aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2005-12-27[IPV6] mcast: Fix multiple issues in MLDv2 reports.David L Stevens
The below "jumbo" patch fixes the following problems in MLDv2. 1) Add necessary "ntohs" to recent "pskb_may_pull" check [breaks all nonzero source queries on little-endian (!)] 2) Add locking to source filter list [resend of prior patch] 3) fix "mld_marksources()" to a) send nothing when all queried sources are excluded b) send full exclude report when source queried sources are not excluded c) don't schedule a timer when there's nothing to report NOTE: RFC 3810 specifies the source list should be saved and each source reported individually as an IS_IN. This is an obvious DOS path, requiring the host to store and then multicast as many sources as are queried (e.g., millions...). This alternative sends a full, relevant report that's limited to number of sources present on the machine. 4) fix "add_grec()" to send empty-source records when it should The original check doesn't account for a non-empty source list with all sources inactive; the new code keeps that short-circuit case, and also generates the group header with an empty list if needed. 5) fix mca_crcount decrement to be after add_grec(), which needs its original value These issues (other than item #1 ;-) ) were all found by Yan Zheng, much thanks! Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-24[PATCH] n_r3964: fixed usage of HZ; removed bad includeKurt Huwig
Fix n_r3964 timeouts (hardcoded for 100Hz) Also the include of <asm/termios.h> in 'n_r3964.h' is unnecessary and prevents using the header file in any application that has to include <termios.h> due to duplicate definition of 'struct termio'. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-24[PATCH] Fix typo in x86_64 __build_write_lock_const assemblyBen Collins
Based on __build_read_lock_const, this looked like a bug. [ Indeed. Maybe nobody uses this version? Worth fixing up anyway ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-24[PATCH] x86_64/ia64 : Fix compilation error for node_to_first_cpuRavikiran G Thirumalai
Fixes a compiler error in node_to_first_cpu, __ffs expects unsigned long as a parameter; instead cpumask_t was being passed. The macro node_to_first_cpu was not yet used in x86_64 and ia64 arches, and so we never hit this. This patch replaces __ffs with first_cpu macro, similar to other arches. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran G Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-22Pull owner_id into release branchLen Brown
2005-12-22Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-12-22[PATCH] fix race with preempt_enable()Nicolas Pitre
Currently a simple void foo(void) { preempt_enable(); } produces the following code on ARM: foo: bic r3, sp, #8128 bic r3, r3, #63 ldr r2, [r3, #4] ldr r1, [r3, #0] sub r2, r2, #1 tst r1, #4 str r2, [r3, #4] blne preempt_schedule mov pc, lr The problem is that the TIF_NEED_RESCHED flag is loaded _before_ the preemption count is stored back, hence any interrupt coming within that 3 instruction window causing TIF_NEED_RESCHED to be set won't be seen and scheduling won't happen as it should. Nothing currently prevents gcc from performing that reordering. There is already a barrier() before the decrement of the preemption count, but another one is needed between this and the TIF_NEED_RESCHED flag test for proper code ordering. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-22Merge git://git.skbuff.net/gitroot/yoshfuji/linux-2.6.14+git+ipv6-fix-20051221aDavid S. Miller
2005-12-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2005-12-21[PATCH] include/linux/irq.h: #include <linux/smp.h>Adrian Bunk
Jan's crosscompile page [1] shows, that one regression in 2.6.15-rc is that the v850 defconfig does no longer compile. The compile error is: <-- snip --> ... CC arch/v850/kernel/setup.o In file included from /usr/src/ctest/rc/kernel/arch/v850/kernel/setup.c:17: /usr/src/ctest/rc/kernel/include/linux/irq.h:13:43: asm/smp.h: No such file or directory make[2]: *** [arch/v850/kernel/setup.o] Error 1 <-- snip --> The #include <asm/smp.h> in irq.h was intruduced in 2.6.15-rc. Since include/linux/irq.h needs code from asm/smp.h only in the CONFIG_SMP=y case and linux/smp.h #include's asm/smp.h only in the CONFIG_SMP=y case, I'm suggesting this patch to #include <linux/smp.h> in irq.h. I've tested the compilation with both CONFIG_SMP=y and CONFIG_SMP=n on i386. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21[IPV6]: Defer IPv6 device initialization until the link becomes ready.YOSHIFUJI Hideaki
NETDEV_UP might be sent even if the link attached to the interface was not ready. DAD does not make sense in such case, so we won't do so. After interface Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21[IPV6]: Flag RTF_ANYCAST for anycast routes.YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21[ACPI] increase owner_id limit to 64 from 32Alex Williamson
This is an interim patch until changes in an updated ACPICA core increase the limit to 255. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-20[PATCH] relayfs: remove warning printk() in relay_switch_subbuf()Tom Zanussi
There's currently a diagnostic printk in relay_switch_subbuf() meant as a warning if you accidentally try to log an event larger than the sub-buffer size. The problem is if this happens while logging from somewhere it's not safe to be doing printks, such as in the scheduler, you can end up with a deadlock. This patch removes the warning from relay_switch_subbuf() and instead prints some diagnostic info when the channel is closed. Thanks to Mathieu Desnoyers for pointing out the problem and suggesting a fix. Signed-off-by: Tom Zanussi <zanussi@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-19NFS: Fix another O_DIRECT raceTrond Myklebust
Ensure we call unmap_mapping_range() and sync dirty pages to disk before doing an NFS direct write. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19[IPSEC]: Perform SA switchover immediately.David S. Miller
When we insert a new xfrm_state which potentially subsumes an existing one, make sure all cached bundles are flushed so that the new SA is used immediately. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[RTNETLINK]: Fix RTNLGRP definitions in rtnetlink.hKristian Slavov
I reported a problem and gave hints to the solution, but nobody seemed to react. So I prepared a patch against 2.6.14.4. Tested on 2.6.14.4 with "ip monitor addr" and with the program attached, while adding and removing IPv6 address. Both programs didn't receive any messages. Tested 2.6.14.4 + this patch, and both programs received add and remove messages. Signed-off-by: Kristian Slavov <kristian.slavov@nomadiclab.com> Acked-by: Jamal Hadi salim <hadi@cyberus.ca> ACKed-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-18[PATCH] mtd onenand driver: reduce stack usageKyungmin Park
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18[PATCH] mtd onenand driver: check correct manufacturerKyungmin Park
This (and the three subsequent patches) is working well on OMAP H4 with 2.6.15-rc4 kernel and passes the LTP fs test. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-12-16[PATCH] ppc: ppc4xx_dma DMA_MODE_{READ,WRITE} fixAl Viro
DMA_MODE_{READ,WRITE} are declared in asm-powerpc/dma.h and their declarations there match the definitions. Old declarations in ppc4xx_dma.h are not right anymore (wrong type, to start with). Killed them, added include of asm/dma.h where needed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16[IA64] Add __read_mostly support for IA64Christoph Lameter
sparc64, i386 and x86_64 have support for a special data section dedicated to rarely updated data that is frequently read. The section was created to avoid false sharing of those rarely read data with frequently written kernel data. This patch creates such a data section for ia64 and will group rarely written data into this section. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-16Make sure we copy pages inserted with "vm_insert_page()" on forkLinus Torvalds
The logic that decides that a fork() might be able to avoid copying a VM area when it can be re-created by page faults didn't know about the new vm_insert_page() case. Also make some things a bit more anal wrt VM_PFNMAP. Pointed out by Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16[IA64] disable preemption in udelay()John Hawkes
The udelay() inline for ia64 uses the ITC. If CONFIG_PREEMPT is enabled and the platform has unsynchronized ITCs and the calling task migrates to another CPU while doing the udelay loop, then the effective delay may be too short or very, very long. This patch disables preemption around 100 usec chunks of the overall desired udelay time. This minimizes preemption-holdoffs. udelay() is now too big to be inline, move it out of line and export it. Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-15[SCSI] fix for fc transport recursion problem.James.Smart@Emulex.Com
In the scenario that a link was broken, the devloss timer for each rport was expire at roughly the same time, causing lots of "delete" workqueue items being queued. Depth is dependent upon the number of rports that were on the link. The rport target remove calls were calling flush_scheduled_work(), which would interrupt the stream, and start the next workqueue item, which did the same thing, and so on until recursion depth was large. This fix stops the recursion in the initial delete path, and pushes it off to a host-level work item that reaps the dead rports. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15[PATCH] sun4c_memerr_reg __iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-15[PATCH] fix iomem annotations in sparc32 pcic codeAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-14Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
2005-12-14Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2005-12-15[PATCH] ide: cleanup ide_driver_tBartlomiej Zolnierkiewicz
Remove unused fields: ioctl, ata[pi]_prebuilder. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] ide: cleanup ide.hBartlomiej Zolnierkiewicz
Remove: * stale comment * unused HOST() macro * unused ata_{error,control}_t types * unused atapi_select_t type * ide_init_subdrivers() prototype Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] ide: AU1200 IDE updateJordan Crouse
Changes here include removing all of CONFIG_PM while it is being repeatedly smacked with a lead pipe, moving the BURSTMODE param to a #define (it should be defined almost always anyway), fixing the rqsize stuff, pulling ide_ioreg_t, and general cleanups and whatnot. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] ide: core modifications for AU1200Jordan Crouse
bart: slightly modified by me Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-15[PATCH] via82cxxx IDE: Add VT8251 ISA bridgeDaniel Drake
Some motherboards (such as the Asus P5V800-MX) ship a PCI_DEVICE_ID_VIA_82C586_1 IDE controller alongside a VT8251 southbridge. This southbridge is currently unrecognised in the via82cxxx IDE driver, preventing those users from getting DMA access to disks. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-12-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-12-14[ARM] 3205/1: Handle new EABI relocations when loading kernel modules.Daniel Jacobowitz
Patch from Daniel Jacobowitz Handle new EABI relocations when loading kernel modules. This is necessary for CONFIG_AEABI kernels, and also for some broken (since fixed) old ABI toolchains. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-13[SCSI] Consolidate REQ_BLOCK_PC handling path (fix ipod panic)James Bottomley
This follows on from Jens' patch and consolidates all of the ULD separate handlers for REQ_BLOCK_PC into a single call which has his fix for our direction bug. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[IA64] Split 16-bit severity field in sal_log_record_headerTony Luck
ERR_SEVERITY item is defined as a 8 bits item in SAL documentation ($B.2.1 rev december 2003), but as an u16 in sal.h. This has the side effect that current code in mca.c may not call ia64_sal_clear_state_info() upon receiving corrected platform errors if there are bits set in the validation byte. Reported by Xavier Bru. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-13[libata] mark certain hardware (or drivers) with a no-atapi flagJeff Garzik
Some hardware does not support the PACKET command at all. Other hardware supports ATAPI, but the driver does something nasty such as calling BUG() when an ATAPI command is issued. For these such cases, we mark them with a new flag, ATA_FLAG_NO_ATAPI. Initial version contributed by Ben Collins.
2005-12-12[PATCH] fbdev: Fix incorrect unaligned access in little-endian machinesAntonino A. Daplas
The drawing function cfbfillrect does not work correctly when access is not unsigned-long aligned. It manifests as extra lines of pixels that are not complete drawn. Reversing the shift operator solves the problem, so I would presume that this bug would manifest only on little endian machines. The function cfbcopyarea may also have this bug. Aligned access should present no problems. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] fbdev: fix switch to KD_TEXT, enhanced versionKnut Petersen
Every framebuffer driver relies on the assumption that the set_par() function of the driver is called before drawing functions and other functions dependent on the hardware state are executed. Whenever you switch from X to a framebuffer console for the very first time, there is a chance that a broken X system has _not_ set the mode to KD_GRAPHICS, thus the vt and framebuffer code executes a screen redraw and several other functions before a set_par() is executed. This is believed to be not a bug of linux but a bug of X/xdm. At least some X releases used by SuSE and Debian show this behaviour. There was a 2nd case, but that has been fixed by Antonino Daplas on 10-dec-2005. This patch allows drivers to set a flag to inform fbcon_switch() that they prefer a set_par() call on every console switch, working around the problems caused by the broken X releases. The flag will be used by the next release of cyblafb and might help other drivers that assume a hardware state different to the one used by X. As the default behaviour does not change, this patch should be acceptable to everybody. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] fbcon: Add ability to save/restore graphics stateAntonino A. Daplas
Add hooks to save and restore the graphics state. These hooks are called in fbcon_blank() when entering/leaving KD_GRAPHICS mode. This is needed by savagefb at least so it can cooperate with savage_dri and by cyblafb. State save/restoration can be full or partial. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-12-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-12-12[PATCH] broken cast in parport_pcDave Jones
Spotted by a Fedora user. Compiling with DEBUG_PARPORT set fails due to the broken cast. Just remove it. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] kprobes: increment kprobe missed count for multiprobesKeshavamurthy Anil S
When multiple probes are registered at the same address and if due to some recursion (probe getting triggered within a probe handler), we skip calling pre_handlers and just increment nmissed field. The below patch make sure it walks the list for multiple probes case. Without the below patch we get incorrect results of nmissed count for multiple probe case. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] kprobes: no probes on critical pathKeshavamurthy Anil S
For Kprobes critical path is the path from debug break exception handler till the control reaches kprobes exception code. No probes can be supported in this path as we will end up in recursion. This patch prevents this by moving the below function to safe __kprobes section onto which no probes can be inserted. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] V4L/DVB: (3151) I2C ID renamed to I2C_DRIVERID_INFRAREDMauro Carvalho Chehab
I2C ID renamed to I2C_DRIVERID_INFRARED Acked-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 4Mauro Carvalho Chehab
Clean up whitespaces at v4l/dvb files Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 3Mauro Carvalho Chehab
Clean up whitespaces at v4l/dvb files Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>