aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2008-04-27KVM: Add API for determining the number of supported memory slotsAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Increase vcpu count to 16Avi Kivity
With NPT support, scalability is much improved. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Add API to retrieve the number of supported vcpus per vmAvi Kivity
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: paravirtualized clocksource: host partGlauber de Oliveira Costa
This is the host part of kvm clocksource implementation. As it does not include clockevents, it is a fairly simple implementation. We only have to register a per-vcpu area, and start writing to it periodically. The area is binary compatible with xen, as we use the same shadow_info structure. [marcelo: fix bad_page on MSR_KVM_SYSTEM_TIME] [avi: save full value of the msr, even if enable bit is clear] [avi: clear previous value of time_page] Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: export the load_pdptrs() function to modulesJoerg Roedel
The load_pdptrs() function is required in the SVM module for NPT support. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: export information about NPT to generic x86 codeJoerg Roedel
The generic x86 code has to know if the specific implementation uses Nested Paging. In the generic code Nested Paging is called Two Dimensional Paging (TDP) to avoid confusion with (future) TDP implementations of other vendors. This patch exports the availability of TDP to the generic x86 code. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: make EFER_RESERVED_BITS configurable for architecture codeJoerg Roedel
This patch give the SVM and VMX implementations the ability to add some bits the guest can set in its EFER register. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: Use CONFIG_PREEMPT_NOTIFIERS around struct preempt_notifierHollis Blanchard
This allows kvm_host.h to be #included even when struct preempt_notifier is undefined. This is needed to build ppc asm-offsets.h. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: VMX: Enable Virtual Processor Identification (VPID)Sheng Yang
To allow TLB entries to be retained across VM entry and VM exit, the VMM can now identify distinct address spaces through a new virtual-processor ID (VPID) field of the VMCS. [avi: drop vpid_sync_all()] [avi: add "cc" to asm constraints] Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27KVM: MMU: Simplify hash table indexingDong, Eddie
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3: x86_64/mm: check and print vmemmap allocation continuous x86_64: fix setup_node_bootmem to support big mem excluding with memmap x86_64: make reserve_bootmem_generic() use new reserve_bootmem() mm: allow reserve_bootmem() cross nodes mm: offset align in alloc_bootmem() mm: fix alloc_bootmem_core to use fast searching for all nodes mm: make mem_map allocation continuous
2008-04-26x86_64/mm: check and print vmemmap allocation continuousYinghai Lu
On big systems with lots of memory, don't print out too much during bootup, and make it easy to find if it is continuous. on 256G 8 sockets system will get [ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0 [ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs [ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0 [ffffe20038700000-ffffe200387fffff] potential offnode page_structs [ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1 [ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2 [ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2 [ffffe20054700000-ffffe200547fffff] potential offnode page_structs [ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2 [ffffe20070700000-ffffe200707fffff] potential offnode page_structs [ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3 [ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4 [ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4 [ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs [ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4 [ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs [ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5 [ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6 [ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6 [ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs [ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6 [ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7 instead of a very long print out... Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26x86_64: fix setup_node_bootmem to support big mem excluding with memmapYinghai Lu
typical case: four sockets system, every node has 4g ram, and we are using: memmap=10g$4g to mask out memory on node1 and node2 when numa is enabled, early_node_mem is used to get node_data and node_bootmap. if it can not get memory from the same node with find_e820_area(), it will use alloc_bootmem to get buff from previous nodes. so check it and print out some info about it. need to move early_res_to_bootmem into every setup_node_bootmem. and it takes range that node has. otherwise alloc_bootmem could return addr that reserved early. depends on "mm: make reserve_bootmem can crossed the nodes". Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3: x86, bitops: select the generic bitmap search functions x86: include/asm-x86/pgalloc.h/bitops.h: checkpatch cleanups - formatting only x86: finalize bitops unification x86, UML: remove x86-specific implementations of find_first_bit x86: optimize find_first_bit for small bitmaps x86: switch 64-bit to generic find_first_bit x86: generic versions of find_first_(zero_)bit, convert i386 bitops: use __fls for fls64 on 64-bit archs generic: implement __fls on all 64-bit archs generic: introduce a generic __fls implementation x86: merge the simple bitops and move them to bitops.h x86, generic: optimize find_next_(zero_)bit for small constant-size bitmaps x86, uml: fix uml with generic find_next_bit for x86 x86: change x86 to use generic find_next_bit uml: Kconfig cleanup uml: fix build error
2008-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits) ide: constify struct ide_dma_ops ide: add struct ide_dma_ops (take 3) ide: add IDE_HFLAG_SERIALIZE_DMA host flag sl82c105: check bridge revision in sl82c105_init_one() au1xxx-ide: use ->init_dma method palm_bk3710: use ->init_dma method sgiioc4: use ->init_dma method icside: use ->init_dma method ide-pmac: use ->init_dma method ide: do complete DMA setup in ->init_dma method (take 2) au1xxx-ide: fix MWDMA support ide: cleanup ide_setup_dma() ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma() ide: export ide_allocate_dma_engine() ide: move ide_setup_dma() call out from ->init_dma method alim15x3: skip DMA initialization completely on revs < 0x20 pdc202xx_old: remove init_dma_pdc202xx() ide: don't display "BIOS" settings in ide_setup_dma() ide: remove ->cds field from ide_hwif_t (take 2) ide: remove ide_dma_iobase() ...
2008-04-26ide: constify struct ide_dma_opsBartlomiej Zolnierkiewicz
* Export ide_dma_exec_cmd() and __ide_dma_test_irq(). * Constify struct ide_dma_ops. * Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma() (it is later overriden by ide_init_port() if needed) and drop 'const struct ide_port_info *d' argument. While at it: * Rename __ide_dma_test_irq() to ide_dma_test_irq(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: add struct ide_dma_ops (take 3)Bartlomiej Zolnierkiewicz
Add struct ide_dma_ops and convert core code + drivers to use it. While at it: * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods. * Drop "ide_" "infixes" from DMA methods. * au1xxx-ide.c: - use auide_dma_{test_irq,end}() directly in auide_dma_timeout() * pdc202xx_old.c: - drop "old_" "infixes" from DMA methods * siimage.c: - add siimage_dma_test_irq() helper - print SATA warning in siimage_init_one() * Remove no longer needed ->init_hwif implementations. v2: * Changes based on review from Sergei: - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/ - s/drive->hwif/hwif/ in idefloppy_pc_intr(). - fix patch description w.r.t. au1xxx-ide changes - fix au1xxx-ide build - fix naming for cmd64*_dma_ops - drop "ide_" and "old_" infixes - s/hpt3xxx_dma_ops/hpt37x_dma_ops/ - s/hpt370x_dma_ops/hpt370_dma_ops/ - use correct DMA ops for HPT302/N, HPT371/N and HPT374 - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/ v3: * Two bugs slipped in v2 (noticed by Sergei): - use correct DMA ops for HPT374 (for real this time) - handle HPT370/HPT370A properly Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: add IDE_HFLAG_SERIALIZE_DMA host flagBartlomiej Zolnierkiewicz
* Add IDE_HFLAG_SERIALIZE_DMA host flag to serialize ports if DMA is available and handle it in ide_init_port(). * Convert sl82c105 host driver to use this new flag. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: do complete DMA setup in ->init_dma method (take 2)Bartlomiej Zolnierkiewicz
* Make ide_hwif_setup_dma() return an error value. * Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase' to ->init_dma method and make it return an error value. * Rename ide_get_or_set_dma_base() to ide_pci_dma_base(), change ordering of its arguments and then export it. * Export ide_pci_set_master(). * Do complete DMA setup inside ->init_dma method and update ->init_dma users accordingly. * Sanitize code for DMA setup in ide_init_port(). v2: * Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs (from Jiri Slaby <jirislaby@gmail.com>): Fix following compiler warning by returning EINVAL: In file included from ANYTHING-INCLUDING-IDE.H:45: include/linux/ide.h: In function ‘ide_hwif_setup_dma’: include/linux/ide.h:1022: warning: no return statement in function returning non-void Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26au1xxx-ide: fix MWDMA supportBartlomiej Zolnierkiewicz
Always use "fast" MWDMA support and remove dma_{black,white}_list (they were based on completely bogus ->ide_dma_check implementation which didn't set neither the host controller timings nor the device for the desired transfer mode). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: export ide_allocate_dma_engine()Bartlomiej Zolnierkiewicz
Export ide_allocate_dma_engine() and use it in trm290 host driver. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: remove ->cds field from ide_hwif_t (take 2)Bartlomiej Zolnierkiewicz
* Use hwif->name instead of cds->name in ide_allocate_dma_engine(). * Use pci_name(dev) instead of cds->name in init_dma_pdc202xx(). * Remove no longer needed ->cds field from ide_hwif_t. v2: * scc_pata.c also needs to be updated now (noticed by Stephen Rothwell). There should be no functional changes caused by this patch. Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: remove ->extra field from struct ide_port_infoBartlomiej Zolnierkiewicz
Always setup hwif->extra_base in ide_iomio_dma() and remove no longer needed ->extra field from struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: remove ide_hwif_request_regions()Bartlomiej Zolnierkiewicz
Remove no longer used ide_hwif_request_regions() and hwif_request_region(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: manage resources for PCI devices in ide_pci_enable() (take 3)Bartlomiej Zolnierkiewicz
* Reserve PCI BARs 0-3 (0-1 for single port controllers) in ide_pci_enable() and remove ide_hwif_request_regions() call from ide_device_add_all() (also cleanup resource management in scc_pata host driver). * Fix handling of PCI BAR 4 in ide_pci_enable(), then cleanup ide_iomio_dma() (+ init_hwif_trm290() in trm290 host driver) and remove ide_release[_iomio]_dma(). v2: * Fixup trm290 host driver. v3: * Because of scc_pata host driver changes we need to call pci_request_selected_regions() also in setup_mmio_scc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: remove ide_hwif_release_regions()Bartlomiej Zolnierkiewicz
All host drivers using ide_unregister()/module_exit() have been fixed to manage resources themselves so this function can be removed now. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: use ide_legacy_device_add() for qd65xx (take 2)Bartlomiej Zolnierkiewicz
* Add 'unsigned long config' argument to ide_legacy_device_add() for setting hwif->config_data. * Use ide_find_port_slot() instead of ide_find_port() in ide_legacy_device_add(). * Handle IDE_HFLAG_QD_2ND_PORT and IDE_HFLAG_SINGLE host flags in ide_legacy_device_add(). * Convert qd65xx host driver to use ide_legacy_device_add(). v2: * Update ali14xx, dtc2278, ht6560b and umc8672 host drivers. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: add ide_legacy_device_add() helperBartlomiej Zolnierkiewicz
Add ide_legacy_device_add() helper for use by legacy VLB host drivers (+ convert them to use it). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: remove ->noprobe field from ide_hwif_tBartlomiej Zolnierkiewicz
Update IDE PMAC host driver to use drive->noprobe instead of hwif->noprobe and remove hwif->noprobe completely (it is always set to zero now). There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: add struct ide_port_ops (take 2)Bartlomiej Zolnierkiewicz
* Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26x86, boot: add linked list of struct setup_dataHuang, Ying
This patch adds a field of 64-bit physical pointer to NULL terminated single linked list of struct setup_data to real-mode kernel header. This is used as a more extensible boot parameters passing mechanism. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26x86, boot: add free_early to early reservation machanismHuang, Ying
Add free_early to early reservation mechanism - this way early bootup failure paths can stop wasting memory. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26x86: include/asm-x86/pgalloc.h/bitops.h: checkpatch cleanups - formatting onlyJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: finalize bitops unificationAlexander van Heukelum
include/asm-x86/bitops_32.h and include/asm-x86/bitops_64.h are now almost identical. The 64-bit version sets ARCH_HAS_FAST_MULTIPLIER and has an extra inline function set_bit_string. The define currently has no influence on the generated code, but it can be argued that setting it on i386 is the right thing to do anyhow. The addition of the extra inline function on i386 does not hurt either. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86, UML: remove x86-specific implementations of find_first_bitAlexander van Heukelum
x86 has been switched to the generic versions of find_first_bit and find_first_zero_bit, but the original versions were retained. This patch just removes the now unused x86-specific versions. also update UML. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: optimize find_first_bit for small bitmapsAlexander van Heukelum
Avoid a call to find_first_bit if the bitmap size is know at compile time and small enough to fit in a single long integer. Modeled after an optimization in the original x86_64-specific code. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: switch 64-bit to generic find_first_bitAlexander van Heukelum
Switch x86_64 to generic find_first_bit. The x86_64-specific implementation is not removed. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: generic versions of find_first_(zero_)bit, convert i386Alexander van Heukelum
Generic versions of __find_first_bit and __find_first_zero_bit are introduced as simplified versions of __find_next_bit and __find_next_zero_bit. Their compilation and use are guarded by a new config variable GENERIC_FIND_FIRST_BIT. The generic versions of find_first_bit and find_first_zero_bit are implemented in terms of the newly introduced __find_first_bit and __find_first_zero_bit. This patch does not remove the i386-specific implementation, but it does switch i386 to use the generic functions by setting GENERIC_FIND_FIRST_BIT=y for X86_32. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26bitops: use __fls for fls64 on 64-bit archsAlexander van Heukelum
Use __fls for fls64 on 64-bit archs. The implementation for 64-bit archs is moved from x86_64 to asm-generic. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26generic: implement __fls on all 64-bit archsAlexander van Heukelum
Implement __fls on all 64-bit archs: alpha has an implementation of fls64. Added __fls(x) = fls64(x) - 1. ia64 has fls, but not __fls. Added __fls based on code of fls. mips and powerpc have __ilog2, which is the same as __fls. Added __fls = __ilog2. parisc, s390, sh and sparc64: Include generic __fls. x86_64 already has __fls. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26generic: introduce a generic __fls implementationAlexander van Heukelum
Add a generic __fls implementation in the same spirit as the generic __ffs one. It finds the last (most significant) set bit in the given long value. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: merge the simple bitops and move them to bitops.hAlexander van Heukelum
Some of those can be written in such a way that the same inline assembly can be used to generate both 32 bit and 64 bit code. For ffs and fls, x86_64 unconditionally used the cmov instruction and i386 unconditionally used a conditional branch over a mov instruction. In the current patch I chose to select the version based on the availability of the cmov instruction instead. A small detail here is that x86_64 did not previously set CONFIG_X86_CMOV=y. Improved comments for ffs, ffz, fls and variations. Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86, generic: optimize find_next_(zero_)bit for small constant-size bitmapsAlexander van Heukelum
This moves an optimization for searching constant-sized small bitmaps form x86_64-specific to generic code. On an i386 defconfig (the x86#testing one), the size of vmlinux hardly changes with this applied. I have observed only four places where this optimization avoids a call into find_next_bit: In the functions return_unused_surplus_pages, alloc_fresh_huge_page, and adjust_pool_surplus, this patch avoids a call for a 1-bit bitmap. In __next_cpu a call is avoided for a 32-bit bitmap. That's it. On x86_64, 52 locations are optimized with a minimal increase in code size: Current #testing defconfig: 146 x bsf, 27 x find_next_*bit text data bss dec hex filename 5392637 846592 724424 6963653 6a41c5 vmlinux After removing the x86_64 specific optimization for find_next_*bit: 94 x bsf, 79 x find_next_*bit text data bss dec hex filename 5392358 846592 724424 6963374 6a40ae vmlinux After this patch (making the optimization generic): 146 x bsf, 27 x find_next_*bit text data bss dec hex filename 5392396 846592 724424 6963412 6a40d4 vmlinux [ tglx@linutronix.de: build fixes ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: change x86 to use generic find_next_bitAlexander van Heukelum
The versions with inline assembly are in fact slower on the machines I tested them on (in userspace) (Athlon XP 2800+, p4-like Xeon 2.8GHz, AMD Opteron 270). The i386-version needed a fix similar to 06024f21 to avoid crashing the benchmark. Benchmark using: gcc -fomit-frame-pointer -Os. For each bitmap size 1...512, for each possible bitmap with one bit set, for each possible offset: find the position of the first bit starting at offset. If you follow ;). Times include setup of the bitmap and checking of the results. Athlon Xeon Opteron 32/64bit x86-specific: 0m3.692s 0m2.820s 0m3.196s / 0m2.480s generic: 0m2.622s 0m1.662s 0m2.100s / 0m1.572s If the bitmap size is not a multiple of BITS_PER_LONG, and no set (cleared) bit is found, find_next_bit (find_next_zero_bit) returns a value outside of the range [0, size]. The generic version always returns exactly size. The generic version also uses unsigned long everywhere, while the x86 versions use a mishmash of int, unsigned (int), long and unsigned long. Using the generic version does give a slightly bigger kernel, though. defconfig: text data bss dec hex filename x86-specific: 4738555 481232 626688 5846475 5935cb vmlinux (32 bit) generic: 4738621 481232 626688 5846541 59360d vmlinux (32 bit) x86-specific: 5392395 846568 724424 6963387 6a40bb vmlinux (64 bit) generic: 5392458 846568 724424 6963450 6a40fa vmlinux (64 bit) Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-optimized-inlining * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-optimized-inlining: generic: make optimized inlining arch-opt-in x86: add optimized inlining
2008-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (61 commits) ide: sanitize handling of IDE_HFLAG_NO_SET_MODE host flag sis5513: fail early for unsupported chipsets it821x: fix kzalloc() failure handling qd65xx: use IDE_HFLAG_SINGLE host flag qd65xx: always use ->selectproc method ide-cd: put proc-related functions together under single ifdef ide-cd: Replace __FUNCTION__ with __func__ IDE: Coding Style fixes to drivers/ide/ide-cd.c IDE: Coding Style fixes to drivers/ide/pci/cy82c693.c IDE: Coding Style fixes to drivers/ide/pci/it8213.c IDE: Coding Style fixes to drivers/ide/ide-floppy.c IDE: Coding Style fixes to drivers/ide/legacy/ali14xx.c IDE: Coding Style fixes to drivers/ide/legacy/hd.c IDE: Coding Style fixes to drivers/ide/pci/cmd640.c IDE: Coding Style fixes to drivers/ide/pci/opti621.c IDE: Coding Style fixes to drivers/ide/ide-pnp.c IDE: Coding Style fixes to drivers/ide/ide-proc.c IDE: Coding Style fixes to drivers/ide/legacy/ide-4drives.c IDE: Coding Style fixes to drivers/ide/legacy/umc8672.c IDE: Coding Style fixes to drivers/ide/pci/generic.c ...
2008-04-26generic: make optimized inlining arch-opt-inIngo Molnar
Stephen Rothwell reported that linux-next did not build on powerpc64. make optimized inlining dependent on architecture opt-in. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86: add optimized inliningIngo Molnar
add CONFIG_OPTIMIZE_INLINING=y. allow gcc to optimize the kernel image's size by uninlining functions that have been marked 'inline'. Previously gcc was forced by Linux to always-inline these functions via a gcc attribute: #define inline inline __attribute__((always_inline)) Especially when the user has already selected CONFIG_OPTIMIZE_FOR_SIZE=y this can make a huge difference in kernel image size (using a standard Fedora .config): text data bss dec hex filename 5613924 562708 3854336 10030968 990f78 vmlinux.before 5486689 562708 3854336 9903733 971e75 vmlinux.after that's a 2.3% text size reduction (!). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26ide: remove hwif->straight8 flagBartlomiej Zolnierkiewicz
All host drivers now either set hwif->mmio or reserve continuous I/O resources so remove no longer needed hwif->straight8 flag and never reached code for 'hwif->straight8 == 0' case. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-26ide: remove IDE_HFLAG_CY82C693 host flagBartlomiej Zolnierkiewicz
Sergei suggested that it shouldn't be necessary + it had no effect anyway since ide_id_dma_bug() is called earlier in ide_tune_dma(). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>