aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-01-30x86: demacro asm-x86/pgalloc_32.hJeremy Fitzhardinge
Convert macros into inline functions, for better type-checking. This patch required a little bit of fiddling with headers in order to make __(pte|pmd)_free_tlb inline rather than macros. asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly use any pgalloc definitions. I removed this include to avoid an include cycle, but it may cause secondary compile failures by things depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one such place; there may be others. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add mm parameter to paravirt_alloc_pdJeremy Fitzhardinge
Add mm to paravirt_alloc_pd, partly to make it consistent with paravirt_alloc_pt, and because later changes will make use of it. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add support for the RDC R-321x SoCFlorian Fainelli
This patch adds support for the RDC R-321x system-on-chip, also known as R-861x-(G). It uses the generic GPIO API and has support for the on-chip hardware watchdog. Build-fix from: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30pci: add PCI identifiers for the RDC devicesFlorian Fainelli
This patch defines the PCI identifiers found in the RDC R-321x System-on-Chip. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add generic GPIO support to x86Florian Fainelli
This patch adds the generic GPIO support to the x86 architecture. We do the same as for MIPS, we let the machine override the gpio callbacks and provide defaults one in mach-generic. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: GEODE: update GPIO API to support setting multiple GPIOs at onceAndres Salomon
The existing Geode GPIO API only allows for updating one GPIO at once. There are instances where users want to update multiple GPIOs at once. With the current API, they are given two choices; either ignore the GPIO API: outl(0xc000, gpio_base + GPIO_OUTPUT_VAL); outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE); Alternatively, call each GPIO update separately: geode_gpio_set(14, GPIO_OUTPUT_VAL); geode_gpio_set(15, GPIO_OUTPUT_VAL); geode_gpio_set(14, GPIO_OUTPUT_ENABLE); geode_gpio_set(15, GPIO_OUTPUT_ENABLE); Neither are desirable. This patch changes the GPIO API to allow for setting of multiple GPIOs at once; rather than being passed an integer, we pass a bitmask and provide a translation function. The above code would now look like this: geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL); geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE); Since there are no upstream users of the GPIO API yet (afaik), best to change this now. This also adds a bit of sanity checking; it is no longer possible to use a GPIO above 28. Note the semantics of geode_gpio_isset() have changed: geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...) will only return true iff both GPIOs are set. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30x86/non-x86: percpu, node ids, apic ids x86.git fixupMike Travis
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86_32: trim memory by updating e820Yinghai Lu
when MTRRs are not covering the whole e820 table, we need to trim the RAM and need to update e820. reuse some code on 64-bit as well. here need to add early_get_cap and use it in early_cpu_detect, and move mtrr_bp_init early. The code successfully trimmed the memory map on Justin's system: from: [ 0.000000] BIOS-e820: 0000000100000000 - 000000022c000000 (usable) to: [ 0.000000] modified: 0000000100000000 - 0000000228000000 (usable) [ 0.000000] modified: 0000000228000000 - 000000022c000000 (reserved) According to Justin it makes quite a difference: | When I boot the box without any trimming it acts like a 286 or 386, | takes about 10 minutes to boot (using raptor disks). Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86, rtc: make CONFIG_HPET_EMULATE_RTC usable from modulesBernhard Walle
enabled, then interrupts don't work for the rtc-cmos driver which results in RTC_AIE*, RTC_PIE* and RTC_ALM being unusable. This affects hwclock from util-linux-ng at least on i386 since that uses RTC_PIE_ON. (For x86-64, a polling method is used for unknown reasons.) This patch series now 1. export the functions from arch/x86/kernel/hpet.c that the old char/rtc driver uses to work around that problem, 2. makes it possible to compile the old rtc driver as module, while still having CONFIG_HPET_EMULATE_RTC enabled and 3. makes use of the exported functions in (1) in the new rtc-cmos driver. This patch: This patch makes the RTC emulation functions in arch/x86/kernel/hpet.c usable for kernel modules. It - exports the functions (EXPORT_SYMBOL_GPL()), - adds an interface to register the interrupt callback function instead of using only a fixed callback function and - replaces the rtc_get_rtc_time() function which depends on CONFIG_RTC with a call to get_rtc_time() which is defined in include/asm-generic/rtc.h. The only dependency to CONFIG_RTC is the call to rtc_interrupt() which is removed by the next patch. After this, there's no (code) dependency of this functions to CONFIG_RTC=y any more. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change size of node ids from u8 to s16travis@sgi.com
Change the size of node ids for X86_64 from u8 to s16 to accomodate more than 32k nodes and allow for NUMA_NO_NODE (-1) to be sign extended to int. Cc: David Rientjes <rientjes@google.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: fix early cpu_to_node panic from nr_free_zone_pagesMike Travis
call early_cpu_to_node() since per_cpu(cpu_to_node_map) might not be setup yet. I also had to export x86_cpu_to_node_map_early_ptr because of some calls from the network code to numa_node_id(): net/ipv4/netfilter/arp_tables.c: net/ipv4/netfilter/ip_tables.c: net/ipv4/netfilter/ip_tables.c: Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: get_cycles() fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add debug of invalid per_cpu map accessesIngo Molnar
dont crash survivable situations. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add debug of invalid per_cpu map accessestravis@sgi.com
Provide a means to trap usages of per_cpu map variables before they are setup. Define CONFIG_DEBUG_PER_CPU_MAPS to activate. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change NR_CPUS arrays in numa_64 fixuptravis@sgi.com
Change the following static arrays sized by NR_CPUS to per_cpu data variables: char cpu_to_node_map[NR_CPUS]; fixup: - Split cpu_to_node function into "early" and "late" versions so that x86_cpu_to_node_map_early_ptr is not EXPORT'ed and the cpu_to_node inline function is more streamlined. - This also involves setting up the percpu maps as early as possible. - Fix X86_32 NUMA build errors that previous version of this patch caused. V2->V3: - add early_cpu_to_node function to keep cpu_to_node efficient - move and rename smp_set_apicids() to setup_percpu_maps() - call setup_percpu_maps() as early as possible V1->V2: - Removed extraneous casts - Fix !NUMA builds with '#ifdef CONFIG_NUMA" Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: convert TSC disabling to generic cpuid disable bitmapAndi Kleen
Fix from: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add framework to disable CPUID bits on the command lineAndi Kleen
There are already various options to disable specific cpuid bits on the command line. They all use their own variable. Add a generic mask to make this easier in the future. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: include/asm-x86/paravirt.h: x86_64 mmu operationsEduardo Habkost
Add .set_pgd field to pv_mmu_ops. Implement pud_val(), __pud(), set_pgd(), pud_clear(), pgd_clear(). pud_clear() and pgd_clear() are implemented simply using set_pud() and set_pmd(). They don't have a field at pv_mmu_ops. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change function orders in paravirt.hGlauber de Oliveira Costa
__pmd, pmd_val and set_pud are used before they are defined (as static) We move them a little up in the file, so it doesn't happen. Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: provide read and write cr8 paravirt hooksGlauber de Oliveira Costa
Since the cr8 manipulation functions ended up staying in the tree, they can't be defined just when PARAVIRT is off: In this patch, those functions are defined for the PARAVIRT case too. [ mingo@elte.hu: fixes ] Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: puts read and write cr8 into pv_cpu_opsGlauber de Oliveira Costa
This patch adds room for read and write_cr8 functions back in pv_cpu_ops struct Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: put generic mm_hooks include into PARAVIRTGlauber de Oliveira Costa
With PARAVIRT, we actually have arch_{dup,exit}_mmap functions, so we can't include the generic header Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: provide a native_init_IRQ function on 64-bitGlauber de Oliveira Costa
x86_64 lacks a native_init_IRQ() function, so we turn the arch's init_IRQ() function into a native construct Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: msr for AMD Fam 10h mmioYinghai Lu
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86, 32-bit: trim memory not covered by wb mtrrsJesse Barnes
On some machines, buggy BIOSes don't properly setup WB MTRRs to cover all available RAM, meaning the last few megs (or even gigs) of memory will be marked uncached. Since Linux tends to allocate from high memory addresses first, this causes the machine to be unusably slow as soon as the kernel starts really using memory (i.e. right around init time). This patch works around the problem by scanning the MTRRs at boot and figuring out whether the current end_pfn value (setup by early e820 code) goes beyond the highest WB MTRR range, and if so, trimming it to match. A fairly obnoxious KERN_WARNING is printed too, letting the user know that not all of their memory is available due to a likely BIOS bug. Something similar could be done on i386 if needed, but the boot ordering would be slightly different, since the MTRR code on i386 depends on the boot_cpu_data structure being setup. This patch fixes a bug in the last patch that caused the code to run on non-Intel machines (AMD machines apparently don't need it and it's untested on other non-Intel machines, so best keep it off). Further enhancements and fixes from: Yinghai Lu <Yinghai.Lu@Sun.COM> Andi Kleen <ak@suse.de> Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: print which shared library/executable faulted in segfault etc. messages v3Andi Kleen
They now look like: hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000] This makes it easier to pinpoint bugs to specific libraries. And printing the offset into a mapping also always allows to find the correct fault point in a library even with randomized mappings. Previously there was no way to actually find the correct code address inside the randomized mapping. Relies on earlier patch to shorten the printk formats. They are often now longer than 80 characters, but I think that's worth it. [includes fix from Eric Dumazet to check d_path error value] Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: optimize lock prefix switching to run less frequentlyAndi Kleen
On VMs implemented using JITs that cache translated code changing the lock prefixes is a quite costly operation that forces the JIT to throw away and retranslate a lot of code. Previously a SMP kernel would rewrite the locks once for each CPU which is quite unnecessary. This patch changes the code to never switch at boot in the normal case (SMP kernel booting with >1 CPU) or only once for SMP kernel on UP. This makes a significant difference in boot up performance on AMD SimNow! Also I expect it to be a little faster on native systems too because a smp switch does a lot of text_poke()s which each synchronize the pipeline. v1->v2: Rename max_cpus v1->v2: Fix off by one in UP check (Thomas Gleixner) Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: replace hard coded reservations in 64-bit early boot code with dynamic ↵Andi Kleen
table On x86-64 there are several memory allocations before bootmem. To avoid them stomping on each other they used to be all hard coded in bad_area(). Replace this with an array that is filled as needed. This cleans up the code considerably and allows to expand its use. Cc: peterz@infradead.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: rename stack_pointer to kernel_trap_spHarvey Harrison
Choose a less generic name for such a special case. Add a comment explaining the odd use in X86_32. Change the one user of stack_pointer. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: clean up ptrace.hHarvey Harrison
Leave definition of pt_regs in its own section, move all kernel code to section afterwards, unify prototype definitions, has some conditional prototypes to make it clear what was only defined in 32 and 64 bit. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: unify pt_regs accessors ptrace.hHarvey Harrison
Unify the definiton of: v8086_mode user_mode user_mode_vm stack_pointer instruction_pointer frame_pointer in ptrace.h to make it clear where the differences are between 32 and 64 bit. Changes macros to static inlines as well. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: kdump failureHiroshi Shimamoto
kdump needs ELF_CORE_COPY_REGS in crash_save_cpu(). This lack of the macro causes the following BUG. SysRq : Trigger a crashdump ------------[ cut here ]------------ kernel BUG at include/linux/elfcore.h:105! invalid opcode: 0000 [1] PREEMPT SMP Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86_32: remove the useless NR_syscalls macroDmitri Vorobiev
This is against current x86.git. The size of the system call table for 32-bit x86 kernels is obtained by compile-time calculation of the sys_call_table array, not from the value, which the NR_syscalls macro expands to. This trivial patch removes the fossil macro. Manually tested by grepping the x86 files for the "NR_syscalls" string. No relevant use cases found. Build-tested using allyesconfig, allnoconfig and a couple of randconfig instances. All builds successfully finished. Runtime test performed using a stripped-down Debian-ish config. The system booted successfully. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: 64-bit, remove redundant cpu_has_ definitionsKyle McMartin
PSE, PGE, XMM, XMM2, and FXSR are defined as required features, and will be optimized to a constant at compile time. Remove their redundant definitions. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/paravirt: make set_pud operation commonJeremy Fitzhardinge
Remove duplicate set_pud()s. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/paravirt: make set_pmd operation commonJeremy Fitzhardinge
Remove duplicate set_pmd()s. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/paravirt: make set_pte operations commonJeremy Fitzhardinge
Remove duplicate set_pte* operations. PAE still needs to have special variants of some of these because it can't atomically update a 64-bit pte, so there's still some duplication. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/paravirt: common implementation for pmd value opsJeremy Fitzhardinge
Remove duplicate __pmd/pmd_val functions. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/paravirt: common implementation for pgd value opsJeremy Fitzhardinge
Remove duplicate __pgd/pgd_val functions. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/paravirt: common implementation for pte value opsJeremy Fitzhardinge
Remove duplicate __pte/pte_val functions. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86/paravirt: rearrange common mmu_opsJeremy Fitzhardinge
Rearrange the various pagetable mmu_ops to remove duplication. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30add native_pud_val and _pmd_val for 2 and 3Jeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30arch/x86/mm/numa_64.c: section fixAndrew Morton
WARNING: vmlinux.o(__ksymtab+0x670): Section mismatch: reference to .init.data:x86_cpu_to_node_map_init (between '__ksymtab_x86_cpu_to_node_map_init' and '__ksymtab_node_data') Cc: Matthew Dobson <colpatch@us.ibm.com> Cc: Mike Travis <travis@sgi.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: reduce memory and intra-node effectsMike Travis
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: isolate PIC/PIT in/out callsAlan Cox
Rather than remove and/or mangle inb_p/outb_p we want to remove the use of them from inappropriate places. For the PIC/PIT this may eventually depend on 32/64bitism or similar so start by adding inb/outb_pit and inb/outb_pic so that we can make them use any scheme we settle on without disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can make inb_pit use udelay without messing up inb_p). Floppy already does this for the fdc. That really only leaves the CMOS as a core logic item to tackle, and bits of parallel port handling in the chipset layers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add ENDPROC() markersJohn Reiser
The ENDPROCs() were not used everywhere. Some code used just END() instead, while other code used nothing. um/sys-i386/checksum.S didn't #include <linux/linkage.h> . I also got confused because gcc puts the .type near the ENTRY, while ENDPROC puts it on the opposite end. Signed off by: John Reiser <jreiser@BitWagon.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: remove last user of get_segment_eipHarvey Harrison
is_prefetch was the last user of get_segment_eip and only on X86_32. This function returned the faulting instruction's address and set the upper segment limit. Instead, use the convert_ip_to_linear helper and rely on probe_kernel_address to do the segment checks which was already done everywhere the segment limit was being checked on X86_32. Remove get_segment_eip as well. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: common x86_32|64 namingHarvey Harrison
Rename convert_rip_to_linear to convert_ip_to_linear for shared X86_32|64 use. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change bios_cpu_apicid to percpu data variabletravis@sgi.com
Change static bios_cpu_apicid array to a per_cpu data variable. This includes using a static array used during initialization similar to the way x86_cpu_to_apicid[] is handled. There is one early use of bios_cpu_apicid in apic_is_clustered_box(). The other reference in cpu_present_to_apicid() is called after smp_set_apicids() has setup the percpu version of bios_cpu_apicid. [ mingo@elte.hu: build fix ] Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: change NR_CPUS arrays in numa_64travis@sgi.com
Change the following static arrays sized by NR_CPUS to per_cpu data variables: char cpu_to_node_map[NR_CPUS]; Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>