aboutsummaryrefslogtreecommitdiff
path: root/kernel/irq
AgeCommit message (Collapse)Author
2008-10-16generic: add irq_desc in function in parameterYinghai Lu
So we could remove some duplicated calling to irq_desc v2: make sure irq_desc in init/main.c is not used without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: remove >= nr_irqs checking with config_have_sparse_irqYinghai Lu
remove irq limit checks - nr_irqs is dynamic and we expand anytime. v2: fix checking about result irq_cfg_without_new, so could use msi again v3: use irq_desc_without_new to check irq is valid Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: replace loop with nr_irqs with for_each_irq_descYinghai Lu
There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: add irq_desc_without_newYinghai Lu
add an irq_desc accessor that will not allocate any sparse entry but returns failure if there's no entry present. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: move kstat_irqs from kstat to irq_descYinghai Lu
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: sparse irqs, fix IRQ auto-probe crashIngo Molnar
fix: [ 10.631533] calling yenta_socket_init+0x0/0x20 [ 10.631533] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012] [ 10.631533] Yenta: Using INTVAL to route CSC interrupts to PCI [ 10.631533] Yenta: Routing CardBus interrupts to PCI [ 10.631533] Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64 [ 10.731599] BUG: unable to handle kernel NULL pointer dereference at 00000040 [ 10.731838] IP: [<c0c95b5f>] _spin_lock_irq+0xf/0x20 [ 10.732221] *pde = 00000000 [ 10.732741] Oops: 0002 [#1] SMP [ 10.733453] [ 10.734253] Pid: 1, comm: swapper Tainted: G W (2.6.27-rc3-tip-00173-gd7eaa4f-dirty #1) [ 10.735188] EIP: 0060:[<c0c95b5f>] EFLAGS: 00010002 CPU: 0 [ 10.735523] EIP is at _spin_lock_irq+0xf/0x20 [ 10.735523] EAX: 00000040 EBX: 00000000 ECX: f6e04c90 EDX: 00000100 [ 10.735523] ESI: 000000df EDI: f6e04c90 EBP: f7867df0 ESP: f7867df0 [ 10.735523] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 10.735523] Process swapper (pid: 1, ti=f7867000 task=f7870000 task.ti=f7867000) [ 10.735523] Stack: f7867e04 c0155fbd 00000000 00000000 f6e04c90 f7867e5c c0c6e319 c0f6a074 [ 10.735523] f6e04c90 000017aa 00002012 c112b648 f791f240 c112b5e0 f7867e44 c010440b [ 10.735523] f791f240 f791f29c c112b8ec f791f240 00000000 f7867e5c c048f893 03c0b648 [ 10.735523] Call Trace: [ 10.735523] [<c0155fbd>] ? probe_irq_on+0x3d/0x140 [ 10.735523] [<c0c6e319>] ? yenta_probe+0x529/0x640 [ 10.735523] [<c010440b>] ? mcount_call+0x5/0xa [ 10.735523] [<c048f893>] ? pci_match_device+0xa3/0xb0 [ 10.735523] [<c048fc1e>] ? pci_device_probe+0x5e/0x80 [ 10.735523] [<c0515423>] ? driver_probe_device+0x83/0x180 [ 10.735523] [<c0515594>] ? __driver_attach+0x74/0x80 [ 10.735523] [<c0514b69>] ? bus_for_each_dev+0x49/0x70 [ 10.735523] [<c051528e>] ? driver_attach+0x1e/0x20 [ 10.735523] [<c0515520>] ? __driver_attach+0x0/0x80 [ 10.735523] [<c05150d3>] ? bus_add_driver+0x1a3/0x220 [ 10.735523] [<c048fb60>] ? pci_device_remove+0x0/0x40 [ 10.735523] [<c05157f4>] ? driver_register+0x54/0x130 [ 10.735523] [<c048fe2f>] ? __pci_register_driver+0x4f/0x90 [ 10.735523] [<c11e9419>] ? yenta_socket_init+0x19/0x20 [ 10.735523] [<c0101125>] ? do_one_initcall+0x35/0x160 [ 10.735523] [<c11e9400>] ? yenta_socket_init+0x0/0x20 [ 10.735523] [<c01391a6>] ? __queue_work+0x36/0x50 [ 10.735523] [<c013922d>] ? queue_work_on+0x3d/0x50 [ 10.735523] [<c11a2758>] ? kernel_init+0x148/0x210 [ 10.735523] [<c11a2610>] ? kernel_init+0x0/0x210 [ 10.735523] [<c01043f3>] ? kernel_thread_helper+0x7/0x10 [ 10.735523] ======================= [ 10.735523] Code: 10 38 f2 74 06 f3 90 8a 10 eb f6 5d 89 c8 c3 8d b6 00 00 00 00 8d bc 27 00 00 00 00 55 89 e5 e8 a4 e8 46 ff fa ba 00 01 00 00 90 <66> 0f c1 10 38 f2 74 06 f3 90 8a 10 eb f6 5d c3 90 55 89 e5 53 as auto-probing wants to iterate over existing irqs. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: sparse irqs: use irq_desc() together with dyn_array, instead of ↵Yinghai Lu
irq_desc[] add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: sparse irqs, export nr_irqsIngo Molnar
fix: Building modules, stage 2. MODPOST 458 modules ERROR: "nr_irqs" [drivers/serial/8250.ko] undefined! Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: make irq_desc to use dyn_arrayYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16irq: introduce nr_irqsYinghai Lu
at this point nr_irqs is equal NR_IRQS convert a few easy users from NR_IRQS to dynamic nr_irqs. v2: according to Eric, we need to take care of arch without generic_hardirqs Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16Merge branch 'linus' into genirqIngo Molnar
2008-10-02genirq: record trigger typeDavid Brownell
Genirq hasn't previously recorded the trigger type used by any given IRQ, although some irq_chip support has done so. That data can be useful when troubleshooting. This patch records it in the relevant irq_desc.status bits, and improves consistency between the two driver-visible calls affected: - Make set_irq_type() usage match request_irq() usage: * IRQ_TYPE_NONE should be a NOP; succeed, so irq_chip methods won't have to handle that case any more (many do it wrong). * IRQ_TYPE_PROBE is ignored; any buggy out-of-tree callers might need to switch over to the real IRQ probing code. * emit the same diagnostics (from shared utility code) - Their kerneldoc now reflects usage: * request_irq() flags include IRQF_TRIGGER_* to specify active edge(s)/level ... docs previously omitted that * set_irq_type() is declared in <linux/irq.h> so callers should use the (bit-equivalent) IRQ_TYPE_* symbols there Also: adds a warning about shared IRQs that don't end up using the requested trigger mode; and fix an unrelated "sparse" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-02Merge commit 'v2.6.27-rc8' into genirqIngo Molnar
2008-09-06genirq: irq_chip->startup() usage in setup_irq and set_irq_chained handlerPawel MOLL
This patch clarifies usage of irq_chip->startup() callback: 1. The "if (startup) startup(); else enabled();" code in setup_irq() is unnecessary, as startup() falls back to enabled() via default callbacks, set by irq_chip_set_defaults(). 2. When using set_irq_chained_handler() the startup() was never called, which is not good at all... Fixed. And again - when startup() is not defined the call will fall back to enable() than to unmask() via default callbacks. Signed-off-by: Pawel Moll <pawel.moll@st.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-22genirq: fix irq_desc->depth handling with DEBUG_SHIRQAnton Vorontsov
When DEBUG_SHIRQ is selected, a spurious IRQ is issued before the setup_irq() initializes the desc->depth. An IRQ handler may call disable_irq_nosync(), but then setup_irq() will overwrite desc->depth, and upon enable_irq() we'll catch this WARN: ------------[ cut here ]------------ Badness at kernel/irq/manage.c:180 NIP: c0061ab8 LR: c0061f10 CTR: 00000000 REGS: cf83be50 TRAP: 0700 Not tainted (2.6.27-rc3-23450-g74919b0) MSR: 00021032 <ME,IR,DR> CR: 22042022 XER: 20000000 TASK = cf829100[5] 'events/0' THREAD: cf83a000 GPR00: c0061f10 cf83bf00 cf829100 c038e674 00000016 00000000 cf83bef8 00000038 GPR08: c0298910 00000000 c0310d28 cf83a000 00000c9c 1001a1a8 0fffe000 00800000 GPR16: ffffffff 00000000 007fff00 00000000 007ffeb0 c03320a0 c031095c c0310924 GPR24: cf8292ec cf807190 cf83a000 00009032 c038e6a4 c038e674 cf99b1cc c038e674 NIP [c0061ab8] __enable_irq+0x20/0x80 LR [c0061f10] enable_irq+0x50/0x70 Call Trace: [cf83bf00] [c038e674] irq_desc+0x630/0x9000 (unreliable) [cf83bf10] [c0061f10] enable_irq+0x50/0x70 [cf83bf30] [c01abe94] phy_change+0x68/0x108 [cf83bf50] [c0046394] run_workqueue+0xc4/0x16c [cf83bf90] [c0046834] worker_thread+0x74/0xd4 [cf83bfd0] [c004ab7c] kthread+0x48/0x84 [cf83bff0] [c00135e0] kernel_thread+0x44/0x60 Instruction dump: 4e800020 3d20c031 38a94214 4bffffcc 9421fff0 7c0802a6 93e1000c 7c7f1b78 90010014 8123001c 2f890000 409e001c <0fe00000> 80010014 83e1000c 38210010 That trace corresponds to this line: WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n", irq); The patch fixes the problem by moving the SHIRQ code below the setup_irq(). Unfortunately we can't easily move the SHIRQ code inside the setup_irq(), since it grabs a spinlock, so to prvent a 'real' IRQ from interfere us we should disable that IRQ. p.s. The driver in question is drivers/net/phy/phy.c. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14Merge branch 'linus' into x86/coreIngo Molnar
Conflicts: arch/x86/kernel/genapic_64.c include/asm-x86/kvm_host.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-12genirq: switch /proc/irq/*/smp_affinity et al to seqfilesAlexey Dobriyan
Switch /proc/irq/*/smp_affinity , /proc/irq/default_smp_affinity to seq_files. cat(1) reads with 1024 chunks by default, with high enough NR_CPUS, there will be -EINVAL. As side effect, there are now two less users of the ->read_proc interface. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Paul Jackson <pj@sgi.com> Cc: Mike Travis <travis@sgi.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-05genirq: better warning on irqchip->set_type() failureDavid Brownell
While I'm glad to finally see the hole fixed whereby passing an invalid IRQ trigger type to request_irq() would be ignored, the current diagnostic isn't quite useful. Fixed by also listing the trigger type which was rejected. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30Merge commit 'v2.6.27-rc1' into x86/coreIngo Molnar
Conflicts: include/asm-x86/dma-mapping.h include/asm-x86/namei.h include/asm-x86/uaccess.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26use WARN() in kernel/irq/chip.cArjan van de Ven
Use WARN() instead of a printk+WARN_ON() pair; this way the message becomes part of the warning section for better reporting/collection. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26Use WARN() in kernel/irq/manage.cArjan van de Ven
Replace a printk+WARN_ON() by a WARN(); this increases the chance of the string making it into the bugreport (ie: it goes inside the ---[ cut here ]--- section) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26Merge branch 'x86/x2apic' into x86/coreIngo Molnar
Conflicts: include/asm-x86/i8259.h include/asm-x86/msidef.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-25kernel/irq/manage.c: replace a printk + WARN_ON() to a WARN()Arjan van de Ven
Replace a printk+WARN_ON() by a WARN(); this increases the chance of the string making it into the bugreport (ie: it goes inside the ---[ cut here ]--- section) Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge branch 'linus' into x86/x2apicIngo Molnar
Conflicts: drivers/pci/dmar.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24generic irqs: handle failure of irqchip->set_type in setup_irqUwe Kleine-König
set_type returns an int indicating success or failure, but up to now setup_irq ignores that. In my case this resulted in a machine hang: gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but arm/ns9xxx can only trigger on one direction so set_type didn't touch the configuration which happens do default to a level sensitiveness and returned -EINVAL. setup_irq ignored that and unmasked the irq. This resulted in an endless triggering of the gpio-key interrupt service routine which effectively killed the machine. With this patch applied setup_irq propagates the error to the caller. Note that before in the case chip && !chip->set_type && !chip->name a NULL pointer was feed to printk. This is fixed, too. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23set_irq_wake: fix return code and wake status trackingUwe Kleine-König
Since 15a647eba94c3da27ccc666bea72e7cca06b2d19 set_irq_wake returned -ENXIO if another device had it already enabled. Zero is the right value to return in this case. Moreover the change to desc->status was not reverted if desc->chip->set_wake returned an error. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22genirq: remove last NO_IDLE_HZ leftoversThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-18Merge branch 'linus' into x86/x2apicIngo Molnar
2008-07-18genirq: enable polling for disabled screaming irqsEric W. Biederman
When we disable a screaming irq we never see it again. If the irq line is shared or if the driver half works this is a real pain. So periodically poll the handlers for screaming interrupts. I use a timer instead of the classic irq poll technique of working off the timer interrupt because when we use the local apic timers note_interrupt is never called (bug?). Further on a system with dynamic ticks the timer interrupt might not even fire unless there is a timer telling it it needs to. I forced this case on my test system with an e1000 nic and my ssh session remained responsive despite the interrupt handler only being called every 10th of a second. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x64, x2apic/intr-remap: generic irq migration support from process contextSuresh Siddha
Generic infrastructure for migrating the irq from the process context in the presence of CONFIG_GENERIC_PENDING_IRQ. This will be used later for migrating irq in the presence of interrupt-remapping. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-10genirq: remove extraneous checks in manage.cThomas Gleixner
In http://bugzilla.kernel.org/show_bug.cgi?id=9580 it was pointed out that the desc->chip checks are extraneous. In fact these are left overs from early development and can be removed safely. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-05genirq: Expose default irq affinity mask (take 3)Max Krasnyansky
Current IRQ affinity interface does not provide a way to set affinity for the IRQs that will be allocated/activated in the future. This patch creates /proc/irq/default_smp_affinity that lets users set default affinity mask for the newly allocated IRQs. Changing the default does not affect affinity masks for the currently active IRQs, they have to be changed explicitly. Updated based on Paul J's comments and added some more documentation. Signed-off-by: Max Krasnyansky <maxk@qualcomm.com> Cc: pj@sgi.com Cc: a.p.zijlstra@chello.nl Cc: tglx@linutronix.de Cc: rdunlap@xenotime.net Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-02genirq: reenable a nobody cared disabled irq when a new driver arrivesThomas Gleixner
Uwe Kleine-Koenig has some strange hardware where one of the shared interrupts can be asserted during boot before the appropriate driver loads. Requesting the shared irq line from another driver result in a spurious interrupt storm which finally disables the interrupt line. I have seen similar behaviour on resume before (the hardware does not work anymore so I can not verify). Change the spurious disable logic to increment the disable depth and mark the interrupt with an extra flag which allows us to reenable the interrupt when a new driver arrives which requests the same irq line. In the worst case this will disable the irq again via the spurious trap, but there is a decent chance that the new driver is the one which can handle the already asserted interrupt and makes the box usable again. Eric Biederman said further: This case also happens on a regular basis in kdump kernels where we deliberately don't shutdown the hardware before starting the new kernel. This patch should reduce the need for using irqpoll in that situation by a small amount. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-and-Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
2008-04-29kernel: explicitly include required header files under kernel/Robert P. J. Day
Following an experimental deletion of the unnecessary directive #include <linux/slab.h> from the header file <linux/percpu.h>, these files under kernel/ were exposed as needing to include one of <linux/slab.h> or <linux/gfp.h>, so explicit includes were added where necessary. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19cpumask: Cleanup more uses of CPU_MASK and NODE_MASKMike Travis
* Replace usages of CPU_MASK_NONE, CPU_MASK_ALL, NODE_MASK_NONE, NODE_MASK_ALL to reduce stack requirements for large NR_CPUS and MAXNODES counts. * In some cases, the cpumask variable was initialized but then overwritten with another value. This is the case for changes like this: - cpumask_t oldmask = CPU_MASK_ALL; + cpumask_t oldmask; Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-19genirq: do not leave interupts enabled on free_irqThomas Gleixner
The default_disable() function was changed in commit: 76d2160147f43f982dfe881404cfde9fd0a9da21 genirq: do not mask interrupts by default It removed the mask function in favour of the default delayed interrupt disabling. Unfortunately this also broke the shutdown in free_irq() when the last handler is removed from the interrupt for those architectures which rely on the default implementations. Now we can end up with a enabled interrupt line after the last handler was removed, which can result in spurious interrupts. Fix this by adding a default_shutdown function, which is only installed, when the irqchip implementation does provide neither a shutdown nor a disable function. [@stable: affected versions: .21 - .24 ] Pointed-out-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org Tested-by: Michael Hennerich <Michael.Hennerich@analog.com>
2008-02-19genirq: spurious.c: use time_* macrosS.Caglar Onur
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So following patch implements usage of the time_after() macro, defined at linux/jiffies.h, which deals with wrapping correctly Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-08IRQ_NOPROBE helper functionsRalf Baechle
Probing non-ISA interrupts using the handle_percpu_irq as their handle_irq method may crash the system because handle_percpu_irq does not check IRQ_WAITING. This for example hits the MIPS Qemu configuration. This patch provides two helper functions set_irq_noprobe and set_irq_probe to set rsp. clear the IRQ_NOPROBE flag. The only current caller is MIPS code but this really belongs into generic code. As an aside, interrupt probing these days has become a mostly obsolete if not dangerous art. I think Linux interrupts should be changed to default to non-probing but that's subject of this patch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-and-tested-by: Rob Landley <rob@landley.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08kernel: remove fastcall in kernel/*Harvey Harrison
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30genirq: stackdump after the "Trying to free already-free IRQ" messageIngo Molnar
these bugs are harder to find than they seem, a stackdump helps. make it dependent on CONFIG_DEBUG_SHIRQ so that people can turn it off if it annoys them. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: add /proc/irq/*/spurious to dump the spurious irq debugging stateAndi Kleen
This is useful to debug problems with interrupt handlers that return sometimes IRQ_NONE. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30genirq: turn irq debugging options into module paramsAndi Kleen
This allows to change them at runtime using sysfs. No need to reboot to set them. I only added aliases (kernel.noirqdebug etc.) so the old options still work. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-12-18genirq: revert lazy irq disable for simple irqsSteven Rostedt
In commit 76d2160147f43f982dfe881404cfde9fd0a9da21 lazy irq disabling was implemented, and the simple irq handler had a masking set to it. Remy Bohmer discovered that some devices in the ARM architecture would trigger the mask, but never unmask it. His patch to do the unmasking was questioned by Russell King about masking simple irqs to begin with. Looking further, it was discovered that the problems Remy was seeing was due to improper use of the simple handler by devices, and he later submitted patches to fix those. But the issue that was uncovered was that the simple handler should never mask. This patch reverts the masking in the simple handler. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-14__do_IRQ does not check IRQ_DISABLED when IRQ_PER_CPU is setRuss Anderson
In __do_IRQ(), the normal case is that IRQ_DISABLED is checked and if set the handler (handle_IRQ_event()) is not called. Earlier in __do_IRQ(), if IRQ_PER_CPU is set the code does not check IRQ_DISABLED and calls the handler even though IRQ_DISABLED is set. This behavior seems unintentional. One user encountering this behavior is the CPE handler (in arch/ia64/kernel/mca.c). When the CPE handler encounters too many CPEs (such as a solid single bit error), it sets up a polling timer and disables the CPE interrupt (to avoid excessive overhead logging the stream of single bit errors). disable_irq_nosync() is called which sets IRQ_DISABLED. The IRQ_PER_CPU flag was previously set (in ia64_mca_late_init()). The net result is the CPE handler gets called even though it is marked disabled. If the behavior of not checking IRQ_DISABLED when IRQ_PER_CPU is set is intentional, it would be worthy of a comment describing the intended behavior. disable_irq_nosync() does call chip->disable() to provide a chipset specifiec interface for disabling the interrupt, which avoids this issue when used. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23Fix synchronize_irq races with IRQ handlerHerbert Xu
As it is some callers of synchronize_irq rely on memory barriers to provide synchronisation against the IRQ handlers. For example, the tg3 driver does tp->irq_sync = 1; smp_mb(); synchronize_irq(); and then in the IRQ handler: if (!tp->irq_sync) netif_rx_schedule(dev, &tp->napi); Unfortunately memory barriers only work well when they come in pairs. Because we don't actually have memory barriers on the IRQ path, the memory barrier before the synchronize_irq() doesn't actually protect us. In particular, synchronize_irq() may return followed by the result of netif_rx_schedule being made visible. This patch (mostly written by Linus) fixes this by using spin locks instead of memory barries on the synchronize_irq() path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Compile handle_percpu_irq even for uniprocessor kernelsRalf Baechle
Compiling handle_percpu_irq only on uniprocessor generates an artificial special case so a typical use like: set_irq_chip_and_handler(irq, &some_irq_type, handle_percpu_irq); needs to be conditionally compiled only on SMP systems as well and an alternative UP construct is usually needed - for no good reason. This fixes uniprocessor configurations for some MIPS SMP systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Fix CONFIG_DEBUG_SHIRQ trigger on free_irq()David Woodhouse
Andy Gospodarek pointed out that because we return in the middle of the free_irq() function, we never actually do call the IRQ handler that just got deregistered. This should fix it, although I expect Andrew will want to convert those 'return's to 'break'. That's a separate change though. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31request_irq: fix DEBUG_SHIRQ handlingJarek Poplawski
Mariusz Kozlowski reported lockdep's warning: > ================================= > [ INFO: inconsistent lock state ] > 2.6.23-rc2-mm1 #7 > --------------------------------- > inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. > ifconfig/5492 [HC0[0]:SC0[0]:HE1:SE1] takes: > (&tp->lock){+...}, at: [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too] > {in-hardirq-W} state was registered at: > [<c0138eeb>] __lock_acquire+0x949/0x11ac > [<c01397e7>] lock_acquire+0x99/0xb2 > [<c0452ff3>] _spin_lock+0x35/0x42 > [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too] > [<c0147a5d>] handle_IRQ_event+0x28/0x59 > [<c01493ca>] handle_level_irq+0xad/0x10b > [<c0105a13>] do_IRQ+0x93/0xd0 > [<c010441e>] common_interrupt+0x2e/0x34 ... > other info that might help us debug this: > 1 lock held by ifconfig/5492: > #0: (rtnl_mutex){--..}, at: [<c0451778>] mutex_lock+0x1c/0x1f > > stack backtrace: ... > [<c0452ff3>] _spin_lock+0x35/0x42 > [<de8706e0>] rtl8139_interrupt+0x27/0x46b [8139too] > [<c01480fd>] free_irq+0x11b/0x146 > [<de871d59>] rtl8139_close+0x8a/0x14a [8139too] > [<c03bde63>] dev_close+0x57/0x74 ... This shows that a driver's irq handler was running both in hard interrupt and process contexts with irqs enabled. The latter was done during free_irq() call and was possible only with CONFIG_DEBUG_SHIRQ enabled. This was fixed by another patch. But similar problem is possible with request_irq(): any locks taken from irq handler could be vulnerable - especially with soft interrupts. This patch fixes it by disabling local interrupts during handler's run. (It seems, disabling softirqs should be enough, but it needs more checking on possible races or other special cases). Reported-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22free_irq(): fix DEBUG_SHIRQ handlingAndrew Morton
If we're going to run the handler from free_irq() then we must do it with local irq's disabled. Otherwise lockdep complains that the handler is taking irq-safe spinlocks in a non-irq-safe fashion. Cc: Ingo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-12genirq: suppress resend of level interruptsThomas Gleixner
Level type interrupts are resent by the interrupt hardware when they are still active at irq_enable(). Suppress the resend mechanism for interrupts marked as level. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-10 00:18:45 +0000