independent of CONFIG_SCHED_DEBUG, in case
people want to work around broken apps. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add support for communicating with a Sonics Silicon Backplane through a
SDIO interface, as found in the Nintendo Wii WLAN daughter card.
The Nintendo Wii WLAN card includes a custom Broadcom 4318 chip with
a SDIO host interface.
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
