aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-10-12V4L/DVB (8634): v4l2: extend MPEG Encoding API with AVC and AACJanne Grunau
Adds Advanced Audio Coding (AAC) and MPEG-4 Advanced Video Coding (AVC/H.264) as audio/video codecs to the extended controls API. Updates cx2341x driver to the new values. Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FMMauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-10-12V4L/DVB (8626): Add support for TCL tuner MF02GIP-5N-EMauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8625): saa7134: Add NEC prococol IR decoding capabilityMauro Carvalho Chehab
This patch adds the capability of decoding NEC protocol, received via GPIO18 line. This GPIO port can trigger saa7134 IRQ. A future improvement would be to make it a little more generic to work also with GPIO16 line. A pure IRQ code didn't work, since some delays were introduced on the tests we did. A possible approach would be to use polling at a rate of 2.5 ms or less. If a new code were taken, a code similar to nec_task() could be used. However, this would add an extra overhead to kernel, and will consume more power. Due to that, we took an hybrid approach: an IRQ upper half to trigger when a new key is received and a bottom half to convert pulse-distance into a keycode. The bottom half is polling based, to improve performance. During the bottom half proccess, GPIO18 IRQ line is disabled, preventing IRQ reentrancy and improving performance a little bit. Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits) ext4: Rename ext4dev to ext4 ext4: Avoid double dirtying of super block in ext4_put_super() Update ext4 MAINTAINERS file Hook ext4 to the vfs fiemap interface. generic block based fiemap implementation ocfs2: fiemap support vfs: vfs-level fiemap interface ext4: fix xattr deadlock jbd2: Fix buffer head leak when writing the commit block ext4: Add debugging markers that can be used by systemtap jbd2: abort instead of waiting for nonexistent transaction ext4: fix initialization of UNINIT bitmap blocks ext4: Remove old legacy block allocator ext4: Use readahead when reading an inode from the inode table ext4: Improve the documentation for ext4's /proc tunables ext4: Combine proc file handling into a single set of functions ext4: move /proc setup and teardown out of mballoc.c ext4: Don't use 'struct dentry' for internal lookups ext4/jbd2: Avoid WARN() messages when failing to write to the superblock ext4: use percpu data structures for lg_prealloc_list ...
2008-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (71 commits) ide: Remove ide_spin_wait_hwgroup() and use special requests instead ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h> ide: add ide_do_test_unit_ready() helper ide: add ide_do_start_stop() helper ide: add ide_set_media_lock() helper ide-floppy: move floppy ioctls handling to ide-floppy_ioctl.c ide-floppy: ->{srfp,wp} -> IDE_AFLAG_{SRFP,WP} ide: add ide_queue_pc_tail() helper ide: add ide_queue_pc_head() helper ide: add ide_init_pc() helper ide-tape: add ide_tape_set_media_lock() helper ide-floppy: add ide_floppy_set_media_lock() helper ide: add ide_io_buffers() helper ide-scsi: cleanup ide_scsi_io_buffers() ide-floppy: remove MODE_SENSE_* defines ide-{floppy,tape}: remove packet command stack ide-{floppy,tape}: remove request stack ide-generic: handle probing of legacy io-ports v5 ide-floppy: use scatterlists for pio transfers ide-tape: remove idetape_init_rq() ...
2008-10-11Merge phase #4 (X2APIC, APIC unification, CPU identification unification) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-v28-for-linus-phase4-D' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (186 commits) x86, debug: print more information about unknown CPUs x86 setup: handle more than 8 CPU flag words x86: cpuid, fix typo x86: move transmeta cap read to early_init_transmeta() x86: identify_cpu_without_cpuid v2 x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo x86: move VMX MSRs to msr-index.h x86: centaur_64.c remove duplicated setting of CONSTANT_TSC x86: intel.c put workaround for old cpus together x86: let intel 64-bit use intel.c x86: make intel_64.c the same as intel.c x86: make intel.c have 64-bit support code x86: little clean up of intel.c/intel_64.c x86: make 64 bit to use amd.c x86: make amd_64 have 32 bit code x86: make amd.c have 64bit support code x86: merge header in amd_64.c x86: add srat_detect_node for amd64 x86: remove duplicated force_mwait x86: cpu make amd.c more like amd_64.c v2 ...
2008-10-11Merge branch 'x86/unify-cpu-detect' into x86-v28-for-linus-phase4-DIngo Molnar
Conflicts: arch/x86/kernel/cpu/common.c arch/x86/kernel/signal_64.c include/asm-x86/cpufeature.h
2008-10-11Merge branch 'x86/apic' into x86-v28-for-linus-phase4-BIngo Molnar
Conflicts: arch/x86/kernel/apic_32.c arch/x86/kernel/apic_64.c arch/x86/kernel/setup.c drivers/pci/intel-iommu.c include/asm-x86/cpufeature.h include/asm-x86/dma-mapping.h
2008-10-11Merge phase #3 (IOMMU) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-v28-for-linus-phase3-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits) AMD IOMMU: use iommu_device_max_index, fix AMD IOMMU: use iommu_device_max_index x86: add PCI IDs for AMD Barcelona PCI devices x86/iommu: use __GFP_ZERO instead of memset for GART x86/iommu: convert GART need_flush to bool x86/iommu: make GART driver checkpatch clean x86 gart: remove unnecessary initialization x86: restore old GART alloc_coherent behavior revert "x86: make GART to respect device's dma_mask about virtual mappings" x86: export pci-nommu's alloc_coherent iommu: remove fullflush and nofullflush in IOMMU generic option x86: remove set_bit_string() iommu: export iommu_area_reserve helper function AMD IOMMU: use coherent_dma_mask in alloc_coherent add AMD IOMMU tree to MAINTAINERS file AMD IOMMU: use cmd_buf_size when freeing the command buffer AMD IOMMU: calculate IVHD size with a function AMD IOMMU: remove unnecessary cast to u64 in the init code AMD IOMMU: free domain bitmap with its allocation order AMD IOMMU: simplify dma_mask_to_pages ...
2008-10-11Merge phase #2 (PAT updates) of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-v28-for-linus-phase2-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) x86, cpa: make the kernel physical mapping initialization a two pass sequence, fix x86, pat: cleanups x86: fix pagetable init 64-bit breakage x86: track memtype for RAM in page struct x86, cpa: srlz cpa(), global flush tlb after splitting big page and before doing cpa x86, cpa: remove cpa pool code x86, cpa: no need to check alias for __set_pages_p/__set_pages_np x86, cpa: dont use large pages for kernel identity mapping with DEBUG_PAGEALLOC x86, cpa: make the kernel physical mapping initialization a two pass sequence x86, cpa: remove USER permission from the very early identity mapping attribute x86, cpa: rename PTE attribute macros for kernel direct mapping in early boot x86: make sure the CPA test code's use of _PAGE_UNUSED1 is obvious linux-next: fix x86 tree build failure x86: have set_memory_array_{uc,wb} coalesce memtypes, fix agp: enable optimized agp_alloc_pages methods x86: have set_memory_array_{uc,wb} coalesce memtypes. x86: {reverve,free}_memtype() take a physical address x86: fix pageattr-test agp: add agp_generic_destroy_pages() agp: generic_alloc_pages() ...
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-11net: fix dummy 'nf_conntrack_event_cache()'Linus Torvalds
The dummy version of 'nf_conntrack_event_cache()' (used when the NF_CONNTRACK_EVENTS config option is not enabled) had not been updated when the calling convention changed. This was introduced by commit a71996fccce4b2086a26036aa3c915365ca36926 ("netfilter: netns nf_conntrack: pass conntrack to nf_conntrack_event_cache() not skb") Tssk. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits) myri10ge: update driver version number to 1.4.3-1.369 r8169: add shutdown handler r8169: preliminary 8168d support r8169: support additional 8168cp chipset r8169: change default behavior for mildly identified 8168c chipsets r8169: add a new 8168cp flavor r8169: add a new 8168c flavor (bis) r8169: add a new 8168c flavor r8169: sync existing 8168 device hardware start sequences with vendor driver r8169: 8168b Tx performance tweak r8169: make room for more specific 8168 hardware start procedure r8169: shuffle some registers handling around (8168 operation only) r8169: new phy init parameters for the 8168b r8169: update phy init parameters r8169: wake up the PHY of the 8168 af_key: fix SADB_X_SPDDELETE response ath9k: Fix return code when ath9k_hw_setpower() fails on reset ath9k: remove nasty FAIL macro from ath9k_hw_reset() gre: minor cleanups in netlink interface gre: fix copy and paste error ...
2008-10-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits) MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq MIPS: Move ptrace prototypes to ptrace.h MIPS: Ptrace support for HARDWARE_WATCHPOINTS MIPS: Scheduler support for HARDWARE_WATCHPOINTS. MIPS: Watch exception handling for HARDWARE_WATCHPOINTS. MIPS: Probe watch registers and report configuration. MIPS: Add HARDWARE_WATCHPOINTS definitions and support code. MIPS: Add HARDWARE_WATCHPOINTS configure option. MIPS: Replace use of <asm-generic/uaccess.h> with native implementations. MIPS: TXx9: Add TX4939 ATA support (v2) MIPS: Rewrite spinlocks to ticket locks. MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment. MIPS: IP checksums: Remove unncessary .set pseudos MIPS: IP checksums: Remove unncessary folding of sum to 16 bit. MIPS: Move headfiles to new location below arch/mips/include MIPS: Alchemy: rename directory MIPS: Optimize get_user and put_user for 64-bit MIPS: TXx9: Implement prom_free_prom_memory MIPS: TXx9: Add RBTX4939 board support MIPS: TXx9: Add TX4939 SoC support ...
2008-10-11Merge branch 'for-linus' of git://git.alsa-project.org/alsa-kernelLinus Torvalds
* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits) ALSA: hda: VREF powerdown for headphones ALSA: hda: STAC_HP_M4 ALSA: ASoC: Check for machine type in GTA01 machine driver ALSA: mtpav - Fix race in probe ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk ALSA: Add a note on dependency of RTC stuff ALSA: ASoC: add new param mux to dapm_mux_update_power ALSA: Increase components array size ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver ALSA: hda: comment typo fix ALSA: hda: comment typo fix ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI ALSA: snd-usb-audio: support for Edirol UA-4FX device ALSA: usb - Fix possible Oops at USB-MIDI disconnection ALSA: hda - Fix another ALC889A (rev 0x100101) ALSA: hda: add more board-specific information for Realtek ALC662 rev1 ALSA: Correct Vladimir Barinov's e-mail address ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards ALSA: hda: SPDIF stream muting support ALSA: hda: appletv support ...
2008-10-11Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code [CPUFREQ] Don't export governors for default governor [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg() [CPUFREQ] use deferrable delayed work init in conservative governor [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put [CPUFREQ] add error handling for cpufreq_register_governor() error [CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c
2008-10-11MIPS: Move headfiles to new location below arch/mips/includeRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: Optimize get_user and put_user for 64-bitRalf Baechle
A long for the error value leads to unnecessary sign extensions. This patch shrinks an ip27_defconfig kernel build with gcc 4.3.0 by 2256 bytes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add RBTX4939 board supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/rbtx4939/Makefile create mode 100644 arch/mips/txx9/rbtx4939/irq.c create mode 100644 arch/mips/txx9/rbtx4939/prom.c create mode 100644 arch/mips/txx9/rbtx4939/setup.c create mode 100644 include/asm-mips/txx9/rbtx4939.h
2008-10-11MIPS: TXx9: Add TX4939 SoC supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/pci/pci-tx4939.c create mode 100644 arch/mips/txx9/generic/irq_tx4939.c create mode 100644 arch/mips/txx9/generic/setup_tx4939.c create mode 100644 include/asm-mips/txx9/tx4939.h
2008-10-11MIPS: TXx9: IOC LED supportAtsushi Nemoto
Add leds-gpio platform device for controlling LEDs connected to IOC on RBTX49XX and JMR3927 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Microoptimize interrupt handlersAtsushi Nemoto
The IOC interrupt status register on RBTX49XX only have 8 bits. Use 8-bit version of __fls() to optimize interrupt handlers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Convert to GPIO libFlorian Fainelli
This patch converts the rb532 code to use gpio library and register its gpio chip. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove unused rc32434_sync_delay and rc32434_sync_udelayFlorian Fainelli
This patch removes these two unused functions : rc32434_sync_delay and rc32434_sync_udelay Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup the headers againFlorian Fainelli
This patch cleans up headers and regroups informations to where they should reside. While moving, try to have a consistant naming for defines. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove gpio bootup stateFlorian Fainelli
We are no longer using gpio bootup state, so do not export it and do not parse the kernel command line tag for it. Instead we provide gpio-keys for the button the gpio bootup state was checking. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Use physical addresses for gpio and device controller registersFlorian Fainelli
This patch fixes the misuse of virtual addresses for the GPIO and third device controller which would lead to problems while accessing ioremap'd registers. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup and group definitions to their right placesFlorian Fainelli
This patch moves GPIO related definitions to gpio.h and IRQ related to irq.h Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Declare smsc_fdc37m81x_config_get() in smsc_fdc37m81x.hAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Default machine_restart using watchdog resetAtsushi Nemoto
Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Make spi_eeprom.c more genericAtsushi Nemoto
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
2008-10-11MIPS: TXx9: Raise priority of interrupts for errors, timers, SIOAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add mtd supportAtsushi Nemoto
Add helper routines to register physmap-flash platform devices for NOR flashes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Early command-line preprocessingAtsushi Nemoto
* Select board by command-line option or firmware environment variable. * Handle "masterclk=" option. * Add boards.h to centerize board_vec declaration. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 include/asm-mips/txx9/boards.h
2008-10-11MIPS: TXx9: Add prom_getenvAtsushi Nemoto
Add prom_getenv() which can be used for YAMON. This assumes other firmware should pass NULL for fw_arg2. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Improve handling of built-in and command-line argsAtsushi Nemoto
* Make prom_init_cmdline() static and be called from prom_init. * Append built-in args if the first character was '+'. * Drop command-line args if the first character of built-in was '-'. * Enclose args include spaces by quotes. * TX4938_NAND_BOOT is no longer needed. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RBTX4927: More explicit initializationAtsushi Nemoto
* Make sure all interrupts cleared on startup * Initialize some GPIOs Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: PMC MSP71XX gpio driversPatrick Glass
This new gpio driver for PMC-Sierra's MSP71xx SoC allows standard api calls for access to the general and extended gpio's. Signed-off-by: Patrick Glass <patrickglass@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
2008-10-11MIPS: Use compat_sys_ptraceThomas Bogendoerfer
This replaces mips's sys_ptrace32 with a compat_arch_ptrace and enables the new generic definition of compat_sys_ptrace instead. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-10ide: Remove ide_spin_wait_hwgroup() and use special requests insteadElias Oltmanns
Use a special request for serialisation purposes and get rid of the awkward ide_spin_wait_hwgroup(). This also involves converting the ide_devset structure so it can be shared by the /proc and the ioctl code. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> [bart: use rq->cmd[] directly] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h>Bartlomiej Zolnierkiewicz
While at it: * IDE{FLOPPY,TAPE}_WAIT_CMD -> WAIT_{FLOPPY,TAPE}_CMD * Use enum for WAIT_* defines. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_do_test_unit_ready() helperBartlomiej Zolnierkiewicz
* Add ide_do_test_unit_ready() helper and convert ide-{floppy,tape}.c to use it. * Remove no longer used idetape_create_test_unit_ready_cmd(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_do_start_stop() helperBartlomiej Zolnierkiewicz
* Add ide_do_start_stop() helper and convert ide-{floppy,tape}.c to use it. * Remove no longer used idefloppy_create_start_stop_cmd() and idetape_create_load_unload_cmd(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_set_media_lock() helperBartlomiej Zolnierkiewicz
* Set IDE_AFLAG_NO_DOORLOCK in idetape_get_mode_sense_result(), check it in ide_tape_set_media_lock() and cleanup idetape_create_prevent_cmd(). * Set IDE_AFLAG_NO_DOORLOCK in ide_floppy_create_read_capacity_cmd() and check it instead of IDE_AFLAG_CLIK_DRIVE in ide_floppy_set_media_lock(). * Add ide_set_media_lock() helper and convert ide-{floppy,tape}.c to use it. * Remove no longer used ide*_create_prevent_cmd()/ide*_set_media_lock(). * Update comment in <linux/ide.h> accordingly. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide-floppy: ->{srfp,wp} -> IDE_AFLAG_{SRFP,WP}Bartlomiej Zolnierkiewicz
Add IDE_AFLAG_{SRFP,WP} drive->atapi_flags and use them instead of ->{srfp,wp} struct ide_floppy_obj fields. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_queue_pc_tail() helperBartlomiej Zolnierkiewicz
* Add ide_queue_pc_tail() and convert ide-{floppy,tape}.c to use it instead of ide*_queue_pc_tail(). * Remove no longer used ide*_queue_pc_tail(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_queue_pc_head() helperBartlomiej Zolnierkiewicz
* Move REQ_IDETAPE_* enums to <linux/ide.h>. * Add ide_queue_pc_head() and convert ide-{floppy,tape}.c to use it instead of ide*_queue_pc_head(). * Remove no longer used ide*_queue_pc_head(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_init_pc() helperBartlomiej Zolnierkiewicz
* Add IDE_PC_BUFFER_SIZE define. * Add ide_init_pc() and convert ide-{floppy,tape}.c to use it instead of ide*_init_pc(). * Remove no longer used IDE*_PC_BUFFER_SIZE and ide*_init_pc(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_io_buffers() helperBartlomiej Zolnierkiewicz
* Make ->io_buffers method return number of bytes transferred. * Use ide_end_request() instead of idefloppy_end_request() in ide_floppy_io_buffers() and then move the call out to ide_pc_intr(). * Add ide_io_buffers() helper and convert ide-{floppy,scsi}.c to use it instead of ide*_io_buffers(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 18:36:23 +0000