aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-08-15Merge branch 'release-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6 * 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6: ACPI: Fix thermal shutdowns ACPI: bounds check IRQ to prevent memory corruption ACPI: Avoid bogus EC timeout when EC is in Polling mode ACPI : Add the EC dmi table to fix the incorrect ECDT table ACPI: Properly clear flags on false-positives and send uevent on sudden unplug acpi: trivial cleanups acer-wmi: Fix wireless and bluetooth on early AMW0 v2 laptops ACPI: WMI: Set instance for query block calls ACPICA: Additional error checking for pathname utilities ACPICA: Fix possible memory leak in Unload() operator ACPICA: Fix memory leak when deleting thermal/processor objects
2008-08-15alpha: move include/asm-alpha to arch/alpha/include/asmLinus Torvalds
Sam Ravnborg did the build-test that the direct header file move works, I'm just committing it. This is a pure move: mkdir arch/alpha/include git mv include/asm-alpha arch/alpha/include/asm with no other changes. Requested-and-tested-by: Sam Ravnborg <sam@ravnborg.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15completions: uninline try_wait_for_completion and completion_doneDave Chinner
m68k fails to build with these functions inlined in completion.h. Move them out of line into sched.c and export them to avoid this problem. Signed-off-by: Dave Chinner <david@fromorbit.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15kexec jump: __ftrace_enabled_save/restoreHuang Ying
Add __ftrace_enabled_save/restore, used to disable ftrace for a while. Now, this is used by kexec jump, which need a version without lock, for general situation, a locked version should be used. Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15kexec jump: remove duplication of kexec_restart_prepare()Huang Ying
Call kernel_restart_prepare() in kernel_kexec() instead of duplicating the code. Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15kexec jump: check code size in control pageHuang Ying
Kexec/Kexec-jump require code size in control page is less than PAGE_SIZE/2. This patch add link-time checking for this. ASSERT() of ld link script is used as the link-time checking mechanism. [akpm@linux-foundation.org: build fix] Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15kexec jump: rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZEHuang Ying
Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control page is used for not only code on some platform. For example in kexec jump, it is used for data and stack too. [akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion] Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15suspend: fix section mismatch warning - register_nosave_regionMarcin Slusarz
WARNING: vmlinux.o(.text+0xe684): Section mismatch in reference from the function register_nosave_region() to the function .init.text:__register_nosave_region() The function register_nosave_region() references the function __init __register_nosave_region(). This is often because register_nosave_region lacks a __init annotation or the annotation of __register_nosave_region is wrong. register_nosave_region calls __init function and is called only from __init functions Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15ACPICA: Additional error checking for pathname utilitiesBob Moore
Add error check after all calls to acpi_ns_get_pathname_length. Add status return from acpi_ns_build_external_path and check after all calls. Add parameter validation to acpi_ut_initialize_buffer. Reported by and initial patch by Ingo Molnar. http://lkml.org/lkml/2008/7/21/176 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (47 commits) usb: musb: pass configuration specifics via pdata usb: musb: fix hanging when rmmod gadget driver USB: Add MUSB and TUSB support USB: serial: remove CONFIG_USB_DEBUG from sierra and option drivers USB: Add vendor/product id of ZTE MF628 to option USB: quirk PLL power down mode USB: omap_udc: fix compilation with debug enabled usb: cdc-acm: drain writes on close usb: cdc-acm: stop dropping tx buffers usb: cdc-acm: bugfix release() usb gadget: issue notifications from ACM function usb gadget: remove needless struct members USB: sh: r8a66597-hcd: fix disconnect regression USB: isp1301: fix compilation USB: fix compiler warning fix usb-storage: unusual_devs entry for Nokia 5300 USB: cdc-acm.c: Fix compile warnings USB: BandRich BandLuxe C150/C250 HSPA Data Card Driver USB: ftdi_sio: add support for PHI Fisco data cable (FT232BM based, VID/PID 0403:e40b) usb: isp1760: don't be noisy about short packets. ...
2008-08-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: CRED: Introduce credential access wrappers
2008-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) netns: Fix crash by making igmp per namespace bnx2x: Version update bnx2x: Checkpatch compliance bnx2x: Spelling mistakes bnx2x: Minor code improvements bnx2x: Driver info bnx2x: 1G LED does not turn off bnx2x: 8073 PHY changes bnx2x: Change GPIO for any port bnx2x: Pause settings bnx2x: Link order with external PHY bnx2x: No LRO without Rx checksum bnx2x: Wrong structure size bnx2x: WoL capability bnx2x: Clearing MAC addresses filters bnx2x: Delay in while loops bnx2x: PBA Table Page Alignment Workaround bnx2x: Self-test false positive bnx2x: Memory allocation bnx2x: HW attention lock ...
2008-08-13usb: musb: pass configuration specifics via pdataFelipe Balbi
Use platform_data to pass musb configuration-specific details to musb driver. This patch will prevent that other platforms selecting HAVE_CLK and enabling musb won't break tree building. The other parts of it will come when linux-omap merge up more omap2/3 board-files. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: Add MUSB and TUSB supportFelipe Balbi
This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13usb-serial: don't release unregistered minorsAlan Stern
This patch (as1121) fixes a bug in the USB serial core. When a device is unregistered, the core will give back its minors -- even if the device hasn't been assigned any! The patch reserves the highest minor value (255) to mean that no minor was assigned. It also removes some dead code and does a small style fixup. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: add missing kerneldoc line for "needs_binding"Alan Stern
This patch (as1117) adds a kerneldoc line for the "needs_binding" field in struct usb_interface. It was accidentally omitted when the field was added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-14CRED: Introduce credential access wrappersDavid Howells
The patches that are intended to introduce copy-on-write credentials for 2.6.28 require abstraction of access to some fields of the task structure, particularly for the case of one task accessing another's credentials where RCU will have to be observed. Introduced here are trivial no-op versions of the desired accessors for current and other tasks so that other subsystems can start to be converted over more easily. Wrappers are introduced into a new header (linux/cred.h) for UID/GID, EUID/EGID, SUID/SGID, FSUID/FSGID, cap_effective and current's subscribed user_struct. These wrappers are macros because the ordering between header files mitigates against making them inline functions. linux/cred.h is #included from linux/sched.h. Further, XFS is modified such that it no longer defines and uses parameterised versions of current_fs[ug]id(), thus getting rid of the namespace collision otherwise incurred. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: padlock - fix VIA PadLock instruction usage with irq_ts_save/restore() crypto: hash - Add missing top-level functions crypto: hash - Fix digest size check for digest type crypto: tcrypt - Fix AEAD chunk testing crypto: talitos - Add handling for SEC 3.x treatment of link table
2008-08-13Merge git://oss.sgi.com:8090/xfs/linux-2.6Linus Torvalds
* git://oss.sgi.com:8090/xfs/linux-2.6: (45 commits) [XFS] Fix use after free in xfs_log_done(). [XFS] Make xfs_bmap_*_count_leaves void. [XFS] Use KM_NOFS for debug trace buffers [XFS] use KM_MAYFAIL in xfs_mountfs [XFS] refactor xfs_mount_free [XFS] don't call xfs_freesb from xfs_unmountfs [XFS] xfs_unmountfs should return void [XFS] cleanup xfs_mountfs [XFS] move root inode IRELE into xfs_unmountfs [XFS] stop using file_update_time [XFS] optimize xfs_ichgtime [XFS] update timestamp in xfs_ialloc manually [XFS] remove the sema_t from XFS. [XFS] replace dquot flush semaphore with a completion [XFS] replace inode flush semaphore with a completion [XFS] extend completions to provide XFS object flush requirements [XFS] replace the XFS buf iodone semaphore with a completion [XFS] clean up stale references to semaphores [XFS] use get_unaligned_* helpers [XFS] Fix compile failure in xfs_buf_trace() ...
2008-08-13[h8300] move include/asm-h8300 to arch/h8300/include/asmLinus Torvalds
Done as a script (well, a single "git mv" actually) on request from Yoshinori Sato as a way to avoid a huge diff. Requested-by: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-13crypto: padlock - fix VIA PadLock instruction usage with irq_ts_save/restore()Suresh Siddha
Wolfgang Walter reported this oops on his via C3 using padlock for AES-encryption: ################################################################## BUG: unable to handle kernel NULL pointer dereference at 000001f0 IP: [<c01028c5>] __switch_to+0x30/0x117 *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: Pid: 2071, comm: sleep Not tainted (2.6.26 #11) EIP: 0060:[<c01028c5>] EFLAGS: 00010002 CPU: 0 EIP is at __switch_to+0x30/0x117 EAX: 00000000 EBX: c0493300 ECX: dc48dd00 EDX: c0493300 ESI: dc48dd00 EDI: c0493530 EBP: c04cff8c ESP: c04cff7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process sleep (pid: 2071, ti=c04ce000 task=dc48dd00 task.ti=d2fe6000) Stack: dc48df30 c0493300 00000000 00000000 d2fe7f44 c03b5b43 c04cffc8 00000046 c0131856 0000005a dc472d3c c0493300 c0493470 d983ae00 00002696 00000000 c0239f54 00000000 c04c4000 c04cffd8 c01025fe c04f3740 00049800 c04cffe0 Call Trace: [<c03b5b43>] ? schedule+0x285/0x2ff [<c0131856>] ? pm_qos_requirement+0x3c/0x53 [<c0239f54>] ? acpi_processor_idle+0x0/0x434 [<c01025fe>] ? cpu_idle+0x73/0x7f [<c03a4dcd>] ? rest_init+0x61/0x63 ======================= Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end() around the padlock instructions fix the oops. Suresh wrote: These padlock instructions though don't use/touch SSE registers, but it behaves similar to other SSE instructions. For example, it might cause DNA faults when cr0.ts is set. While this is a spurious DNA trap, it might cause oops with the recent fpu code changes. This is the code sequence that is probably causing this problem: a) new app is getting exec'd and it is somewhere in between start_thread() and flush_old_exec() in the load_xyz_binary() b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is cleared. c) Now we get an interrupt/softirq which starts using these encrypt/decrypt routines in the network stack. This generates a math fault (as cr0.ts is '1') which sets TS_USEDFPU and restores the math that is in the task's xstate. d) Return to exec code path, which does start_thread() which does free_thread_xstate() and sets xstate pointer to NULL while the TS_USEDFPU is still set. e) At the next context switch from the new exec'd task to another task, we have a scenarios where TS_USEDFPU is set but xstate pointer is null. This can cause an oops during unlazy_fpu() in __switch_to() Now: 1) This should happen with or with out pre-emption. Viro also encountered similar problem with out CONFIG_PREEMPT. 2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because kernel_fpu_begin() will manually do a clts() and won't run in to the situation of setting TS_USEDFPU in step "c" above. 3) This was working before the fpu changes, because its a spurious math fault which doesn't corrupt any fpu/sse registers and the task's math state was always in an allocated state. With out the recent lazy fpu allocation changes, while we don't see oops, there is a possible race still present in older kernels(for example, while kernel is using kernel_fpu_begin() in some optimized clear/copy page and an interrupt/softirq happens which uses these padlock instructions generating DNA fault). This is the failing scenario that existed even before the lazy fpu allocation changes: 0. CPU's TS flag is set 1. kernel using FPU in some optimized copy routine and while doing kernel_fpu_begin() takes an interrupt just before doing clts() 2. Takes an interrupt and ipsec uses padlock instruction. And we take a DNA fault as TS flag is still set. 3. We handle the DNA fault and set TS_USEDFPU and clear cr0.ts 4. We complete the padlock routine 5. Go back to step-1, which resumes clts() in kernel_fpu_begin(), finishes the optimized copy routine and does kernel_fpu_end(). At this point, we have cr0.ts again set to '1' but the task's TS_USEFPU is stilll set and not cleared. 6. Now kernel resumes its user operation. And at the next context switch, kernel sees it has do a FP save as TS_USEDFPU is still set and then will do a unlazy_fpu() in __switch_to(). unlazy_fpu() will take a DNA fault, as cr0.ts is '1' and now, because we are in __switch_to(), math_state_restore() will get confused and will restore the next task's FP state and will save it in prev tasks's FP state. Remember, in __switch_to() we are already on the stack of the next task but take a DNA fault for the prev task. This causes the fpu leakage. Fix the padlock instruction usage by calling them inside the context of new routines irq_ts_save/restore(), which clear/restore cr0.ts manually in the interrupt context. This will not generate spurious DNA in the context of the interrupt which will fix the oops encountered and the possible FPU leakage issue. Reported-and-bisected-by: Wolfgang Walter <wolfgang.walter@stwm.de> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13crypto: hash - Add missing top-level functionsHerbert Xu
The top-level functions init/update/final were missing for ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13ipv6: Kill unused ip6_prohibit_entry and ip6_blk_hole_entry declarations.Rami Rosen
This patch removes ip6_prohibit_entry and ip6_blk_hole_entry declarations from include/net/ip6_route.h as they are unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13ipv6: ip6_route.h cleanup.Rami Rosen
This patch removes rt6_lock declaration from include/net/ip6_route.h as it is unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13pkt_sched: Add queue stopped test back to qdisc_run().David S. Miller
Based upon a bug report by Andrew Gallatin on netdev with subject "CPU utilization increased in 2.6.27rc" In commit 37437bb2e1ae8af470dfcd5b4ff454110894ccaf ("pkt_sched: Schedule qdiscs instead of netdev_queue.") the test of the queue being stopped was erroneously removed from qdisc_run(). When the TX queue of the device fills up, this omission causes lots of extraneous useless work to be queued up to softirq context, where we'll just return immediately because the device is still stuffed up. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13[XFS] extend completions to provide XFS object flush requirementsDavid Chinner
XFS object flushing doesn't quite match existing completion semantics. It mixed exclusive access with completion. That is, we need to mark an object as being flushed before flushing it to disk, and then block any other attempt to flush it until the completion occurs. We do this but adding an extra count to the completion before we start using them. However, we still need to determine if there is a completion in progress, and allow no-blocking attempts fo completions to decrement the count. To do this we introduce: int try_wait_for_completion(struct completion *x) returns a failure status if done == 0, otherwise decrements done to zero and returns a "started" status. This is provided to allow counted completions to begin safely while holding object locks in inverted order. int completion_done(struct completion *x) returns 1 if there is no waiter, 0 if there is a waiter (i.e. a completion in progress). This replaces the use of semaphores for providing this exclusion and completion mechanism. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31816a Signed-off-by: David Chinner <david@fromorbit.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-12firmware/memmap: cleanupBernhard Walle
Various cleanup the drivers/firmware/memmap (after review by AKPM): - fix kdoc to conform to the standard - move kdoc from header to implementation files - remove superfluous WARN_ON() after kmalloc() - WARN_ON(x); if (!x) -> if(!WARN_ON(x)) - improve some comments Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12Make ioctl.h compatible with userlandMichael Abbott
The attached patch seems to already exist in a number of branches -- it keeps popping up on Google for me, and is certainly already in Debian -- but is strangely absent from mainstream. The problem appears to be that the patched file ends up as part of the target toolchain, but unfortunately the gcc constant folding doesn't appear to eliminate the __invalid_size_argument_for_IOC value early enough. Certainly compiling C++ programs which use _IO... macros as constants fails without this patch. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12byteorder: add include/linux/byteorder.h to define endian helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12byteorder: add a new include/linux/swab.h to define byteswapping functionsHarvey Harrison
Collect the implementations from include/linux/byteorder/swab.h, swabb.h in swab.h The functionality provided covers: u16 swab16(u16 val) - return a byteswapped 16 bit value u32 swab32(u32 val) - return a byteswapped 32 bit value u64 swab64(u64 val) - return a byteswapped 64 bit value u32 swahw32(u32 val) - return a wordswapped 32 bit value u32 swahb32(u32 val) - return a high/low byteswapped 32 bit value Similar to above, but return swapped value from a naturally-aligned pointer u16 swab16p(u16 *p) u32 swab32p(u32 *p) u64 swab64p(u64 *p) u32 swahw32p(u32 *p) u32 swahb32p(u32 *p) Similar to above, but swap the value in-place (in-situ) void swab16s(u16 *p) void swab32s(u32 *p) void swab64s(u64 *p) void swahw32s(u32 *p) void swahb32s(u32 *p) Arches can override any of these with an optimized version by defining an inline in their asm/byteorder.h (example given for swab16()): u16 __arch_swab16() {} #define __arch_swab16 __arch_swab16 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12seq_file: add seq_cpumask(), seq_nodemask()Alexey Dobriyan
Short enough reads from /proc/irq/*/smp_affinity return -EINVAL for no good reason. This became noticed with NR_CPUS=4096 patches, when length of printed representation of cpumask becase 1152, but cat(1) continued to read with 1024-byte chunks. bitmap_scnprintf() in good faith fills buffer, returns 1023, check returns -EINVAL. Fix it by switching to seq_file, so handler will just fill buffer and doesn't care about offsets, length, filling EOF and all this crap. For that add seq_bitmap(), and wrappers around it -- seq_cpumask() and seq_nodemask(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Paul Jackson <pj@sgi.com> Cc: Mike Travis <travis@sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12move kernel-doc comment for might_sleep directly before its defining blockUwe Kleine-König
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12atmel_lcdfb: add board parameter specify framebuffer memory sizeHaavard Skinnemoen
Specify how much physically continuous, DMA capable memory will be allocated at driver initialization time. This allow to create framebuffer device with larger virtual resolution. Combine with y-panning this can be used to implement double buffering acceleration method. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12matrox maven: convert to a new-style i2c driverJean Delvare
The legacy i2c model is going away soon, so switch to the new model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12radeonfb: fix accel engine hangsDavid Miller
Some chips appear to have the 2D engine hang during screen redraw, typically in a sequence of copyarea operations. This appear to be solved by adding a flush of the engine destination pixel cache and waiting for the engine to be idle before issuing the accel operation. The performance impact seems to be fairly small. Here is a trace on an RV370 (PCI device ID 0x5b64), it records the RBBM_STATUS register, then the source x/y, destination x/y, and width/height used for the copy: ---------------------------------------- radeonfb_prim_copyarea: STATUS[00000140] src[210:70] dst[210:60] wh[a0:10] radeonfb_prim_copyarea: STATUS[00000140] src[2b8:70] dst[2b8:60] wh[88:10] radeonfb_prim_copyarea: STATUS[00000140] src[348:70] dst[348:60] wh[40:10] radeonfb_prim_copyarea: STATUS[80020140] src[390:70] dst[390:60] wh[88:10] radeonfb_prim_copyarea: STATUS[8002613f] src[40:80] dst[40:70] wh[28:10] radeonfb_prim_copyarea: STATUS[80026139] src[a8:80] dst[a8:70] wh[38:10] radeonfb_prim_copyarea: STATUS[80026133] src[e8:80] dst[e8:70] wh[80:10] radeonfb_prim_copyarea: STATUS[8002612d] src[170:80] dst[170:70] wh[30:10] radeonfb_prim_copyarea: STATUS[80026127] src[1a8:80] dst[1a8:70] wh[8:10] radeonfb_prim_copyarea: STATUS[80026121] src[1b8:80] dst[1b8:70] wh[88:10] radeonfb_prim_copyarea: STATUS[8002611b] src[248:80] dst[248:70] wh[68:10] ---------------------------------------- When things are going fine the copies complete before the next ROP is even issued, but all of a sudden the 2D unit becomes active (bit 17 in RBBM_STATUS) and the FIFO retry (bit 13) and FIFO pipeline busy (bit 14) are set as well. The FIFO begins to backup until it becomes full. What happens next is the radeon_fifo_wait() times out, and we access the chip illegally leading to a bus error which usually wedges the box. None of this makes it to the console screen, of course :-) radeon_fifo_wait() should be modified to reset the accelerator when this timeout happens instead of programming the chip anyways. ---------------------------------------- radeonfb: FIFO Timeout ! ERROR(0): Cheetah error trap taken afsr[0010080005000000] afar[000007f900800e40] TL1(0) ERROR(0): TPC[595114] TNPC[595118] O7[459788] TSTATE[11009601] ERROR(0): TPC<radeonfb_copyarea+0xfc/0x248> ERROR(0): M_SYND(0), E_SYND(0), Privileged ERROR(0): Highest priority error (0000080000000000) "Bus error response from system bus" ERROR(0): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] ERROR(0): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000] ERROR(0): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[00\ ERROR(0): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000] ERROR(0): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000] ERROR(0): E-cache idx[800e40] tag[000000000e049f4c] ERROR(0): E-cache data0[fffff8127d300180] data1[00000000004b5384] data2[0000000000000000] data3[0000000000000000] Ker:xnel panic - not syncing: Irrecoverable deferred error trap. ---------------------------------------- Another quirk is that these copyarea calls will not happen until the first drivers/char/vt.c:redraw_screen() occurs. This will only happen if you 1) VC switch or 2) run "consolechars" or 3) unblank the screen. This seems to happen because until a redraw_screen() the screen scrolling method used by fbcon is not finalized yet. I've seen this with other fb drivers too. So if all you do is boot straight into X you will never see this bug on the relevant chips. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12page allocator: use no-panic variant of alloc_bootmem() in ↵Jan Beulich
alloc_large_system_hash() .. since a failed allocation is being (initially) handled gracefully, and panic()-ed upon failure explicitly in the function if retries with smaller sizes failed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: fix spinlock recursion in hvc_console stop_machine: remove unused variable modules: extend initcall_debug functionality to the module loader export virtio_rng.h lguest: use get_user_pages_fast() instead of get_user_pages() mm: Make generic weak get_user_pages_fast and EXPORT_GPL it lguest: don't set MAC address for guest unless specified
2008-08-12Merge branch 'agp-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp: fix SIS 5591/5592 wrong PCI id intel/agp: rewrite GTT on resume agp: use dev_printk when possible amd64-agp: run fallback when no bridges found, not when driver registration fails intel_agp: official name for GM45 chipset
2008-08-12modules: extend initcall_debug functionality to the module loaderArjan van de Ven
The kernel has this really nice facility where if you put "initcall_debug" on the kernel commandline, it'll print which function it's going to execute just before calling an initcall, and then after the call completes it will 1) print if it had an error code 2) checks for a few simple bugs (like leaving irqs off) and 3) print how long the init call took in milliseconds. While trying to optimize the boot speed of my laptop, I have been loving number 3 to figure out what to optimize... ... and then I wished that the same thing was done for module loading. This patch makes the module loader use this exact same functionality; it's a logical extension in my view (since modules are just sort of late binding initcalls anyway) and so far I've found it quite useful in finding where things are too slow in my boot. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-08-12export virtio_rng.hChristian Borntraeger
Hello Rusty, The entropy device was added after we exported all virtio headers. This patch adds virtio_rng.h to the exportable userspace headers. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-08-12mm: Make generic weak get_user_pages_fast and EXPORT_GPL itRusty Russell
Out of line get_user_pages_fast fallback implementation, make it a weak symbol, get rid of CONFIG_HAVE_GET_USER_PAGES_FAST. Export the symbol to modules so lguest can use it. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-08-11skbuff: Code readability NiTGerrit Renker
Inserting a space between the `-' improved the C readability (some languages allow hyphens within functions and variable names, which is confusing). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-12intel/agp: rewrite GTT on resumeKeith Packard
On my Intel chipset (965GM), the GTT is entirely erased across suspend/resume. This patch simply re-plays the current mapping at resume time to restore the table.=20 I noticed this once I started relying on persistent GTT mappings across VT switch in our GEM work -- the old X server and DRM code carefully unbind all memory from the GTT on VT switch, but GEM does not bother. I placed the list management and rewrite code in the generic layer on the assumption that it will be needed on other hardware, but I did not add the rewrite call to anything other than the Intel resume function. Keep a list of current GATT mappings. At resume time, rewrite them into the GATT. This is needed on Intel (at least) as the entire GATT is cleared across suspend/resume. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Keith Packard <keithp@keithp.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-11Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched, cpu hotplug: fix set_cpus_allowed() use in hotplug callbacks sched: fix mysql+oltp regression sched_clock: delay using sched_clock() sched clock: couple local and remote clocks sched clock: simplify __update_sched_clock() sched: eliminate scd->prev_raw sched clock: clean up sched_clock_cpu() sched clock: revert various sched_clock() changes sched: move sched_clock before first use sched: test runtime rather than period in global_rt_runtime() sched: fix SCHED_HRTICK dependency sched: fix warning in hrtick_start_fair()
2008-08-11Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: fix debug_lock_alloc lockdep: increase MAX_LOCKDEP_KEYS generic-ipi: fix stack and rcu interaction bug in smp_call_function_mask() lockdep: fix overflow in the hlock shrinkage code lockdep: rename map_[acquire|release]() => lock_map_[acquire|release]() lockdep: handle chains involving classes defined in modules mm: fix mm_take_all_locks() locking order lockdep: annotate mm_take_all_locks() lockdep: spin_lock_nest_lock() lockdep: lock protection locks lockdep: map_acquire lockdep: shrink held_lock structure lockdep: re-annotate scheduler runqueues lockdep: lock_set_subclass - reset a held lock's subclass lockdep: change scheduler annotation debug_locks: set oops_in_progress if we will log messages. lockdep: fix combinatorial explosion in lock subgraph traversal
2008-08-11Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix 2.6.27rc1 cannot boot more than 8CPUs x86: make "apic" an early_param() on 32-bit, NULL check EFI, x86: fix function prototype x86, pci-calgary: fix function declaration x86: work around gcc 3.4.x bug x86: make "apic" an early_param() on 32-bit x86, debug: tone down arch/x86/kernel/mpparse.c debugging printk x86_64: restore the proper NR_IRQS define so larger systems work. x86: Restore proper vector locking during cpu hotplug x86: Fix broken VMI in 2.6.27-rc.. x86: fdiv bug detection fix
2008-08-12Merge branch 'core/locking' into core/urgentIngo Molnar
2008-08-11Merge branch 'for-linus' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: tc6393 cleanup and update mfd: have TMIO drivers and subdevices depend on ARM mfd: TMIO MMC driver mfd: driver for the TMIO NAND controller mfd: t7l66 MMC platform data mfd: tc6387 MMC platform data mfd: Fix 7l66 and 6387 according to the new mfd-core API mfd: Fix tc6393 according to the new tmio.h mfd: driver for the TC6387XB TMIO controller. mfd: driver for the T7L66XB TMIO SoC mfd: TMIO MMC structures and accessors.
2008-08-11Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Remove include/linux/harrier_defs.h powerpc: Do not ignore arch/powerpc/include powerpc: Delete completed "ppc removal" task from feature removal file powerpc/mm: Fix attribute confusion with htab_bolt_mapping() powerpc/pci: Don't keep ISA memory hole resources in the tree powerpc: Zero fill the return values of rtas argument buffer powerpc/4xx: Update defconfig files for 2.6.27-rc1 powerpc/44x: Incorrect NOR offset in Warp DTS powerpc/44x: Warp DTS changes for board updates powerpc/4xx: Cleanup Warp for i2c driver changes. powerpc/44x: Adjust warp-nand resource end address
2008-08-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Limit VPD length for Broadcom 5708S PCI PM: Export pci_pme_active to drivers PCI: remove duplicate symbol from pci_ids.h PCI: check the return value of device_create_bin_file() in pci_create_bus() PCI: fully restore MSI state at resume time DMA: make dma-coherent.c documentation kdoc-friendly PCI: make pci_register_driver() a macro PCI: add Broadcom 5708S to VPD length quirk
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 12:47:01 +0000