aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2009-05-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: libps2 - better handle bad scheduler decisions Input: usb1400_ts - fix access to "device data" in resume function Input: multitouch - augment event semantics documentation Input: multitouch - add tracking ID to the protocol
2009-05-29memcg: fix deadlock between lock_page_cgroup and mapping tree_lockDaisuke Nishimura
mapping->tree_lock can be acquired from interrupt context. Then, following dead lock can occur. Assume "A" as a page. CPU0: lock_page_cgroup(A) interrupted -> take mapping->tree_lock. CPU1: take mapping->tree_lock -> lock_page_cgroup(A) This patch tries to fix above deadlock by moving memcg's hook to out of mapping->tree_lock. charge/uncharge of pagecache/swapcache is protected by page lock, not tree_lock. After this patch, lock_page_cgroup() is not called under mapping->tree_lock. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29cred: #include init.h in cred.hAlexey Dobriyan
linux/cred.h can't be included as first header (alphabetical order) because it uses __init which is enough to break compilation on some archs. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add support for VGA load detection (pre-945). drm/i915: Use an I2C algo to do the flip to SDVO DDC bus. drm/i915: Determine type before initialising connector drm/i915: Return SDVO LVDS VBT mode if no EDID modes are detected. drm/i915: Fetch SDVO LVDS mode lines from VBT, then reserve them i915: support 8xx desktop cursors drm/i915: allocate large pointer arrays with vmalloc
2009-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt2sas: fix driver version inconsistency [SCSI] 3w-xxxx: scsi_dma_unmap fix [SCSI] 3w-9xxx: scsi_dma_unmap fix [SCSI] ses: fix problems caused by empty SES provided name [SCSI] fc-transport: Close state transition-window during rport deletion. [SCSI] initialize max_target_blocked in scsi_alloc_target [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA
2009-05-23Input: multitouch - add tracking ID to the protocolHenrik Rydberg
There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: via82cxxx: Add VIA VX855 PCI Device ID ide: report timeouts in ide_busy_sleep() ide: improve failed opcode reporting ide: fix printk() levels in ide_dump_ata[pi]_error() ide: fix OOPS during ide-cd error recovery ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)
2009-05-22via82cxxx: Add VIA VX855 PCI Device IDHarald Welte
This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Bruce Chang <BruceChang@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: report timeouts in ide_busy_sleep()Bartlomiej Zolnierkiewicz
* change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void * [ARM] 5517/1: integrator: don't put clock lookups in __initdata [ARM] 5518/1: versatile: don't put clock lookups in __initdata [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF [ARM] Double check memmap is actually valid with a memmap has unexpected holes V2 [ARM] realview: fix broadcast tick support [ARM] realview: remove useless smp_cross_call_done() [ARM] smp: fix cpumask usage in ARM SMP code [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error [ARM] 5509/1: ep93xx: clkdev enable UARTS ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2 ARM: OMAP3: Fix HW SAVEANDRESTORE shift define ARM: OMAP3: Fix number of GPIO lines for 34xx [ARM] S3C: Do not set clk->owner field if unset [ARM] S3C2410: mach-bast.c registering i2c data too early [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c [ARM] S3C64XX: fix GPIO debug [ARM] S3C64XX: GPIO include cleanup [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning [ARM] nwfpe: Add decleration for ExtendedCPDO ...
2009-05-20[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *Alessandro Rubini
The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-19drm/i915: allocate large pointer arrays with vmallocJesse Barnes
For awhile now, many of the GEM code paths have allocated page or object arrays with the slab allocator. This is nice and fast, but won't work well if memory is fragmented, since the slab allocator works with physically contiguous memory (i.e. order > 2 allocations are likely to fail fairly early after booting and doing some work). This patch works around the issue by falling back to vmalloc for >PAGE_SIZE allocations. This is ugly, but much less work than chaining a bunch of pages together by hand (suprisingly there's not a bunch of generic kernel helpers for this yet afaik). vmalloc space is somewhat precious on 32 bit kernels, but our allocations shouldn't be big enough to cause problems, though they're routinely more than a page. Note that this patch doesn't address the unchecked alloc-based-on-ioctl-args in GEM; that needs to be fixed in a separate patch. Also, I've deliberately ignored the DRM's "area" junk. I don't think anyone actually uses it anymore and I'm hoping it gets ripped out soon. [Updated: removed size arg to new free function. We could unify the free functions as well once the DRM mem tracking is ripped out.] fd.o bug #20152 (part 1/3) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-18asm-generic: fix local_add_unless macroRoel Kluin
`local_add_unless(x, y, z)' will be expanded to `(&(x)->y, (y), (x))', but `&(x)->y' should be `&(x)->a' Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-18[ARM] Double check memmap is actually valid with a memmap has unexpected ↵Mel Gorman
holes V2 pfn_valid() is meant to be able to tell if a given PFN has valid memmap associated with it or not. In FLATMEM, it is expected that holes always have valid memmap as long as there is valid PFNs either side of the hole. In SPARSEMEM, it is assumed that a valid section has a memmap for the entire section. However, ARM and maybe other embedded architectures in the future free memmap backing holes to save memory on the assumption the memmap is never used. The page_zone linkages are then broken even though pfn_valid() returns true. A walker of the full memmap must then do this additional check to ensure the memmap they are looking at is sane by making sure the zone and PFN linkages are still valid. This is expensive, but walkers of the full memmap are extremely rare. This was caught before for FLATMEM and hacked around but it hits again for SPARSEMEM because the page_zone linkages can look ok where the PFN linkages are totally screwed. This looks like a hatchet job but the reality is that any clean solution would end up consumning all the memory saved by punching these unexpected holes in the memmap. For example, we tried marking the memmap within the section invalid but the section size exceeds the size of the hole in most cases so pfn_valid() starts returning false where valid memmap exists. Shrinking the size of the section would increase memory consumption offsetting the gains. This patch identifies when an architecture is punching unexpected holes in the memmap that the memory model cannot automatically detect and sets ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx which is the model sub-architecture this has been reported on but may expand later. When set, walkers of the full memmap must call memmap_valid_within() for each PFN and passing in what it expects the page and zone to be for that PFN. If it finds the linkages to be broken, it assumes the memmap is invalid for that PFN. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17reiserfs: fixup perms when xattrs are disabledJeff Mahoney
This adds CONFIG_REISERFS_FS_XATTR protection from reiserfs_permission. This is needed to avoid warnings during file deletions and chowns with xattrs disabled. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-15Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. drm/i915: Set HDMI hot plug interrupt enable for only the output in question. drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS. drm/i915: Use the GM45 VGA hotplug workaround on G45 as well. drm/i915: ignore LVDS on intel graphics systems that lie about having it drm/i915: sanity check IER at wait_request time drm/i915: workaround IGD i2c bus issue in kernel side (v2) drm/i915: Don't allow binding objects into the last page of the aperture. drm/i915: save/restore fence registers across suspend/resume drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
2009-05-15libata: Media rotation rate and form factor heuristicsMartin K. Petersen
This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-15[SCSI] fc-transport: Close state transition-window during rport deletion.Andrew Vasquez
Andrew Vasquez wrote: > fc-transport: Close state transition-window during rport deletion. > > After an rport's state has transitioned to FC_PORTSTATE_BLOCKED, > but, prior to making the upcall to 'block' the scsi-target > associated with an rport, queued commands can recycle and > ultimately run out of retries causing failures to propagate to > upper-level drivers. Close this transition-window by returning > the non-'retries' modifying DID_IMM_RETRY status for submitted > I/Os. The same can happen for iscsi when transitioning from logged in to failed and blocking the sdevs. This patch converts iscsi and fc's transitions back to use DID_IMM_RETRY instead of DID_TRANSPORT_DISRUPTED which has a limited number of retries that we do not want to use for handling this race. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> [Addition of iscsi and fc port online devloss case conversion by Mike Christie] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-15Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "mm: add /proc controls for pdflush threads" viocd: needs to depend on BLOCK block: fix the bio_vec array index out-of-bounds test
2009-05-15Revert "mm: add /proc controls for pdflush threads"Jens Axboe
This reverts commit fafd688e4c0c34da0f3de909881117d374e4c7af. Work is progressing to switch away from pdflush as the process backing for flushing out dirty data. So it seems pointless to add more knobs to control pdflush threads. The original author of the patch did not have any specific use cases for adding the knobs, so we can easily revert this before 2.6.30 to avoid having to maintain this API forever. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-14drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.Carl Worth
This allows userlevel code to discover the pipe number corresponding to a given CRTC ID. This is necessary for doing pipe-specific operations such as waiting for vblank on a given CRTC. Failure to use the right pipe mapping can result in GPU hangs, or at least failure to actually sync to vblank. Signed-off-by: Carl Worth <cworth@cworth.org> [anholt: Style touchups from review] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-12Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dma: fix ipu_idmac.c to not discard the last queued buffer ioatdma: fix "ioatdma frees DMA memory with wrong function" ipu_idmac: Use disable_irq_nosync() from within irq handlers. dmatest: fix max channels handling
2009-05-12ioatdma: fix "ioatdma frees DMA memory with wrong function"Maciej Sosnowski
as reported by Alexander Beregalov <a.beregalov@gmail.com> ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000007f76f800] [size=2000 bytes] [map ped as single] [unmapped as page] The ioatdma driver was unmapping all regions (either allocated as page or single) using unmap_page. This patch lets dma driver recognize if unmap_single or unmap_page should be used. It introduces two new dma control flags: DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE. They should be set to indicate dma driver to do dma-unmapping as single (first one for the source, tha latter for the destination). If respective flag is not set, the driver assumes dma-unmapping as page. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-05-12syscalls.h add the missing sys_pipe2 declarationArnd Bergmann
In order to build the generic syscall table, we need a declaration for every system call. sys_pipe2 was added without a proper declaration, so add this to syscalls.h now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Revert driver core: move platform_data into platform_device Revert driver core: fix passing platform_data Remove old PRINTK_DEBUG config item Doc/sysfs-rules: Swap the order of the words so the sentence makes more sense Driver core: platform: fix kernel-doc warnings
2009-05-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (22 commits) Fix the race between capifs remount and node creation Fix races around the access to ->s_options switch ufs directories to ufs_sync_file() Switch open_exec() and sys_uselib() to do_open_filp() Make open_exec() and sys_uselib() use may_open(), instead of duplicating its parts Reduce path_lookup() abuses Make checkpatch.pl shut up on fs/inode.c NULL noise in fs/super.c:kill_bdev_super() romfs: cleanup romfs_fs.h ROMFS: romfs_dev_read() error ignored fs: dcache fix LRU ordering ocfs2: Use nd_set_link(). Fix deadlock in ipathfs ->get_sb() Fix a leak in failure exit in 9p ->get_sb() Convert obvious places to deactivate_locked_super() New helper: deactivate_locked_super() reiserfs: remove privroot hiding in lookup reiserfs: dont associate security.* with xattr files reiserfs: fixup xattr_root caching Always lookup priv_root on reiserfs mount and keep it ...
2009-05-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix line-in on Mac Mini Core2 Duo ALSA: Release v1.0.20 sound: via82xx: fix DXS volume range sound: serial-u16550: fix buffer overflow ASoC: Fix errors in WM8990
2009-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) bonding: fix panic if initialization fails IXP4xx: complete Ethernet netdev setup before calling register_netdev(). IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization. ipvs: Fix IPv4 FWMARK virtual services ipv4: Make INET_LRO a bool instead of tristate. net: remove stale reference to fastroute from Kconfig help text net: update skb_recycle_check() for hardware timestamping changes bnx2: Fix panic in bnx2_poll_work(). net-sched: fix bfifo default limit igb: resolve panic on shutdown when SR-IOV is enabled wimax: oops: wimax_dev_add() is the only one that can initialize the state wimax: fix oops if netlink fails to add attribute Bluetooth: Move dev_set_name() to a context that can sleep netfilter: ctnetlink: fix wrong message type in user updates netfilter: xt_cluster: fix use of cluster match with 32 nodes netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE netfilter: add missing linux/types.h include to xt_LED.h mac80211: pid, fix memory corruption mac80211: minstrel, fix memory corruption cfg80211: fix comment on regulatory hint processing ...
2009-05-10Merge branch 'topic/misc' into for-linusTakashi Iwai
* topic/misc: ALSA: Release v1.0.20
2009-05-09Fix races around the access to ->s_optionsAl Viro
Put generic_show_options read access to s_options under rcu_read_lock, split save_mount_options() into "we are setting it the first time" (uses in foo_fill_super()) and "we are relacing and freeing the old one", synchronize_rcu() before kfree() in the latter. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09Switch open_exec() and sys_uselib() to do_open_filp()Al Viro
... and make path_lookup_open() static Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09romfs: cleanup romfs_fs.hChristoph Hellwig
There's no kernel-only content in it anymore, so move it to header-y and remove the superflous #ifdef __KERNEL__. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09New helper: deactivate_locked_super()Al Viro
Does equivalent of up_write(&s->s_umount); deactivate_super(s); However, it does not does not unlock it until it's all over. As the result, it's safe to use to dispose of new superblock on ->get_sb() failure exits - nobody will see the sucker until it's all over. Equivalent using up_write/deactivate_super is safe for that purpose if superblock is either safe to use or has NULL ->s_root when we unlock. Normally filesystems take the required precautions, but a) we do have bugs in that area in some of them. b) up_write/deactivate_super sequence is extremely common, so the helper makes sense anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09reiserfs: remove privroot hiding in lookupJeff Mahoney
With Al Viro's patch to move privroot lookup to fs mount, there's no need to have special code to hide the privroot in reiserfs_lookup. I've also cleaned up the privroot hiding in reiserfs_readdir_dentry and removed the last user of reiserfs_xattrs(). Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09reiserfs: fixup xattr_root cachingJeff Mahoney
The xattr_root caching was broken from my previous patch set. It wouldn't cause corruption, but could cause decreased performance due to allocating a larger chunk of the journal (~ 27 blocks) than it would actually use. This patch loads the xattr root dentry at xattr initialization and creates it on-demand. Since we're using the cached dentry, there's no point in keeping lookup_or_create_dir around, so that's removed. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09Always lookup priv_root on reiserfs mount and keep itAl Viro
... even if it's a negative dentry. That way we can set ->d_op on root before anyone could race with us. Simplify d_compare(), while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-08Revert driver core: move platform_data into platform_deviceGreg Kroah-Hartman
This reverts commit 006f4571a15fae3a0575f2a0f9e9b63b3d1012f8: This patch moves platform_data from struct device into struct platform_device, based on the two ideas: 1. Now all platform_driver is registered by platform_driver_register, which makes probe()/release()/... of platform_driver passed parameter of platform_device *, so platform driver can get platform_data from platform_device; 2. Other kind of devices do not need to use platform_data, we can decrease size of device if moving it to platform_device. Taking into consideration of thousands of files to be fixed and they can't be finished in one night(maybe it will take a long time), so we keep platform_data in device to allow two kind of cases coexist until all platform devices pass its platfrom data from platform_device->platform_data. All patches to do this kind of conversion are welcome. As we don't really want to do it, it was a bad idea. Cc: David Brownell <david-b@pacbell.net> Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (32 commits) [CIFS] Fix double list addition in cifs posix open code [CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp [CIFS] Fix SMB uid in NTLMSSP authenticate request [CIFS] NTLMSSP reenabled after move from connect.c to sess.c [CIFS] Remove sparse warning [CIFS] remove checkpatch warning [CIFS] Fix final user of old string conversion code [CIFS] remove cifs_strfromUCS_le [CIFS] NTLMSSP support moving into new file, old dead code removed [CIFS] Fix endian conversion of vcnum field [CIFS] Remove trailing whitespace [CIFS] Remove sparse endian warnings [CIFS] Add remaining ntlmssp flags and standardize field names [CIFS] Fix build warning cifs: fix length handling in cifs_get_name_from_search_buf [CIFS] Remove unneeded QuerySymlink call and fix mapping for unmapped status [CIFS] rename cifs_strndup to cifs_strndup_from_ucs Added loop check when mounting DFS tree. Enable dfs submounts to handle remote referrals. [CIFS] Remove older session setup implementation ...
2009-05-06Eliminate thousands of warnings with gcc 3.2 buildAndi Kleen
When building with gcc 3.2 I get thousands of warnings such as include/linux/gfp.h: In function `allocflags_to_migratetype': include/linux/gfp.h:105: warning: null format string due to passing a NULL format string to warn_slowpath() in #define __WARN() warn_slowpath(__FILE__, __LINE__, NULL) Split this case out into a separate call. This also shrinks the kernel slightly: text data bss dec hex filename 4802274 707668 712704 6222646 5ef336 vmlinux text data bss dec hex filename 4799027 703572 712704 6215303 5ed687 vmlinux due to removeing one argument from the commonly-called __WARN(). [akpm@linux-foundation.org: reduce scope of `empty'] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-06ALSA: Release v1.0.20Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2009-05-05netfilter: xt_cluster: fix use of cluster match with 32 nodesPablo Neira Ayuso
This patch fixes a problem when you use 32 nodes in the cluster match: % iptables -I PREROUTING -t mangle -i eth0 -m cluster \ --cluster-total-nodes 32 --cluster-local-node 32 \ --cluster-hash-seed 0xdeadbeef -j MARK --set-mark 0xffff iptables: Invalid argument. Run `dmesg' for more information. % dmesg | tail -1 xt_cluster: this node mask cannot be higher than the total number of nodes The problem is related to this checking: if (info->node_mask >= (1 << info->total_nodes)) { printk(KERN_ERR "xt_cluster: this node mask cannot be " "higher than the total number of nodes\n"); return false; } (1 << 32) is 1. Thus, the checking fails. BTW, I said this before but I insist: I have only tested the cluster match with 2 nodes getting ~45% extra performance in an active-active setup. The maximum limit of 32 nodes is still completely arbitrary. I'd really appreciate if people that have more nodes in their setups let me know. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) e1000: fix virtualization bug bonding: fix alb mode locking regression Bluetooth: Fix issue with sysfs handling for connections usbnet: CDC EEM support (v5) tcp: Fix tcp_prequeue() to get correct rto_min value ehea: fix invalid pointer access ne2k-pci: Do not register device until initialized. Subject: [PATCH] br2684: restore net_dev initialization net: Only store high 16 bits of kernel generated filter priorities virtio_net: Fix function name typo virtio_net: Cleanup command queue scatterlist usage bonding: correct the cleanup in bond_create() virtio: add missing include to virtio_net.h smsc95xx: add support for LAN9512 and LAN9514 smsc95xx: configure LED outputs netconsole: take care of NETDEV_UNREGISTER event xt_socket: checks for the state of nf_conntrack bonding: bond_slave_info_query() fix cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’ netfilter: use likely() in xt_info_rdlock_bh() ...
2009-05-05netfilter: add missing linux/types.h include to xt_LED.hPatrick McHardy
Pointed out by Dave Miller: CHECK include/linux/netfilter (57 files) /home/davem/src/GIT/net-2.6/usr/include/linux/netfilter/xt_LED.h:6: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-04Bluetooth: Fix issue with sysfs handling for connectionsMarcel Holtmann
Due to a semantic changes in flush_workqueue() the current approach of synchronizing the sysfs handling for connections doesn't work anymore. The whole approach is actually fully broken and based on assumptions that are no longer valid. With the introduction of Simple Pairing support, the creation of low-level ACL links got changed. This change invalidates the reason why in the past two independent work queues have been used for adding/removing sysfs devices. The adding of the actual sysfs device is now postponed until the host controller successfully assigns an unique handle to that link. So the real synchronization happens inside the controller and not the host. The only left-over problem is that some internals of the sysfs device handling are not initialized ahead of time. This leaves potential access to invalid data and can cause various NULL pointer dereferences. To fix this a new function makes sure that all sysfs details are initialized when an connection attempt is made. The actual sysfs device is only registered when the connection has been successfully established. To avoid a race condition with the registration, the check if a device is registered has been moved into the removal work. As an extra protection two flush_work() calls are left in place to make sure a previous add/del work has been completed first. Based on a report by Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Roger Quadros <ext-roger.quadros@nokia.com> Tested-by: Marc Pignat <marc.pignat@hevs.ch>
2009-05-04usbnet: CDC EEM support (v5)Omar Laazimani
This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: Omar Laazimani <omar.oberthur@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-04tcp: Fix tcp_prequeue() to get correct rto_min valueSatoru SATOH
tcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of the actual value might be tuned. The following patches fix this and make tcp_prequeue get the actual value returns from tcp_rto_min(). Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01virtio: add missing include to virtio_net.hGrant Likely
virtio_net.h uses the macro ETH_ALEN which is defined in linux/if_ether.h. Discovered when hacking on virtio-over-pci patches. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01netfilter: use likely() in xt_info_rdlock_bh()Eric Dumazet
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-30ide-cd: fix REQ_QUIET tests in cdrom_decode_statusBorislav Petkov
Original patch (dfa4411cc3a690011cab90e9a536938795366cf9) was buggy. This is a more proper fix which introduces blk_rq_quiet() macro alleviating the need for dumb, too short caching variables. Thanks to Helge Deller and Bart for debugging this. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reported-and-tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>